横观各向同性压电材料中正三角形孔口快速传播裂纹的解析解

利用复变函数方法,通过引入合适的数值保角映射研究了横观各向同性压电材料中正三角形孔口快速传播裂纹的反平面剪切问题,并在电非渗透型与电渗透型两种边界条件下,结合柯西积分,导出了力-电耦合作用下以速度v传播时的Ⅲ型裂纹的动态应力强度因子和电位移强度因子的解析解.最后,考虑面内电载荷和面外机械载荷共同作用,分析了三角形孔尺寸、裂纹尺寸、外载变化对裂尖场强度因子的影响.     

夹层压电材料中垂直于界面的共线双裂纹动力学问题分析

采用Schmidt方法分析了在简谐反平面剪切波作用下,两个半空间夹层压电材料中的共线裂纹的动力学行为．压电材料层内裂纹垂直于界面,电边界条件假设为可导通．通过Fourier变换,使问题的求解转换为两对三重积分对偶方程．通过数值计算,给出了裂纹的几何尺寸、压电材料常数、入射波频率等对于应力强度因子的影响．结果表明,在不同的入射波频率范围,动力场将阻碍或促使压电材料内裂纹的扩展．与不可导通电边界条件相比,导通裂纹表面的电位移强度因子比不可导通裂纹的电位移强度因子要小许多．     

一维六方压电准晶双材料界面共线裂纹问题北大核心CSCD

利用复变函数理论中的解析延拓、奇性主部分析和推广的Liouville定理,求解了一维六方压电准晶双材料在集中载荷作用下界面共线裂纹反平面弹性问题.导出了含有一条和两条有限长界面裂纹的封闭解,同时给出了裂纹尖端场强度因子(包含声子场和相位子场应力强度因子和电位移强度因子)的表达式.数值算例分析了外荷载与耦合系数之比对裂纹尖端场强度因子变化规律的影响.从数值结果中可以看出,当裂纹长度增加时,裂纹尖端场强度因子随之增加;应力强度因子随双材料耦合系数之比的增大而增大,电位移强度因子几乎不变;不同载荷作用下,裂纹尖端场强度因子随着裂纹长度改变时的变化趋势也不尽相同.研究结果可为压电准晶双材料的设计和制备提供一定的理论参考.     

压电材料中两个非对称平行裂纹的基本解

采用Schmidt方法分析压电材料中非对称平行的双可导通裂纹的断裂性能．利用Fourier变换使问题的求解转换为求解两对以裂纹面位移之差为未知变量的对偶积分方程．为了求解对偶积分方程,直接把裂纹面位移差函数展开成Jacobi多项式形式．最终得到了裂纹的应力强度因子与电位移强度因子之间的关系．数值结果表明,应力强度因子和电位移强度因子与裂纹间的距离、裂纹的几何尺寸有关;与不可导通裂纹有关结果相比,可导通裂纹的电位移强度因子远小于相应问题不可导通裂纹的电位移强度因子．同时可以发现裂纹间的“屏蔽”效应也在压电材料中出现．     

半平面压电体的Green函数及其应用

本文研究半平面压电体在线力、电荷和位错作用下的弹性场和电场，即Green函数．基于各向异性弹性力学中的Stroh方法和解析延拓理论，推导了Green函数的封闭形式的解．作为解的应用，分析了含半无限裂纹的无限大压电介质的机电耦合场，给出了应力和电位移强度因子的解析表达式．     

压电材料中两平行对称可导通裂纹断裂性能分析

采用Schmidt研究了压电材料中对称平行的双可导通裂纹的断裂性能,利用富里叶变换使问题的求解转换为求解两对以裂纹面位移之差为未知变量的对偶积分方程,并采用Schmidt方法来对这两对对偶积分程进行数值求解。结果表明应力强度因子和电位移强度因子与裂纹的几何尺寸有关。与不可导通裂纹有关结果相比,可导通裂纹的电位移强度因子远小于相应问题不可导通裂纹的电位移强度因子。     

压电压磁复合材料中一对平行裂纹对弹性波的散射

利用Schmidt方法对压电压磁复合材料中一对平行对称裂纹对反平面简谐波的散射问题进行了分析,借助富里叶变换得到了以裂纹面上的间断位移为未知变量的对偶积分方程．在求解对偶积分方程的过程中,裂纹面上的间断位移被展开成雅可比多项式的形式,最终获得了应力强度因子、电位移强度因子、磁通量强度因子三者之间的关系．结果表明,压电压磁复合材料中平行裂纹动态反平面断裂问题的应力奇异性与一般弹性材料中的动态反平面断裂问题的应力奇异性相同,同时讨论了裂纹间的屏蔽效应．     

权函数法研究高速旋转厚壁筒的应力强度因子

采用厚壁筒在内压作用下的应力强度因子作为参考载荷的应力强度因子,通过权函数方法推导出了内壁带二维径向边裂纹的旋转厚壁筒的应力强度因子公式．这些公式可用于计算旋转厚壁筒在不同裂纹深度、转速、材料和尺寸情况下的应力强度因子．算例表明该文的公式具有良好的精度．同时还研究了旋转圆筒应力强度因子随裂纹深度和内外径比之间的变化规律,方便了工程应用．     

压电材料中两平行不相等界面裂纹的动态特性研究

利用Schmidt方法,研究了压电材料中两个平行不相等的可导通界面裂纹对简谐反平面剪切波的散射问题．利用Fourier变换,使问题的求解转换为对两对以裂纹面张开位移为未知变量的对偶积分方程的求解．数值计算结果表明,动态应力强度因子及电位移强度因子受裂纹的几何参数、入射波频率的影响．在特殊情况下,与已有结果进行了比较分析．同时,电位移强度因子远小于不可导通电边界条件下相应问题的结果．     

压电压磁复合材料中界面裂纹对弹性波的散射

利用Schmidt方法分析了压电压磁复合材料中可导通界面裂纹对反平面简谐波的散射问题．经过富里叶变换得到了以裂纹面上的间断位移为未知变量的对偶积分方程A·D2在求解对偶积分方程的过程中,裂纹面上的间断位移被展开成雅可比多项式的形式．数值模拟分析了裂纹长度、波速和入射波频率对应力强度因子、电位移强度因子、磁通量强度因子的影响A·D2从结果中可以看出,压电压磁复合材料中可导通界面裂纹的反平面问题的应力奇异性形式与一般弹性材料中的反平面问题应力奇异性形式相同．     

Transient response of two collinear dielectric cracks in a piezoelectric solid under inplane impacts

The paper is focused on the dynamic analysis of two collinear dielectric cracks in a piezoelectric material under the action of in-plane electromechanical impacts. Considering the dielectric permeability of crack interior, the electric displacements at the crack surfaces are governed by the jumps of electric potential and crack opening displacement across the cracks. The permeable and impermeable crack models are the limiting cases of the general one. The Laplace and Fourier transform techniques are further utilized to solve the mixed initial-boundary-value problem, and then to obtain the singular integral equations with Cauchy kernel, which are solved numerically. Dynamic intensity factors of stress, electric displacement and crack opening displacement are determined in time domain by means of a numerical inversion of the Laplace transform. Numerical results for PZT-5H are calculated to show the effects of the dielectric permeability inside the cracks, applied electric loadings and the geometry of the cracks on the fracture parameters in graphics. The observations reveal that based on the COD intensity factor, a positive electric field enhances the dynamic dielectric crack growth and a negative one impedes the dynamic dielectric crack growth in a piezoelectric solid.     

Electrostrictive stresses near crack-like flaws

Slit cracks in purely dielectric material systems do not perturb any applied uniform electric field. Furthermore, when the dielectric is unconstrained and does not support any conducting plates or mechanical loads, there are no additional mechanical stresses generated in the material upon introduction of the crack. This situation applies to both electrostrictive and piezoelectric materials. However, flaws which have finite thickness such as thin elliptical or ellipsoidal voids will cause severe inhomogeneous concentration of the electric field. In turn, this can generate substantial mechanical stress from electrostrictive or piezoelectric sources. The effect of an elliptical through flaw in an infinite isotropic body is considered. It is found that, in the case of thin ellipses, the near flaw tip mechanical stresses approximate the singular stresses near a slit crack with an equivalent stress intensity factor. In that sense, the flaw may be considered as a slit crack and treated in terms of linear elastic fracture mechanics. However, except for impermeable and conducting flaws, the value of the equivalent stress intensity factor depends on the aspect ratio of the flaw. As the aspect ratio of the flaw diminishes, the magnitude of the equivalent stress intensity factor falls and disappears in the limit of a slit crack. The results are used to show that a flaw-like crack in a material with a very high dielectric constant can be treated by fracture mechanics as an impermeable slit crack when the flaw aspect ratio is an order of magnitude greater than the ratio of dielectric permittivities (flaw value divided by the value for the surrounding material).     

Transient response of dissimilar piezoelectric layers with multiple interacting interface cracks

In this study, we examine the dynamic behavior of two bonded dissimilar piezoelectric layers containing multiple interfacial cracks subjected to electro-mechanical impact loading. The problem was formulated through Fourier transformation into singular integral equations in which the unknown variables are the jumps of displacement and electric potential across the crack surface in the Laplace transform domain. The resulting integral equations together with the corresponding single-valued conditions are solved numerically for the densities of electro-elastic dislocations on a crack surface. The dynamic field intensity factors and dynamic energy release rate (DERR) history are obtained for both permeable and impermeable crack. The stress field is also obtained for the interface crack under impact loads. The results show that the field intensity factors at the crack tips and dynamic energy release rate depend on the interfacial crack geometry, electromechanical coupling and the electric boundary conditions on the crack surface.     

Basic solutions of a 3D rectangular limited-permeable crack or two 3D rectangular limited-permeable cracks in the piezoelectric/piezomagnetic composite materials

The solutions of a three-dimensional rectangular limited-permeable crack or two three-dimensional rectangular limited-permeable cracks in the piezoelectric/piezomagnetic composite materials were investigated by using the generalized Almansi’s theorem and the Schmidt method. Finally, the relations among the electric field, the magnetic flux field and the stress field near the crack tips were obtained and the effects of the electric permittivity, the magnetic permeability of the air inside the crack, the shape of the rectangular crack on the stress, the electric displacement and magnetic flux intensity factors in the piezoelectric/piezomagnetic composite materials were analyzed.     

Non-local theory solution of two collinear mode-I cracks in piezoelectric materials

In this paper, the basic solution of two collinear cracks in a piezoelectric material plane subjected to a uniform tension loading is investigated by means of the non-local theory. Through the Fourier transform, the problem is solved with the help of two pairs of integral equations, in which the unknown variables are the jumps of displacements across the crack surfaces. To solve the integral equations, the jumps of displacements across the crack surfaces are directly expanded in a series of Jacobi polynomials. Numerical examples are provided to show the effects of the interaction of two cracks, the materials constants and the lattice parameter on the stress field and the electric displacement field near crack tips. Unlike the classical elasticity solution, it is found that no stress and electric displacement singularities are present at crack tips. The non-local elastic solutions yield a finite hoop stress at the crack tip, thus allowing us to using the maximum stress as a fracture criterion in piezoelectric materials.     

Piezoelectric beams under small strains but large displacements and rotations

Small strains are consistently incorporated into a model to describe the behavior of piezoelectric beams subjected to large displacements and rotations. While the displacement is assumed to vary in accordance with the Timoshenko assumption, the electric potential has linear variation through each piezoelectric layer thickness. The strong geometric nonlinear effect on the beam electroelastic response is illustrated by static problems of cantilever beams with tip loads and distributed sensing or actuation. The present work seems to be the first to obtain analytical solutions for beams under large displacements and rotations with piezoelectric sensors. One believes that the quality of such solutions can be valuable to validate results predicted by approximate methods.     

含椭圆孔或裂纹压电介质平面问题的基本解

应用复变函数的方法，并基于精确的电边界条件，导出了含一椭圆孔或裂纹的横观各向同性压电体在任意集中力和集中电荷作用下的复变函数解，即Ｃｒｅｎ函数解·叠加该解，得到了裂纹表面作用任意集中载荷或分布载荷时的一般解·这些解不但澄清了从前文献中一些不合理的结果，同时也为应用边界元法求解更复杂的压电介质断裂力学问题提供了基本解·     

A moving thermal dielectric crack in piezoelectric ceramics with a shearing force applied on its surface

This article conducts an exact analysis of a thermal dielectric crack moving in piezoelectric materials. Self-generating thermal and electric loadings by the crack interior are exerted on the crack surfaces as well as various external loadings including a shearing force. Fundamental solutions of the thermal and electro-elastic coupling fields are given by determining a temperature function and a harmonic function with eigenvalues properties due to material properties considered. Analytical expressions are obtained benefiting evaluation of key parameters. Numerical analysis is done and some interesting observations are found. There is a critical crack velocity within and beyond which the electric loading exerts different influences on the thermal flux of crack interior and the thermal stress intensity factor.