Iron‐catalyzed radical polymerization of acrylamides in the presence of Lewis acid for simultaneous control of molecular weight and tacticity

This work is directed to the stereospecific living radical polymerization of acrylamides such as N,N‐dimethylacrylamide and N‐isopropylacrylamide with an iron complex and a Lewis acid. DMAM was polymerized with [FeCp(CO)₂]₂ in conjunction with an alkyl iodide [(CH₃)₂C(CO₂Et)I] as an initiator in the presence of Y(OTf)₃ in toluene/methanol (1/1) at 60 °C to be converted almost quantitatively to the polymers with controlled molecular weights and high isotacticity (m > 80%), wherein the Fe‐complex generates radical species from a covalent C? I bond of the dormant species and the Lewis acid controls the stereochemistry of the polymerization via coordination with the amide groups of the polymer terminal and the monomer. A series of Lewis acids were also used for the iron(I)‐catalyzed DMAM polymerization, and Yb(OTf)₃ and Yb(NTf₂)₃ proved effective in giving isotactic polymers without deteriorating the molecular weight control similar to Y(OTf)₃. Furthermore, a slight enhancement of isospecificity was observed for the iron‐catalyzed system in comparison with the α,α‐Azobisisobutyronitrile‐initiated, when coupled with Y(OTf)₃. Stereoblock polymerization of DMAM via a one‐pot reaction was also achieved by just adding the Y(OTf)₃ methanol solution in the course of the polymerization to give atactic‐b‐isotactic poly(DMAM). A similar but slightly lower control in the molecular weight and tacticity was achieved in the polymerization of NIPAM with [FeCp(CO)₂]₂/Y(OTf)₃. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2086–2098, 2006     

Ethylene polymerizations,and the copolymerizations of ethylene with hexene or norbornene with highly active mono(β‐enaminoketonato) vanadium(III) catalysts

Five novel vanadium(III) complexes [PhN = C(R₂)CHC(R₁)O]VCl₂(THF)₂ ( 4a : R₁ = Ph, R₂ = CF₃; 4b : R₁ = t‐Bu, R₂ = CF₃; 4c : R₁ = CF₃, R₂ = CH₃; 4d : R₁ = Ph, R₂ = CH₃; 4e : R₁ = Ph, R₂ = H) have been synthesized and characterized. On activation with Et₂AlCl, all the complexes, in the presence of ethyl trichloroacetate (ETA) as a promoter, are highly active precatalysts for ethylene polymerization, and produce high molecular weight and linear polymers. Catalyst activities more than 16.8 kg PE/mmol_V h bar and weight‐average molecular weights higher than 173 kg/mol were observed under mild conditions. The copolymerizations of ethylene and norbornene or 1‐hexene with the precatalysts were also explored, which leads to high molecular weight copolymers with high comonomer incorporation. Catalyst activity, comonomer incorporation, and polymer molecular weight as well as polydispersity index can be controlled over a wide range by the variation of precatalyst structure and the reaction parameters such as Al/V molar ratio, comonomer feed concentration, and polymerization temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2038–2048, 2008     

Copolymerization of ethylene and cyclopentene with bis(β‐enaminoketonato) titanium complexes

The copolymerizations of ethylene and cyclopentene with bis(β‐enaminoketonato) titanium complexes {[(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂; R₁ = CF₃ and R₂ = CH₃ for 1a , R₁ = Ph and R₂ = CF₃ for 1b ; and R₁ = t‐Bu and R₂ = CF₃ for 1c } activated with modified methylaluminoxane (MMAO) as a cocatalyst were investigated. High‐molecular‐weight copolymers with cis‐1,2‐cyclopentene units were obtained. The catalyst activity, cyclopentene incorporation, polymer molecular weight, and polydispersity could be controlled over a wide range through the variation of the catalyst structure and reaction parameters, such as the Al/Ti molar ratio, cyclopentene feed concentration, and polymerization reaction temperature. The complex 1b /MMAO catalyst system exhibited the characteristics of a quasi‐living ethylene polymerization and an ethylene–cyclopentene copolymerization and allowed the synthesis of polyethylene‐block‐poly(ethylene‐co‐cyclopentene) diblock copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1681–1689, 2005     

Synthesis of polyacetals with various main‐chain structures by the self‐polyaddition of vinyl ethers with a hydroxyl function

To establish the optimum conditions for obtaining high molecular weight polyacetals by the self‐polyaddition of vinyl ethers with a hydroxyl group, we performed the polymerization of 4‐hydroxybutyl vinyl ether (CH₂?CH? O? CH₂CH₂CH₂CH₂? OH) with various acidic catalysts [p‐toluene sulfonic acid monohydrate, p‐toluene sulfonic anhydride (TSAA), pyridinium p‐toluene sulfonate, HCl, and BF₃OEt₂] in different solvents (tetrahydrofuran and toluene) at 0 °C. All the polymerizations proceeded exclusively via the polyaddition mechanism to give polyacetals of the structure [? CH(CH₃)? O? CH₂CH₂CH₂CH₂? O? ]_n quantitatively. The reaction with TSAA in tetrahydrofuran led to the highest molecular weight polymers (number‐average molecular weight = 110,000, weight‐average molecular weight/number‐average molecular weight = 1.59). 2‐Hydroxyethyl vinyl ether, diethylene glycol monovinyl ether, cyclohexane dimethanol monovinyl ether, and tricyclodecane dimethanol monovinyl ether were also employed as monomers, and polyacetals with various main‐chain structures were obtained. This structural variety of the main chain changed the glass‐transition temperature of the polyacetals from approximately ?70 °C to room temperature. These polyacetals were thermally stable but exhibited smooth degradation with a treatment of aqueous acid to give the corresponding diol compounds in quantitative yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4053–4064, 2002     

Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Ethylene/α‐olefin copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Copolymerizations of ethylene with α‐olefins (i.e., 1‐hexene, 1‐octene, allylbenzene, and 4‐phenyl‐1‐butene) using the bis(β‐enaminoketonato) titanium complexes [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = Ph, R₂ = CF₃; and 1c : R₁ = t‐Bu, R₂ = CF₃), activated with modified methylaluminoxane as a cocatalyst, have been investigated. The catalyst activity, comonomer incorporation, and molecular weight, and molecular weight distribution of the polymers produced can be controlled over a wide range by the variation of the catalyst structure, α‐olefin, and reaction parameters such as the comonomer feed concentration. The substituents R₁ and R₂ of the ligands affect considerably both the catalyst activity and comonomer incorporation. Precatalyst 1a exhibits high catalytic activity and produces high‐molecular‐weight copolymers with high α‐olefin insertion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6323–6330, 2005     

Synthesis and chiral recognition ability of optically active poly{N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide} with various tacticities by radical polymerization using Lewis acids

The radical polymerization of an optically active methacrylamide, N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide, was carried out in the absence and presence of Lewis acids such as yittribium trifluoromethanesulfonate [Yb(OTf)₃] and scandium trifluoromethanesulfonate [Sc(OTf)₃]. Catalytic amounts of the Lewis acids significantly affected the stereoregularity of the obtained polymers. The polymerization with Yb(OTf)₃ in tetrahydrofuran afforded isotactic polymers (up to mm = 87%), whereas the conventional radical method without the Lewis acid produced polymers rich in syndiotacticity (up to rr = 88%). The radical polymerization in the presence of MgBr₂ proceeded in a heterotactic‐selective manner (mr = 63%). Thus, the isotactic, syndiotactic, and heterotactic poly(methacrylamide)s were synthesized by the radical processes. The chiral recognition abilities of the obtained optically active poly(methacrylamide)s were affected by the stereoregularity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3354–3360, 2003     

Synthesis of end‐functionalized polymers and copolymers of cyclopentadiene with vinyl ethers by cationic polymerization

A series of cyclopentadiene (CPD)‐based polymers and copolymers were synthesized by a controlled cationic polymerization of CPD. End‐functionalized poly(CPD) was synthesized with the HCl adducts [initiator = CH₃CH(OCH₂CH₂X)Cl; X = Cl ( 2a ), acetate ( 2b ), or methacrylate] of vinyl ethers carrying pendant functional substituents X in conjunction with SnCl₄ (Lewis acid as a catalyst) and n‐Bu₄NCl (as an additive) in dichloromethane at −78 °C. The system led to the controlled cationic polymerizations of CPD to give controlled α‐end‐functionalized poly(CPD)s with almost quantitative attachment of the functional groups (F_n ∼ 1). With the 2a or 2b /SnCl₄/n‐Bu₄NCl initiating systems, diblock copolymers of 2‐chloroethyl vinyl ether (CEVE) and 2‐acetoxyethyl vinyl ether with CPD were also synthesized by the sequential polymerization of CPD and these vinyl ethers. An ABA‐type triblock copolymer of CPD (A) and CEVE (B) was also prepared with a bifunctional initiator. The copolymerization of CPD and CEVE with 2a /SnCl₄/n‐Bu₄NCl afforded random copolymers with controlled molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight = 1.3–1.4). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 398–407, 2001     

Stereocontrol during the free‐radical polymerization of methacrylates with Lewis acids

The free‐radical polymerizations of methyl methacrylate (MMA), ethyl methacrylate, isopropyl methacrylate, and 2‐methoxyethyl methacrylate were carried out in the presence of various Lewis acids. The MMA polymerization in the presence of scandium trifluoromethanesulfonate [Sc(OTf)₃] in toluene or CHCl₃ produced a polymer with a higher isotacticity and heterotacticity than that produced in the absence of Sc(OTf)₃. Similar effects were observed during the polymerization of the other monomers. ScCl₃, Yb(OTf)₃, Er(OTf)₃, HfCl₄, HfBr₄, and In(OTf)₃ also increased the isotacticity and heterotacticity of the polymers. The effects of the Lewis acids were greater in a solvent with a lower polarity and were negligible in tetrahydrofuran and N,N‐dimethylformamide. Sc(OTf)₃ was also found to accelerate the polymerization of MMA. On the basis of an NMR analysis of a mixture of Sc(OTf)₃, MMA, and poly(methyl methacrylate), the monomer–Sc(OTf)₃ interaction seems to be involved in the stereochemical mechanism of the polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1463–1471, 2001     

Cationic polymerization of vinyl ether with a benzoate pendant: The formation of long‐lived polymers and the identification of side reactions

The cationic polymerization of 2‐[4‐(methoxycarbonyl)phenoxy] ethyl vinyl ether, a vinyl ether with a benzoate pendant, was carried out with an HCl/ZnCl₂ initiating system in methylene chloride at −15 °C. The polymerization proceeded with living/long‐lived propagating species to produce polymers with controlled molecular weights and relatively narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ ∼1.4), despite the formation of a small amount of oligomeric products during the polymerization. The structural analysis showed that the lowest molecular weight oligomer had the structure CH₃CH(OCH₂CH₂OC₆H₄COOCH₃)OCH₂CH₂OC₆H₄COOCH₃. The oligomer was formed by the reaction of the monomeric propagating species with the alcohol produced by the side reaction of the active species with water as an impurity during the early stage of polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4362–4372, 2000     

Synthesis of linear and branched polyketones from the Rh complex catalyzed living alternating copolymerization of (4‐alkylphenyl)allene with CO

Copolymerization of (4‐hexylphenyl)allene and of (4‐dodecylphenyl)allene with carbon monoxide (1 atm) catalyzed by Rh[η³‐CH(Ar′)C{C(CHAr′)CH₂C (CHAr′)CH₂CH₂CHCHAr′}CH₂](PPh₃)₂ (A; Ar′ = C₆H₄OMe‐p) gives the corresponding polyketones: I‐[—CO—C(CHAr)—CH₂—]_n [1: Ar = C₆H₄C₆H₁₃‐p, 2 : Ar = C₆H₄C₁₂H₂₅‐p; I = CH₂C(CHAr′)C(CHAr′)CH₂C(CHAr′)CH₂CH₂CHCHAr′]. Molecular weights of the polyketone prepared from (4‐hexylphenyl)allene and CO are similar to the calculated from the monomer to initiator ratios until the molecular weight reaches to 45,000, indicating the living polymerization. Melting points of the polyketones I‐[—CO—C(CHC₆H₄R‐p)—CH₂—]_n (n = ca. 100) increase in the order R = C₁₂H₂₅ < C₆H₁₃ < C₄H₉ < CH₃ < H. Block and random copolymerization of phenylallene and (4‐alkylphenyl)allene with carbon monoxide gives the new copoly‐ ketones. The polymerization of a mixture of (4‐methylphenyl)allene and smaller amounts of bis(allenyl)benzene under CO afforded the polyketone with a crosslinked structure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1505–1511, 2000     

Ethylene polymerization of the new titanium complexes bearing a phosphine oxide‐bridged bisphenolato ligand

A series of novel titanium(IV) complexes combining a phosphine oxide‐bridged bisphenolato ligand TiCl₂{2,2′‐O?P‐R₃ (4‐R₂‐6‐R₁‐C₆H₂O)₂}(THF) ( 6a : R₁ = tBu, R₂ = H, R₃ = Ph; 6b : R₁ = Ph, R₂ = H, R₃ = Ph; 6c : R₁ = R₂ = tBu, R₃ = Ph; 6d : R₁ = R₂ = cumyl, R₃ = Ph; 6e : R₁ = tBu, R₂ = H, R₃ = PhF₅) were prepared by the reaction of corresponding bisphenolato ligands with TiCl₄ in THF. X‐ray analysis reveals that complex 6a adopts distorted octahedral geometry around the titanium center. These catalysts were performed for ethylene polymerization in the presence of modified methyaluminoxane (MMAO). The effects of reaction parameters on ethylene polymerization behaviors, such as cocatalyst concentration, polymerization temperature, and reaction time were studied in detail. In general, these new complexes exhibited high catalytic activity, good temperature tolerance, and long lifetime for ethylene polymerization. The resulting polymers possess high molecular weight, unimodal distribution, and linear structure. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7062–7073, 2008     

Kinetic study on the living/controlled cationic polymerization of p‐methoxystyrene coinitiated by tris(pentafluorophenyl)borane

A kinetic study of the living cationic polymerization of p‐methoxystyrene using 1‐(4‐methoxyphenyl)ethanol ( 1 )/B(C₆F₅)₃ initiating system in a mixture of CH₃CN with CH₂Cl₂ 1:1 (v/v) at room temperature was carried out utilizing a wide variety of conditions. The polymerization proceeded in a living fashion even in the presence of a large amount of water ([H₂O]/[B(C₆F₅)₃] ratio up to 20) to afford polymers whose M_n increased in direct proportion to monomer conversion with fairly narrow MWDs (M_w/M_n ≤ 1.3). The investigation revealed that the rate of polymerization was first‐order in B(C₆F₅)₃ concentration, while a negative order in H₂O concentration close to ?2 was obtained. It was also found that the rate of polymerization decreased with lowering temperature, which could be attributed to a decreased concentration in free Lewis acid, the true coinitiator of polymerization. A mechanistic scheme to explain the kinetic behavior of living p‐methoxystyrene polymerization is proposed, which has been validated by PREDICI simulation on multiple‐data curves obtained by ¹H NMR in situ polymerization experiment. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6928–6939, 2008     

Quasi‐living copolymerization of ethylene with 1‐hexene by heteroligated (salicylaldiminato β‐enaminoketonato) titanium complexes

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH = N(C₆F₅)] [PhN = C(R₁)CHC(R₂)O]TiCl₂ [ 3a : R₁ = CF₃, R₂ = ^tBu; 3b : R₁ = Me, R₂ = CF₃; 3c : R₁ = CF₃, R₂ = Ph; 3d : R₁ = CF₃, R₂ = C₆H₄Ph(p ); 3e : R₁ = CF₃, R₂ = C₆H₄Ph(o ); 3f : R = CF₃, R₂ = C₆H₄Cl(p ); 3g : R₁ = CF₃; R₂ = C₆H₃Cl₂(2,5); 3h : R₁ = CF₃, R₂ = C₆H₄Me(p )] were investigated as catalysts for ethylene (co)polymerization. In the presence of modified methylaluminoxane as a cocatalyst, these complexes showed activities about 50%–1000% and 10%–100% higher than their corresponding bis(β‐enaminoketonato) titanium complexes for ethylene homo‐ and ethylene/1‐hexene copolymerization, respectively. They produced high or moderate molecular weight copolymers with 1‐hexene incorporations about 10%–200% higher than their homoligated counterpart pentafluorinated FI‐Ti complex. Among them, complex 3b displayed the highest activity [2.06 × 10⁶ g/mol_Ti?h], affording copolymers with the highest 1‐hexene incorporations of 34.8 mol% under mild conditions. Moreover, catalyst 3h with electron‐donating group not only exhibited much higher 1‐hexene incorporations (9.0 mol% vs. 3.2 mol%) than pentafluorinated FI‐Ti complex but also generated copolymers with similar narrow molecular weight distributions (M _w/M _n = 1.20–1.26). When the 1‐hexene concentration in the feed was about 2.0 mol/L and the hexene incorporation of resultant polymer was about 9.0 mol%, a quasi‐living copolymerization behavior could be achieved. ¹H and ¹³C NMR spectroscopic analysis of their resulting copolymers demonstrated the possible copolymerization mechanism, which was related with the chain initiation, monomer insertion style, chain transfer and termination during the polymerization process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2787–2797     

Acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzene with molybdenum or ruthenium catalysts: Factors affecting the precise synthesis of defect‐free,high‐molecular‐weight trans‐poly(p‐phenylene vinylene)s

Factors affecting the syntheses of high‐molecular‐weight poly(2,5‐dialkyl‐1,4‐phenylene vinylene) by the acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzenes [alkyl = n‐octyl ( 2 ) and 2‐ethylhexyl ( 3 )] with a molybdenum or ruthenium catalyst were explored. The polymerizations of 2 by Mo(N‐2,6‐Me₂C₆H₃) (CHMe₂ Ph)[OCMe(CF₃)₂]₂ at 25 °C was completed with both a high initial monomer concentration and reduced pressure, affording poly(p‐phenylene vinylene)s with low polydispersity index values (number‐average molecular weight = 3.3–3.65 × 10³ by gel permeation chromatography vs polystyrene standards, weight‐average molecular weight/number‐average molecular weight = 1.1–1.2), but the polymerization of 3 was not completed under the same conditions. The synthesis of structurally regular (all‐trans), defect‐free, high‐molecular‐weight 2‐ethylhexyl substituted poly(p‐phenylene vinylene)s [poly 3 ; degree of monomer repeating unit (DP_n) = ca. 16–70 by ¹H NMR] with unimodal molecular weight distributions (number‐average molecular weight = 8.30–36.3 × 10³ by gel permeation chromatography, weight‐average molecular weight/number‐average molecular weight = 1.6–2.1) and with defined polymer chain ends (as a vinyl group, ? CH?CH₂) was achieved when Ru(CHPh)(Cl)₂(IMesH₂)(PCy₃) or Ru(CH‐2‐OⁱPr‐C₆H₄)(Cl)₂(IMesH₂) [IMesH₂ = 1,3‐bis(2,4,6‐trimethylphenyl)‐2‐imidazolidinylidene] was employed as a catalyst at 50 °C. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6166–6177, 2005     

Synthesis of high molecular weight and narrow molecular weight distribution poly(acrylonitrile) via RAFT polymerization

Well‐defined polyacrylonitrile (PAN) of high viscosity‐average molecular weight (M_η = 405,100 g/mol) was successfully synthesized using reversible addition‐fragmentation chain transfer polymerization. The polymerization exhibits controlled characters: molecular weights of the resultant PANs increasing approximately linearly with monomer conversion and keeping narrow molecular weight distributions. The addition of 0.01 equiv (relative to monomer acrylonitrile) of Lewis acid AlCl₃ in the polymerization system afforded the obtained PAN with an improved isotacticity (by 8%). In addition, the influence of molecular weights and molecular weight distributions of PANs on the morphology of the electrospun fibers was investigated. The results showed that, under the same conditions of electrospinning, average diameter (247–1094 nm) of fibers increased with molecular weights of PANs, and it was much easier to get “uniform” diameter fibers while using PANs with narrow molecular weight distributions as the precursor of electrospinning. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Sn(OTf)2 and Sc(OTf)3: Efficient and versatile catalysts for the controlled polymerization of lactones

A general and novel method for the controlled synthesis of aliphatic polyesters is presented. The evaluation of stannous (II) trifluoromethane sulfonate [Sn(OTf)₂] and scandium (III) trifluoromethane sulfonate [Sc(OTf)₃] as catalysts for the ring‐opening polymerization (ROP) of various lactones is described as a route to polyesters under mild and highly selective polymerization conditions. Size exclusion chromatograms of poly(ϵ‐caprolactone) initiated from ethanol in the presence of either Sn(OTf)₂ or Sc(OTf)₃ demonstrate the facile synthesis of narrowly dispersed products. Predictable molecular weights, typical of a living or controlled polymerization, were obtained with high yields. These catalysts are versatile and applicable toward the ROP of other cyclic (di)esters, including β‐butyrolactone, which produces the synthetic analogue of the biopolymer poly(β‐hydroxybutyrate). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2067–2074, 2000     

Controlled Cationic Polymerization of 1‐Methoxy‐1,3‐Butadiene: Long‐Lived Species‐Mediated Reaction and Control over Microstructure with Weak Lewis Bases

Controlled cationic polymerization of trans‐1‐methoxy‐1,3‐butadiene was achieved through the design of appropriate initiating systems, yielding soluble polymers with controllable molecular weights. The combined use of SnCl₄ or GaCl₃ as a Lewis acid catalyst and a weak Lewis base in conjunction with HCl as a protonogen resulted in efficient and controlled polymerization. The M_n values of the product polymers increased linearly along the theoretical line, which indicates that intermolecular crosslinking reactions negligibly occurred. In addition, the polymer microstructure was critically dependent on the weak Lewis base employed. In particular, the use of tetrahydrofuran as an additive resulted in the highest 4,1/4,3‐structure ratio (96/4). Weak Lewis bases also affected the polymerization rates but exhibited unique trends that differed from their effects on the cationic polymerization of alkyl vinyl ethers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 288–296     

Controlled radical polymerization of 2‐hydroxyethyl methacrylate with a hydrophilic ruthenium complex and the synthesis of amphiphilic random and block copolymers with methyl methacrylate

A hydrophilic ruthenium complex with ionic phosphine ligands { 1 : RuCl₂[P(3‐C₆H₄SO₃Na)(C₆H₅)₂]₂} induced controlled radical polymerization of 2‐hydroxyethyl methacrylate (HEMA) in methanol under homogeneous conditions; the initiator was a chloride (R‐Cl) such as CHCl₂COPh. The number‐average molecular weights of poly(HEMA) increased in direct proportion to monomer conversion, and the molecular weight distributions were relatively narrow (M_w/M_n = 1.4–1.7). A similar living radical polymerization was possible with (MMA)₂‐Cl [(CH₃)₂C(CO₂CH₃)CH₂C(CH₃)(CO₂CH₃)Cl] as an initiator coupled with amine additives such as n‐Bu₃N. In a similar homogeneous system in methanol, methyl methacrylate (MMA) could also be polymerized in living fashion with the R‐Cl/ 1 initiating system. Especially for such hydrophobic polymers, the water‐soluble ruthenium catalyst was readily removed from the polymers by simple washing with an aqueous dilute acid. This system can be applied to the direct synthesis of amphiphilic random and block copolymers of HEMA and MMA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2055–2065, 2002     

Facile,efficient functionalization of polyethylene via regioselective copolymerization of ethylene with cyclic dienes

The copolymerizations of ethylene with cyclic dienes [dicyclopentadiene (DCPD) and 2,5‐norbornadiene (NBD)] using bis(β‐enaminoketonato)titanium complexes [PhN = C(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = t‐Bu, R₂ = CF₃; 1c : R₁ = Ph, R₂ = CF₃) have been investigated. In the presence of modified methylaluminoxane, these complexes exhibited high catalytic activities in the copolymerization of ethylene with DCPD or NBD, affording high molecular weight copolymers with unimodal molecular weight distributions. ¹H and ¹³C‐NMR spectra reveal ethylene/DCPD copolymerizations by catalysts 1a – c proceeds through the enchainment of norbornene ring. Catalysts 1a and 1c showed a tendency to afford alternating copolymers. More noticeably, catalysts 1b and 1c bearing bulky substituents on the ligands promote ethylene/NBD copolymerization without crosslinking, affording the copolymer containing intracyclic double bonds. The NBD incorporation as high as 27.2 mol % has been achieved by catalyst 1c . Moreover, the microstructures of the copolymers were further confirmed by the measurement of reactivity ratios and dyad monomer sequences as well as mean sequence lengths. The intracyclic double bonds of ethylene/DCPD or ethylene/NBD copolymers can be fully converted into polar groups such as epoxy, amine, silane, and hydroxyl groups under mild conditions. Convenient synthesis of hydroxylated polyethylene can be provided for the first time through the ring opening reaction of epoxide. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1764–1772, 2010