氮掺杂HTi2NbO7纳米片的制备及其可见光催化性能

首先,采用高温固相法制备层状前驱体CsTi_2NbO_7,再通过与硝酸进行质子交换形成层状HTi_2NbO_7;其次,在四丁基氢氧化铵(TBAOH)中剥离层状HTi_2NbO_7以获得HTi_2NbO_7纳米片;然后与尿素混合并高温焙烧;最后成功地得到了氮掺杂的HTi_2NbO_7纳米片光催化剂。使用粉末X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、X射线光电子能谱(XPS)、紫外-可见漫反射吸收光谱(UV-Vis DRS)以及N_2吸附-脱附测试等方式对所制备样品的晶体结构、形貌、比表面积、孔分布和光吸收能力等进行详细的表征。研究表明,氮掺杂后减小了HTi_2NbO_7的禁带宽度,从而使光响应范围扩展到可见光区域;掺杂的氮原子主要位于Ti_2NbO_7-薄片的间隙位置,并与氢离子化学键合;与N掺杂的层状HTi_2NbO_7相比,N掺杂的HTi_2NbO_7纳米片具有更大的比表面积和更丰富的介孔结构,这是由于钛铌酸纳米片相对松散且不规则的排列。因此,在降解罗丹明B(RhB)溶液时,N掺杂的HTi_2NbO_7纳米片比N掺杂的层状HTi_2NbO_7具有更加优异的可见光催化活性。     

Ce掺杂Bi2MoO6/TiO2纳米纤维异质结的制备及可见光催化性能

以静电纺丝技术制备的TiO_2纳米纤维为基质,通过溶剂热法制备了异质结型稀土Ce掺杂Bi_2MoO_6/TiO_2复合纳米纤维。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)以及荧光光谱(PL)等分析测试手段对样品的物相、形貌和光学性能等进行表征。以罗丹明B为模拟有机污染物,研究了样品的可见光催化性能。结果表明:在稀土掺杂样品中,Ce离子进入Bi_2MoO_6晶格,部分取代Bi3+,导致晶胞膨胀,晶格畸变,形成缺陷;与TiO_2复合形成异质结,有利于光生电荷的产生、转移和有效分离,从而提高TiO_2纳米纤维的光催化活性。可见光照射180 min,罗丹明B的降解率达到95.1%。经5次循环光催化降解活性基本不变,样品具有良好的光催化稳定性。     

Ti4+掺杂制备花状SnO2/Sn3O4异质结微米球及其光催化性能

通过水热法制备了由层状纳米片堆叠而成的花球状Sn_3O_4及x%Ti-Sn O_2/Sn_3O_4(x%为Ti与Sn的物质的量之比)。采用X射线粉末衍射、扫描电子显微镜、透射电子显微镜、X射线光电子能谱、紫外-可见漫反射光谱、红外光谱和光电流响应等物理化学方法对合成的样品进行表征分析。结果表明,由于Ti~(4+)电负性及离子半径与Sn~(4+)相似,可以很好地进入Sn_3O_4晶格中替代Sn~(4+)形成替代掺杂,但不引起大的晶格畸变。同时,掺入Ti~(4+)后使得一部分Sn~(4+)直接与O结合生成纳米球状Sn O_2颗粒分散覆盖在Sn_3O_4表面,形成Sn O_2/Sn_3O_4异质结。光催化活性表明,x%Ti-Sn O_2/Sn_3O_4不仅具有较强的还原Cr~(6+)能力,而且拥有氧化降解有机污染物甲基橙和酸性橙Ⅱ的能力。催化活性的增强归因于x%Ti-Sn O_2/Sn_3O_4具有比较大的比表面积和更强的光吸收,同时Sn O_2/Sn_3O_4异质结的生成有效地提升了光生电子与空穴的分离效率。     

Gd-N共掺杂SrTiO3/TiO2复合纳米纤维制备及光催化性能

以静电纺丝技术制备的TiO_2纳米纤维为基质和反应物,结合一步水热法制得Gd-N共掺杂SrTiO_3/TiO_2复合纳米纤维光催化剂。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)、X射线光电子能谱(XPS)、紫外-可见漫反射(UV-Vis DRS)和荧光光谱(PL)等方法对其微观结构、形貌和光学性能进行表征。结果表明:SrTiO_3和TiO_2形成异质结能够使光生电子和空穴得到很好的分离,而Gd-N共掺杂产生新带隙,可以拓宽光谱响应范围至可见光区,并引起晶格缺陷,成为光生电子-空穴对的浅势捕获阱。Gd-N共掺杂与异质结的协同作用有效提高了SrTiO_3/TiO_2复合纳米纤维的可见光催化活性。     

TiO2/CuS异质结的制备及光催化降解染料废水的研究

以原位沉淀法和水热法混合的合成手段,制备了TiO_2/CuS异质结光催化剂。这种异质结改善了单一TiO_2半导体光催化剂的缺陷,明显提高了太阳光下光催化降解甲基橙的效率。TiO_2与CuS之间形成的异质结结构和合适的能带结构能够扩展材料对太阳光谱的响应范围并且很好地收集和传输光诱导载流子,从而提高了载流子的分离效率,最终使半导体的光催化活性明显增强。结果表明,太阳光照射25min后,相比于TiO_2/MnS、TiO_2/CdS和TiO_2/ZnS异质结,TiO_2/CuS异质结(TiO_2和CuS的摩尔比为3∶1)对甲基橙的降解效果最佳,降解效率能达到97.3%。为提高半导体的光催化活性提供了一条可行的路径。     

PVA在提高TiO2/CdSe异质结光催化活性与抗光腐蚀性能方面的应用及机理

通过阳极氧化法和电化学沉积制备了TiO_2/CdSe异质结膜,并通过旋涂结合后续热处理的方法,在TiO_2/CdSe异质结膜上制备适量脱水态的聚乙烯醇(PVA)来提高TiO_2/CdSe异质结抗光腐蚀性能。采用XRD,SEM,FTIR,UV-Vis,PL,电化学测试,光催化降解罗丹明B等方法对样品的晶体结构、微观形貌、光电化学性能、光催化性能等进行了表征,并通过测定光降解体系中Cd2+的浓度,研究了纳米复合材料的抗光腐蚀性能。结果表明,与TiO_2/CdSe相比,TiO_2/CdSe/PVA纳米复合材料不仅具有更好的可见光光催化活性,还具有良好的可见光光催化稳定性和抗光腐蚀性能。同时,PVA的存在对光催化反应中的二次污染物Cd2+也有抑制作用。     

TiO2/LaFeO3微纳米纤维的可控制备及光催化性能简

利用静电纺丝技术及水热合成法制备了TiO2/LaFeO3异质结构. 采用场发射扫描电子显微镜(FE-SEM),X射线衍射(XRD),傅里叶变换红外(FTIR)光谱和紫外-可见漫反射光谱(UV-Vis)等手段对TiO2/LaFeO3微纳米纤维的结构和表面形态进行表征. 通过亚甲基蓝(MB)光降解反应研究了其光催化性能. 结果表明,不完全碳化TiO2纤维表面的缺陷位点是LaFeO3纳米粒子的有利生长点. TiO2/LaFeO3异质结材料的带隙明显窄于TiO2,光催化活性得到提高;经140 min紫外光照射后,TiO2/LaFeO3异质结催化剂对MB的降解率为65.34%,分析和探讨了其光催化机理.     

Ce掺杂Bi2MoO6/TiO2纳米纤维异质结的制备及可见光催化性能

以静电纺丝技术制备的TiO₂纳米纤维为基质,通过溶剂热法制备了异质结型稀土Ce掺杂Bi₂MoO₆/TiO₂复合纳米纤维。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）、透射电镜（TEM）、紫外-可见漫反射光谱（UV-Vis DRS）以及荧光光谱（PL）等分析测试手段对样品的物相、形貌和光学性能等进行表征。以罗丹明B为模拟有机污染物,研究了样品的可见光催化性能。结果表明：在稀土掺杂样品中,Ce离子进入Bi₂MoO₆晶格,部分取代Bi³⁺,导致晶胞膨胀,晶格畸变,形成缺陷;与TiO₂复合形成异质结,有利于光生电荷的产生、转移和有效分离,从而提高TiO₂纳米纤维的光催化活性。可见光照射180 min,罗丹明B的降解率达到95.1%。经5次循环光催化降解活性基本不变,样品具有良好的光催化稳定性。     

Bi2MoO6/BiVO4异质结的水热合成和可见光催化活性

采用一步水热法制备Bi₂MoO₆/BiVO₄复合光催化剂. 利用X 射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等手段对其晶体结构和微观结构进行了表征. 结果表明, Bi₂MoO₆纳米粒子沉积在BiVO₄纳米片表面从而形成异质结结构. 紫外-可见漫反射光谱(UV-Vis DRS)表明所制备的Bi₂MoO₆/BiVO₄异质结较纯相Bi₂MoO₆和BiVO₄对可见光吸收更强. 由于形成异质结结构及其光吸收性能使Bi₂MoO₆/BiVO₄ 光催化活性有较大提高. 可见光下(λ>420 nm)光催化降解罗丹明B (RhB)实验结果表明,Bi₂MoO₆/BiVO₄光催化活性较纯相Bi₂MoO₆和BiVO₄高. Bi₂MoO₆/BiVO₄样品光催化性能提高的原因是Bi₂MoO₆和BiVO₄形成异质结, 从而有效抑制光生电子-空穴对的复合, 增大了可见光吸收范围及比表面积.     

Bi2WO6量子点(QDs)修饰Bi2MoO6-xF2x异质结的构筑及其催化活性增强机理

采用简单沉积-沉淀法合成了Bi_2WO_6@Bi_2MoO_(6-x)F_(2x)(BWO/BMO_(6-x)F_(2x))异质结,借助XRD、XPS、TEM、SEM、EDS、UV-Vis-DRS、PC和EIS等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征,并以模型污染物罗丹明B(Rh B)的光催化降解作为探针反应来评价Bi_2WO_6@Bi_2MoO_(6-x)F_(2x)异质结的光催化活性增强机制。形貌分析表明,所得Bi_2MoO_6微球由大量厚度为20~50 nm的纳米片组成;FE-SEM和HR-TEM分析表明,尺寸约为10 nm的Bi_2WO_6量子点均匀沉积在Bi_2MoO_(6-x)F_(2x)微球表面,形成新颖的Bi_2WO_6@Bi_2MoO_(6-x)F_(2x)异质结;与纯Bi_2MoO_6或者Bi_2WO_6相比,1∶1Bi_2WO_6@Bi_2MoO_(6-x)F_(2x)异质结表现出更好的光催化活性和光电流性质,其对RhB光催化降解的表观速率常数分别为纯BMO和BWO的6.4和11.6倍。PC和EIS图谱分析表明,Bi_2WO_6量子点表面沉积显著提高Bi_2MoO_(6-x)F_(2x)光生电子/空穴的分离效率和迁移速率;活性物种捕获实验证明了·O_2~-和h~+是主要的活性物种。根据实验结果,探讨了F-掺杂和Bi_2WO_6量子点之间的协同效应对Bi_2MoO_6的光催化活性的影响机制。     

TiO2/SnO2复合光催化剂的耦合效应

采用改进的sol gel技术制备TiO2/SnO2耦合型半导体光催化剂,利用XRD、气相色谱 仪、粒度仪和表面光电压装置等研究了耦合型半导体光催化机理和光催化效率的影响因素, 并通过降解甲醛探讨其在空气污染治理中的作用.实验结果表明,添加20 ％(mol) SnO2的复 合半导体光催化剂,其光催化效率比纯TiO2高一倍以上.据实验结果和粒子紧密堆积原理,提 出强耦合效应和弱耦合效应的光催化反应模型,并用此模型较好地解释了TiO2/SnO2复合型半 导体光催化剂的光催化效率随SnO2含量变化规律.     

CeO2改性Ag-V2O5/TiO2催化剂的甲基吡啶氧化脱甲基性能

以锐钛矿TiO_2为载体,考察了CeO_2改性对Ag-CeO_2-V_2O_5/TiO_2催化3-甲基吡啶氧化脱甲基性能的影响,并优化了催化剂组成与制备条件.结果表明:Ce掺杂改性不仅能够与V物种作用形成Ce VO_4,而且促进V_2O_5分散,改善活性组分的氧化还原性能,从而提高3-甲基吡啶脱甲基转化率与选择性,改善Ag-V_2O_5/TiO_2催化性能.适宜的催化剂组成为V_2O_5负载量15%,Ce/V的摩尔比0.33,Ag质量分数1.0%.过高的焙烧温度将导致TiO_2载体向金红石型转变,Ag-CeO_2-V_2O_5/TiO_2适宜制备条件为450℃焙烧4 h.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Cr2(WO4)3和Cr2(MoO4)3的负热膨胀特性研究

用液相反应-前驱物烧结法制备了Cr₂(WO₄)₃和Cr₂(MoO₄)₃粉体。298～1 073 K的原位粉末X射线衍射数据表明Cr₂(WO₄)₃和Cr₂(MoO₄)₃的晶胞体积随温度的升高而增大, 本征线热膨胀系数分别为(1.274±0.003)×10^-6 K^-1和(1.612±0.003)×10^-6 K^-1。用热膨胀仪研究了Cr₂(WO₄)₃和Cr₂(MoO₄)₃在静态空气中298～1 073 K范围内热膨胀行为，即开始表现为正热膨胀，随后在相转变点达到最大值，最后表现为负热膨胀，其负热膨胀系数分别为(-7.033±0.014)×10^-6 K^-1和(-9.282±0.019)×10^-6 K^-1。     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

EuZn2Si2 and EuZn2Ge2 Grown from Zn or Ga(ln)/Zn Flux

Single crystals of the novel ternary compounds EuZn₂Si₂ and EuZn₂Ge₂ were grown from pure gallium, indium, or zinc metal used as a flux solvent. Crystal properties were characterized using X-ray single-crystal analyses via Gandolfi and Weissenberg film techniques and by four-circle X-ray single-crystal diffractometry. The new compounds crystallize with ternary derivative structures of BaAl₄, i.e., EuZn₂Si₂ with ThCr₂Si₂-type (a=0.42607(2) nm, c=1.03956(5) nm, I4/mmm, R₁=0.038) and EuZn₂Ge₂ with CaBe₂Ge₂-type (a=0.43095(2) nm, c=1.07926(6) nm, P4/nmm, R₁=0.067). XAS and magnetic measurements on EuZn₂Si₂ and EuZn₂Ge₂ revealed in both compounds the presence of Eu²⁺ ions carrying large magnetic moments, which order magnetically at low temperatures. The magnetic phase transition occurs at T_N=16 and 7.5 K for the silicide and the germanide, respectively. In EuZn₂Si₂ there occurs a spin reorientation at 13 K and furthermore some canting of antiferromagnetically ordered moments below about 10 K. In EuZn₂Ge₂ a canted antiferromagnetic structure is formed just at T_N.     

Mn-Na2WO4/SiO2催化剂表面活性中心结构的DFT研究

Mn Na2WO4/SiO2 is one of the best catalysts for oxidative coupling of methane.To investigate the nature of active centers and the reaction mechanism,the structure of possible metal sites formed by tungsten and manganese over the silica surface were studied using molecular simulation method and ab initio DFT calculations.Silica support exists in the catalyst as 岐瞔ristobalite and its (111) face exposes preferentially to the surface.The calculated results show that tungsten interacts with the silica surface by three or one bridge oxygen atoms to form tetrahedral [WO4],and manganese interacts with single bridge oxygen to form dispersed [MnO4] or exists as oxide clusters.The nature of the molecular orbitals and the electronic structure suggest that the tetrahedral [WO4] site with single bridge oxygen is the most probable active center responsible for methane activation.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

g-C3N4/Bi2O2CO32D纳米片复合材料的制备及可见光催化性能研究

采用自组装和化学沉淀法分别制得两种可见光驱动复合材料石墨相氮化碳/碳酸氧铋(g-C_3N_4/Bi_2O_2CO_3).采用X射线衍射光谱(XRD),紫外可见光谱、扫描电镜(SEM)、N_2吸附、电化学阻抗谱(EIS)和X射线光电子能谱(XPS)等分析手段对制备的催化剂进行了表征.结果表明,制备方法对纳米复合材料的晶相、形态及光学性能没有影响,但是影响g-C_3N_4和Bi_2O_2CO_3之间的相互作用力,导致光生电子-空穴对的分离速率存在显著差异.以可见光驱动苯酚和罗丹明B的降解实验为探针反应检测催化剂的光催化性能.实验结果表明自组装法得到的异质结催化剂中相互作用力更强,催化效果最高.O_2-是罗丹明B降解反应的主要活性物种,染料的光敏化、Bi_2O_2CO_3与g-C_3N_4综合效应,导致光生载流子电荷分离效率更高.