Analysis of industrial contaminants in indoor air. Part 2. Emergent contaminants and pesticides

This article reviews recent literature on the analysis of several contaminants related to the industrial development in indoor air in the framework of the REACH project. In this second part, the attention is focused on emergent contaminants and biocides. Among these chemicals, phthalates, polybrominated and phosphate flame retardants, fragrances, pesticides, as well as other emerging pollutants, are increasing their environmental and health concern and are extensively found in indoor air. Some of them are suspected to behave as priority organic pollutants (POPs) and/or endocrine disrupting compounds (EDC), and can be found both in air and associated to the suspended particulate matter (PM) and settled dust. Main literature considered for this review is from the last ten years, reporting analytical developments and applications regarding the considered contaminants in the indoor environment. Sample collection and pretreatment, analyte extraction or desorption, clean-up procedures, determination techniques, and performance results are summarized and discussed.     

High-performance liquid chromatography-UV diode array,inductively coupled plasma mass spectrometry (ICMPS) and orthogonal acceleration time-of-flight mass spectrometry (oa-TOFMS) applied to the simultaneous detection and identification of metabolites of 4-bromoaniline in rat urine

Summary The paper describes the role and tasks of environmental analysis and monitoring. It emphasises the leading role played by gas chromatography, especially when coupled with suitable sample preparation. This is demonstrated by some literature evidence and mainly by the author's original work on the design of sample preparation apparatus and development of GC-based methods of determination of a wide variety of organic pollutants in environmental samples. A typical example is the physical speciation of PAHs and PCBs in river environment with the use of a home-made filtration vessel coupled with SPE cartridges to prepare samples for GC-MS analysis; thin layer head space with self-generation of aqueous concentrate to prepare humane urine samples for DAI (direct aqueous injection)-GC-ECD analysis for the content of volatile chloro-organic compounds; studies on capillary denuders in sampling organic air pollutants; passive dosimeters in indoor air quality measurements; design and application of thermal desorbers for the introduction of analytes into GC columns and modification of a speciation analyser for organometalic environmental pollutants. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Utilisation of certified reference materials in monitoring common environmental pollutants (PAHs, Nitro-PAHs, PCBs)

Summary Monitoring of the concentration levels of certain environmental organic pollutants which pose potential health hazards is examined. The use of reference materials in the quantitative measurement of common pollutants such as polycyclic aromatic hydrocarbons (PAHs), polycyclic heteroaromatic compounds, nitro-polycyclic aromatic hydrocarbons, and polychlorinated biphenyls (PCBs) is reviewed within the context of achieving optimum precision sand accuracy of the measurements.

---

Verwendung zertifizierter Referenzmaterialien bei der Messung von Umweltverunreinigungen (PAHs, Nitro-PAHs, PCBs)

     

室内空气中挥发性有机化合物污染及检测方法

室内空气中挥发性有机污染物的释放严重影响了室内空气质量,本文较详细的叙述了这些有机污染物的来源、种类及处理方法等,并对空气中VOCs的采集和检测方法作以介绍,阐述了不同机制的热解吸仪与气相色谱联用时的优缺点及其应用．     

一种新的有机污染物采样装置

介绍了一种由类脂物和半透膜组成的采样装置,该装置可模拟生物监测可被生物订的有机污染物。将其用于监测大气、水体、沉积物中的多氯联苯（ＰＣＢｓ）、有机氯农药（ＯＣＰ）和多环芳烃（ＰＡＨｓ）时,结果满意。     

Microwave-assisted extraction of organochlorine compounds in marine sediments with organized molecular systems

Summary Analysis of marine sediments is particulary important because they are considered pollution indicators, since they present a view of the spatial distribution of pollutants. The use of microwave energy enables a simple and rapid analysis of different kinds of compounds present in these media. This work shows the results obtained during the optimization process for the application of microwave-assisted extraction methodology (MAE) to the determination of polychlorinated dibenzofurans (PCDFs), present in different marine sediment samples, as well as in mixtures with polychlorinated biphenyls (PCBs), using two non-ionic surfactants (oligoethylene glycol monoalkyl ether and polyoxyethylene 10 lauryl ether) as extractants. After extraction, the organochlorinated compounds are determined by HPLC using fluorescence detection. Recovery rates are compared with those obtained when Soxhlet extraction is used for the same purpose.     

High-energy irradiation of chlorinated hydrocarbons

The Lawrence Livermore National Laboratory (LLNL) and the Idaho National Engineering Laboratory (INEL) are jointly investigating the decomposition of chlorinated hydrocarbons using bremsstrahlung radiation produced by electron accelerators and gamma photons from spent reactor fuel. Experimental results demonstrate an exponential type decay of concentration with dose for volatile organic compounds (VOCs) in ground water and for both polychlorinated biphenyls (PCBs) and insecticides in organic solutions. Experiments were performed at several photon energies and dose rates with various initial concentrations. Mass balance analysis suggests complete mineralization of VOCs in ground water and indicates significant degradation of PCBs and insecticides to VOC type compounds in organic solutions.Work performed under the auspices of the U.S. Department of Energy, DOE Contract Nos. W-7405-ENG-48 and DE-AC07-76IDO1570.     

Standard reference materials (SRMs) for determination of organic contaminants in environmental samples

For the past 25 years the National Institute of Standards and Technology (NIST) has developed certified reference materials (CRMs), known as standard reference materials (SRMs), for determination of organic contaminants in environmental matrices. Assignment of certified concentrations has usually been based on combining results from two or more independent analytical methods. The first-generation environmental-matrix SRMs were issued with certified concentrations for a limited number (5 to 10) of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Improvements in the analytical certification approach significantly expanded the number and classes of contaminants determined. Environmental-matrix SRMs currently available include air and diesel particulate matter, coal tar, marine and river sediment, mussel tissue, fish oil and tissue, and human serum, with concentrations typically assigned for 50 to 90 organic contaminants, for example PAHs, nitro-substituted PAHs, PCBs, chlorinated pesticides, and polybrominated diphenyl ethers (PBDEs). Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Low-temperature plasma ionization source for the online detection of indoor volatile organic compounds

A simple-structure, low-power, and low-cost low temperature plasma (LTP) ionization source, coupled with mass spectrometry, for the online detection of indoor volatile organic compounds (VOCs) has been constructed in this work. Air, instead of noble gases, was employed as the discharging and carrier gas. And a custom-built AC high-voltage power supply with a total power consumption of 5 W, frequency of 2-4 kHz, and amplitude around 1-5 kV_p-p was used. This LTP source is a soft ionization source. The initial performance of the ionization source has been evaluated by ionizing samples including alcohols, ketones, aldehydes and aromatics. These compounds cover most of the common air pollutants concerning people's health. It is well known that those plasmas generated by dielectric barrier discharge (DBD) produce significant amount of metastable species and electrons with mean energies greater than several electronvolt, but minimal fragmentation was observed in our work. Protonated ions are the dominant product for the VOCs detected after the ionization process. Further work has been conducted to confirm the detection feature of this source. The results are promising enough to ensure the novel LTP ionization source as an effective tool for the online detection of indoor VOCs.     

Dry ice-originated supercritical and liquid carbon dioxide extraction of organic pollutants from environmental samples

Packed in a high-pressure vessel and under calculated conditions, dry ice can be used as a source of carbon dioxide for supercritical CO₂ extraction or liquid CO₂ of organic compounds from environmental samples. Coupled with a fluid modifier such as toluene, dry ice-originated supercritical CO₂ (Sc CO₂) achieves quantitative extraction of many volatile organic compounds (VOCs) and semivolatile organic compounds (SOCs) including polycyclic aromatic hydrocarbons (PAHs), n-alkanes, and polychlorinated biphenyls (PCBs) from solid matrices. Compared to contemporary manual or automated supercritical fluid extraction (SFE) technologies, this novel technique simplifies SFE to a minimum requirement by eliminating the need of a high-pressure pump and any electrical peripherals associated with it. This technique is highly suitable to analytical areas where sample preservation is essential but difficult in the sampling field, or where sample collection, sample preparation, and analysis are to be done in the field.     

Novel sample preparation technique with needle-type micro-extraction device for volatile organic compounds in indoor air samples

A novel needle-type sample preparation device was developed for the effective preconcentration of volatile organic compounds (VOCs) in indoor air before gas chromatography–mass spectrometry (GC–MS) analysis. To develop a device for extracting a wide range of VOCs typically found in indoor air, several types of particulate sorbents were tested as the extraction medium in the needle-type extraction device. To determine the content of these VOCs, air samples were collected for 30 min with the packed sorbent(s) in the extraction needle, and the extracted VOCs were thermally desorbed in a GC injection port by the direct insertion of the needle. A double-bed sorbent consisting of a needle packed with divinylbenzene and activated carbon particles exhibited excellent extraction and desorption performance and adequate extraction capacity for all the investigated VOCs. The results also clearly demonstrated that the proposed sample preparation method is a more rapid, simpler extraction/desorption technique than traditional sample preparation methods.     

Determination of volatile organic compounds in industrial wastewater plant air emissions by multi-sorbent adsorption and thermal desorption-gas chromatography-mass spectrometry

This paper describes the process of determining the presence of volatile organic compounds in air emissions from industrial wastewater treatment plants (WWTP). The analytical method, based on thermal desorption-gas chromatography-mass spectrometry, was developed to simultaneously determine of 99 volatile organic compounds (VOCs) in air samples. This method is rapid, environmentally-friendly (since no organic solvents are used to extract the analytes) and compatible with a large range of thermally stable polar and apolar compounds. The target VOCs were selected on the basis of their occurrence in real samples and their adverse effects on the environment and human health. To cover the wide range of target compounds, multisorbent tubes filled with Tenax TA and Carbograph 1TD were used. Method validation showed good repeatabilities, low detection limits, a high linear range and good recoveries. At a fixed sample volume of 600?mL no significant losses for any of the target compounds were found in the samples. Stability during storage indicated that samples must be keep refrigerated at 4°C and analysed within three days of collection. Real samples were taken from air emissions of an industrial wastewater treatment plant located in the Southern Industrial Area of Tarragona (Spain) with the aim of studying its contribution as a source of atmospheric VOCs. This WWTP collects wastewater from several chemical factories which produce isocyanates, polyurethanes, chlorinated organics and functional chemicals among other products. Samples from the collecting tank after the primary sedimentation showed higher VOC concentrations than samples from the secondary treatment tank. The most abundant VOCs found in these emissions are included in the USEPA List of Hazardous Air Pollutants. The highest values correspond to acrylonitrile (up to 1843?µg?m^?3) and styrene (up to 573.70?µg?m^?3). The levels of chloroform, 1,4-dioxane, ethylbenzene, 1,2,3-trimethylbenzene and 1,4-diethylbenzene were also high.     

Photochromism-based detection of volatile organic compounds by W-doped TiO2 nanofibers

W-doped TiO(2) nanofibers with various compositions (W/Ti: 2-8%) were fabricated by the electrospinning method from respective precursor solutions containing tungsten(V) pentaethoxide, titanium tetraisopropoxide (TTIP), and polyvinylpyrrolidone (PVP), followed with calcination at 550 °C. Morphological and structural characteristics of these nanofibers were studied with SEM, XRD and XPS. W-doping inhibited the crystal growth and anatase-to-rutile transformation of TiO(2) nanofibers. W-doped TiO(2) nanofiber mats showed good photocatalytic oxidation abilities for acetone. Obvious color change from white to blue of mats during the photocatalysis process can be detected by naked eyes, which provides a good way in detection of pollutants in indoor air, especially for the volatile organic compounds (VOCs).     

Microanalysis of Volatile Organic Compounds (VOCs) in Water Samples – Methods and Instruments

Volatile organic compounds (VOCs), due to their toxicity and persistence in the environment, are particularly important pollutants. Some of these compounds are mutagens, teratogens or carcinogens, while others are responsible for the degradation of organoleptic parameters such as taste and odour of water. This review focuses on a number of key procedural steps in the analysis of volatile organic compounds (VOCs) in water samples. A wide spectrum of techniques for the isolation and preconcentration of the aforementioned pollutants for trace organic analysis by gas chromatography are presented and discussed. The advantages and disadvantages of these techniques are discussed and novel developments are also taken into consideration.     

The Importance of Long and Short-Term Air-Soil Exchanges of Organic Contaminants

Abstract

Retrospective analysis of archived soil samples collected and stored from long-term agricultural experiments in the UK has shown how soil organic chemical composition has changed over time. High molecular weight polycyclic aromatic hydrocarbons (e.g. benzo[a]pyrene) and polychlorinated dibenzo-p-dioxins and -furans have increased in concentration through this century as a result of cumulative atmospheric depositional inputs. Concentrations of polychlorinated biphenyls and low molecular weight hydrocarbons (e.g. phenanthrene) peaked in the late 1960s/early 1970s, but have declined subsequently. This reflects declining atmospheric inputs of these compounds and losses from surface soils by volatilisation back to the atmosphere and biodegradation. PCBs and low molecular weight PAHs exist predominantly in the vapour phase in air, whilst heavy PAHs and PCDD/Fs are predominantly particulate-bound. Outgassing from soils is probably the most important contemporary source of PCBs to the atmosphere in the UK. Future UK PCB air concentrations will presumably therefore be influenced (controlled) by the rate of desorption and outgassing, as soil and air concentrations move towards a condition of equilibrium partitioning. Archived soils collected and stored before the commercial manufacture of PCBs contain no PCBs indicating that there is no ‘natural production’ of these compounds. However, within a few hours of exposure to contemporary air these samples contain detectable quantities of PCBs. Short-term air-soil exchange, such as during soil drying in the laboratory, can lead to contamination of samples which contain low concentrations of PCBs and loss from samples which contain high concentrations.     

Passive sampling application to control air quality in interior of new vehicles

The investigation of air pollution is a highly important field of research. Air quality in a vehicle’s interior has attracted growing attention since people spend much of their time in vehicles and those frequently travelling in new cars are exposed to harmful compounds. The main air pollutants inside new vehicles are volatile organic compounds (VOCs), present as a result of interior materials’ de-gassing. Among the sampling methods used in indoor air quality research, active sampling for VOCs collection is one method that has been extensively described and applied. The present study sought to implement passive sampling with Radiello® samplers to collect air samples directly in the car factory. The results from passive sampling were compared with results derived from active sampling using Carbograph 1TD and silicagel coated with 2,4-dinitrophenylhydrazine cartridges, based on previously validated methods. The identification and quantification of organic compounds was performed using gas chromatography with flame ionisation coupled with a mass spectrometer after thermal desorption. Aldehydes were determined by means of high-performance liquid chromatography. In the present study, the results obtained with the use of active and passive methods of air sampling were compared, correlations between the two sampling methods were designated and the repeatability of passive sampling was detailed.     

Analysis of volatile organic compounds in indoor environments using thermal desorption with comprehensive two‐dimensional gas chromatography and high‐resolution time‐of‐flight mass spectrometry

Building‐related health effects are frequently observed. Several factors have been listed as possible causes including temperature, humidity, light conditions, presence of particulate matter, and microorganisms or volatile organic compounds. To be able to link exposure to specific volatile organic compounds to building‐related health effects, powerful and comprehensive analytical methods are required. For this purpose, we developed an active air sampling method that utilizes dual‐bed tubes loaded with TENAX‐TA and Carboxen‐1000 adsorbents to sample two parallel air samples of 4 L each. For the comprehensive volatile organic compounds analysis, an automated thermal desorption comprehensive two‐dimensional gas chromatography high‐resolution time‐of‐flight mass spectrometry method was developed and used. It allowed targeted analysis of approximately 90 known volatile organic compounds with relative standard deviations below 25% for the vast majority of target volatile organic compounds. It also allowed semiquantification (no matching standards) of numerous nontarget air contaminants using the same data set. The nontarget analysis workflow included peak finding, background elimination, feature alignment, detection frequency filtering, and tentative identification. Application of the workflow to air samples from 68 indoor environments at a large hospital complex resulted in a comprehensive volatile organic compound characterization, including 178 single compounds and 13 hydrocarbon groups.     

Simultaneous microwave-assisted extraction of polycyclic aromatic hydrocarbons, polychlorinated biphenyls, phthalate esters and nonylphenols in sediments

A new method was developed for the simultaneous extraction of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phthalate esters (PEs), nonylphenols (NPs) and nonylphenol mono- and diethoxylates (NP1EOs and NP2EOs, respectively) in sediment samples by means of a closed microwave system. The extractions were carried out at 21 psi and 80% of microwave power and 15 ml of acetone were used as the common extraction solvent. The filtered extract was further fractionated in two groups using Florisil cartridges: PAHs and PCBs were eluted with n-hexane:toluene (4:1) and the PEs, NPs and ethoxylates were eluted with ethyl acetate. All the compounds were analysed by gas chromatography-mass spectrometry (GC-MS). In case of PAHs and PCBs, the developed method was validated by comparison of the results obtained for the certified reference material NIST 1944 with the certified values. In the absence of a reference material for phthalate esters and nonylphenols, one sediment sample was extracted twice under the optimal conditions in order to check than an exhaustive extraction of the analytes occurred. This method is currently used in the study of the distribution of those organic contaminants in the estuaries of the Bay of Biscay (Spain).     

Photocatalytic degradation of volatile organic compounds using nanocomposite of P-type and N-type transition metal semiconductors

Journal of Sol-Gel Science and Technology - Volatile organic compounds (VOCs) are the main causes of poor indoor quality. It has been reported that the presence of VOCs in an indoor environment...