Reconfigurable Photonic Capsules Containing Cholesteric Liquid Crystals with Planar Alignment

Cholesteric liquid crystals (CLCs) reflect selected wavelengths of light owing to their periodic helical structures. The encapsulation of CLCs leads to photonic devices that can be easily processed and might be used as stand‐alone microsensors. However, when CLCs are enclosed by polymeric membranes, they usually lose their planar alignment, leading to a deterioration of the optical performance. A microfluidics approach was employed to integrate an ultrathin alignment layer into microcapsules to separate the CLC core and the elastomeric solid membrane using triple‐emulsion drops as the templates. The thinness of the alignment layer provides high lubrication resistance, preserving the layer integrity during elastic deformation of the membrane. The CLCs in the microcapsules can thus maintain their planar alignment, rendering the shape and optical properties highly reconfigurable.     

Solvent induced enhancement of nonlinear optical response of graphdiyne

Flat and crystalline materials with exceptional nonlinear optical(NLO) properties are highly desirable for their potential applications in integrated NLO photonic devices.Graphdiyne(GD),a new twodimensional(2 D) carbon allotrope,has recently evoked burgeoning research attention by virtue of its tunable bandgap along with a high carrier mobility and extended π-conjugation compared with most conventional optical materials.Here,we experimentally probe the third-order nonlinear optical response of GD dispersed in several common solvents(alcohols) using a femtosecond Z-scan technique.The measured nonlinear optical refractive index is in the order of ~10^-8 cm²/W,which is approximately one order of magnitude higher than that of most 2 D materials.In particular,we find that different NLO responses can be observed from GD when dispersed in different solvents,with the strongest NLO response when dispersed in 1-propanol.It is proposed that some intrinsic properties of the solvents,such as the polarity and viscosity,could influence the NLO response of GD materials.Our experimental results confirm the assumptions on the NLO behavior in GD and demonstrate its great potential for future generations of Kerr-effect-based NLO materials and devices.     

Dye-integrated cholesteric photonic luminescent solar concentrator

We have developed organic dye-integrated thin-film liquid crystalline photonic luminescent solar concentrators (LSCs), where the chirality of the liquid crystal (LC) results in the formation of a one-dimensional photonic cavity. By varying the different LSC parameters, including dye concentration, spectral position of the photonic band-gap and the LC phase, and by using spectroscopic and electrical characterisation, we have systematically studied the effects of self-absorption, incident absorption and confinement of down-converted emission on optical efficiency. Our results demonstrate that the efficiency of our LSCs is significantly enhanced in the LC phase when the photonic band-gap is at long wavelengths (>600 nm), overcoming associated low incident absorption and higher self-absorption. We reach the significant conclusion that focusing on improving the confinement of dye-emitted photons, rather than on increasing incident absorption, is a more promising route to enhancing thin-film LC-based LSC performance.     

Rational self-assembly of polygonal organic microcrystals for shape-dependent multi-directional 2D optical waveguides

Micro-nano-level photonic waveguide regulation is essential for future on-chip photonic integrated systems and is still of great challenges. We report a molecular design strategy, changing the position of the methyl substituent makes the arrangement of the three isomer molecules different in their respective crystals. Based on this strategy, three sheet-like crystals with different polygonal morphologies were prepared via solution self-assembly approach. The in-depth optical measurements demonst...     

Optical waveguides at micro/nanoscale based on functional small organic molecules

Optical waveguides synthesized at the micro/nanoscale have drawn great interest for their potential applications in high speed miniaturized photonic integrations. In this Perspective article, we mainly focus on the related works on active optical waveguides based on functional small organic molecules in micro/nano regime. We begin with a general overview of recent progress in sub-wavelength optical waveguides, including the development of waveguide materials of inorganic semiconductors, polymers, and small organic molecules. Then brief highlights are put on the recently reported organic optical waveguides with various unique optical properties induced by the ordered molecular aggregations in the micro/nano-sized solid-state structures, such as polarized emission, lasing, aggregation-induced enhanced emission, etc. This article concludes with a summary and our personal view about the direction of future development in organic opto-functional waveguides as photonic devices.     

Polymers for Electro‐Optical Modulation

Second‐order nonlinear optical (NLO) properties of polymeric materials have been attracting a lot of attention, especially for such potential applications as fast waveguides electrooptic (EO) modulation and frequency‐doubling devices. For these photonic applications, the performance of the NLO materials has to be optimized. This requires not only a fundamental knowledge of inter‐relationship between their chemical and NLO properties, but new technologies competitive or superior to existing ones as well. This review focuses on the synthesis of NLO polymers including chromophore design, and the comparison among comprehensive EO polymer systems. Moreover, characterization and device fabrication of electro‐optical polymer planar waveguides are also reported in this review.     

Metal-organic frameworks with a three-dimensional ordered macroporous structure: dynamic photonic materials

Tuning MOFs: When a metal-organic framework (MOF) with an ordered three-dimensional macroporous structure is integrated into a film, the resulting materials have an additional optical element, which can be used as a general and effective signal transducer. This, in combination with the hierarchical pore structure, makes these films interesting dynamic photonic materials with potential applications in sensors.     

两种含偶氮苯共轭桥新型生色团分子的合成及性能

通过重氮化偶合反应和羟醛缩合反应合成了以偶氮苯为共轭桥、以2,2,3-三甲基-4-氰基-5-二氰基亚甲基-2,5-二氢呋喃为电子受体, 而给体分别为二甲氨基和二乙氨基的两种有机非线性光学生色团分子MFNC和EFNC. 利用IR、1H NMR和元素分析对分子的结构进行了表征. TGA和DSC测试发现, MFNC的热稳定性略好于EFNC, 其热分解温度最高达266 ℃. 通过测定两种材料在氯仿、丙酮和DMSO中的紫外-可见光谱, 用溶致变色法计算得到两种材料在激光波长为1064 nm处的二阶非线性品质系数μgβ, 对比发现EFNC的μgβ值高于MFNC, 其值达59706×10-48 esu(1 esu=3.34×10-10C).     

Two-dimensional materials toward Terahertz optoelectronic device applications

Two-dimensional (2D) materials have become a worldwide hot topic due to their fascinating properties, including high carrier mobility, tunable bandgap, ultra-broadband optical absorption and response. The versatility of 2D materials enable it hold great potential to achieve high performance Terahertz (THz) optoelectronic devices. However, the THz radiation, range from infrared to microwave, known as the THz gap, much less investigated than that of other electromagnetic wave. Motivated by this lack of knowledge, we reviewed the recent advances of research into 2D materials based THz optoelectronic devices. Firstly, we introduced the background and motivation of this review. Then, the suitable 2D material candidates are exhibited, followed by a comprehensive review of their applications in THz generation devices, modulator, THz shielding, and photodetectors. Finally, the challenges and further development directions are concluded. We believe that some milestone investigations of 2D materials based THz optoelectronic devices will emerge soon, which will bring about great industrial revelations in 2D materials-based nanodevice commercialization.     

三维光子晶体的制备

三维光子晶体作为一种光子带隙材料在光学器件、化学生物传感以及信息传输和存储等方面具有广泛的潜在应用价值。自1987年三维光子晶体的概念被提出以来,科学家们一直致力于在实验室用不同的手段合成不同材料和不同结构的光子晶体。本文综述了近年来出现的一些三维光子晶体制备方法,大致分为3类：“自上而下法”（top-down method）、“自下而上法”（bottom-up method）和模板辅助法（template-assisted method）,并详细阐述了每种方法的代表性工作、适用范围以及各自的优缺点。     

Recent advances in spherical photonic crystals: Generation and applications in optics

Spherical photonic crystals (PCs), generated by assembly of monodisperse colloidal nanospheres in a spherical confined geometry, attract great attention recently owing to their potential applications in the fields of displays, sensors, optoelectronic devices, and others. Compared to their conventional film or bulk counterparts, the optical stop band of the spherical PCs is independent of the rotation under illumination of the surface of a fixed incident angle of the light, broadening their applications. In this paper, we will review recent advances in the field of spherical PCs including design, preparation and potential applications. Various preparation strategies for spherical PCs, including solvent-evaporation induced crystallization method, microfluidic-assisted approach, and others are outlined. Their applications based on the unique optical properties (such as photonic band gaps and structural colors) for sensing and displaying are then presented, followed by the perspective of this emerging field.     

Fabrication of 3D polymeric photonic arrays and related applications

This review article describes the state-of-art methodologies, mainly self-assembly routes, which are in practice to fabricate photonic crystals (PCs) for advanced applications. The self-assembly of colloidal building blocks is an effective, affordable, and tunable approach to fabricate varieties of photonic materials of desired shapes and surface areas. Because of easy fabrication and controlled performance factors, PCs emerged as a potential platform for designing and developing optical devices with desired features such as photonic bandgap, high reflectance/transmittance, low loss, and lasing in the visible range of wavelengths. To develop next-generation optoelectronics and optical system, significant efforts are being made to explore novel and cost-effective fabrication methods to design and develop 3D-PCs platform, which is covered in this mini-review. The challenges, potential alternatives, and prospects of self-assembled 3D PCs are also discussed in this review.     

Bio-inspired variable structural color materials

Natural structural color materials, especially those that can undergo reversible changes, are attracting increasing interest in a wide variety of research fields. Inspired by the natural creatures, many elaborately nanostructured photonic materials with variable structural colors were developed. These materials have found important applications in switches, display devices, sensors, and so on. In this critical review, we will provide up-to-date research concerning the natural and bio-inspired photonic materials with variable structural colors. After introducing the variable structural colors in natural creatures, we will focus on the studies of artificial variable structural color photonic materials, including their bio-inspired designs, fabrications and applications. The prospects for the future development of these fantastic variable structural color materials will also be presented. We believe this review will promote the communications among biology, bionics, chemistry, optical physics, and material science (196 references).     

Liquid-crystal-droplet optical microcavities

ABSTRACT

The use of liquid-crystal droplets as optical microcavities and lasers is reviewed and possible applications are discussed. Liquid-crystal droplets are prepared by simple methods that enable scalable production since their internal structure is formed by self-assembly. Light is trapped in droplets due to total internal reflection on the surface due to refractive index mismatch or because of a photonic bandgap structure in cholesteric liquid crystals (CLCs). Light confinement gives rise to a variety of optical modes and by employing a fluorescent dye end external optical pumping, lasing can be achieved. Liquid-crystal-droplet cavities are largely tunable by applying an electric field or a temperature change. Such cavities can be used as temperature and chemical sensors, and tunable light sources and filters in future integrated soft photonic circuits.     

Engineering Donor–Acceptor Heterostructure Metal–Organic Framework Crystals for Photonic Logic Computation

Photonic materials use photons as information carriers and offer the potential for unprecedented applications in optical and optoelectronic devices. In this study, we introduce a new strategy for photonic materials using metal–organic frameworks (MOFs) as the host for the rational construction of donor–acceptor (D–A) heterostructure crystals. We have engineered a rich library of heterostructure crystals using the MOF NKU‐111 as a host. NKU‐111 is based upon an electron‐deficient tridentate ligand (acceptor) that can bind to various electron‐rich guests (donors). The resulting heterocrystals exhibit spatially segregated multi‐color emission resulting from the guest‐dependent charge‐transfer (CT) emission. Spatially effective mono‐directional energy transfer results from tuning the energy gradient between adjacent domains through the selection of donor guest molecules, which suggests potential applications in integrated optical circuit devices, for example, photonic diodes, on‐chip signal processing, optical logic gates.     

Harnessing Light with Photonic Nanowires: Fundamentals and Applications to Quantum Optics

The efficient feeding of spontaneous emission (SE) into a controlled optical mode lies at the heart of a new generation of advanced optoelectronic devices, such as low‐threshold microlasers and bright sources of quantum light. In the solid state, single‐mode emission was first demonstrated by using the Purcell effect that arises in a resonant microcavity. Recently, the need to relax the constraints inherent to such a narrow‐band approach has motivated large effort to develop structures ensuring broadband and efficient SE control. This minireview deals with fiber‐like photonic nanowires, a class of high‐index waveguides that features key assets in this context. Combining theoretical predictions and experimental results, the paper details the SE dynamics in such tiny wires. In addition, it shows how the far‐field emission of a single wire can be tailored through proper engineering of the two wire ends. As an application in the field of quantum optics, we review the realization of an ultrabright single‐photon source. This first device was based on a self‐assembled quantum dot embedded in a wire antenna realized with a top‐down fabrication process. Considering recent advances in the direct growth of tapered photonic wires, we also propose a bottom‐up fabrication route to realize a complete device. In particular, this proposal ensures the optimal 3D positioning of a single emitter inside the antenna. Finally, future research and application prospects are also reviewed.     

Photonic crystals--a step towards integrated circuits for photonics.

The field of photonic crystals has, over the past few years, received dramatically increased attention. Photonic crystals are artificially engineered structures that exhibit a periodic variation in one, two, or three dimensions of the dielectric constant, with a period of the order of the pertinent light wavelength. Such structures in three dimensions should exhibit properties similar to solid-state electronic crystals, such as bandgaps, in other words wavelength regions where light cannot propagate in any direction. By introducing defects into the periodic arrangement, the photonic crystals exhibit properties analogous to those of solid-state crystals. The basic feature of a photonic bandgap was indeed experimentally demonstrated in the beginning of the 1990s, and sparked a large interest in, and in many ways revitalized, photonics research. There are several reasons for this attention. One is that photonic crystals, in their own right, offer a proliferation of challenging research tasks, involving a multitude of disciplines, such as electromagnetic theory, nanofabrication, semi-conductor technology, materials science, biotechnology, to name a few. Another reason is given by the somewhat more down-to-earth expectations that photonics crystals will create unique opportunities for novel devices and applications, and contribute to solving some of the issues that have plagued photonics such as large physical sizes, comparatively low functionality, and high costs. Herein, we will treat some basics of photonic crystal structures and discuss the state-of-the-art in fabrication as well give some examples of devices with unique properties, due to the use of photonic crystals. We will also point out some of the problems that still remain to be solved, and give a view on where photonic crystals currently stand.     

Functional Materials from Cellulose‐Derived Liquid‐Crystal Templates

Cellulose nanocrystals (CNCs), known for more than 50 years, have attracted attention because of their unique properties such as high specific strength and modulus, high surface area, and fascinating optical properties. Just recently, however, their potential in supramolecular templating was identified by making use of their self‐assembly behavior in aqueous dispersions in the presence of compatible precursors. The combination of the mesoporosity, photonic properties, and chiral nematic order of the materials, which are available as freestanding films, has led to a significant number of interesting and promising discoveries towards new functional materials. This Review summarizes the use of cellulose derivatives, especially CNCs, as novel templates and gives an overview of the recent developments toward new functional materials.     

Electroluminochromic Materials and Devices Based on Metal Complexes

Electroluminochromism (ELC) refers to an interesting phenomenon exhibited by a material whose luminescent properties can be reversibly modulated under an electrical stimulus. Such a luminescence‐switching property has been widely used in various organic optoelectronic devices because it can simultaneously detect electrical and optical signals. Metal complexes are the promising candidates for ELC materials due to their sensitivity to an electrical stimulus. Herein, recent progress on electroluminochromic materials and devices based on various metal complexes has been summarized. Meanwhile, the applications of these complexes in data recording and security protection have also been discussed. Finally, a brief conclusion and outlook are presented, pointing out that the development of electroluminochromic metal complexes with excellent performance is important because they play a vital role in future intelligent optoelectronic devices.     

Recent progress in chiral photonic band‐gap liquid crystals for laser applications

This article describes a brief review of recent research advances in chiral liquid crystals (CLCs) for laser applications. The CLC molecules have an intrinsic capability to spontaneously organize supramolecular helical assemblages consisting of liquid crystalline layers through their helical twisting power. Such CLC supramolecular helical structures can be regarded as one‐dimensional photonic crystals (PhCs). Owing to their supramolecular helical structures, the CLCs show negative birefringence along the helical axis. Selective reflection of circularly polarized light is the most unique and important optical property in order to generate internal distributed feedback effect for optically‐excited laser emission. When a fluorescent dye is embedded in the CLC medium, optical excitation gives rise to stimulated laser emission peak(s) at the band edge(s) and/or within the CLC selective reflection. Furthermore, the optically‐excited laser emission peaks can be controlled by external stimuli through the self‐organization of CLC molecules. This review introduces the research background of CLCs carried out on the PhC realm, and highlights intriguing precedents of various CLC materials for laser applications. It would be greatly advantageous to fabricate active CLC laser devices by controlling the supramolecular helical structures. Taking account of the peculiar features, we can envisage that a wide variety of supramolecular helical structures of CLC materials will play leading roles in next‐generation optoelectronic molecular devices. © 2010 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.201000013