Analysis of industrial contaminants in indoor air: Part 1. Volatile organic compounds,carbonyl compounds,polycyclic aromatic hydrocarbons and polychlorinated biphenyls

This article reviews recent literature on the analysis of industrial contaminants in indoor air in the framework of the REACH project, which is mainly intended to improve protection of human health and the environment from the risks of more than 34 millions of chemical substances. Industrial pollutants that can be found in indoor air may be of very different types and origin, belonging to the volatile organic compounds (VOCs) and semivolatile organic compounds (SVOCs) categories. Several compounds have been classified into the priority organic pollutants (POPs) class such as polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins and furans (PCDD/PCDFs) and related polychlorinated compounds, and polycyclic aromatic hydrocarbons (PAHs). Many of these compounds are partially associated to the air gas phase, but also to the suspended particulate matter. Furthermore, settled dust can act as a concentrator for the less volatile pollutants and has become a matrix of great concern for indoors contamination. Main literature considered in this review are papers from the last 10 years reporting analytical developments and applications regarding VOCs, aldehydes and other carbonyls, PCBs, PCDDs, PCDFs, and PAHs in the indoor environment. Sample collection and pretreatment, analyte extraction, clean-up procedures, determination techniques, performance results, as well as compound concentrations in indoor samples, are summarized and discussed. Emergent contaminants and pesticides related to the industrial development that can be found in indoor air are reviewed in a second part in this volume.     

The trapping of indoor air contaminants

The removal of indoor air contaminants by reactivity with air filters coated with reagents has been found to be effective for aldehydes, acidic and basic vapours as well as isocyanates Coatings of polymeric amines were used for formaldehyde trapping as well as for the removal of acidic vapours and for the removal of isocyanates. The addition of glycerol as a plasticizer for the coating can also be an effective reagent.     

Microplastics and associated emerging contaminants in the environment: Analysis,sorption mechanisms and effects of co-exposure

Microplastics (MPs) and other emerging pollutants exist together in the environment and their co-exposure represents a source of increasing concern as MPs have been reported to act as carriers of pollutants due to their high sorption capacity. The ingestion of contaminated MPs by organisms can enhance the desorption of pollutants, increasing their bioavailability and toxicity. This review examines the role of MPs as vectors of environmental emerging contaminants. First, the main tools used to identify and characterise MPs and the analytical methods used for the determination of associated emerging contaminants are discussed. Insightful explanations of the sorption interaction between several groups of emerging pollutants and MPs are provided. MP type (polarity, crystallinity, size) and aging process together with the environmental conditions and pollutant properties (hydrophobicity and dissociated forms) are key factors influencing the sorption process. The literature review showed that polyethylene and polystyrene were the most commonly studied polymers. Antibiotics, perfluoroalkyl compounds and triclosan showed high sorption capacities onto MPs. Finally, the effect of co-exposure to MPs-emerging pollutants and bioaccumulation in aquatic and terrestrial organisms is discussed. The combined exposure may impact the toxic effects in different ways, through synergistic or antagonic interactions. Examples of different scenarios are provided, but in general the research conducted on terrestrial systems is scarce. The results revealed a lack of standardization in laboratory studies and in the testing conditions that reflect actual environmental exposure.     

Biosensors for environmental pollutants and food contaminants

This review article provides an overview of the most recent literature on biosensors for environmental pollutants and food contaminants. Due to the large number of publications, only papers published between 2000 and January 2003 were considered. Also, while not all of the published literature could be reviewed here, over 200 references are cited to provide a good overview of research undertaken in the last two years. Older publications are covered by a number of earlier review articles. This article provides an introduction into the field including specific consideration of the application areas, describes the typical biosensor assay format used, and is subsequently structured according to the biorecognition elements used (i.e., nucleic acids, enzymes, whole cells, tissue and whole organisms, antibodies and receptors, and biomimetic materials). In addition, a section on microbiosensing systems is provided. Since only very few microbiosensors with applications in environmental and food systems have been published, enabling technology is also covered in this article.Abbreviations BOD biological oxygen demand - cfu colony forming units - DNP dinitrophenol - GFP green fluorescent protein - NASBA nucleic acid sequence-based amplification - PCR polymerase chain reaction - ppt parts per trillion - QCM quartz crystal microbalance - SPR surface plasmon resonance     

Current challenges in compound-specific stable isotope analysis of environmental organic contaminants

Compound-specific stable-isotope analysis (CSIA) has greatly facilitated assessment of sources and transformation processes of organic pollutants. Multielement isotope analysis is one of the most promising applications of CSIA because it even enables distinction of different transformation pathways. This review introduces the essential features of continuous-flow isotope-ratio mass spectrometry (IRMS) and highlights current challenges in environmental analysis as exemplified for the isotopes of nitrogen, hydrogen, chlorine, and oxygen. Strategies and recent advances to enable isotopic measurements of polar contaminants, for example pesticides or pharmaceuticals, are discussed with special emphasis on possible solutions for analysis of low concentrations of contaminants in environmental matrices. Finally, we discuss different levels of calibration and referencing and point out the urgent need for compound-specific isotope standards for gas chromatography-isotope-ratio mass spectrometry (GC-IRMS) of organic pollutants.     

催化氧化去除室内化学污染物的研究进展

近年来,大量含有有害物质的建筑和装饰材料的使用,使得室内空气化学污染日趋严重,直接威胁人们的身体健康。本文综述了消除室内化学污染的热点处理技术,以及国内外采用催化氧化技术治理室内污染物的研究成果,同时介绍了催化氧化在不同污染物治理过程中的反应机理,并对今后催化氧化去除室内污染物的研究提出几点建议。     

A review of electrochemical reduction processes to treat oxidized contaminants in water

The purpose of this review is to provide a short overview of electrochemical reduction processes for oxidized contaminants in water. The major parameters affecting the electroreduction mechanisms and the impact of electrode choice are discussed with reference to both inorganic and organic pollutants that are either regulated or emerging (e.g., nonmetal oxyanions, perfluoroalkyl and polyfluoroalkyl substances). To conclude, a discussion is presented on the future directions and challenges that must be addressed to develop these electrochemical reduction processes at a larger, commercialized scale.     

Organic pollutants adsorbed on microplastics: Analytical methodologies and occurrence in oceans

The massive use of plastics in several products has generated microplastic debris worldwide. Besides their negative effect on marine organisms by ingestion, microplastics are a contamination vector due to their capacity to transport organic pollutants around our planet. To evaluate the magnitude of this issue, it is necessary to know what kinds of contaminants are adsorbed on microplastics, as well as their concentrations. In order to assess the adsorption and desorption of pollutants from microplastics, effective and reliable extraction procedures are required. In this overview, literature reports, in which extraction, separation and determination methods have been applied to analyse the organic pollutants adsorbed on microplastics, are revised and discussed. Furthermore, the worldwide occurrence of organic compounds found on microplastics in oceans is reviewed and the results obtained from different geographical areas and their global distribution trends are compared. Priority organic pollutants, such as polycyclic aromatic hydrocarbons, hexachlorocyclohexanes, polychlorinated benzenes, perfluoroalkyl substances or bisphenol analogues, have been widely found on microplastic samples. Future research that focuses on different kinds of emerging pollutants is required.     

Screening and identification of unknown contaminants in water with liquid chromatography and quadrupole-orthogonal acceleration-time-of-flight tandem mass spectrometry

In order to assess and maintain the quality of surface waters, target compound monitoring is often not sufficient. Many unknown micro-contaminants are present in water, originating in municipal, industrial or agricultural effluents. Some of these might pose a risk to drinking water production and consequently to human health. The possibilities of screening surface water and identification of these non-target water pollutants with modern data acquisition possibilities of hybrid quadrupole-orthogonal acceleration time of flight mass spectrometers (Q-TOF), such as data-dependent MS to MS/MS switching were investigated. Using model compounds, a procedure for the liquid chromatography-tandem mass spectrometry (LC-MS/MS) screening of water extracts was developed, enabling the detection and identification of compounds at levels < or = 0.25 microg/l in surface water. Based on the accurate mass the elemental compositions for the precursor and product ions are calculated. The calculated chemical formulae are searched against the Merck index, the NIST library, an own database containing about 2,500 water pollutants (pesticides and other contaminants) as well as a CI-CID library containing tandem MS spectra of about 100 water contaminants. The developed approach was applied for the identification of unknown compounds, present in native surface water extract. For three of these compounds, structures were proposed. Confirmation of the proposed structures with standards was beyond the scope of this study.     

室内空气测量不确定度评定进展

介绍了测量不确定度的研究进展及《民用建筑工程室内环境污染控制规范》(GB 50325-2001)中规定的室内5种空气污染物氡、甲醛、氨、苯、TVOC检测不确定度的评定概况,室内空气污染物测量不确定度的评定还处于较低水平,有待系统研究。     

Urban air pollutants and their micro effects on medieval stained glass windows

Levels of urban gaseous and particulate pollutants were investigated in the Cathedral of Cologne, Germany in the framework of the EU-project “VIDRIO”. The purpose of this study was to evaluate the influence of a protective double glazing system on the preservation of ancient stained glass windows by sampling at protected and unprotected windows (indoors, in the interspace and outdoor of the Cathedral). The interspace between the ancient stained glass window and the protective glazing is flushed in the Cathedral by indoor air, hence isolating the historic glass from the outdoor air and exposing it to indoor air on both sides of the glass panels. Concentrations of aggressive gaseous pollutants such as NO₂, SO₂, O₃ and CO₂ as well as elemental concentrations of bulk particles and relative abundances of single particles were surveyed at all sampling locations. Elemental concentrations in bulk particulate matter were found to be significantly lower inside the Cathedral in comparison to the outdoor air. This result is advantageous for the stained glass windows. Single particle analysis of the samples from Cologne showed also soil dust and organic particles as well as sulphates and nitrates, from which the latter two compounds are dangerous for the stained glass windows. On the base of the obtained results, it can be concluded that the protective glazing system in the Cathedral of Cologne can be considered as predominantly advantageous from both the gases' point of view (except for NO₂-candles burning) and from the particles' point of view.     

Non-target screening of organic contaminants in marine salts by gas chromatography coupled to high-resolution time-of-flight mass spectrometry

Gas chromatography coupled to time-of-flight mass spectrometry (GC-TOF MS) has been applied to characterize the organic pollution pattern of marine salt samples collected in saltworks from the Spanish Mediterranean coast. After dissolving the samples in water, a solid-phase extraction was applied reaching with a 250-preconcentration factor. The screening methodology allowed the detection of sample components without any kind of pre-selection of target pollutants. The identity of components detected was established by accurate mass measurements and comparison of experimental full-acquisition spectra with theoretical MS libraries. Several organic pollutants were identified in the samples, like plasticizers - potentially toxic to humans - and fragrances -included within the group of pharmaceuticals and personal care products-, among others. Our results indicate that these contaminants can be found in the marine salt after the crystallization process. GC-TOF MS is a powerful technique for wide-scope screening of (semi)volatile, low-polar organic contaminants, able to investigate the presence of a large number of compounds. Searching of contaminants is not restricted to a target list of compounds. Therefore, unexpected contaminants can be discovered in an efficient way, with better sensitivity and selectivity than other conventional analytical techniques, and making use of the powerful qualitative information provided by full-spectrum acquisition at accurate mass.     

Development of a method based on sorbent trapping followed by solid-phase microextraction for the determination of synthetic musks in indoor air

Synthetic musks are extensively used as fragrance components in a wide range of consumer and personal care products such as detergents, shampoos, perfumes and other cosmetic products. Amongst them, galaxolide and tonalide have become ubiquitous pollutants due to their continuous releasing into the environment. Because of their nature as artificial fragrances, inhalation should be considered as an important exposure pathway, especially in indoor environments. However, up to now very few studies have been carried out to determine these emergent pollutants indoors. In this work, a simple and highly sensitive methodology for the analysis of synthetic musk fragrances in indoor air samples is presented. The proposed methodology combines solid-phase extraction (SPE) and solid-phase microextraction (SPME), followed by gas chromatography-mass spectrometry (GC/MS). To the best of our knowledge, this is the first method based on SPME for the analysis of musks in air. By active sampling, musks present in air were adsorbed onto 25mg Tenax and then transferred to a SPME fiber in the headspace mode (HS). An experimental design strategy was used to optimize main factors potentially affecting the microextraction process such as fiber coating, temperature and the addition of a microvolume of organic solvent to the solid sorbent prior to SPME. Breakthrough of the SPE sorbent was studied from 1 to 10m(3) without significant losses. Recovery studies were performed at two concentration levels (2 and 20ngm(-3)), obtaining quantitative recoveries (>/=85%) by external calibration. A comprehensive study was performed in order to estimate the limits of detection taking into account the contamination risks and laboratory blanks. Values at the sub ngm(-3) level were achieved for all the target compounds sampling 5m(3) air. External calibration, not requiring the complete sampling process, demonstrated to be suitable for the quantification of all musk compounds. Finally, several indoor environments were analyzed using the proposed method.     

Industrial contaminants in Antarctic biota

A critical review of the levels and patterns of industrial contaminants in biota from Antarctica and the Southern Ocean revealed that concentrations are low with respect to other regions of the world, although in some specimens/species (e.g. leopard seal, some invertebrates) they are occasionally high and comparable to those found in regions with a strong human impact; the highest levels of persistent organic pollutants (POPs) were detected in the vicinity of scientific stations. Bioconcentration prevails at the lower trophic levels of pelagic food webs, while biomagnification can become the main route of contamination at higher levels. In a benthic food web, biomagnification poses a major risk for organisms that accumulate lipids to overwinter, compared to those that accumulate glycogen. Hexachlorobenzene, DDTs and chlordanes showed similar concentrations and patterns in the 1980s-1990s period in organisms from Western and Eastern Antarctica, while the polychlorinated biphenyls time trend was different in a variety of species from the two regions.     

Characteristics of petroleum contaminants and their distribution in Lake Taihu, China

ABSTRACT: BACKGROUND: Taihu Lake is a typical plain eutrophic shallow lake. With rapidly economic development of the lake area, the petroleum products and oil wastewater produced in various processes have been inevitably discharged into Taihu Lake. As the major fresh water resource in the economically developed region of Yangtze River Delta, the water quality and environmental condition of Taihu Lake have the direct bearing on the natural environment and sustainable development of economy in this region. For this reason we carried out the study to explore the composition, distribution characteristics and sources of petroleum contaminants in Taihu Lake. The aim of this study was to provide the basis for standard management and pollution control of the Taihu Lake environment. RESULTS: The result showed that water samples from near industrial locations were of relatively higher petroleum contaminants concentrations. The oil pollutants concentrations in different areas of Lake Taihu ranged from 0.106 mg/L to 1.168 mg/L, and the sequence of total contents distribution characteristics of petroleum pollutants from high to low in different regions of Taihu Lake was: "Dapu", "Xiaomeikou", "Zhushan Bay", "Lake center", "Qidu". The results showed that total concentrations of n-alkanes and PAHs ranged from 0.045 to 0.281 mg/L and from 0.011 to 0.034 mg/L respectively. In the same region, the concentrations of hydrocarbon pollutants in the surface and bottom of the lake were higher than that in the middle. CONCLUSION: This paper reached a conclusion that the petroleum contaminants in Taihu Lake mainly derived from petroleum pollution caused by human activities as indicated by OEP, bimodal distribution, CPI, Pr/Ph ratio, the LMW/HMW ratio and other evaluation indices for sources of n-alkanes and polycyclic aromatic hydrocarbons (PAHs).     

Challenges and trends in the determination of selected chemical contaminants and allergens in food

This article covers challenges and trends in the determination of some major food chemical contaminants and allergens, which-among others-are being monitored by Health Canada's Food Directorate and for which background levels in food and human exposure are being analyzed and calculated. Eleven different contaminants/contaminant groups and allergens have been selected for detailed discussion in this paper. They occur in foods as a result of: use as a food additive or ingredient; processing-induced reactions; food packaging migration; deliberate adulteration; and/or presence as a chemical contaminant or natural toxin in the environment. Examples include acrylamide as a food-processing-induced contaminant, bisphenol A as a food packaging-derived chemical, melamine and related compounds as food adulterants and persistent organic pollutants, and perchlorate as an environmental contaminant. Ochratoxin A, fumonisins, and paralytic shellfish poisoning toxins are examples of naturally occurring toxins whereas sulfites, peanuts, and milk exemplify common allergenic food additives/ingredients. To deal with the increasing number of sample matrices and analytes of interest, two analytical approaches have become increasingly prevalent. The first has been the development of rapid screening methods for a variety of analytes based on immunochemical techniques, utilizing ELISA or surface plasmon resonance technology. The second is the development of highly sophisticated multi-analyte methods based on liquid chromatography coupled with multiple-stage mass spectrometry for identification and simultaneous quantification of a wide range of contaminants, often with much less requirement for tedious cleanup procedures. Whereas rapid screening methods enable testing of large numbers of samples, the multi analyte mass spectrometric methods enable full quantification with confirmation of the analytes of interest. Both approaches are useful when gathering surveillance data to determine occurrence and background levels of both recognized and newly identified contaminants in foods in order to estimate human daily intake for health risk assessment.     

Standard reference materials (SRMs) for determination of organic contaminants in environmental samples

For the past 25 years the National Institute of Standards and Technology (NIST) has developed certified reference materials (CRMs), known as standard reference materials (SRMs), for determination of organic contaminants in environmental matrices. Assignment of certified concentrations has usually been based on combining results from two or more independent analytical methods. The first-generation environmental-matrix SRMs were issued with certified concentrations for a limited number (5 to 10) of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Improvements in the analytical certification approach significantly expanded the number and classes of contaminants determined. Environmental-matrix SRMs currently available include air and diesel particulate matter, coal tar, marine and river sediment, mussel tissue, fish oil and tissue, and human serum, with concentrations typically assigned for 50 to 90 organic contaminants, for example PAHs, nitro-substituted PAHs, PCBs, chlorinated pesticides, and polybrominated diphenyl ethers (PBDEs). Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Advantages and limitations of on-line solid phase extraction coupled to liquid chromatography-mass spectrometry technologies versus biosensors for monitoring of emerging contaminants in water

On-line solid phase extraction (SPE) coupled to liquid chromatography-mass spectrometry (LC-MS) and biosensors are advanced technologies that have found increasing application in the analysis of environmental contaminants although their application to the determination of emerging contaminants (previously unknown or unrecognized pollutants) has been still limited. This review covers the most recent advances occurred in the areas of on-line SPE-LC-MS and biosensors, discusses and compares the main strengths and limitations of the two approaches, and examines their most relevant applications to the analysis of emerging contaminants in environmental waters. So far, the on-line configuration most frequently used has been SPE coupled to liquid chromatography-(tandem) mass spectrometry. Sorbents used for on-line SPE have included both traditional (alkyl-bonded silicas and polymers) and novel (restricted access materials (RAMs), molecularly imprinted synthetic polymers (MIPs), and immobilized receptors or antibodies (immunosorbents) materials. The biosensor technologies most frequently applied have been based on the use of antibodies and, to a lesser extent, enzymes, bacteria, receptors and DNA as recognition elements, and the use of optical and electrochemical transducing elements. Emerging contaminants investigated by means of these two techniques have included pharmaceuticals, endocrine disrupting compounds such as estrogens, alkylphenols and bisphenol A, pesticides transformation products, disinfection by-products, and bacterial toxins and mycotoxins, among others. Both techniques offer advantageous, and frequently comparable, features such as high sensitivity and selectivity, minimum sample manipulation, and automation. Biosensors are, in addition, relatively cheap and fast, which make them ideally suited for routine testing and screening of samples; however, in most cases, they can not compete yet with on-line SPE procedures in terms of accuracy, reproducibility, reliability (confirmation) of results, and capacity for multi-analyte determination.     

核酸介导信号放大光学生物传感器在食品污染物检测中的应用EI北大核心CSCD

信号放大是新型生物传感分析过程中重要的环节。核酸介导的信号放大技术凭借核酸材料灵活的结构设计、低成本和易于制备等特点,在生物传感快速检测技术的开发上逐渐发展成为一项重要的分支,广泛应用于食品、环境和医药等新型检测方法开发。介绍了传统和新型核酸扩增技术、生物条形码和DNA walker等信号放大机理和应用,同时进一步综述核酸信号放大技术结合光学生物传感在食品污染物中检测的应用,如化学污染物、毒素类污染物、和重金属污染物等,并对核酸介导的信号放大技术在食品污染物检测中的问题和前景进行讨论。