Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.     

荧光磁性双功能树状分子微球的制备与表征

采用化学共沉淀法, 以FeCl₃·6H₂O和FeSO₄·7H₂O为原料制备了磁性Fe₃O₄纳米颗粒, 采用树状大分子对其进行修饰, 然后通过树状大分子具有的大量空腔及末端丰富的氨基, 经吸附、 键合, 与大量巯基乙酸修饰的CdSe/CdS量子点连接, 得到三代具有荧光磁性双功能的树状分子微球, 并对其进行结构表征与性能测试. 结果表明: 三代复合后的微球的平均粒径分别为15, 34和49 nm; 一代荧光磁性微球的发光性能最佳, 其量子产率达24.1%; 零代荧光磁性微球磁性能最优, 其饱和磁化强度为15.96 A·m²/kg. 这种具有荧光和磁性的双功能纳米复合微粒有望在免疫检测、 靶向治疗、 荧光追踪和磁性分离等方面得到广泛应用.     

配体交换法制备水中高分散稳定性的多羧基修饰Fe3O4纳米颗粒

采用油相高温分解法制备了粒径可控且单分散的油溶性Fe3O4磁性纳米粒子(MNPs-OA), 并通过配体交换对其表面进行了亲水性修饰, 制备了柠檬酸(CA)、 N-(三甲氧基硅丙基)乙二胺三乙酸钠(SiCOOH)、 丁烷四羧酸(BTCA)和乙二胺四乙酸 (EDTA)四钠4种多羧基配体修饰的水溶性Fe3O4磁性纳米粒子(MNPs-CA, MNPs-SiCOOH, MNPs-BTCA 和MNPs-EDTA), 其中首次选用四羧基配体BTCA和EDTA四钠来修饰Fe3O4磁性纳米粒子(MNPs). 对油溶性MNPs和4种水溶性MNPs的形貌、 结构、 化学组成和磁性能进行了表征, 并对4种多羧基配体修饰的水溶性MNPs在水相中的稳定性和分散性进行了表征. 结果表明, 所得MNPs的平均粒径为15 nm, 具有超顺磁性, 配体交换后的水溶性MNPs具有良好的亲水性, 并在弱酸～碱性很宽的pH范围内具备良好的分散稳定性. 此类多羧基修饰的水溶性MNPs可与适当的阳离子聚电解质进行组装, 从而得到在磁靶向载体和磁共振造影(MRI)显影中具有良好应用前景的磁性自组装微囊.     

Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

β-Cyclodextrin assisted one-pot synthesis of mesoporous magnetic Fe3O4@C and their excellent performance for the removal of Cr Ⅵ from aqueous solutions

Mesoporous magnetic Fe3O4@C nanoparticles have been synthesized by a one-pot approach and used as adsorbents for removal of Cr (Ⅳ) from aqueous solution. Magnetic iron oxide nanostructured materials encapsulated by carbon were characterized by scanning electron microscope (SEM), nitrogen adsorption and desorption, X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The adsorption performance of the nanomaterial adsorbents is tested with the removal of Cr (Ⅳ) from aqueous solution. The results reveal that the mesoporous magnetic Fe3O4@C nanospheres exhibit excellent adsorption efficiency and be easily isolated by an external magnetic field. In comparison with magnetic Fe3O4 nanospheres, the mesoporous magnetic Fe3O4@C exhibited 1.8 times higher removal rate of Cr Ⅵ. Themesoporous structure and an abundance of hydroxy groups on the carbon surfacemay be responsible for high absorbent capability.     

Preparation and characterization of cross-linked β-cyclodextrin polymer/Fe_3O_4 composite nanoparticles with core-shell structures

Cross-linkedβ-cyclodextrin polymer/Fe₃O₄ composite nanoparticles with core-shell structures were prepared via cross linking reaction on the surface of carboxymethylβ-cyclodextrin（CM-β-CD） modified Fe₃O₄ nanoparticles inβ-cyclodextrin alkaline solution by using epichlorohydrin as crosslinking agent.The morphology,structure and magnetic properties of the prepared composite nanoparticles were investigated by transmission electron microscopy（TEM）,Fourier transform infrared（FTIR） spectrometry,X-ray diffraction（XRD） measurement,thermogravimetric analysis（TGA） and Vibrating sample magnetometry （VSM）,respectively.     

磁性量子点电致化学发光法测定李氏禾提取液中的过氧化氢

利用巯基乙酸水热法合成出表面修饰—COOH的CdTe量子点,并将CdTe量子点(QDs)连接在Fe3O4纳米粒子表面,制备出CdTe/Fe3O4磁性量子点。通过磁力将磁性量子点修饰于石墨电极表面。在pH7.5的PBS缓冲溶液中,H2O2可使CdTe量子点产生电致化学发光,H2O2浓度在4～100μmol/L范围内与CdTe量子点的电致化学发光强度呈良好的线性关系,检出限为0.24μmol/L。据此建立了测定样品中过氧化氢含量的电致化学发光分析法,并成功地应用于李氏禾草汁原液中过氧化氢含量的测定。该研究借助纳米Fe3O4的磁力特征,使敏感膜易于形成和更新分离,简化了实验操作,同时起到增强发光强度的作用。     

Chemiluminescence of CdTe quantum dots using K3Fe(CN)6 as oxidant and its capping ligand-dependent effect

Water-soluble CdTe quantum dots (QDs) capped with three different thioalkyl acids (mercaptoacetic acid, cysteine and glutathione) were synthesized in aqueous solution. In basic media, K₃Fe(CN)₆ could directly oxidize the water-soluble CdTe QDs to produce strong CL emission. It was found that the CL intensity depended on the capping ligand and size of CdTe QDs. CL spectra and fluorescence spectra of the system were measured to investigate the CL reaction mechanism. Moreover, the effects of 17 metal ions on the CL system were carefully investigated. Ca²⁺, Co²⁺, Mn²⁺, Hg²⁺, Mg²⁺, Cu²⁺, Ni²⁺, Cr³⁺ and Fe³⁺ could markedly inhibit the CL signal of the K₃Fe(CN)₆–CdTe QDs system, which makes it applicable for the detection of such ions. This work is of importance for gaining a better understanding of the unique optical and physical chemistry properties of QDs, and it is also helpful to find more practical applications of QDs.     

无机-高分子-无机多组分核壳纳米复合材料的制备和表征

Fe₃O₄ nanoparticles were prepared by chemical co-precipitation using palmitic acid as surfactant， then a uniformly dispersed system of Fe₃O₄@Polymethylmethacrylates(PMMA) core-shell structure was obtained. Furtherm-ore， polymethylmethacrylates(PNIPAM) was encapsulated on the surface of the Fe₃O₄@PMMA core-shell nano-structure to get Fe₃O₄@PMMA@PNIPAM double shell-core composite structure. After that， the Ag nano-particles were assembled on the surface of Fe₃O₄@PMMA@PNIPAM taking advantage of coordination reaction between Ag⁺ and nitrogen atom on the amide group of PNIPAM. The magnetism of composites is convenient for the catalyst separation from the solution.     

Cadmium Tellurium Quantum Dots in Sol-Gel-Derived Silica Spheres Coated with Calix[6]Arene as an Optical Probe for Dalapon

This paper reports a new optical probe for detect dalapon. We have synthesized the luminescent and stable CdTe quantum dots(QDs) capped with calix[6]arene(C[6]/SiO₂/CdTe) via the sol-gel technique in aqueous media. These hybrid organic-inorganic compounds are characterized by IR spectroscopy, ultraviolet-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and fluorescence. We found that the C[6]/SiO₂/CdTe were more stable and had higher fluorescence than the SiO₂/CdTe nanoparticles (NPs). The C[6]/SiO₂/CdTe show selectivity and sensitivity to dalapon via significant fluorescence intensity decrease. It can be ascribed to the Stern-Volmer equation. Under the optimal conditions, the relative fluorescent intensity was decreased linearly with increasing dalapon concentration in the range of 1.0–25.0 nmol/L with a detection limit of 0.262 nmol/L of dalapon. The possible underlying mechanism is discussed by Langmuir binding isotherm.     

Rapid magnetic solid phase extraction with in situ derivatization of methylmercury in seawater by Fe3O4/polyaniline nanoparticle

A new Fe(3)O(4)/polyaniline nanoparticle (PANI) material has been successfully developed as magnetic solid-phase extraction sorbent in dispersion mode for the determination of methylmercury (MeHg) in aqueous samples, via quantification by gas chromatography/mass spectrometry (GC-MS). The resultant core-shell magnetic solid-phase extraction nanoparticle (MSPE-NP) sorbent was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS) and Fourier transform-infrared (FTIR) spectroscopy. Fe(3)O(4)/PANI composites showed fibrous structure with diameters between 50 and 100 nm for fibers. The MSPE-NP process involved the dispersion of the Fe(3)O(4)/PANI nanoparticles in water samples with sonication, followed by magnetic aided retrieval of the sorbent and then, solvent (hexane) desorption of extracted MeHg for GC-MS analysis. The extraction, derivatization and adsorption conditions were optimized by selecting the appropriate extraction parameters including the amount of sorbent, extraction time, derivatizing reagent volume and extraction solvent. The calibration graph was linear in the concentration range of 0.5-300 ng mL(-1) (R(2)>0.993) with detection limit of 0.1 ng mL(-1) (n=3), while the repeatability was 4.1% (n=5). Enrichment factor was obtained as 91. Seawater sample was analyzed as real sample and good recoveries (>98%) were obtained at different spiked values.     

Fluorometric method for the determination of hydrogen peroxide and glucose with Fe3O4 as catalyst

In this paper, we utilized the instinct peroxidase-like property of Fe₃O₄ magnetic nanoparticles (MNPs) to establish a new fluorometric method for determination of hydrogen peroxide and glucose. In the presence of Fe₃O₄ MNPs as peroxidase mimetic catalyst, H₂O₂ was decomposed into radical that could quench the fluorescence of CdTe QDs more efficiently and rapidly. Then the oxidization of glucose by glucose oxidase was coupled with the fluorescence quenching of CdTe QDs by H₂O₂ producer with Fe₃O₄ MNPs catalyst, which can be used to detect glucose. Under the optimal reaction conditions, a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of H₂O₂ from 1.8 × 10⁻⁷ to 9 × 10⁻⁴ mol/L with a detection limit of 1.8 × 10⁻⁸ mol/L. And a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of glucose from 1.6 × 10⁻⁶ to 1.6 × 10⁻⁴ mol/L with a detection limit of 1.0 × 10⁻⁶ mol/L. The proposed method was applied to the determination of glucose in human serum samples with satisfactory results.     

Characterization and application of Fe3O4/SiO2 nanocomposites

A sol-gel procedure was used to cover Fe₃O₄ nanoparticles with SiO₂ shell, forming a core/shell structure. The core/shell nanocomposites were synthesized by a two-step process. First, Fe₃O₄ nanoparticles were obtained through co-precipitation and dispersed in aqueous solution through electrostatic interactions in the presence of tetramethylammonium hydroxide (TMAOH). In the second step, Fe₃O₄ was capped with SiO₂ generated from the hydrolyzation of tetraethyl orthosilicate (TEOS). The structure and properties of the formed Fe₃O₄/SiO₂ nanocomposites were characterized and the results indicate that the Fe₃O₄/SiO₂ nanocomposites are superparamagnetic and are about 30 nm in size. Bioconjugation to IgG was also studied. Finally, the mechanism of depositing SiO₂ on magnetic nanoparticles was discussed.     

Bi2Fe4O9纳米粉体:水热法制备及表征

Bi₂Fe₄O₉ nanoparticles were prepared at low temperature via a facile, one-step hydrothermal synthesis process using iron(Ⅲ) nitrate nonahydrate(Fe(NO₃)₃·9H₂O) and bismuth nitrate pentahydrate (Bi(NO₃)₃·5H₂O) as starting materials and sodium hydroxide (NaOH) as the precipitant and mineralizer. XRD results indicate that the as-prepared nanoparticles are pure Bi₂Fe₄O₉. SEM images reveal that the as-prepared Bi₂Fe₄O₉ nanoparticles have a sheet-like morphology. The Bi₂Fe₄O₉ nanoparticles thus obtained are paramagnetic at room temperature as shown by magnetic measurements.     

磁性Fe_3O_4-聚吡咯纳米微球的合成与表征

报道了具有核壳结构的Fe3O4 聚吡咯磁性纳米微球的合成方法和表征结果 .微球同时具有导电性和磁性能 .在优化的实验条件下 ,可得到饱和磁化强度为 2 3 4emu g ,矫顽力为 45 2Oe的磁性微球 .微球的导电性随着微球中Fe3O4含量的增加而下降 .微球的磁性能则随着Fe3O4含量的增加而增大 .Fe3O4磁流体的粒径和磁性聚吡咯微球的粒径均在纳米量级 .纳米Fe3O4粒子能够提高复合物的热性能 .实验表明 ,磁流体和聚吡咯之间存在着一定的相互作用 ,正是这种相互作用使磁性聚吡咯纳米微球的热稳定性提高 .     

Luminescent and magnetic Fe3O4/Py/PAM nanocomposites for the chromium(VI) determination

A novel luminescent and magnetic Fe(3)O(4)/pyrene/polyacrylamide (Fe(3)O(4)/Py/PAM) nanocomposite has been prepared under ultrasonic radiation. This magnetic nanocomposite combined with pyrene would lead to a special functional magnetic luminescent composite that enjoys both the advantages of magnetic nanoparticles of Fe(3)O(4) and fluorescence nanoparticles of pyrene. Taking advantage of the magnetic property of Fe(3)O(4) nanocomposites, we can separate Fe(3)O(4)/Py/PAM nanocomposites from solution easily just by using a permanent magnet. Based on the fluorescence quenching of Fe(3)O(4)/Py/PAM nanocomposites by Cr(VI), a method for the selective determination of Cr(VI), without separation of Cr(III) in water, was developed. Under optimal experimental conditions, a limit of detection of 0.01 microg mL(-1) was achieved. The calibration curve was linear over the concentration range of 0.1-14.0 microg mL(-1) with a correlation coefficient of 0.9975. The proposed method has been applied to the selective quantification of Cr(VI) in synthetic samples and wastewater samples with the satisfactory results.     

碲化镉/马来酰亚胺三嗪纳米杂化材料的制备及其光性能研究

利用低温水相法, 以巯基丙酸(MPA)作为稳定剂制备了碲化镉(CdTe)量子点, 通过马来酰亚胺三嗪(TMT)中的三嗪基团与CdTe量子点表面富含的羧基之间的氢键作用, 得到了分散性能优良的纳米杂化材料. 利用紫外-可见吸收光谱、荧光光谱以及透射电子显微镜等手段对产物的光物理性质和形貌进行了表征. 结果表明, 马来酰亚胺三嗪与CdTe量子点杂化后, CdTe量子点的荧光发射峰有明显的蓝移, 在CdTe量子点和马来酰亚胺三嗪之间存在着能量转移, 并且纳米杂化材料的分散性也有明显的改善.     

Ag修饰的Fe_3O_4/TiO_2复合磁性纳米纤维的制备及光催化性能

通过静电纺丝法制备了含有Fe3O4纳米粒子的TiO2纳米纤维,采用水热法对该纤维表面进行纳米Ag修饰,制备出具有较强磁性和较好光催化性能的复合纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见光谱(UV-Vis)等对样品的结构和形貌进行表征,并以罗丹明B(Rh B)水溶液降解为模型反应,考察样品在紫外光照射下的光催化性能.结果表明,所制备的TiO2为锐钛矿结构,Fe3O4纳米粒子均匀分布在TiO2纤维中,Ag纳米颗粒比较均匀地分散在磁性TiO2纤维表面.经过纳米Ag修饰后,材料的光吸收能力大为增强,吸收带红移并扩展到可见光区.在紫外光照射40 min后,合成样品对Rh B的降解率达到99.5%.此外,Fe3O4纳米粒子的存在使该材料具有较强的磁性,可通过外加磁场将其分离回收.     

MgFe2O4纳米粉体的水热合成及其表征(英)

MgFe₂O₄ nanoparticles were hydrothermally synthesized at 150 ℃ using iron nitrate [Fe(NO₃)₃·9H₂O], magnesium nitrate [Mg(NO₃)₂·6H₂O] and sodium hydroxide (NaOH) as starting materials by carefully controlling the reaction conditions. The influences of several factors such as presence or absence of Na⁺, molar ratio of Fe³⁺ / Mg²⁺, concentration of mental ions, temperature and reaction time on resultant products were investigated in the hydrothermal process. The sample was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), and its magnetic properties were measured using vibrating sample magnetometer (VSM).     

Preparation and characterization of thermosensitive polymers grafted onto silica-coated iron oxide nanoparticles

In this study, multifunctional nanoparticles containing thermosensitive polymers grafted onto the surfaces of 6-nm monodisperse Fe(3)O(4) magnetic nanoparticles coated by silica were synthesized using reverse microemulsions and free radical polymerization. The magnetic properties of SiO(2)/Fe(3)O(4) nanoparticles show superparamagnetic behavior. Thermosensitive PNIPAM (poly(N-isopropylacrylamide)) was then grafted onto the surfaces of SiO(2)/Fe(3)O(4) nanoparticles, generating thermosensitive and magnetic properties of nanocomposites. The sizes of fabricated nanoparticles with core-shell structure are controlled at about 30 nm and each nanoparticle contains only one monodisperse Fe(3)O(4) core. For thermosensitivity analysis, the phase transition temperatures of multifunctional nanoparticles measured using DSC was at around 34-36 degrees C. The magnetic characteristics of these multifunctional nanoparticles were also superparamagnetic.