功能化磁性纳米粒子在乳状液制备及破乳中的应用及作用机制

功能化磁性纳米粒子因其独特的理化性质,在乳状液制备与破乳领域的应用受到广泛关注。本文归纳了功能化磁性纳米粒子的制备方法、合成结构与特征性质,阐述了其在乳状液制备及破乳中的应用过程,重点分析了磁性纳米粒子在溶液中良好分散、稳定吸附于油水界面排布为膜结构的作用行为,尤其是磁性纳米粒子的磁响应特征对乳状液中界面性质、液滴形貌及运动状态的影响,并进一步总结出其表面性质及作用行为对稳定乳状液或使乳状液破乳的规律。针对磁性纳米粒子对乳状液稳定性影响规律的探究可为其在应用领域提供理论支持。最后本文就功能化磁性纳米粒子研究中亟待解决的新问题作出展望。     

液滴模板法制备颗粒材料过程中介尺度结构调控的研究进展

以液滴模板法来制备颗粒材料,可通过对液滴以及颗粒界面介尺度结构的形成与反应的定向调控来实现对固体颗粒功能材料的高效制备和性能强化。深入研究液滴和固体颗粒界面介尺度结构与反应-扩散过程的相互关系及其定向调控规律,揭示反应与扩散过程的机制及其耦合,对于实现反应过程强化与理性调控具有重要的意义。本文主要介绍了液滴模板法制备颗粒材料过程中的介尺度结构调控的研究新进展,着重介绍了界面两亲分子聚集态介尺度结构对液滴形貌的定向调控及对液滴稳定性的影响、以及液滴界面传递与反应对颗粒材料介尺度结构的定向调控,以期为液滴模板法合成颗粒材料的反应过程强化与理性调控提供科学指导。     

黏弹性对介观液珠聚并的影响——液珠-细丝-液珠聚并现象及其分析

在四辊流变仪中,黏弹性高分子介观液滴经反复拉伸和松弛形成了有细丝相连的两个黏弹液珠,研究了黏弹液珠的聚并过程,依形状叫做BSB(bead-string-bead,液珠-细丝-液珠)聚并.BSB现象与常见的通过滴间液膜破裂实现的液滴聚并过程大不相同.根据界面上的Laplace力、液珠移动时的黏性阻力和细丝中黏弹应力之间的平衡,推导出一个力学模型来描述BSB现象,理论分析与实验结果相符较好.细丝直径的变化和稳定性由过程参数和物料参数共同决定,尤其是液滴的黏弹性有较大影响.这一效应对多相高分子与复杂流体加工过程的基础理解富有启发.     

弛豫法研究预交联颗粒凝胶的界面扩张流变性质

采用界面张力弛豫方法研究了一种新型聚合物--预交联颗粒凝胶(PPG)的界面流变性质, 考察了电解质及传统直链聚丙烯酰胺与PPG的相互作用对体系界面性质的影响, 计算得到了各体系界面扩张弹性和黏性的全频谱, 并通过归一法计算得到了相应的Cole-Cole图. 结果表明, 随着体相浓度的增加, PPG在界面层中形成网络结构, 界面扩张弹性和黏性大幅增强. 电解质能够中和PPG结构中的电荷, 明显降低扩张弹性和黏性. 直链聚丙烯酰胺与PPG在界面上可能形成更为复杂的结构, 膜的黏弹性由PPG决定.     

附加压力与分散系统的稳定性

较详细地讨论了附加压力与分散系统稳定性间的关系,指出分散相附加压力的降低是分散系统趋向稳定的根本原因。以乳状液为例,附加压力降低不仅减少了液滴间相互碰撞的概率,而且更重要的是,它与液滴表面形成牢固的保护膜密切相关。只有当液滴的附加压力趋近0时,分散系统才达到热力学上稳定的状态,此时乳状液已变成了微乳状液。上述讨论也基本适用于固/液分散系统。     

天然蚕丝丝素蛋白的乳化活性

采用不同油相制备了系列丝素蛋白乳液, 研究了丝素蛋白浓度、 油相体积分数和油相极性对丝素蛋白的乳化活性指数、 丝素蛋白乳液的稳定性和类型及乳液液滴的微观形态、 粒径与zeta电位的影响, 探讨了丝素蛋白的乳化活性和乳液稳定机制. 结果表明, 丝素蛋白具有两亲性和表面活性, 可在油水界面富集并形成稳定的黏弹性保护膜; 丝素蛋白的乳化活性随其浓度的增大而减小, 随油相体积分数的增大而增大; 丝素蛋白浓度和油相体积分数的增加可提高稳定乳液体积分数.     

SiO_2纳米颗粒与聚氧乙烯对Pickering乳液的协同稳定作用

研究了聚氧乙烯(PEO)与SiO2纳米颗粒对水/二甲苯体系Pickering乳液的协同稳定作用.实验发现,PEO的存在减小了乳液液滴的平均直径,抑制了乳液的相反转,有效阻止了乳液的熟化,使乳液具有更好的稳定性.进一步对纳米颗粒膜的流变性质进行研究,结果表明,PEO高分子促进了纳米颗粒形成更大尺寸的聚集结构,提高了其在界面上的吸附性,增强了颗粒膜的力学性能,在较小颗粒用量条件下使得Gibbs稳定性判据得到满足.     

三元复合驱碱/表面活性剂/聚合物模拟原油乳状液稳定动力学特性

基于两相分离的乳状液稳定模型,研究了三元复合驱模拟原油乳状液稳定动力学特性;通过液膜强度和油水界面张力探讨了碱/表面活性剂/聚合物对模拟原油乳状液稳定动力学特性的影响机理。 结果表明,乳状液稳定模型可以很好的评价乳状液的稳定性,并得到乳状液的稳定动力学特性;碱浓度小于900 mg/L有利于乳状液的稳定,碱浓度大于900 mg/L不利于乳状液的稳定;表面活性剂和聚合物浓度的增加使得形成的模拟原油乳状液更加稳定;模拟原油乳状液的稳定作用主要是通过碱、表面活性剂降低油水界面张力并增加油水界面膜强度,聚合物通过提高界面膜强度实现的,三者存在协同效应。     

SiO2纳米颗粒与聚氧乙烯对Pickering乳液的协同稳定作用简

研究了聚氧乙烯(PEO)与SiO2纳米颗粒对水/二甲苯体系Pickering乳液的协同稳定作用. 实验发现,PEO的存在减小了乳液液滴的平均直径,抑制了乳液的相反转,有效阻止了乳液的熟化,使乳液具有更好的稳定性. 进一步对纳米颗粒膜的流变性质进行研究,结果表明,PEO高分子促进了纳米颗粒形成更大尺寸的聚集结构,提高了其在界面上的吸附性,增强了颗粒膜的力学性能,在较小颗粒用量条件下使得Gibbs稳定性判据得到满足.     

Pickering多重乳状液的一步法合成及形成机理研究

使用锂皂石层状纳米颗粒与表面活性剂(Span80)复配制备乳状液的过程中, 在乳化之前对锂皂石颗粒水分散体系进行稀释, 则可以通过一步法制备出性能稳定的W/O/W型Pickering多重乳状液. 研究了Span80浓度、锂皂石浓度以及稀释用水的量对生成乳状液的类型及稳定性的影响规律, 对一步法合成Pickering多重乳状液的成因及机理进行了探讨和分析. 实验结果表明, 对锂皂石颗粒水分散体系的稀释是一步法合成稳定Pickering多重乳状液的关键因素, 稀释用水的量决定了多重乳状液中的内水相体积. 随着Span80浓度的增加, 多重乳状液的粒径减小, 稳定性迅速增加. 锂皂石颗粒的浓度能够影响乳状液的类型, 但对乳状液的稳定性以及乳状液的粒径影响不大. 锂皂石颗粒在水分散体系中缓慢的扩散速率是一步法合成Pickering多重乳状液的主要原因.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.