Synthesis of poly(2-cyclohexenone-4-yl methacrylate) and acidolysis of pendant protecting groups in the polymer

4-Acetoxy-2-cyclohexenone (ACH) and 2-cyclohexenone-4-yl methacrylate (CHM) were obtained from the condensation reaction of 4-bromo-2-cyclohexenone (BCH) with acetic acid and methacrylic acid using 1,8-diazabicyclo-[5,4,0]-7-undecene (DBU), respectively. Poly(2-cyclohexenone-4-yl methacrylate) ( P-1 ) containing acid-sensitive 2-cyclohexenone-4-yl group was prepared from the radical polymerization of CHM and the esterification of poly(methacrylic acid) with BCH using DBU. Furthermore, P-1 and CHM copolymers ( P-2 and P-3 ) were easily synthesized from the radical polymerization of methacrylic acid and comonomers in dimethylsulfoxide using 1 mol % of 2,2′-azobis (isobutyronitrile) followed by esterification of the resulting polymers with BCH using DBU by one-pot method. The deprotection reaction of ACH and P-1 was carried out in dichloromethane using an acid catalyst. The reaction proceeded smoothly in solution to give phenol and the corresponding carboxylic acid. Therefore, the 2-cyclohexenone-4-yl group is a useful protecting group for carboxylic acids, because the protection and deprotection reactions are very easy. In the case of polymer films, however, the acid was trapped by carbonyl group on the 2-cyclohexenone-4-yl group, and did not cause the deprotection reaction. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of a new member of the calixnaphthalene family: a C(2)-symmetrical endo-calix[4]naphthalene

The synthesis of a new endo-calix[4]naphthalene is described. The reaction sequence involves the cyclocondensation of a key bisnaphthylmethane intermediate (8) with formaldehyde. This key intermediate (8) is formed using a modified Suzuki-Miyaura Pd-catalyzed cross-coupling reaction between bromomethylnaphthyl (6) and naphthylboronic acid (7), both of which can be derived from 2-hydroxynaphthoic acid.     

(±)‐2‐Aryl‐2,3‐dihydro‐4(1H)‐quinolinones by a tandem reduction–Michael addition reaction

An efficient synthesis of (±)‐2‐aryl‐2,3‐dihydro‐4(1H)‐quinolinones has been developed from chalcones prepared from 2′‐nitroacetophenone and a series of substituted benzaldehydes. The cyclization sequence is initiated by reduction of the nitro group under dissolving metal conditions using iron powder in concentrated hydrochloric acid. Milder conditions, using acetic acid or acetic acid–phosphoric acid as the reaction medium, were less satisfactory. Procedural details as well as a mechanistic discussion and reaction optimization studies are presented. J. Heterocyclic Chem., (2011).     

Kinetic explosion and bistability in adsorption and reaction of acetic acid on Pd(110)

The adsorption and reaction of acetic acid with Pd(110) have been studied using thermal molecular beam reaction measurements and temperature-programmed desorption. Acetic acid adsorption results in the formation of acetate species which decompose to produce coincident CO(2) and H(2) desorption from the surface. C is deposited on the surface from the dehydrogenation of the methyl group. In combination, these steps are found to exhibit unusual kinetics including (i) a "surface explosion" during heating and (ii) bistability in the reaction profile for heating and cooling curves. This is the first report of such behaviour for a complex system during in situ reaction.     

Assay of sialidase activity using ion-exchange chromatography and acidic ninhydrin reaction.

A new assay method for sialidase (EC 3.2.1.18) activity using ion-exchange chromatography and acidic ninhydrin reaction has been developed. Fetuin, 4-methylumbelliferyl-N-acetylneuraminic acid (MUB-NANA), gangliosides and N-acetylneuramin-lactose were examined as substrates. Free sialic acid liberated from these substrates by sialidase reaction was isolated with a Dowex 1-X8 column (trifluoroacetate form, 1.5 cm x 0.5 cm I.D.) and determined by acidic ninhydrin reaction. Among the substrates tested, MUB-NANA was the best in the present method, N-Acetylneuramin-lactose could not be used as the substrate, because it was not separated from liberated sialic acid under the conditions used. The recovery of N-acetylneuraminic acid was above 88%, and the sensitivity of the method was 20 nmol in 300 microliters of the reaction mixture. The method was applied to the sialidase assay during its purification from rat skeletal muscle, and a Michaelis constant of 1.15 mM was obtained with MUB-NANA as the substrate. The method using the acidic ninhydrin reaction was simple and exhibited good reproducibility.     

Synthesis of Coordination Polymers Using Different Maleic Acid Ligands under Hydrothermal Conditions

A novel coordination polymer, [Ni(mal)(1,10′-phen)(H2O)]n(1)(mal=malate, 1,10′-phen=1,10-phenanthroline) was synthesized using malic acid which was generated from maleic acid via hydrothermal reaction. Complex 1, which displays a two-dimensional supramolecular network, was formed by the addition reaction of Ni and maleic acid with water molecules. To our knowledge, several coordination polymers have been directly synthesized from malic acid, but these types of complexes have seldom been synthesized from maleic acid via hydrothermal reactions. When Ni(Ⅱ) ion was changed to Zn(Ⅱ) ion under the same condition, two-dimensional covalent complex 2[Zn2(fma)2(1,10′-phen)2]n(fma=fumatic acid) was formed. Furthermore, complex 2 exhibits intense photoluminescent property at room temperature.     

Hofmann-type rearrangement of imides by in situ generation of imide-hypervalent iodines(III) from iodoarenes

The Hofmann-type rearrangement of aromatic and aliphatic imides using a hypervalent iodine(III) reagent generated in situ from PhI, m-CPBA, and TsOH·H(2)O proceeded in the presence of a base in alcohol to provide anthranilic acid derivatives and amino acid derivatives in high yields, respectively. This reaction proceeds through a tandem reaction via alcoholysis followed by a Hofmann rearrangement promoted by the formation of an imide-λ(3)-iodane intermediate.     

Fatty acid methyl ester production from acid oil using silica sulfuric acid: Process optimization and reaction kinetics

Conversion of high free fatty acids (FFA) containing acid oil (AO) to fatty acid methyl esters (FAME) using silica sulfuric acid (SSA) as a solid acid catalyst was investigated. Process parameters such as reaction temperature, reaction time, catalyst loading, and methanol to oil molar ratio were optimized using the Taguchi orthogonal array method. Maximum FFA conversion (97.16 %) was achieved under the optimal set of parameter values viz. 70°C, 4 mass % catalyst loading, and 1: 15 oil to methanol molar ratio after 90 min. SSA was reused three times successfully without a significant loss in activity. Biodiesel produced from AO met the international biodiesel standards. Determination of kinetic parameters proved that the experimental results fit the pseudo first order kinetic law.     

Application of in-situ attenuated total reflection-Fourier transform infrared spectroscopy for the understanding of complex reaction mechanism and kinetics: formic acid oxidation on a Pt film electrode at elevated temperatures

The potential of in-situ Fourier transform infrared (FTIR) spectroscopy measurements in an attenuated total reflection configuration (ATR-FTIRS) for the evaluation of reaction pathways, elementary reaction steps, and their kinetics is demonstrated for formic acid electrooxidation on a Pt film electrode. Quantitative kinetic information on two elementary steps, formic acid dehydration and CO(ad) oxidation, and on the contributions of the related pathways in the dual path reaction mechanism are derived from IR spectroscopic signals in simultaneous electrochemical and ATR-FTIRS measurements over a wide temperature range (25-80 degrees C). Linearly and multiply bonded CO(ad) and bridge-bonded formate are the only formic acid related stable reaction intermediates detected. With increasing temperature, the steady-state IR signal of CO(ad) increases, while that of formate decreases. Reaction rates for CO(ad) formation via formic acid dehydration and for CO(ad) oxidation as well as the activation energies of these processes were determined at different temperatures, potentials, and surface conditions (with and without preadsorbed CO from formic acid dehydration) from the temporal evolution of the IR intensities of CO(ad) during adsorption/reaction transients, using an IR intensity-CO(ad) coverage calibration. At potentials up to 0.75 V and temperatures from 25 to 80 degrees C, the "indirect" CO pathway contributes less than 5% (at potentials < or =0.6 V significantly below 1%) to the total Faradaic reaction current, making the "direct" pathway by far the dominant one under the present reaction conditions. Much higher activation energies for CO(ad) formation and CO(ad) oxidation compared with the effective activation energy of the total reaction, derived from the Faradaic currents, support this conclusion.     

Preparation and utilization of perillyl acetate

Perillyl acetate is a fragrance compound that was prepared by the reaction of β-pinenoxide with acetic anhydride and using acetic acid as an acid catalyst. Several selected catalysts were tested (homogenous: phosphoric acid, boric acid, acetic acid, and citric acid; heterogeneous: zeolite USY, SSA, and montmorillonite K-10) and the reaction conditions optimized for this reaction. The yield 78.7 % of perillyl acetate was obtained. Mayol (4-isopropylcyclohexylmethanol), a valuable fragrance compound, was further obtained by a two-step synthesis from perillyl acetate. Firstly, perillyl acetate was saponified to perillyl alcohol. The yield of alcohol was 94.4 %. The last step of the entire preparation was the hydrogenation of perillyl alcohol to Mayol. The yield of the desired product of this reaction was 94.6 %.     

Precise 2D-Patterned Incompatible Catalysts for Reactions in One-Pot

Precise and direct two-dimensional (2D) printing of the incompatible polymer acid–base catalysts and their utility in one-pot two-step reactions were shown. Multistep catalytic reactions using incompatible catalysts in a one-pot reaction cascade requires special methods and materials to isolate the catalysts from each other. In general, this is a tedious process requiring special polymer architectures as the carrier for the catalysts to preserve the activity of otherwise incompatible catalysts. We propose the immobilization of incompatible polymer catalysts, such as polymer acid and base catalysts, on a substrate in variable sizes and amounts by precise 2D printing. The terpolymers with basic (4-vinylpyridine) and acidic (styrene sulfonic acid) functionalities and methacryloyl benzophenone as a UV cross-linking unit were used for 2D printing on poly(ethylene terephthalate) (PET). The printed meshes were immersed together in a reaction solution containing (dimethoxymethyl)benzene and ethyl cyanoformate, resulting in a two-step acid–base catalyzed cascade reaction; that is, deacetalization followed by carbon-building reaction. The time-dependent consumption of (dimethoxymethyl)benzene to the intermediate benzaldehyde and the product was monitored, and a kinetic model was developed to investigate the underlying reaction dynamics. The complexity of multistep Wolf–Lamb-type reactions was generally significantly decreased by using our approach because of the easy polymerization and immobilization procedure.     

A novel method for the separation of bis(alpha-hydroxyalkyl)phosphinic acid diastereoisomers via formation of novel cyclic phosphinic acids

The reaction of aromatic and aliphatic aldehydes with hypophosphorus acid under microwave irradiation was examined. The reaction gave a mixture of a racemic pair of bis(alpha-hydroxyalkyl)phosphinic acids and acetal derivatives from the corresponding bis(alpha-hydroxyalkyl)phosphinic acids of meso-stereochemistry in good yield. The difference in solubility in organic solvents due to polarity allowed us to readily separate these compounds. This method constitutes an easy, rapid, and good-yielding preparation and separation of bis(alpha-hydroxyalkyl) phosphinic acid diastereoisomers from simple starting materials using microwave irradiation.     

Amino acids and peptides—V: Novel peptide bond formation catalyzed by metal ions—III Elucidation of the formation mechanism

Elucidation of the mechanism for peptide bond formation observed when an amino acid ester is treated with anhyd CuCl₂ in an anhyd alcoholic solvent, was attempted using results of IR and visible spectra measurements of the amino acid ester-CuCl₂ complex and accumulated experimental data.This novel reaction proceeds through a mechanism in which the amino anion produced by elimination of the proton from the Cu(II)-coordinating amino group, attacks the non-activated ester CO group of the amino acid ester which shares a common Cu(II) ion. It differs completely from the peptide formation reaction featuring a Co(III)-amino acid ester complex.     

Microwave-assisted efficient one-step synthesis of amides from ketones and benzoxazoles from (2-hydroxyaryl) ketones with acetohydroxamic acid using sulfuric acid as the catalyst

Efficient one-step method for the synthesis of amides directly from ketones and benzoxazoles from (2-hydroxyaryl) ketones by the reaction of acetohydroxamic acid using sulfuric acid as catalyst was described.     

Keggin结构型硅钨酸催化β-萘酚与醛的缩合反应

以keggin型硅钨酸为催化剂,β-萘酚、醛为原料,在乙醇和无溶剂两种体系中,分别合成了1,1’-烷基(芳基)二-2-萘酚和14-烷基(芳基)-14H-二苯并[a,j]氧杂蒽两类化合物.该方法不仅反应时间短,产率高,后处理简单易分离,而且催化剂价廉易得,对环境友好.     

Trifluoromethanesulfonic acid as a catalyst for the formation of dansylhydrazone derivatives

Trifluoromethanesulfonic acid (TFMSA) is presented as a new, efficient catalyst in the pre-column fluorescent derivatization of the 3-ketosteroid budesonide with dansylhydrazine and compared to the commonly used catalyst trifluoroacetic acid. With TFMSA the derivatization reaction may be carried out at room temperature, with a considerably higher reaction rate compared to previously used acids. The chromatograms also show that TMFSA results in less formation of spurious peaks from the reagent. Derivatization of steroid solutions ranging from 0.5 to 64 μM could be performed using identical reaction conditions.     

ATRP法合成聚去氢枞酸丙烯酸乙二醇酯的研究

本研究从歧化松香中提取的去氢枞酸(DHA)出发,经酰氯化后与丙烯酸(2-羟基)乙酯反应,合成了去氢枞酸丙烯酸乙二醇酯(DHAAGE);并以此为单体,2-溴-异丁酸乙酯(EBr-iB)为引发剂,CuBr/2,2'-联吡啶(2,2'-bipyridine)为催化体系,在90 oC下,利用原子转移聚合(ATRP)法制备了聚去氢枞酸丙烯酸乙二醇酯(PDHAAGE).利用FT-IR、1H-NMR和GPC对所制备的单体和聚合物进行了表征,同时考察了单体转化率随聚合反应时间的变化.结果表明,聚合反应动力学曲线呈良好线性关系,表观聚合速率常数kp′为3.6 ×10-7 s-1;所得聚合物的分子量分布很窄.     

Reactive desorption electrospray ionization for selective detection of the hydrolysis products of phosphonate esters

Reactive desorption electrospray ionization (reactive DESI) is demonstrated to be a rapid and sensitive method for the direct detection of alkyl methylphosphonic acids, the hydrolysis products and metabolites of the chemical warfare (CW) agents VX (S-2-diisopropylaminoethyl-O-ethyl methylphosphonothiolate) and GB (sarin, isopropylmethyl phosphonofluoridate). Rapid and sensitive detection of these compounds is readily achieved by performing DESI from a solid surface; detection specificity is enhanced by implementation of a heterogeneous ion/molecule reaction using boric acid in the spray solvent. The reagent ion H(2)BO(3) (-) generated in the spray readily reacts with condensed-phase alkyl MPA to form anionic adducts. The specificity of this chemical reaction, together with the characteristic fragmentation patterns of the reaction products, supplies a highly discriminatory detection method for methylphosphonic acid (MPA), ethylphosphonic acid (EMPA) and isopropyl methylphosphonic acid (IMPA) in complex matrices.     

Rapid and amenable suzuki coupling reaction in water using microwave and conventional heating

It is possible to prepare biaryls in good yield very rapidy (5-10 min) on small (1 mmol) and larger (10-20 mmol) scales from aryl halides and phenylboronic acid using water as a solvent and palladium acetate as catalyst. The reaction can be performed equally well using microwave and conventional heating, showing that using these conditions probably no nonthermal microwave effects are associated with the impressive speed of the reaction.     

Studies toward the total synthesis of Wiedemannic acid

[reaction: see text] We report a novel and efficient diastereoselective synthesis of wiedemannic acid analogue 30 in 16 steps from 7 using a tandem oxy-Cope/Claisen/ene reaction as the key step. Comparison of NMR data between wiedemannic acid (1) and analogue 30 leads us to believe that the reported stereochemistry at the ring junction of 1 is incorrect.