巴豆醛气相选择性加氢催化剂

巴豆醛是α, β-不饱和醛中最具代表性的一类有机化合物,采用气相催化巴豆醛选择加氢制备巴豆醇符合原子经济和绿色化学要求,具有重要的工业应用和学术价值。本文综述了近十年国内外巴豆醛气相选择性加氢合成巴豆醇的负载型催化剂的研究成果,评述了贵金属催化剂(铂、金、铱、银、钯)和非贵金属催化剂(钴、铜)上巴豆醛选择性加氢性能,分析了活性组分、载体、助剂以及活性组分粒径对催化剂性能的影响,探讨了巴豆醛选择性加氢的反应机理和失活机理。最后,对气相巴豆醛选择性加氢催化剂所存在的问题进行总结,并对催化剂的发展趋势作出了展望。指出了非贵金属催化剂的巴豆醛选择性加氢性能因具有价廉易得等优势,将是该领域的研究方向之一。催化剂失活是巴豆醛气相选择性加氢工业化的最大障碍,因此研究和认识反应机理,解决催化剂失活问题是重点研究方向。     

ZrO_2负载Pt催化巴豆醛选择性加氢

以高比表面积ZrO2为载体,采用浸渍法制备了负载型Pt催化剂,应用于常压下气相巴豆醛加氢反应,考察了Pt负载量和H2还原温度等对巴豆醛选择性加氢性能的影响.实验结果表明,Pt负载量(质量分数)为3%的3Pt/ZrO2催化剂经500℃还原后,具有较高的巴豆醛选择性加氢性能:巴豆醛转化率为27%,巴豆醇的选择性为55%.X射线粉末衍射(XRD)分析,CO化学吸附,NH3程序升温脱附(NH3-TPD)表征结果表明Pt/ZrO2催化剂上Lewis强酸中心和适宜的Pt颗粒(约为8nm)有利于巴豆醛选择性加氢生成巴豆醇.     

用于巴豆醛液相选择性加氢的高性能Ir/TiH_2催化剂

在Ir/TiH_2催化剂上进行了巴豆醛液相选择性加氢反应,并研究催化剂还原温度对其反应行为的影响.相比于Ir/TiO_2催化剂,相同反应条件下Ir/TiH_2催化剂的活性提高了2倍(80℃时巴豆醛转化率为52%),且巴豆醇选择性大幅度提高(78%).表征结果表明,Ir/TiH_2催化剂表面富含的氧缺位和强的H活化能力是催化剂性能提高的主要原因.此外,Ir/TiH_2催化剂中Ir颗粒尺寸随催化剂还原温度的升高而增大,导致其本征活性降低,表现出明显的尺寸效应.较小的颗粒尺寸有利于巴豆醛分子中C=O键加氢,从而提高了催化剂的反应性能.     

TiO_2晶面依赖的Ir-TiO_x相互作用对Ir/TiO_2催化剂巴豆醛选择性加氢性能的影响（英文）

不饱和醇是一类重要的精细化学品,主要通过α,β-不饱和醛选择性加氢获得.由于α,β-不饱和醛分子中含有共轭的C=C键和C=O键,且后者键能更大,在热力学和动力学上均不利于C=O键的选择性加氢生成α,β-不饱和醇.因此,提高α,β-不饱和醛中C=O的加氢选择性是催化领域中一项挑战性的课题.巴豆醛属于典型的α,β-不饱和醛,研究其选择性加氢生成巴豆醇具有广泛的代表意义;Ir负载在具有还原性载体(如TiO_2)上时,表现出很好的C=O加氢选择性,因此,成为近年来的研究热点.由于暴露不同晶面的TiO_2具有不同的形貌和电子结构,因此研究Ir-TiO_2相互作用的晶面依赖性及其对巴豆醛选择性加氢反应的影响具有重要意义.本文以分别暴露{101}、{100}和{001}晶面的锐钛矿TiO_2纳米晶为载体,制备了负载型Ir/TiO_2催化剂,系统研究了催化剂经过不同的预处理过程(在不同温度下H_2还原和O_2再氧化)后对巴豆醛的气相选择性加氢的性能.利用高分辨透射电镜、原位X射线光电子能谱和原位漫反射红外光谱及氨程序升温脱附等技术研究发现,预处理条件显著改变了Ir-TiO_x的相互作用,包括Ir金属的几何、电子性质及催化剂表面酸性.这种相互作用与TiO_2的暴露晶面密切相关,从而改变了不同Ir/TiO_2催化剂上不同加氢反应行为.研究结果表明,经300°C预还原的Ir/TiO_2-{101}催化剂催化性能最好,在80°C下初始反应速率为166.1μmol g-Ir~(-1) s~(-1),巴豆醇的生成转化频率为0.022 s~(-1).与其他催化剂相比,Ir/TiO_2-{101}催化剂表面Ir~0浓度最高,表面酸度适中,因此表现出最佳的催化性能.同时Ir-TiO_x界面在反应中的协同作用,对H_2和巴豆醛分子中C=O键的吸附和活化起到了关键作用.然而当催化剂经过400°C的H_2预还原后,由于产生了强的金属-载体相互作用使得TiO_x对Ir粒子进行了包裹从而导致Ir-TiO_x界面缺失,因而催化剂催化巴豆醛加氢性能降低.本文为理解金属-载体相互作用对巴豆醛选择性加氢反应的影响提供了新的见解,并为设计高性能α,β-不饱和醛选择性加氢催化剂提供了理论依据.     

TiO2晶面依赖的Ir-TiOx相互作用对Ir/TiO2催化剂巴豆醛选择性加氢性能的影响

α,β-不饱和醇是一类重要的精细化学品,主要通过α,β-不饱和醛选择性加氢获得.由于α,β-不饱和醛分子中含有共轭的C=C键和C=O键,且后者键能更大,在热力学和动力学上均不利于C=O键的选择性加氢生成α,β-不饱和醇.因此,提高α,β-不饱和醛中C=O的加氢选择性是催化领域中一项挑战性的课题.巴豆醛属于典型的α,β-不饱和醛,研究其选择性加氢生成巴豆醇具有广泛的代表意义;Ir负载在具有还原性载体(如TiO2)上时,表现出很好的C=O加氢选择性,因此,成为近年来的研究热点.由于暴露不同晶面的TiO2具有不同的形貌和电子结构,因此研究Ir-TiO2相互作用的晶面依赖性及其对巴豆醛选择性加氢反应的影响具有重要意义.本文以分别暴露{101}、{100}和{001}晶面的锐钛矿TiO2纳米晶为载体,制备了负载型Ir/TiO2催化剂,系统研究了催化剂经过不同的预处理过程(在不同温度下H2还原和O2再氧化)后对巴豆醛的气相选择性加氢的性能.利用高分辨透射电镜、原位X射线光电子能谱和原位漫反射红外光谱及氨程序升温脱附等技术研究发现,预处理条件显著改变了Ir-TiOx的相互作用,包括Ir金属的几何、电子性质及催化剂表面酸性.这种相互作用与TiO2的暴露晶面密切相关,从而改变了不同Ir/TiO2催化剂上不同加氢反应行为.研究结果表明,经300℃预还原的Ir/TiO2-{101}催化剂催化性能最好,在80℃下初始反应速率为166.1 μmol g-Ir-1 s-1,巴豆醇的生成转化频率为0.022 s-1.与其他催化剂相比,Ir/TiO2-{101}催化剂表面Ir0浓度最高,表面酸度适中,因此表现出最佳的催化性能.同时Ir-TiOx界面在反应中的协同作用,对H2和巴豆醛分子中C=O键的吸附和活化起到了关键作用.然而当催化剂经过400℃的H2预还原后,由于产生了强的金属-载体相互作用使得TiOx对Ir粒子进行了包裹从而导致Ir-TiOx界面缺失,因而催化剂催化巴豆醛加氢性能降低.本文为理解金属-载体相互作用对巴豆醛选择性加氢反应的影响提供了新的见解,并为设计高性能α,β-不饱和醛选择性加氢催化剂提供了理论依据.     

助剂Fe对Ir/SiO2催化剂的巴豆醛选择性加氢性能的影响

以SiO2为载体采用分步浸渍法制备了Fe/Ir/SiO2催化剂,考察了助剂Fe对Ir/SiO2催化剂气相巴豆醛选择性加氢性能的影响.采用X射线粉末衍射(XRD)、CO化学吸附、H2-程序升温还原(H2-TPR)和拉曼光谱(Raman)等技术对催化剂进行了表征.结果表明,助剂Fe能有效提高Ir/SiO2催化剂的巴豆醛转化率和巴豆醇选择性.Fe含量为0.087%的0.087Fe/Ir/SiO2催化剂的反应性能最佳,反应进行9 h的巴豆醛转化率36.9%,巴豆醇选择性83%.随着催化剂CO吸附量的下降(Fe覆盖的增加),催化剂的转换频率(turn over frequency,TOF)明显增加,这表明Fe促进Ir/SiO2催化剂表面活性位的加氢活性.然而,Fe的掺杂使得Ir/SiO2催化剂存在明显的活性下降现象,归因于Fe导致Ir/SiO2催化剂表面积炭和CO中毒.     

Au/TiO2催化剂制备条件对巴豆醛选择加氢的影响

采用沉积-沉淀法制备了纳米Au/TiO2催化剂, 以X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)等手段对催化剂进行了系统的表征, 并考察了该催化剂在巴豆醛液相加氢制巴豆醇反应中的催化性能. 通过改变活化气氛、负载量和还原温度, 能够调节Au粒子的尺寸及金属与载体间的相互作用. 在673 K还原条件下制备Au质量分数为9.2%的Au/TiO2 催化剂上, Au粒子的平均粒径为2 nm, 初始加氢速率达到13.7×10-5 mol·s-1·g-1, 同时巴豆醇最高收率可达69.9%. 结合表征结果, 该催化剂良好的巴豆醛选择加氢性能归属为载体TiO2在还原条件下产生的氧缺陷位对Au纳米粒子的锚定作用及给电子作用.     

天然高分子锚定的钯加氢催化剂

以天然有机高分子柞蚕丝为载体制备了钯-柞蚕丝催化剂。用XPS,IR,电镜和X射线衍射等方法对钯-柞蚕丝催化剂进行了表征。此催化剂能对多种化合物进行催化加氢,在常温常压下具有很高的活性及稳定性,对巴豆醛加氢经过20次的回收和重复使用,未见活性降低。     

贵金属催化剂上巴豆醛选择性加氢的研究进展

巴豆醛是一种重要的α,β-不饱和醛,其选择性加氢常被用作模型反应用以研究催化剂构效关系.近年来,文献报道了众多贵金属基催化剂上巴豆醛选择性加氢的结果.我们主要从贵金属催化剂角度系统地讨论和总结该反应的最新进展.通过比较催化剂的不同反应行为,进一步明确催化剂性质(如催化剂结构、晶面/界面效应、电子效应和几何效应等)与反应性能之间的关系.并尝试总结和讨论当前研究中所存在的不足与前景,为进一步提高目标产物的收率提供思路.     

CuO/SBA-15催化剂上巴豆醛选择性加氢

通过γ-氨丙基三甲氧基硅烷(APTS)偶联与Cu2 离子络合两步法将CuO负载到介孔分子筛SBA-15上,制得CuO/SBA-15催化剂,考察了催化剂的巴豆醛选择性加氢反应性能.通过X射线粉末衍射、氮气吸脱附和程序升温还原(TPR)技术对催化剂进行了表征.结果表明,SBA-15分子筛负载CuO后保持原有的介孔结构,但是孔容和比面表积随着CuO负载量的增大而下降.TPR结果表明CuO/SBA-15系列催化剂有三种CuO物种:高分散CuO、晶相CuO和进入SBA-15分子筛骨架的Cu2 .高分散CuO物种对巴豆醛加氢反应的催化活性最高,晶相CuO物种次之,而进入SBA-15分子筛骨架的Cu2 物种几乎没有活性.     

Morphological and chemical influences on alumina-supported palladium catalysts active for the gas phase hydrogenation of crotonaldehyde

A series of five alumina-supported palladium catalysts have previously been prepared and characterised by a combination of CO chemisorption and infrared spectroscopy. The reactive attributes of these catalysts are examined using the hydrogenation of crotonaldehyde as a test reaction, using a modified infrared gas cell as a batch reactor. Periodic scanning of the infrared spectrum of the gaseous phase present over the Pd/Al(2)O(3) catalysts was used to construct reaction profiles. Four of the catalysts were able to facilitate a 2-stage hydrogenation process (crotonaldehyde → butanal → butanol), whilst one catalyst was totally selective for the first stage hydrogenation process (crotonaldehyde → butanal). Rate coefficients for the first and second stage hydrogenation processes are normalised to the number of surface palladium atoms for the particular catalyst. Correlation of these kinetic parameters as a function of mean particle size indicates the first stage process to be structure insensitive, whilst the second stage hydrogenation is structure sensitive. Chlorine residues associated with the preparative process of one of the catalysts is seen to selectively poison the second stage hydrogenation process for that catalyst. Structure/activity relationships are considered to explain the observed trends.     

负载型钯催化剂用于不饱和化合物的加氢反应

近十多年来,均相络合催化剂的固载化是一个活跃的研究领域^[1-6],我们在聚合、歧化、加氢等络合催化剂负载化方面的工作^[7-9]。说明负载型络合催化剂中的载体,可以视为一个配体,由于其有不同的化学及空间效应,因此是一个复杂的配体.在环戊二烯选择加氢的研究中,不同载体对加氢反应的活性及选择性的影响,说明载体的性质、结构、分子量及其上基团,对于底物的配位和它在活性物种上的加氢速度常数都有调变作用^[10],本文报道固载化络合催化剂在多种不饱和烃加氢反应中的行为.     

Rh/ZnO-Al2O3催化剂用于巴豆醛选择性加氢（英文）

Gas phase hydrogenation of crotonaldehyde was performed over 1 wt% Rh/ZnO-Al2O3 catalysts with various Zn/Rh atomic ratios. Monometallic Rh/Al2O3 was also prepared for comparison. The samples were prepared by the successive impregnation of Al2O3 with chlo-ride precursors of zinc and rhodium. The solids have been characterized by H2 chemisorption,temperature-programmed reduction,scanning electron microscopy,and cyclohexane dehydrogenation. Their catalytic behaviour in the gas phase crotonaldehyde hydrogenation reaction after reduction treatment in flowing hydrogen at 723 K was investigated. The relationship between catalytic activity,selectivity for crotyl alcohol,and physicochemical properties of the catalysts was examined. Results obtained showed that the presence of Zn clearly promotes the hydrogenation of the carbonyl bond. The catalyst with Zn/Rh atomic ratio of 5 displayed good catalytic stability and the highest selectivity for crotyl alcohol(70%) along with alloy formation.     

Selective Amplification of CO Bond Hydrogenation on Pt/TiO2: Catalytic Reaction and Sum‐Frequency Generation Vibrational Spectroscopy Studies of Crotonaldehyde Hydrogenation

The hydrogenation of crotonaldehyde in the presence of supported platinum nanoparticles was used to determine how the interaction between the metal particles and their support can control catalytic performance. Using gas‐phase catalytic reaction studies and in situ sum‐frequency generation vibrational spectroscopy (SFG) to study Pt/TiO₂ and Pt/SiO₂ catalysts, a unique reaction pathway was identified for Pt/TiO₂, which selectively produces alcohol products. The catalytic and spectroscopic data obtained for the Pt/SiO₂ catalyst shows that SiO₂ has no active role in this reaction. SFG spectra obtained for the Pt/TiO₂ catalyst indicate the presence of a crotyl‐oxy surface intermediate. By adsorption through the aldehyde oxygen atom to an O‐vacancy site on the TiO₂ surface, the C?O bond of crotonaldehyde is activated, by charge transfer, for hydrogenation. This intermediate reacts with spillover H provided by the Pt to produce crotyl alcohol.     

Hydrogenation of crotonaldehyde and cinnamaldehyde catalyzed by water-soluble palladium complex

The selective hydrogenations of crotonaldehyde and cinnamaldehyde in the aqueous-benzene biphasic system were investigated using water-soluble palladium complex PdCl₂(TPPTS)₂ as catalyst. The hydrogenation rate of crotonaldehyde was higher than that of cinnamaldehyde under similar reaction conditions. The palladium complex selectively catalyzed the hydrogenation of CC bond in crotonaldehyde to form butanal (100%). On the contrary, hydrogenation of both CC and CO bonds in cinnamaldehyde occurred simultaneously, with the amount of phenylpropanal only slightly higher than that of phenylpropanol. However, the reduction of CO bond of cinnamaldehyde could be inhibited by the addition of Na₂CO₃ solution. Therefore, high selectivity to form phenylpropanal (91%) could be obtained by using Na₂CO₃ solution at pH 12.2. Other factors affecting the hydrogenation conversion and selectivity of crotonaldehyde and cinnamaldehyde were also discussed.     

Selective hydrogenation of crotonaldehyde over raney cobalt catalysts modified with heteropolyacid salts

RCo-based catalysts were modified with Keggin type heteropolyacid salts, including alkali, alkaline earth and transition metal salts. The selective hydrogenation of crotonaldehyde was investigated over these catalysts. The selectivities to crotyl alcohol can be improved on all modified catalysts. Among them, the catalyst modified with copper salts of 12-molybdophosphates shows the best performance in improving the selectivity. This revised version was published online in June 2006 with corrections to the Cover Date.     

Effect of particle size in the hydrogenation of crotonaldehyde on supported Pt and Pt-Sn catalysts

The present work reports the effect of metal particle size on the selectivity to crotyl alcohol (S_UOL) in the liquid phase hydrogenation of crotonaldehyde over SiO₂ and a-Al₂O₃-supported Pt and Pt-Sn catalysts. It was demonstrated that, for the monometallic catalysts, a higher particle size led to a higher S_UOL, while for the bimetallic catalysts, this effect was not so important.