Molecular recognition in imprinted polymers: thermodynamic investigation of analyte binding using microcalorimetry

This study aimed at elucidating the interaction mechanism between an imprinted polymer and its template in aqueous environment with thermodynamic aspects. The herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) was chosen as a model template to imprint a co-polymer of 4-vinylpyridine (4-VP) and ethyleneglycol dimethacrylate. Equilibrium binding isotherm analysis and isothermal titration microcalorimetry were used to quantify the contribution of enthalpy and entropy to the binding process, identify the nature of the interactions involved and confirm the existence of binding pockets with shape-complementarity to the template. For the binding process of 2,4-D to the imprinted polymer, we postulate three subprocesses: (1) dehydration of the binding pocket and of the 2,4-D, (2) adsorption of 2,4-D, and (3) rearrangement of the water molecules from the dehydration process. We found that binding in aqueous environment was due to the cumulative effect of pi-stacking and electrostatic interactions between the template and the functional monomers. At pH<6, entropy is the dominating driving force, while at pH>6 where the highest difference in binding between the imprinted and a non-imprinted reference polymer was observed, the enthalpy change accounts for most of the binding free energy. The developed microcalorimetric method sheds light on the binding mechanism of analyte molecules with imprinted polymers, in particular if the polymers are used in aqueous solvents.     

Water‐compatible halloysite‐imprinted polymer by Pickering emulsion polymerization for the selective recognition of herbicides

A water‐compatible molecularly imprinted polymer was prepared by Pickering emulsion polymerization using halloysite nanotubes as stabilized solid particles. During polymerization, we used 4‐vinylpyridine as monomer, divinylbenzene as cross‐linking agent, toluene as porogen, 2,2‐azobisisobutyronitrile as initiator, 2,4‐dichlorophenoxyacetic acid as template to form the oil phase, and Triton X‐100 aqueous solution to form the water phase. The halloysite nanotubes molecularly imprinted polymer was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Kinetic and equilibrium bindings were also employed to evaluate the adsorption properties of the imprinted polymer. The imprinted polymer showed better selectivity, more rapid kinetic binding (60 min) for 2,4‐dichlorophenoxyacetic acid in pure water compared with rebinding in toluene. The imprinted polymer was used as a sorbent to enrich and separate 2,4‐dichlorophenoxyacetic acid from water, and was detected by high‐performance liquid chromatography with UV detection.     

光响应性有机-无机杂化分子印迹聚合物的制备及表征

以4-硝基苯酚、 2,4-二氯苯氧乙酸和3-氯丙基三乙氧基硅烷为原料, 经氧化偶合、 酰化、 酯化反应合成了共价结合模板分子2,4-二氯苯氧乙酸(2,4-D)的光响应性含有机硅的偶氮苯功能单体, 通过溶胶-凝胶法制备了光响应性的有机-无机杂化分子印迹聚合物(OIHMIP). 研究了该分子印迹聚合物光响应性能、 对2,4-D的吸附性能和选择识别及光控释放与吸收能力, 用原子力显微镜对其形貌进行了表征. 结果表明, 制得的OIHMIP具有规则的球形, 粒径介于150～200 nm之间. OIHMIP对2,4-D具有良好的吸附和选择识别能力, 在365和440 nm的紫外-可见光交替照射下, 可控制2,4-D的释放与吸收.     

Molecularly imprinted polypyrrole nanonecklaces for detection of herbicide through molecular recognition-amplifying current response

Molecularly imprinted polypyrrole (PPy) nanonecklaces were facilely synthesized through a two-step oxidative polymerization route for the amperometric detection of non-electrochemically active herbicide. It has been demonstrated that dissolved oxygen can preoxidize pyrrole to form PPy oligomer bundles, which further self-assemble into necklace-like micelles in the presence of cetyltrimethylammonium bromide. Subsequently, these microstructures were immediately gelled through quick polymerization of residual pyrrole monomers, leading to the formation of PPy nanonecklaces. Meanwhile, herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) was synchronously imprinted into the formed PPy and highly dense imprinted sites were generated in PPy nanonecklaces because the necklace-like structure with microgaps/pores provides the facile and complete removal of templates. The imprinted nanonecklaces exhibit the high capacity and fast kinetics to uptake 2,4-D molecules, and produce a imprinting factor of ∼4.2. Importantly, the recognition and binding to 2,4-D significantly amplify the current response by a factor of 8 times in amperometric measurements, providing a sensitive detection of 2,4-D. The molecular imprinting strategy opens a novel avenue to the direct detection of non-electrochemically active species in a more convenient, simpler and cheaper way than the traditional competition-displacing approaches.     

Preparation of core-shell molecularly imprinted polymer via the combination of reversible addition-fragmentation chain transfer polymerization and click reaction

In this paper, we demonstrated an efficient and robust route to the preparation of well-defined molecularly imprinted polymer based on reversible addition-fragmentation chain transfer (RAFT) polymerization and click chemistry. The alkyne terminated RAFT chain transfer agent was first synthesized, and then click reaction was used to graft RAFT agent onto the surface of silica particles which was modified by azide. Finally, imprinted thin film was prepared in the presence of 2,4-dichlorophenol as the template. The imprinted beads were demonstrated with a homogeneous polymer films (thickness of about 2.27 nm), and exhibited thermal stability under 255°C. The as-synthesized product showed obvious molecular imprinting effects towards the template, fast template rebinding kinetics and an appreciable selectivity over structurally related compounds.     

Novel visible-light-responsive photoelectrochemical sensor of 2,4-dichlorophenoxyacetic acid using molecularly imprinted polymer/BiOI nanoflake arrays

A novel and highly sensitive visible-light photoelectrochemical (PEC) sensor for the detection of 2,4-D has been developed using a nanocomposite of molecularly imprinted gold nanoparticles-polypyrrole polymer (MIP) modified BiOI nanoflake arrays (BiOINFs) as a photoactive electrode (labeled as MIP@BiOINFs). Our results demonstrate that the smart combination of BiOINFs with MIP offers a high-performance photoactive sensing platform. It features the intrinsically excellent visible-light responsive properties of BiOI and prominent recognition ability from MIP. The designed MIP@BiOINF composite dramatically facilitates the PEC determination of 2,4-D. The detection limit for 2,4-D is found to be as low as about 0.04 ng mL^− 1 (S/N = 3). Moreover, the resulting sensor could be used to detect 2,4-D in spiked soil samples.     

Synthesis,characterization and application of dummy-template molecularly imprinted microspheres for 2,4-d butyl ester

Dummy-template molecularly imprinted microspheres were synthesized via precipitation polymerization employing 2,4-D isooctyl ester as the template molecule instead of 2,4-D butyl ester, while methacrylic acid and divinylbenzene were used as functional monomer and cross-linker in acetonitrile or a mixture of acetonitrile and toluene. The microspheres were characterized by scanning electron microscopy, laser particle size analyzer and fourier transform infrared spectrometry. Binding capacity experiment showed that the molecularly imprinted polymers prepared in a mixture of acetonitrile and toluene had a high binding capacity. The performance of microspheres was further assessed by equilibrium binding and kinetic adsorption experiments. The results showed that the apparent maximum adsorption reached up to 1.35 mg·g^?1 within 10 min. Based on the dummy-template microspheres, a molecularly imprinted solid phase extraction-gas chromatography method was developed for the selective analysis of 2,4-D butyl ester in soil samples. The mean recoveries of 2,4-D butyl ester from blank soil samples ranged from 85.9 to 99.3% with relative standard deviations of 4.5–14.3% (n = 5). The limit of detection and the limit of quantification of 2,4-D butyl ester were 0.8 μg·kg^?1 and 2.3 μg·kg^?1, respectively.     

Synthesis of surface molecularly imprinted polymer and the selective solid phase extraction of imidazole from its structural analogs

A surface molecularly imprinted polymer (MIP) was synthesized by using imidazole as the template and modified silica particles as the support material. The static adsorption, solid phase extraction (SPE) and high-performance liquid chromatography (HPLC) experiments were performed to investigate the adsorption properties and selective recognition characteristics of the polymer for imidazole and its structural analogs. It was shown that the maximum binding capacities of imidazole on the MIP and the non-imprinted polymer (NIP) were 312 and 169 μmol g⁻¹, respectively. The adsorption was fast and the adsorption equilibrium was achieved in 30 min. The binding process could be described by pseudo-second order kinetics. Compared with the corresponding non-imprinted polymer, the molecularly imprinted polymer exhibited much higher adsorption performance and selectivity for imidazole. The selective separation of imidazole from a mixture of 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]) and 2,4-dichlorophenol could be achieved on the MIP-SPE column. The recoveries of imidazole and [C₆mim][Br] were 97.6-102.7% and 12.2-17.3%, respectively, but 2,4-dichlorophenol could not be retained on the column. The surface molecularly imprinted polymer presented here may find useful application as a solid phase absorbent to separate trace imidazole in environmental water samples. This may also form the basis for our research program on the preparation and application of alkyl-imidazolium imprinted polymers.     

Preparation and characterization of molecularly imprinted electropolymerized carbon electrodes

Molecularly imprinted polymers (MIPs) selective for fluorescein, rhodamine or 2,4-dichlorophenoxyacetic acid (2,4-D) were electropolymerized onto graphite electrodes using an aqueous solution equimolar in resorsinol/ortho-phenylenediamine and in the presence of the template molecule. For the dyes, the MIP-coated electrodes showed higher affinity for their template molecule than for a non-template dye. The 2,4-D-MIP-coated electrode showed a concentration dependent response for 2,4-D as compared to the polymer-coated electrode prepared in the absence of template molecule.     

纳米结构分子印迹聚合物及其在药物分析中的应用进展

纳米材料是纳米技术发展的重要基础,它具有许多传统材料所不具备的独特的理化性质,因此有着广泛的应用前景.分子印迹技术是一种通过模拟抗体-抗原相互作用原理,制备具有分子识别功能的聚合物的技术.以纳米材料制备的分子印迹聚合物具有较高的结合容量,较大的选择性和较快的结合动力学特性,近年来备受关注.本文简单概述了零维、一维、二维纳米结构分子印迹聚合物的合成、表征方法及研究现状,并对其在手性药物分析、临床药物分析、传感器及药物残留检测中的应用进行了综述.     

Electrochemical sensor for 2,4-dichlorophenoxy acetic acid using molecularly imprinted polypyrrole membrane as recognition element

An electrochemical sensor based on molecularly imprinted polypyrrole membranes is reported for the determination of 2,4-dichlorophenoxy acetic acid (2,4-D). The sensor was prepared by electropolymerization of pyrrole on a glassy carbon electrode in the presence of 2,4-D as a template. The template was removed by overoxidation at +1.3 V in buffer solution. The sensor can effectively improve the reductive properties of 2,4-D and eliminate interferences by other pesticides and electroactive species. The peak current at -0.78 V is linear with the concentration of 2,4-D from 1.0 to 10 µM, the detection limit is 0.83 µM (at 3σ), and the relative standard deviation is 3.9% (at 5.0 µM of 2,4-D; n?=?7). The method has been successfully applied to the determination of 2,4-D in environmental water samples, with recovery rates ranging from 92% to 108%.     

Chromatographic characterisation, under highly aqueous conditions, of a molecularly imprinted polymer binding the herbicide 2,4-dichlorophenoxyacetic acid

The affinity of a 2,4-dichlorophenoxyacetic acid (2,4-D) molecularly imprinted polymer (MIP), which was synthesised directly in an aqueous organic solvent, for its template (2,4-D) was studied and compared with the affinity exhibited by two other reference (control) polymers, NIPA and NIPB, for the same analyte. Zonal chromatography was performed to establish the optimal selectivity, expressed as imprinting factor (IF), under chromatographic conditions more aqueous than those described so far in the literature. Frontal analysis (FA) was performed on columns packed with these polymers, using an optimized mobile phase composed of methanol/phosphate buffer (50/50, v/v), to extract adsorption isotherm data and retrieve binding parameters from the best isotherm model. Surprisingly, the template had comparable and strong affinity for both MIP (K = 3.8 × 10⁴ M⁻¹) and NIPA (K = 1.9 × 10⁴ M⁻¹), although there was a marked difference in the saturation capacities of selective and non-selective sites, as one would expect for an imprinted polymer. NIPB acts as a true control polymer in the sense that it has relatively low affinity for the template (K = 8.0 × 10² M⁻¹). This work provides the first frontal chromatographic characterization of such a polymer in a water-rich environment over a wide concentration range. The significance of this work stems from the fact that the chromatographic approach used is generic and can be applied readily to other analytes, but also because there is an increasing demand for well-characterised imprinted materials that function effectively in aqueous media and are thus well-suited for analytical science applications involving, for example, biofluids and environmental water samples.     

Comparison of molecular imprinted particles prepared using precipitation polymerization in water and chloroform for fluorescent detection of nitroaromatics

A comparative study was conducted to study the effects that two different polymerization solvents would have on the properties of imprinted polymer microparticles prepared using precipitation polymerization. Microparticles prepared in chloroform, which previous results indicated was the optimal solvent for molecular imprinting of nitroaromatic explosive compounds, were compared to water, which was hypothesized to decrease water swelling of the polymer and allow enhanced rebinding of aqueous template. The microparticles were characterized and were integrated into a fluorescence sensing mechanism for detection of nitroaromatic explosive compounds. The performance of the sensing mechanisms was compared to illustrate which polymerization solvent produced optimal imprinted polymer microparticles for detection of nitroaromatic molecules. Results indicated that the structures of microparticles synthesized in chloroform versus water varied greatly. Sensor performance studies showed that the microparticles prepared in chloroform had greater imprinting efficiency and higher template rebinding than those prepared in water. For detection of 2,4,6-trinitrotoluene, the chloroform-based fluorescent microparticles achieved a lower limit of detection of 0.1 μM, as compared to 100 μM for the water-based fluorescent microparticles. Detection limits for 2,4-dinitrotoluene, as well as time response studies, also demonstrated that the chloroform-based particles are more effective for detection of nitroaromatic compounds than water-based particles. These results illustrate that the enhanced chemical properties of using the experimentally determined optimal polymerization solvent overcome deformation of imprinted binding sites by water swelling and benefits of using the polymerization solvent for rebinding of the template.     

Use of a bisphenol-A imprinted polymer as a selective sorbent for the determination of phenols and phenoxyacids in honey by liquid chromatography with diode array and tandem mass spectrometric detection

An extraction-preconcentration procedure based on the use of a molecularly imprinted polymer (MIP) as selective sorbent has been developed for the determination of several phenolic compounds (bisphenol-A, bisphenol-F and 4-nitrophenol) and phenoxyacid herbicides (2,4-D, 2,4,5-T and 2,4,5-TP) in honey samples. Liquid chromatography with diode array detection (LC-DAD) and electrospray ionisation-ion trap mass spectrometry (LC-IT-MS) were used for the separation, identification and quantification of these analytes.The molecularly imprinted polymer was obtained by precipitation polymerisation with bisphenol-A (BPA) as template and 4-vinylpyridine as the functional monomer. The behaviour of this sorbent was compared with those of other materials frequently used in SPE. The selectivity of the BPA-MIP for the target analytes was tested in samples containing other pesticides in common use. The recoveries achieved for all six compounds were in the 81-96% range.By applying the proposed procedure prior to LC-IT-MS, the limits of detection achieved in commercial honey samples were in the 0.1-3.8 ng g⁻¹ range, with relative standard deviations of 12-24%.     

A new ionic liquid surface‐imprinted polymer for selective solid‐phase‐extraction and determination of sulfonamides in environmental samples

Toward improving the selective adsorption performance of molecularly imprinted polymers in strong polar solvents, in this work, a new ionic liquid functional monomer, 1‐butyl‐3‐vinylimidazolium bromide, was used to synthesize sulfamethoxazole imprinted polymer in methanol. The resulting molecularly imprinted polymer was characterized by Fourier transform infrared spectra and scanning electron microscopy, and the rebinding mechanism of the molecularly imprinted polymer for sulfonamides was studied. A static equilibrium experiment revealed that the as‐obtained molecularly imprinted polymer had higher molecular recognition for sulfonamides (e.g., sulfamethoxazole, sulfamonomethoxine, and sulfadiazine) in methanol; however, its adsorption of interferent (e.g., diphenylamine, metronidazole, 2,4‐dichlorophenol, and m‐dihydroxybenzene) was quite low. ¹H NMR spectroscopy indicated that the excellent recognition performance of the imprinted polymer was based primarily on hydrogen bond, electrostatic and π‐π interactions. Furthermore, the molecularly imprinted polymer can be employed as a solid phase extraction sorbent to effectively extract sulfamethoxazole from a mixed solution. Combined with high‐performance liquid chromatography analysis, a valid molecularly imprinted polymer‐solid phase extraction protocol was established for extraction and detection of trace sulfamethoxazole in spiked soil and sediment samples, and with a recovery that ranged from 93–107%, and a relative standard deviation of lower than 9.7%.     

基于分子印迹技术的丙溴磷压电石英晶体微天平研制

介绍了一种用于检测丙溴磷农药的分子印迹压电生物传感器的构建方法。采用沉淀聚合法合成了农药丙溴磷的分子印迹聚合物,将其固定于石英晶体微天平电极表面构建传感器;采用环境扫描电镜以及原子力显微镜对聚合物形貌、传感器电极表面形貌特征进行分析,并利用传感器对丙溴磷农药进行检测分析,其质量浓度在10~1000 ng/mL范围内,传感器频率改变与丙溴磷浓度之间的响应呈线性关系,线性方程为y=0.139ρ+2.26(r=0.9984)。结果表明,构建的分子印迹压电生物传感器能够对农药进行初步检测,具有较高的灵敏性和较好的特异识别能力。     

Evaluation of a molecularly imprinted polymer for the isolation/enrichment of β-estradiol

The selective preconcentration of estradiol was explored using the recognition ability of a molecularly imprinted polymer (MIP) in the solid phase extraction (SPE) format. Polymeric particles were imprinted with 17β-estradiol using methacrylic acid as functional monomer and divinylbenzene as crosslinker. Binding studies of these polymeric particles towards 17β-estradiol showed selectivity over non-imprinted polymers, using acetonitrile as solvent. The imprinted polymer showed a recovery of 88% for β-estradiol in deionized water and 81% in surface water. The selectivity of the MIP over the non-imprinted polymer was relatively low, only 10% higher recovery. The results indicate that the MIP imprinted with 17β-estradiol does not appear to provide a viable approach to be used in a sample clean-up or enrichment step for the determination of estradiol in aqueous systems.     

Facile and versatile strategy to prepare magnetic molecularly imprinted particles based on the coassembly of magnetic nanoparticles and amphiphilic random copolymers

Magnetic molecularly imprinted polymer nanoparticles for bisphenol A were prepared by coassembling magnetic nanoparticles and amphiphilic random copolymers. Under optimized conditions, bisphenol A as template molecules, magnetic molecularly imprinted polymer particles with regular morphology, small size, good monodispersity, and high content of OA‐Fe₃O₄ were prepared by the coassembly method using P(MMA‐co‐MAA) with monomer ratio of 9:1. These magnetic molecularly imprinted polymer particles could be rapidly collected by an external magnet within 1 min. The saturated adsorption capacity of the magnetic molecularly imprinted polymer for bisphenol A was 201.5 mg/g, and the imprinting factor was 2.5. The separation factors for bisphenol A to β‐estradiol, estriol, and diethylstilbestrol was 3.1, 2.9, and 3.7, respectively. Unlike assembling amphiphilic copolymer in the selective solvent, the coassembly process was simple and rapid. Therefore, the present work provided a facile and versatile approach to construct magnetic molecularly imprinted polymer nanoparticles under mild conditions.     

Electrochemical sensor based on chlorohemin modified molecularly imprinted microgel for determination of 2,4-dichlorophenol

A newly designed molecularly imprinted polymer (MIP) was synthesized and successfully utilized as a recognition element of an amperometric sensor for 2,4-dichlorophenol (2,4-DCP) detection. The MIP with a well-defined structure could imitate the dehalogenative function of the natural enzyme chloroperoxidase for 2,4-DCP. Imprinted sensor was fabricated in situ on a glassy carbon electrode surface by drop-coating the 2,4-DCP imprinted microgel suspension and chitosan/Nafion mixture. Under optimized conditions, the sensor showed a linear response in the range of 5.0–100 μmol L⁻¹ with a detection limit of 1.6 μmol L⁻¹. Additionally, the imprinted sensor demonstrated higher affinity to target 2,4-DCP over competitive chlorophenolic compounds than non-imprinted sensor. It also exhibited good stability and acceptable repeatability. The proposed sensor could be used for the determination of 2,4-DCP in water samples with the recoveries of 96.2–111.8%, showing a promising potential in practical application.     

Direct patterning of molecularly imprinted microdot arrays for sensors and biochips

We have used fountain pen microlithography to deposit arrays of molecularly imprinted polymer microdots on flat substrates. We visualize analyte binding to the dots by fluorescence microscopy with the aid of fluorescein as a model analyte. Elution and readsorption of the analyte to the MIP dots were possible if the porosity of the dots was improved by a sacrificial polymeric porogen. The imprinting effect was confirmed by using compounds structurally related to fluorescein. In addition, we show with another MIP specific to 2,4-D that, apart from the direct measurement of the binding of fluorescent compounds, a competitive immunoassay-type format can also be used to transduce the binding. We believe that this technique has a strong potential for the fabrication of biomimetic microchips and other types of integrated biosensors.