Poly(3-octylthiophene) and polystyrene blends thermally treated as coatings for corrosion protection of stainless steel 304

The effect of thermal annealing of poly(3-octylthiophene) (P3OT) and polystyrene (PS) blend coatings on the corrosion inhibition of stainless steel in a 0.5 M NaCl solution was investigated. P3OT was synthesized by direct oxidation of the 3-octylthiophene monomer with ferric chloride (FeCl₃) as oxidant. Stainless steel electrodes with mirror finish were coated with P3OT/PS blend by drop-casting technique. In order to study the temperature effect on the function like physical barrier against the corrosive species of P3OT/PS polymeric blend, the coatings were thermally annealed at three different temperatures (55?°C, 80?°C, and 100?°C). The corrosion behavior of P3OT/PS-coated stainless steel was investigated in 0.5 M NaCl at room temperature, by using potentiodynamic polarization curves, linear polarization resistance (LPR), and electrochemical impedance spectroscopy. The LPR values indicated that, at 100?°C, P3OT/PS coatings showed a better protection of the 304 stainless steel in 0.5 M NaCl; the corrosion rate diminished in two orders of magnitude with regard to the bare stainless steel. The superficial morphology of the coatings before and after the corrosive environment was researched by atomic force microscopy, optic microscopy, and scanning electronic microscopy. Morphological study showed that the increased temperature benefited the integration of the two polymeric phases, which improved the barrier properties of the coatings. The coating/metal adhesion and the coating thickness were evaluated. The temperature increases the adhesion degree coating/substrate; thus, the coating annealed at 100?°C showed the best adhesion.     

溶胶-凝胶法制备改性TiO2纳米薄膜及其防腐蚀性能

应用溶胶-凝胶法和浸渍提拉技术在316L不锈钢表面分别制备TiO2纳米膜和 B-Fe-Ce改性的TiO2纳米膜. 采用场发射扫描电子显微镜(FE-SEM)、原子力显微镜(AFM)、拉曼光谱法和能量分散谱(EDS)对薄膜进行表征,通过电化学阻抗谱(EIS)和动电位阳极极化曲线的测试考察薄膜的耐蚀性及对不锈钢的保护性能. 结果表明:两种纳米薄膜均含锐钛矿型的TiO2纳米颗粒,纯TiO2纳米膜与改性后的纳米膜中颗粒直径分别约为15和10 nm. TiO2/316L不锈钢和 B-Fe-Ce-TiO2/316L不锈钢膜电极浸泡在0.5 mo.lL-1 NaCl溶液后,后者的电化学反应电阻较大,动电位阳极极化曲线的稳定钝化区较宽,击穿电位更高,说明改性的纳米膜的耐蚀性及其保护性能更好.     

Synthesis and Properties of Cerium and Titanium Oxide Thin Coatings for Corrosion Protection of 304 Stainless Steel

Powders and thin coatings of ceria and titania were synthesized from aqueous and solvent-based precursors. Thin coatings were deposited on polished 304 stainless steel coupons by dipping them in the appropriate sol-gel oxide precursors. The coatings were subsequently densified and crystallized at several hundreds of degrees. It was possible to obtain dense titania coatings by applying thin coatings of cerium dioxide prior to titania on stainless steel substrates. Underlayer ceria coatings proved to be pivotal in obtaining dense titania coatings and preserving the integrity of the stainless steel while going through the high temperature treatments. The effect of processing parameters such as the atmosphere of heat-treatment, and temperature on the microstructure and crystal structure of the films and powders of ceria and titania was investigated. X-ray diffraction was used to identify the crystal structure of films and powders upon heat-treatment. Electrochemical measurements in NaCl, and analytical techniques such as SEM and EDX were used to evaluate the corrosion performance and pitting morphology of coated samples. A composite coating of ceria and titania was able to prevent crevice corrosion and increase the pitting resistance of the 304 stainless steel relative to the uncoated substrate.     

Investigation of Glass-Like Sol-Gel Coatings for Corrosion Protection of Stainless Steel Against Liquid and Gaseous Attack

Glass-like sol-gel coatings have been investigated as corrosion protective coatings on stainless steel. Magnesium- and borosilicate coatings with thickness of about 100–700 nm and methyl-modified SiO2 coatings with a thickness of about 2 m were deposited on stainless steel plates by dip-coating. The coatings were densified between 400°C and 500°C in different atmospheres (N2, air) for 1 h. The corrosion protection against gaseous attack was investigated by accelerated corrosion tests, at 800°C in air for 1 h. A corrosion protection factor was calculated from the relation Fe/Fe2O3, determined by XRD on the surface of coated and uncoated samples. Methyl-modified SiO2 coatings showed a protection factor, which was 2 orders of magnitude higher than for the other coatings. Electrochemical investigations were performed on samples submerged in a NaCl solution for 200 h. The corrosion propagation, polarization resistance and impedance vector were measured. For accelerated corrosion tests, polarization intensity curves were determined for high potentials of up to 1 V. Again excellent results were obtained for the methyl-modified SiO2 coatings, which remained passive for 200 h. Results of the salt spray corrosion test, however, showed no corrosion protection by the sol-gel coatings. After 2000 h in the salt spray chamber the steel was corroded and the coatings peeled off. It is concluded that for the further development of these coatings an improved interfacial passivation will be required.     

A study on the electrochemical polymerization, characterization, and corrosion protection of o-toluidine on steel

Poly(o-toluidine) (POT) coatings were electrochemically synthesized on 304 stainless steel using cyclic voltammetric method. These coatings were characterized by Fourier transform infrared spectroscopy, UV–vis absorption spectroscopy, and cyclic voltammetry. The corrosion performance of POT coating in aqueous 3 wt% sodium chloride was assessed by the electrochemical techniques such as open circuit potential measurements, potentiodynamic polarization technique, cyclic potentiodynamic polarization measurements, and electrochemical impedance spectroscopy. The results reveal that POT coating on 304 stainless steel prevents general and localized corrosion, and reduces the exchange current density almost by a factor of 45 than bare 304 stainless steel.     

Corrosion resistance of amorphous AlPO4 coating in salty atmospheres

The objective of the present study was to introduce a cost-effective and environmentally friendly coating to improve the corrosion resistance of the structures located in salt water. The coating solution, based on amorphous aluminum phosphate composition, was synthesized by sol–gel process and applied to AISI 304 stainless steel by dip coating technique. X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray spectroscopy analyses were employed to investigate the phase composition and morphology of the coating. Corrosion behavior of the uncoated and coated samples was investigated using standard salt spray test, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution. Salt spray test results for the bare substrate revealed a corrosion rate of six-time greater than that of the coated surface after 168 hr exposure time. Electrochemical test results declared that the amorphous AlPO₄ coating decreased the corrosion current density of the AISI 304 stainless steel by 10 orders of magnitude. Furthermore, according to the corresponding EIS measurements, the coated surface exhibited a superior anti-corrosion performance than uncoated sample. Overall, the results declared that the amorphous AlPO₄ coating could be a good choice for surface protection of stainless steel against electrochemical corrosion in salty environments.     

EIS study on passive films of AISI 304 stainless steel in oxygenous sulfuric acid solution

Electrochemical impedance spectroscopy (EIS) and Kramers–Kronig (K–K) transforms were made on American Iron and Steel Institute (AISI) 304 stainless steel (SS) in naturally aerated sulfuric acid solution at room temperature. The K–K relations testify that the systems under investigation comply with the linearity, causality, and stability constraints of linear system theory (LST) and thereby validate the EIS data. The polarization resistance decreased with removing of passive film and pitting formed in the passive layer, due to layer thinning or pitting caused by chloride. The impedance data for 304 SS with passive films can be accurately modeled using individual components of the equivalent circuits. The polarization resistances (Rp) of the 304 SS can be confirmed by Nyquist plots and estimated from the anodic polarization curves. The reaction model of the dissolution‐passivation process of 304 SS in acid solution is proposed. Copyright © 2009 John Wiley & Sons, Ltd.     

Exploring the relationship between the surface chemistry and the corrosion behavior of electropolymerized polypyrrole films deposited on the surgical ISO 5832-1 stainless steel

In the present work, electropolymerized polypyrrole (PPy) films were obtained on the surface of the surgical ISO 5832-1 stainless steel. The films were obtained from solutions containing 0.1M and 0.5M of the monomer by cyclic voltammetry deposition. The correlation between the surface chemistry of the as-deposited films and the corrosion behavior of the coated substrate is explored. X-ray photoelectron spectroscopy was used to study the chemical state of the main elements in the PPy films. Electrochemical impedance spectroscopy and potentiodynamic polarization tests were employed to evaluate the corrosion resistance of the PPy-coated samples. The tests were conducted in phosphate-buffered saline solution at 37°C. The measured corrosion current densities were dependent on the doping level of the PPy film and decreased with the reduction of the doping level of the PPy layer.     

An Electrochemical Study on the Corrosion Inhibition of Stainless Steel by Polyaniline Film

Polyaniline(PANI)film was electrosynthesized on 304 stainless steel by cyclic voltammetry using aqueous oxalic acid as supporting electrolyte.The potential sweep rates were changed to achieve the PANI film with different thickness and structures.Protective properties of the PANI film for corrosion of stainless steel in 3% NaC1 aqueous solution were investigated by monitoring potentiodynamic polarization curves and electrochemical impedance spectroscopy(EIS).The results showed that the PANI film which was formed with lower sweep rate led to more positive shift of corrosion potential and greater charge transfer resistance,reflecting higher inhibition for corrosion of the stainless steel.     

Corrosion and tribocorrosion behaviour of super‐thick diamond‐like carbon films deposited on stainless steel in NaCl solution

Super‐thick diamond‐like carbon (DLC) film is a potential protective coating in corrosive environments. In the present work, three kinds of DLC films whose thickness and modulation periods are 4 µm and 3, 21 µm and 17 and 21 µm and 7, respectively, were fabricated on stainless steel. The effect of different thickness and modulation periods on corrosion and tribocorrosion behaviour of the DLC‐coating stainless steel was investigated in 3.5 wt% NaCl aqueous solution by a ball‐on‐flat tribometer equipped with a three‐electrode electrochemical cell. The DLC‐coating stainless steel served as a working electrode, and its OCP and potentiodynamic polarization were monitored before and during rubbing. The wear–corrosion mechanism of the DLC films was investigated by SEM. The results showed that the increasing thickness can prolong significantly lifetime of DLC films in NaCl aqueous solution. In particular, the modulation period has a significant impact on the tribocorrosion resistance of the DLC super‐thick films. The study suggested that the increasing thickness of compressive stress layer could suppress film damage by reducing crack propagation rate. Thus, the super‐thick DLC film with thickness of 21 µm and 7 periods presented the best tribocorrosion resistance among all studied films. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of serum proteins on corrosion behavior of ISO 5832–9 alloy modified by titania coatings

Stainless steel ISO 5832–9 type is often used to perform implants which operate in protein-containing physiological environments. The interaction between proteins and surface of the implant may affect its corrosive properties. The aim of this work was to study the effect of selected serum proteins (albumin and γ-globulins) on the corrosion of ISO 5832–9 alloy (trade name M30NW) which surface was modified by titania coatings. These coatings were obtained by sol–gel method and heated at temperatures of 400 and 800 °C. To evaluate the effect of the proteins, the corrosion tests were performed with and without the addition of proteins with concentration of 1 g L^?1 to the physiological saline solution (0.9 % NaCl, pH 7.4) at 37 °C. The tests were carried out within 7 days. The following electrochemical methods were used: open circuit potential, linear polarization resistance, and electrochemical impedance spectroscopy. In addition, surface analysis by optical microscopy and X-ray photoelectron spectroscopy (XPS) method was done at the end of weekly corrosion tests. The results of corrosion tests showed that M30NW alloy both uncoated and modified with titania coatings exhibits a very good corrosion resistance during weekly exposition to corrosion medium. The best corrosion resistance in 0.9 % NaCl solution is shown by alloy samples modified by titania coating annealed at 400 °C. The serum proteins have no significant effect onto corrosion of investigated biomedical steel. The XPS results confirmed the presence of proteins on the alloy surface after 7 days of immersion in protein-containing solutions.     

Performance of some thiophene derivatives as corrosion inhibitors for 304 stainless steel in aqueous solutions

The inhibitive effect of 2-cyano-3-hydroxy-4(Ar)-5-anilino thiophene derivatives on the corrosion of 304 stainless steel (SS) in 3 M HCl solution has been investigated by weight loss, galvanostatic polarization techniques, and potentiodynamic anodic polarization in 3.5 % NaCl. The results indicate that these compounds act as inhibitors retarding the anodic and cathodic corrosion reactions. The presence of inhibitors does not change the mechanism of either hydrogen evolution reaction or SS dissolution. The activation energy and some thermodynamic parameters are calculated and discussed. These compounds are mixed-type inhibitors in the acid solution, and their adsorption on the SS surface is found to obey the Temkin adsorption isotherm. The results suggest that the percentage inhibition of these thiophene derivatives increases with increasing inhibitor concentration and decreases with increasing temperature. The synergistic parameter (S) was calculated and found to have a value greater than unity, indicating that the enhanced inhibition efficiency caused by the addition of I^?, SCN^?, and Br^? is only due to a synergistic effect. The relationship between molecular structure and inhibition efficiency was elucidated by quantum-chemical calculations using semi-empirical self-consistent field (SCF) methods.     

Sol-gel ZrO2 coatings for chemical protection of stainless steel

ZrO₂ coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC₃H₇)₄ as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm³ of ZrO₂. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 m. The influence of the ZrO₂ coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.     

Mechanical and corrosion behavior of amorphous and crystalline electroless Ni–W–P coatings

Two types of electroless Ni–W–P coatings: nanocrystalline with low P and amorphous with higher P content are investigated. Scanning probe microscopy is applied to study their morphology. Textured nanocrystalline coatings consist of coarse pyramids built of nanometer thick lamellas. The surface morphology of amorphous coatings is much finer and uniform. Nanohardness of all coatings depends on W content. Microhardness is increasing during the heat treatment up to 350 °C due to nickel phosphide precipitation affected by tungsten also. The wear resistance of nanocrystalline Ni–W–P coatings is much higher than that of amorphous in spite of the similar tungsten content in both. Lower corrosion resistance of amorphous Ni–W–P coatings is found by weight loss method during long-term immersion in 5 % NaCl. Electrochemical tests by potentiodynamic polarization curves in two model corrosion media—solutions of 0.5 M H₂SO₄ and 5 % NaCl—are performed. The corrosion of bi-layered Ni–W–P/Ni–P and Ni–W–P/Ni–Cu–P deposits on mild steel is also investigated. The results prove that an electroless Ni–W–P coating on mild steel extremely improves its mechanical and corrosion behavior. It is demonstrated that in addition to deposit’s structure and composition, the distribution and chemical state of alloy ingredients are also responsible for its properties.     

Sol-Gel Deposition of ZrO2 Films in Air and in Oxygen-Free Atmospheres for Chemical Protection of 304 Stainless Steel: A Comparative Corrosion Study

ZrO₂ coatings for corrosion protection were deposited on 304 stainless steel by sol-gel method using zirconium propoxide as precursor and densified in air and in oxygen-free (argon or nitrogen) atmospheres. XRD and IR data of the films were practically independent of the atmosphere used in the densification step showing that the ceramic oxide is properly formed from the precursor. The corrosion behavior of the stainless steel substrate was studied by potentiodynamic polarization curves in the absence and the presence of ZrO₂ coatings prepared in air, argon or nitrogen. The coatings extended the lifetime of the material by a factor of almost eight in a very aggressive environment, independently of the preparation procedure. The possibility of depositing pure or mixed oxide films by sol-gel methods in the absence of additional oxygen will allow the preparation of specific coatings onto oxygen-reactive substrates.     

Dynamic electrochemical impedance spectroscopy measurements of passive layer cracking under static tensile stresses

Electrochemical impedance spectroscopy allows the examination of corrosion susceptibility and resistance for different construction materials, in particular the determination of the properties of their passive films. This technique makes possible the analysis of electrochemical processes in time domain, including rapid phenomena such as changes in the properties of passive films, but it has never been used for passive layer cracking examination. In many cases, fracture of the passive film under tensile stresses leads to stress corrosion cracking. Therefore, investigations of passive layer cracking on austenitic stainless steels under tensile stresses facilitate the understanding of the mechanism of stress corrosion cracking in these common engineering materials. The effect of static tensile stresses on the passive film cracking behaviour of type 304L stainless steel immersed in 0.5 M NaCl solution at room temperature has been investigated. This paper presents the impedance spectra obtained for 304L stainless steel samples at different potential values.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Inclusion of W in electroless Ni–B coating developed from a stabilizer free bath and investigation of its tribological behaviour

In the present study, tribological and corrosion behaviour of electroless Ni–B–W (ENB-W) coatings prepared from stabilizer-free baths and deposited on AISI 1040 steel substrates were examined. Three distinct coating bath temperatures (85 °C, 90 °C, and 95 °C) were varied for coating deposition. The coatings showed nodular morphology. Thermogravimetric study of ENB-W coatings revealed improved thermal stability attained at 95 °C bath temperature. The microhardness of ENB-W coating was 645, 690, and 720 HV₁₀₀ at bath temperatures of 85 °C, 90 °C, and 95 °C respectively. The inclusion of W to Ni–B coating enhanced the hardness by ∼150 HV₁₀₀. On a pin-on-disc tribometer, wear test was conducted. The precipitation of Ni (111) and its borides occurred post sliding wear at high temperatures (300 °C). Ni (111) crystallite size decreased because of high temperature sliding wear at 300 °C with an increase in coating bath temperature. With a reduction in crystallite size at high temperatures, both wear rate and COF decreases. The scratch hardness and first critical load of failure of the coatings was determined using a scratch tester. Using potentiodynamic polarization, corrosion resistance of ENB-W coatings in 3.5% NaCl was investigated. ENB-W coatings could provide shielding to AISI 1040 steel from corrosion. Though the corrosion resistance is poor with respect to lead stabilized coatings.     

Two layered silica protective film made by a spray-and-dip coating method on 304 stainless steel

The silica coating has attracted much attention because of its superior corrosion resistance with almost no harm to human health and to the environment. In this study, a two layered silica film was tried to get an enhanced corrosion resistance. The silica film was prepared on the hairline finish 304 stainless steel surfaces by-a-spray- and subsequent-dip-coating process. The spray coating solution was prepared by mixing sodium silicate solution, silica colloid, tetraethyl orthosilicate (TEOS), methyltriethoxysilane (MTES), ethanol, and distilled water. Then the solution was sprayed onto the stainless steel surface, and was dried and heat treated. The dip coating solution was prepared by a simple mixing of TEOS and acidic water into ethanol, and the prior spray coated sample was dipped into the solution. The outer dip coated layer was intended to cover spray coated rough and porous layer and hence to enhance the corrosion resistance. A homogeneous and crack free surface was successfully obtained after the dip coating. The prepared silica film was characterized using scanning electron microscopy, potentiodynamic polarization scan, and electrochemical impedance spectroscopy. The two layered film showed an enhanced corrosion resistance. The enhancement was attributed to a protecting effect of the dip coated layer where the diffusion of ionic species was successfully impeded.     

Effect of cyclic oxidation on electrochemical corrosion of type 409 stainless steel in the simulated muffler condensates

The electrochemical corrosion behavior of 409 stainless steel after cyclic oxidation below 400 °C was investigated in the simulated muffler condensates by using surface analysis and electrochemical measurement techniques. In the cyclic processes of condensate-dipping and oxidation, specimens may form defective oxide films and weak Cr depletion underlying the oxide films. Sulfate from the condensate-dipping will give rise to sulfidation during the cyclic oxidation, being detrimental to both the oxidation and corrosion properties of stainless steel. The oxidation above 300 °C deteriorates the corrosion resistance, even leading to active corrosion in the acidic condensate solutions. Comparatively, specimens oxidized cyclically without condensate-dipping show much higher condensate corrosion resistance. It is suggested that the acidic condensate corrosion is accelerated by the synergetic effect of oxidation and condensation in the mufflers, and then may result in perforation through the defects such as cracks and nodules in oxide films on the stainless steel surface.     

hytic Acid Conversion Coatings of Magnesium

A chrome‐free conversion coating treatment for magnesium by phytic acid solution was developed. The immersion experiments were used for evaluating the effects of the processing parameters (such as conversion temperature and time, concentration and pH value of phytic acid solution) on the corrosion resistance of the phytic acid conversion coating. The morphologies and compositions of the coatings were determined by SEM and EDS respectively. The experimental results indicated that the corrosion resistance of the conversion coating formed in the solution containing 0.5% phytic acid at 25°C and pH=4 for 30 min was higher than that of natural oxide, and the conversion coating formed on the surface of magnesium was of multilayer mainly consisting of Mg, C, O and P. The thicknesses of the conversion coatings were approximately 1.0–15 µm and the conversion coatings presented obvious network‐like cracks. The electrochemical potentiodynamic polarization experiment indicated that the free corrosion potential of the magnesium with phytic acid conversion coating was increased, and its corrosion current and corrosion rate declined in 3.5% NaCl solution. Phytic acid conversion coating could improve the electrochemical property of magnesium and provide effective protection, which can improve the corrosion resistance of magnesium.