Pd改性多活性位点催化剂NH3-SCR脱硝反应机理研究

低温SCR脱硝技术具有效率高、能耗低、无二次污染等优点,是很有前途的脱硝净化技术.我们制备了一系列多活性位点催化剂（Pd_xV_y/TiO₂）,并对其NH₃-SCR脱硝性能进行了测试分析.结果表明,Pd_0.12V₄/TiO₂催化剂在250℃时可达到接近100%的NO_x转化率和N₂选择性.结合XRD、TEM、XPS、H₂-TPR、in situ DRIFT和DFT分析,考察了催化剂表面NO_x催化脱除机理.所得数据表明,该催化剂对NH₃、O₂和NO_x等反应气体分子表现出强烈的吸附性能,且均为化学吸附,所有组分（Pd O_x和VO_x）在NO_x的催化脱除中发挥着不可或缺的作用,而氧化还原循环(2V⁴⁺(Ti     

臭氧氧化结合湿法喷淋对玻璃窑炉烟气同时脱硫脱硝实验研究

采用臭氧氧化结合湿法喷淋对模拟玻璃窑炉烟气开展了同时脱硫脱硝实验研究.采用不同溶液(NaOH、Na₂S)进行了喷淋实验.结果表明,保证溶液pH值在10以上,NaOH浓度对NO_x脱除效率无影响,SO₂的存在促进了NO_x吸收.当O₃/NO物质的量比为1.6、溶液NaOH浓度为0.5%时,NO_x脱除效率可达70%,SO₂脱除效率在99%以上.往喷淋液中添加Na₂S,NO_x脱除效率随Na₂S浓度增加而提高,SO₂的存在对NO_x脱除效率无影响.当O₃/NO物质的量比为1.2、溶液中NaOH浓度为0.5%、添加剂Na₂S浓度为0.6%时,NO_x脱除效率可达70%,SO₂脱除效率在95%以上.60 min长时间运行实验证明,模拟烟气中的NO_x经碱液和添加剂吸收后主要以NO^-₂的形式存在于喷淋液中,且NO_x脱除效率不随溶液pH值的变化而变化.     

FeZSM-5骨架调控及其对NOx的SCR性能研究

通过水热法合成了不同硅铝比和硅铁比的FeZSM-5系列催化剂,并将其应用于对模拟烟气的氨气选择性催化还原(NH₃-SCR)脱除氮氧化物(NO_x)研究。通过XRD、 SEM、 TEM、 UV-Vis和N₂吸附,探究了不同硅、铝铁含量对催化剂孔道结构、物相结构及脱硝活性的影响。结果表明：过高的铝、铁含量会造成催化剂结晶度的降低、物相结构不均一;FeZSM-5(60-60)最佳比例的铝、铁催化剂在低温条件下仍可以表现出较好的活性以及优异的抗硫抗水热稳定性,FeZSM-5(60-60)最佳脱硝效率达97%。通入SO₂和H₂O时,NO_x转化率仍可保持在85%以上;停止通入SO₂和H₂O时,NO_x的转化率恢复至97%。     

烟气中二噁英的催化降解*

催化降解是一种工业烟气的末端处理技术,该技术基于催化氧化还原反应能够实现烟气中二噁英（PCDD/Fs）在温和条件下的有效去除。目前研究较多的催化剂主要有两类：一类是Pt、Pd、Lr等贵金属型催化剂,另一类是V、Cr、W等过渡金属氧化物型催化剂。在实际应用方面,选择性催化还原（SCR）是目前最具有代表性的技术,采用V₂O₅/W(Mo)O₃-TiO₂催化剂能够同时脱除烟气中的PCDD/Fs和NO_x。本文阐述了贵金属和金属氧化物两种催化剂在温和条件下降解烟气中PCDD/Fs的反应机理和研究进展,并着重介绍了负载型V基催化剂降解PCDD/Fs的配方优化研究和影响因素,最后评述了SCR的应用情况和应用条件,以及在应用过程中催化剂的失活和中毒情况,并对该技术发展方向加以展望。     

烟气共存成分对微波辐照活性炭同时脱硫脱硝的影响研究

研究了O₂、CO₂以及水蒸气等各种烟气共存成分对微波辐照活性炭脱硫脱硝的影响。实验结果表明,SO₂对烟气脱硝有一定的抑制作用;烟气中水蒸气会抑制脱硫,低浓度水蒸气含量使脱硝效率上升,但高浓度水蒸气使脱硝效率下降;O₂和CO₂的存在可在一定程度上促进脱硫脱硝,但高浓度的O₂和CO₂会造成活性炭的损耗,从而抑制与脱硫和脱硝有关的还原反应。采用此方法可有效脱除烟气中SO₂和NO_{x,其脱除效率均在90%以上。}     

Mn/Fe负载活性炭低温脱硝协同脱汞实验研究

采用等体积浸渍法制备了Mn/Fe负载椰壳活性炭碳基催化剂Mn-Fe/HAC。在固定床实验台上研究了反应温度、体积空速(GHSV)和烟气组分(O₂、CO、SO₂和Hg⁰)对其脱硝脱汞性能的影响,并结合N2吸附-脱附、NH₃-TPD、H2-TPR、Hg-TPD以及瞬态反应测试,分析其脱硝脱汞机理。结果表明,Mn/Fe负载可以明显促进碳基催化剂低温脱硝活性,添加Fe可提高催化剂表面的酸性位点数量和还原能力,促进催化剂活性,进一步拓宽其脱硝温度窗口;7Mn0.5Fe/HAC催化剂在160-220℃下的脱硝效率可达95%,且在100-220℃下Mn和Fe负载碳基催化剂脱汞效率基本稳定在100%。7Mn0.5Fe/HAC催化剂脱硝效率随着GHSV增加而逐渐降低,而脱汞效率则保持稳定。无O₂条件下Mn/Fe催化剂脱硝效率较低(约为50%),而当烟气中O₂含量大于6%,其脱硝效率可稳定在95%以上。Hg⁰浓度对Mn/Fe负载碳基催化剂脱硝性能影响不大...     

WO3对MnOx/TiO2低温脱硝SCR催化剂的改性研究

以醋酸锰为前驱物通过浸渍法制备了MnO_x/TiO₂催化剂,用WO₃对载体进行改性制得一系列MnO_x-WO₃/ TiO₂催化剂,采用X射线衍射（XRD）、比表面积测定(BET)、拉曼光谱(LRS)、原位红外(FT-IR)光谱等表征技术进行相关的微观表征分析,同时在模拟氨气选择性催化还原NO_x（NH₃-SCR）的反应条件下对催化剂的脱硝反应活性进行了考察。研究表明,添加5%的WO₃拓展了载体的比表面积,提高了催化剂的抗热性,增加了催化剂表面的Brnsted酸位,拓宽其选择性催化还原脱硝活性温度窗口,对MnO_x/TiO₂催化剂有很好的改性作用;先钨后锰的负载顺序优于先锰后钨;随着温度的升高,化学催化反应速率提高,催化剂表面NH₃吸附峰呈减弱或消失趋势,故催化剂脱硝活性温度曲线呈中间高、两头低。     

SCR催化剂的组成对其脱硝性能的影响

在以TiO₂为载体的基础上,考察了活性组分WO₃和V₂O₅的质量分数以及SiO₂和Al₂O₃的加入对SCR催化剂脱硝性能的影响,筛选出的最佳催化剂组成与某商业催化剂的催化活性、制备方法和催化剂组成进行比较。结果表明,SiO₂和Al₂O₃的加入会降低催化剂的脱硝性能,筛选出的最佳催化剂组成为0.5%V₂O₅～10%WO₃/TiO₂;与实验室通过溶胶 凝胶法制备载体然后负载活性组分的制备方法不同,商业催化剂是将粒径均匀的锐钛矿型TiO₂与玻璃纤维（主要成分为SiO₂和Al₂O₃）通过黏合剂混合制备成型的催化剂载体,然后负载活性组分;由于制备方法和催化剂组成等方面的较大差异,0.5%V₂O₅～10%WO₃/TiO₂在低于603K时具有很好的NO脱除率,而商业催化剂在实际烟气温度(603K~663K)范围内,能稳定保持90%以上脱硝率。     

沥青基球状活性炭担载尿素用于NO2的低温选择性催化还原行为研究

将作为还原剂的尿素担载于沥青基球状活性炭(PSAC)上研究了NO₂的低温选择性催化还原(SCR)反应。结果表明,PSAC上尿素担载量的提高可以增大NO₂与尿素的反应几率;当尿素担载量由8%提高到30%时,SCR反应脱硝活性显著提高,脱硝时间相应延长。在30~90℃,升高反应温度会减小NO₂在PSAC表面的吸附量,从而导致NO_x的脱除量减小。增加反应气氛中NO₂和O₂的浓度均有利于脱硝活性的提高,但当O₂进料浓度大于9%时,继续增加O₂进料浓度对脱硝活性的改善作用变得微弱。降低空速有利于提高脱硝活性和延长脱硝时间。当反应温度为30℃、空速为2000h^-1、NO₂和O₂的进料浓度分别为0.05%和21%时,尿素担载量为8%的PSAC可在49h内实现85%以上的NO_x转化率。     

Mn/Ce改性菱铁矿催化剂在SCR脱硝反应中的特性研究

富含过渡元素的菱铁矿是用于制备选择性催化还原（SCR）脱硝催化剂的理想材料。在本研究中,对菱铁矿掺杂了Mn和Ce,并研究了Mn-Ce共掺杂改性菱铁矿在NH₃-SCR反应中去除NO_x的活性。结果表明,经过450℃煅烧后菱铁矿的主要成分FeCO₃能够转化为Fe₂O₃。菱铁矿掺杂Mn和Ce后能够提高比表面积和表面酸度,降低硫酸铵盐在催化剂表面上的热稳定性。因此,Mn-Ce共掺杂改性菱铁矿催化剂表现出较高的SCR脱硝活性和抗硫性。3% Mn1% Ce-菱铁矿催化剂在脱硝效率高于90%的温度窗口能够拓宽至180-300℃,同时在引入SO₂ 7.5 h后该催化剂的脱硝效率仍高于75%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.