First-principle study of Mg adsorption on Si（111） surfaces

We have carried out first-principle calculations of Mg adsorption on Si(111) surfaces. Different adsorption sites and coverage effects have been considered. We found that the threefold hollow adsorption is energy-favoured in each coverage considered, while for the clean Si(111) surface of metallic feature, we found that 0.25 and 0.5 ML Mg adsorption leads to a semiconducting surface. The results for the electronic behaviour suggest a polarized covalent bonding between the Mg adatom and Si(111) surface.     

Comparative study of adsorption characteristics of Cs on the GaN （0001） and GaN （0001） surfaces

The adsorption characteristics of Cs on GaN （0001） and GaN （0001） surfaces with a coverage from 1/4 to 1 monolayer have been investigated using the density functional theory with a plane-wave uttrasoft pseudopotential method based on first-principles calculations. The results show that the most stable position of the Cs adatom on the GaN （0001） surface is at the N-bridge site for 1/4 monolayer coverage. As the coverage of Cs atoms at the N-bridge site is increased, the adsorption energy reduces. As the Cs atoms achieve saturation, the adsorption is no longer stable when the coverage is 3/4 monolayer. The work function achieves its minimum value when the Cs adatom coverage is 2/4 monolayer, and then rises with Cs atomic coverage. The most stable position of Cs adatoms on the GaN （000i） surface is at H3 site for 1/4 monolayer coverage. As the Cs atomic coverage at H3 site is increased, the adsorption energy reduces, and the adsorption is still stable when the Cs adatom coverage is 1 monolayer. The work function reduces persistently, and does not rise with the increase of Cs coverage.     

Comparative study of adsorption characteristics of Cs on the GaN(0001) and GaN(000) surfaces

The adsorption characteristics of Cs on GaN(0001) and GaN(000) surfaces with a coverage from 1/4 to 1 monolayer have been investigated using the density functional theory with a plane-wave ultrasoft pseudopotential method based on first-principles calculations.The results show that the most stable position of the Cs adatom on the GaN(0001) surface is at the N-bridge site for 1/4 monolayer coverage.As the coverage of Cs atoms at the N-bridge site is increased,the adsorption energy reduces.As the Cs atoms achieve saturation,the adsorption is no longer stable when the coverage is 3/4 monolayer.The work function achieves its minimum value when the Cs adatom coverage is 2/4 monolayer,and then rises with Cs atomic coverage.The most stable position of Cs adatoms on the GaN(000) surface is at H3 site for 1/4 monolayer coverage.As the Cs atomic coverage at H3 site is increased,the adsorption energy reduces,and the adsorption is still stable when the Cs adatom coverage is 1 monolayer.The work function reduces persistently,and does not rise with the increase of Cs coverage.     

Effects of O defects on adsorption of small Ag clusterson a MgO(001) surface

The interaction of Ag atoms with a defective MgO(001) surface is systematically studied based on density functional theory. The Ag clusters are deposited on neutral and charged oxygen vacancies of the MgO(001) surface. The structures of Ag clusters take the shape of simple models of two- or three-dimensional (2D and 3D) metal particles deposited on the MgO surface. When the nucleation of the metal clusters occurs in the F_s (missing neutral O) centre, the interaction with the substrate is considerably stronger than that in the F_s⁺ (missing O^- ) centre. The results show that the adsorption of Ag atoms on the MgO surface with oxygen vacancy is stronger than on a clear MgO surface, thereby attracting more Ag atoms to cluster together, and forming atomic islands.     

Structural and electronic properties of atomic oxygen adsorption on Cu(111) surface:A first-principles investigation

By using the first-principles calculations,we have systematically investigated the adsorption of atomic oxygen on Cu(111) surface for a wide range of coverages Θ(from 0.11 to 1.00 ML) and adsorption sites.We found that the fcc-hollow site is the most stable site for oxygen adsorption.The adsorption energy decreases with increasing oxygen coverage due to the increasing repulsive interaction in the overlayer O adatoms.Except for coverage of 1.00 ML,the oxygen-induced lateral relaxations and bucklings are found in the outermost three Cu layers,and the hillock-like as well as ridge-like bucklings are also found for Θ=0.25 ML and Θ=0.75 ML as well as Θ=0.50 ML,respectively.With an increasing oxygen coverage,the work function increases and the surface dipole moment decreases.Electron transfer from the first layer Cu atoms to O adatoms indicates the O-Cu bond having some degree of ionic character,while the hybridization between O 2p and Cu 3d orbitals implies that it also has some degree of covalence character.Moreover,with the increasing oxygen coverage,more Cu 3d and O 2p states are empty thus weakening the binding of O/Cu(111) system,but increase in the PDOS at the Fermi level.This implies an enhancement in the metallic character of the O/Cu(111) system.     

Electronic structures and coronene on Ru（0001）： vibrational properties of first-principles study

We calculate the configurations,electronic structures,vibrational properties at the coronene/Ru(0001) interface,and adsorption of a single Pt atom on coronene/Ru(0001) based on density functional theory calculations.The geometric structures and electronic structures of the coronene on Ru(0001) are compared with those of the graphene/Ru(0001).The results show that the coronene/Ru(0001) can be a simplified model system used to describe the interaction between graphene and ruthenium.Further calculations of the vibrational properties of coronene molecule adsorbed on Ru(0001) suggest that the phonon properties of differently corrugated regions of graphene on Ru(0001) are different.This model system is also used to investigate the selective adsorption of Pt atoms on graphene/Ru(0001).The configurations of Pt on coronene/Ru(0001) with the lowest binding energy give clues to explain the experimental observation that a Pt cluster selectively adsorbs on the second highest regions of graphene/Ru(0001).This work provides a simple model for understanding the adsorption properties and vibrational properties of graphene on Ru(0001) substrate.     

Ar adsorptions on Al （111） and Ir （111） surfaces： a first-principles study

We investigate the adsorptions of Ar on Al (111) and Ir (111) surfaces at the four high symmetry sites,i.e.,top,bridge,fcc-and hcp-hollow sites at the coverage of 0.25 monolayer (ML) using the density functional theory within the generalized gradient approximation of Perdew,Burke and Ernzerhof functions.The geometric structures,the binding energies,the electronic properties of argon atoms adsorbed on Al (111) and Ir (111) surfaces,the difference in electron density between on the Al (111) surface and on the Ir (111) surface and the total density of states are calculated.Our studies indicate that the most stable adsorption site of Ar on the Al (111) surface is found to be the fcc-hollow site for the (2 × 2) structure.The corresponding binding energy of an argon atom at this site is 0.538 eV/Ar atom at a coverage of 0.25 ML.For the Ar adsorption on Ir (111) surface at the same coverage,the most favourable site is the hcp-hollow site,with a corresponding binding energy of 0.493 eV.The total density of states (TDOS) is analysed for Ar adsorption on Al (111) surface and it is concluded that the adsorption behaviour is dominated by the interaction between 3s,3p orbits of Ar atom and the 3p orbit of the base Al metal and the formation of sp hybrid orbital.For Ar adsorption on Ir (111) surface,the conclusion is that the main interaction in the process of Ar adsorption on Ir (111) surface comes from the 3s and 3p orbits of argon atom and 5d orbit of Ir atom.     

Passivation effects of phosphorus on 4H-SiC(0001) Si dangling bonds: A first-principles study

The effect of phosphorus passivation on 4H-SiC(0001) silicon(Si) dangling bonds is investigated using ab initio atomistic thermodynamic calculations. Phosphorus passivation commences with chemisorption of phosphorus atoms at high-symmetry coordinated sites. To determine the most stable structure during the passivation process of phosphorus, a surface phase diagram of phosphorus adsorption on SiC(0001) surface is constructed over a coverage range of 1/9–1 monolayer(ML). The calculated results indicate that the 1/3 ML configuration is most energetically favorable in a reasonable environment. At this coverage, the total electron density of states demonstrates that phosphorus may effectively reduce the interface state density near the conduction band by removing 4H-SiC(0001) Si dangling bonds. It provides an atomic level insight into how phosphorus is able to reduce the near interface traps.     

Chemisorption of Fe on Au-passivated Si（001） surface

The chemisorption of one monolayer of Fe atoms on a Au-passivated Si(001) surface is studied by using the self-consistent tight-binding linear muffin-tin orbital method. The Fe adatom chemisorption on an ideal Si(001) surface is also considered for comparison. The chemisorption energy and layer projected density of states for a monolayer of Fe atoms on Au-passivated Si(001) surface are calculated and compared with that of the Fe atoms on an ideal Si(001) surface. The charge transfer is investigated. It is found that the most stable position is at the fourfold hollow site for the adsorbed Fe atoms, which might sit below the Au surface. Therefore there will be a Au－Fe mixed layer at the Fe/Au－Si(100) interface. It is found that the adsorbed Fe atoms cannot sit below the Si surface, indicating that a buffer layer of Au atoms may hinder the intermixing of Fe atoms and Si atoms at the Fe/Au－Si(001) interface effectively, which is in agreement with the experimental results.     

Structural Stabilities of Ordered Arrays of Nb4 Clusters on NaCI（IO0） Surface

Adsorption of ordered （2 × 2） arrays of Nb4 clusters on the insulating surface of NaCI（100） is studied by the first-principles calculations within the density functional theory. The calculations on the relaxed geometries and cohesive energies show that both the tetrahedron and quadrangle-Nb4 can be stably adsorbed on this substrate, which may have important applications. The adsorption of quadrangle-Nb4 on the NaCl（100） surface is more stable than that of tetrahedron-Nb4. Both the Nb4 clusters studied and a single Nb atom prefer the top site of the Cl atom in the NaCl（100） surface. Electronic structure analysis suggests that the interactions between the Nb4 clusters and the substrate are weak.     

H2O在SrTiO3-(001)TiO2表面上吸附和解离的密度泛函理论研究

利用密度泛函理论研究了0.25单层(ML),0.5ML,0.75ML和1ML吸附率下H2O在SrTiO3-(001)TiO2表面上的吸附行为.比较了不同吸附率下分子吸附和解离吸附的稳定性,利用微动弹性带(nudged elastic band)方法计算了H2O的解离势垒.结果表明:在低吸附率(0.25ML和0.5ML)时,H2O表现为解离吸附;在0.75ML吸附率下,分子吸附和解离吸附同时存在;而在全吸附(吸附率为1ML)时,分子吸附更稳定.基于对H2O分子与表面之间以及H2O分子之间的电荷转移和相互作用的分析,讨论了吸附率对H2O吸附和解离的影响.     

Density functional calculations for Ni adsorption on Al(1 1 0)

The adsorption of 0.25, 0.5 and 1 monolayer (ML) of the transition metal Ni on the metal substrate Al(1 1 0) was studied using first-principles calculations at the level of density functional theory. The metal–metal system was analyzed with the generalized gradient approximation. Four stable atomic configurations were considered, and the optimized geometries and adsorption energies of different Ni adsorption sites on the Al(1 1 0) surface at selected levels of coverage were calculated and compared. The four-fold hollow site was determined to be the most stable adsorption site with adsorption energy of 5.101 eV at 0.25 ML, 3.874 eV at 0.5 ML and 3.665 eV at 1 ML. The adsorption energies of the four sites slightly decreased as the Ni coverage increased. Work function analysis showed that when Ni is adsorbed on the Al(1 1 0) surface, the work function decreased as the coverage increased due to depolarization. The Mulliken population and density of states were calculated to determine the charge distribution of the adsorption site, confirming that a chemisorption interaction exists between the adsorbed Ni atom and Al(1 1 0) surface atoms.     

H2O在SrTiO3-(001)TiO2表面上吸附和解离的密度泛函理论研究

利用密度泛函理论研究了0.25单层（ML）,0.5ML,0.75ML和1ML吸附率下H₂O在SrTiO₃-（001）TiO₂表面上的吸附行为.比较了不同吸附率下分子吸附和解离吸附的稳定性,利用微动弹性带（nudged elastic band）方法计算了H₂O的解离势垒.结果表明：在低吸附率（0.25ML和0.5ML）时,H₂O表现为解离吸附;在0.75ML吸附率下,分子吸附和解离吸附同时存在;而在全吸附（吸附率为1ML）时,分子吸附更稳定.基于对H₂O分子与表面之间以及H₂O分子之间的电荷转移和相互作用的分析,讨论了吸附率对H₂O吸附和解离的影响. 关键词： 2O')" href="#">H₂O 吸附 3-（001）TiO₂表面')" href="#">SrTiO₃-（001）TiO₂表面 密度泛函理论     

Tunneling spectra of submicron Bi<Subscript>2</Subscript>Sr<Subscript>2</Subscript>CaCu<Subscript>2</Subscript>O<Subscript>8+</Subscript><Subscript>δ</Subscript> intrinsic Josephson junctions: evolution from superconducting gap to pseudogap

The electronic, structural, and magnetic properties of Ru and Rh thin films on Ag(001) substrate are investigated by means of density functional calculations. The generalized gradient approximation is used to treat the exchange correlation potential. Alloying, burying, and fully relaxing effects are considered for different degrees of coverage: 0.25, 0.50, 1 and 2 ML. Alloying and burying effects reduce the magnetic moments while fully relaxing effects enlarge them. For Ru, the magnetic moment is high for 0.25 ML and vanishes for 2 ML; however, for Rh, the magnetic moment remains high even for 2 ML. Nevertheless, when cluster formation is analysed we conclude that the absence of magnetism in a number of previous experimental works could be attributed to the formation of big size clusters.     

氧在Nb(110)表面吸附的第一性原理研究

通过第一性原理赝势平面波方法研究了氧在Nb(110)表面的吸附性质随覆盖度变化规律. O在Nb(110)表面最稳定吸附位是洞位,次稳定吸附位是长桥位. 在长桥位吸附时, O诱导Nb(110)表面功函数随覆盖度的增加而几乎线性增加;但当O在洞位吸附时, 与干净Nb表面相比, 覆盖度为0.75 ML和1.0 ML时功函数增加, 而覆盖度为0.25 ML和0.5 ML时功函数减小.通过对面平均电荷密度分布和偶极矩变化的讨论, 解释了由吸附导致功函数复杂变化的原因.通过对表面原子结构和态密度分析, 讨论了O在Nb表面吸附时引起表面原子结构变化以及O和Nb(110)表面原子的相互作用.     

Interaction of oxygen with the Pt(1 1 1) surface in wide conditions range. A DFT-based thermodynamical simulation

We present the results of ab initio calculations of oxygen atomic adsorption in a wide range of coverage on Pt(1 1 1). At θ = 0.25 ML, the O adsorption at fcc hollow site is clearly favoured over the hcp site. At θ = 0.5 ML, the O adsorption energy decreases but the same site is favoured. When experimental or theoretical previously reported data are available, the calculated adsorption energies and site preferences are in good agreement. Among the various configurations and coverages investigated in the present work, no adsorption is stable beyond θ = 0.5 ML, except by occupation of a subsurface tetrahedral site. In that case, a total O coverage of 0.75 ML could be achieved, which is only slightly less stable than the θ = 0.5 ML configuration.

The use of thermodynamics permitted to explore the temperature–pressure stability domain corresponding to 0.25 ML, 0.5 ML and 0.75 ML. From this, we conclude that subsurface O species could be stable at temperatures lower than 700 K, with O₂ pressures of 1 bar or less.     

Atomic and electronic structures of Ag/Si(100)-c(6 × 2) surface: A first-principles study

Using the experimental data obtained mainly with the scanning tunneling microscopy observations, density functional theory calculations have been applied to examine an atomic structure of the Ag/Si(100)-c(6 × 2) reconstruction. A set of structural models has been proposed having a similar Si(100) substrate reconstruction which incorporates rows of top Si atom dimers and troughs in between the rows. Stability of about twenty models with various Ag coverage ranging from 1/6 to 1 ML has been tested, that allows reducing the number of plausible models to four. Two of these four models have been attributed to the “regular” intrinsic Ag/Si(100)-c(6 × 2) reconstruction, while the other two to its defect-induced modification. The latter is observed in the local areas near defects and domain boundaries and exhibits 3 × 2 periodicity. Comparing the results of calculations with the experimental STM images, it has been concluded that while the Si(100) substrate reconstruction is solid, the Ag subsystem is flexible due to the presence of the lightly bonded mobile Ag atoms.     

Submonolayer adsorption of Na onto the Cu(110) surface: Structure and vibrational properties

The submonolayer adsorption of Na onto the Cu(110) surface is studied. At small Na coverages (Θ = 0.16–0.25 ML), the substrate surface subjected to missing-row reconstruction (1 × 2) is shown to be most stable dynamically. When the coverage increases to Θ = 0.5 ML, the unreconstructed substrate surface with a c(2 × 2) sodium adlayer becomes dynamically stable. For an analysis, we used data on the equilibrium atomic configuration, the adsorption energy, the phonon spectra, the local density of phonon states, and the polarization of localized vibrational modes. All calculations were performed using the interatomic potentials obtained in terms of the embedded-atom method. The calculated frequencies of localized vibrational modes agree well with the existing experimental data.