A study of the shielding gas influence on the laser beam welding of AA5083 aluminium alloys by in-process spectroscopic investigation

In laser welding, the shielding gas is commonly used to stabilize the welding process, to improve welded joints features and to protect the welded seam against oxidization. Besides the type of shielding gas used, the nozzle parameters play an essential role. In fact, the chemical composition of the shielding gas and the flow geometry are key factors limiting the size of the plasma plume and its contamination by the surrounding atmosphere, and affecting the final quality of the welded joints.In this work, we present an experimental study on the complex physical phenomena occurring during the interaction between the plasma plume, the laser beam and the shielding gas by using an in-process spectroscopic investigation of the plasma plume characteristics under different operating conditions. A correlation was found between the spectral features and the formation of oxide layers on the surface of the welding seam, caused by defective gas shielding and by the vaporization of alloying elements. Experimental results have given useful indications for the development of innovative welding nozzle for application in laser welding of aluminium alloys.     

A study on shielding gas contamination in laser welding of non-ferrous alloys

Laser welding of non-ferrous alloys is a high-productivity and cost-effective joining technology, which gained an undoubted interest especially in aerospace, chemical and medical industry, where high strength and corrosion resistant mechanical parts are required. Unfortunately some of the most used non-ferrous alloys are highly reactive with respect to the components of the environmental atmosphere: oxygen, nitrogen, hydrogen and humidity. This reactivity leads to the formation of porosities and to oxides and nitrides inclusion, which are responsible for a decrease of ductility and strength in welded joints.According to this a good shielding technique of the weld pool is of primary importance in order to obtain sound beads and reliable manufacturings. This paper deals with the opportunity of simulating the shielding gas behavior by means of Computational Fluid Dynamics software in order to understand the relationship among the outlet position, the shielding gas type and its flow rate.A simulation activity was carried out in order to evaluate the behavior of shielding gas concentration surrounding the weld pool. The simulated welding environment was simplified without considering the presence and the effect of the plasma plume. The main results concern the shielding gas contamination prediction with respect to the distance from the beam-material interaction zone.     

Spectral diagnostics of a vapor-plasma plume produced during welding with a high-power ytterbium fiber laser

We have conducted spectroscopic studies of the welding plasma formed in the process of welding with an ytterbium fiber laser delivering output power of up to 20 kW. The influence of shielding gases (Ar, He) on different parts of the welding plume is investigated. The absorption coefficient of the laser radiation by the welding-plume plasma is estimated. Scattering of 532-nm probe radiation from particles of the condensed metal vapor within the caustic of a high-power fiber laser beam is measured. Based on the obtained results, conclusions are made on the influence of the plasma formation and metal vapor condensation on the radiation of the high-power fiber laser and the stability of the welding process.     

Research on laser welding of high-strength galvanized automobile steel sheets

The paper presented some useful results of deep-penetration laser welding of high-strength galvanized steel sheets, which had been carried out by a self-made CO₂ laser unit with maximum power output of 1.5 kW. The workpieces of high-strength galvanized automobile steels with thickness of 1.5 mm were butt-welded with argon as the shielding gas. The effects of such factors as laser power, welding speed, focal position, shielding gas and zinc vaporization on the quality of welds are investigated. With the processing parameters optimized and the proper shielding gas used in both coaxial and side-blow direction, most of the defects, such as pores, cracks and softening in HAZ, can be avoided in laser welding joints. The microstructure, the hardness distribution and the elemental distribution in the welding joints can be changed due to laser heating and recrystallization. In order to determine the mechanical properties of the welding joints, the static tensile strength was tested. Experimental results indicated that both the strength and microhardness of welding joints were higher than those of the base metal. Consequently, the welding quality is reliable for manufacturing of automobile bodies.     

Gas protection optimization during Nd:YAG laser welding

Many laser processes, such as welding or surface treatments are associated with an undesired phenomenon, which is oxidation. The solution commonly employed to solve this problem approaches the shielding gas and/or the shielding gas device. What we propose in this paper is a methodology with the goal to optimize the protection gas device design as well as the gas flow in the case of laser welding and surface treatments. The pressure created by the gas flow on the sample surface is recorded and analysed together with the operating parameters influence in order to reach the objectives. The nozzle system designed and presented below assures the protection against material oxidation using minimal gas flow rates and increases the welding penetration in the case of high-power Nd:YAG laser welding.     

盘型激光焊金属蒸汽特征色调-色饱和度-亮度分析法研究

对于大功率盘型激光焊,金属焊件表面在激光束辐射下强烈汽化并形成等离子体状的金属蒸汽羽状物. 该金属蒸汽羽状物可逆向激光束传输,对激光有明显的屏蔽作用, 降低激光辐射至焊件的能量密度,影响焊接效率和质量. 因此研究金属蒸汽特征变化规律及其与焊接质量之间的关联 ,可实现由金属蒸汽特征实时监测激光焊接状态. 以10 kW大功率盘型连续激光焊接304不锈钢钢板为试验对象, 应用高速摄像机摄取金属蒸汽动态图像,将其转换至色调-色饱和度-亮度空间, 提取金属蒸汽面积、激光束受影响路径长度等相关特征量, 以焊缝熔宽的变化作为衡量焊接状态稳定性的参数. 通过金属蒸汽特征值的均值统计和方差分析,试验证明根据金属蒸汽面积和激光束受影响路径长度等金属蒸汽特征可有效地反映熔宽质量, 从而对焊接状况做出动态评估.     

Effect of magnetic field on plasma control during CO2 laser welding

During high power CO₂ laser beam welding, the plasma above the keyhole has a shielding effect that it not only absorbs part of the laser energy but also defocuses the laser beam. As a result, the welding efficiency and the aspect ratio of the welds are influenced. In order to reduce the effect of plasma, helium as a plasma control gas has been used successfully and effectively. However, the cost of helium in Southeast Asia is extremely high and therefore the production cost is significantly increased when helium is used as a continuous bleeding plasma control gas. To search for an alternative plasma control technique, feasibility in using magnetic effect as a control tool is explored in this paper. The influences of the magnetic field strength, laser power, welding speed, field direction and shielding gas (e.g. helium and argon) on the penetration depth and the width of bead were also investigated. Experimental results indicated that the magnetic field can influence the shielding effect of the plasma without using plasma control gas. It was found that at a suitable magnetic field strength the penetration depth was increased by about 7%, but no significant difference on the width of bead was found. Moreover, it was shown that the plasma control effect can be achieved at low magnetic field strength and the penetration depth can be increased significantly under argon atmosphere.     

Comparative analysis of the structure of metal in the arc and laser welding of cryogenic steel

A comparative study of the structure of joints produced by arc and laser welding with austenitic nitrogen-containing cryogenic Cr–Ni–Mn steel is performed. The dimensions of seams, the dispersity of the structure, and the microhardness in different zones of the welded joints are studied. It is shown that laser welding results in better structure-sensitive characteristics of welded joints than arc welding.     

保护条件变化的激光焊接等离子体光谱分析

保护气体在激光焊接过程中起重要的作用,保护条件的改变对焊接质量会有显著地影响。研究Nd∶YAG激光焊过程中保护条件的变化对激光等离子体的电子温度和电子密度等特征参数的影响,通过设计分步减小保护气流量的激光焊试验进行规律性研究,通过模拟实际可能发生的保护不良的激光焊试验进行验证性研究。在试验研究过程中,利用光谱仪采集激光焊接过程中产生的光致等离子体的光谱信息,通过相对光强法计算不同保护条件下等离子体的电子温度,通过斯塔克展宽机制计算不同保护条件下等离子体的电子密度。研究结果表明,保护条件的改变对Nd∶YAG激光焊接过程中产生的光致等离子体的电子温度和电子密度有重要影响,随着保护条件的变化,光致等离子体的电子温度和电子密度的平均值会发生变化,其波动幅度也会发生变化。在保护良好的条件下,等离子体的电子温度和电子密度均较小,且波动幅度也较小;在保护不良的条件下,等离子体的电子温度和电子密度都比较大,且波动幅度也比较大,这种变化的特征有助于对激光焊接过程进行质量监控。     

Optimization of laser butt welding parameters with multiple performance characteristics

This paper presents a study carried out on 3.5 kW cooled slab laser welding of 904 L super austenitic stainless steel. The joints have butts welded with different shielding gases, namely argon, helium and nitrogen, at a constant flow rate. Super austenitic stainless steel (SASS) normally contains high amount of Mo, Cr, Ni, N and Mn. The mechanical properties are controlled to obtain good welded joints. The quality of the joint is evaluated by studying the features of weld bead geometry, such as bead width (BW) and depth of penetration (DOP). In this paper, the tensile strength and bead profiles (BW and DOP) of laser welded butt joints made of AISI 904 L SASS are investigated. The Taguchi approach is used as a statistical design of experiment (DOE) technique for optimizing the selected welding parameters. Grey relational analysis and the desirability approach are applied to optimize the input parameters by considering multiple output variables simultaneously. Confirmation experiments have also been conducted for both of the analyses to validate the optimized parameters.     

Spectroscopic, energetic and metallographic investigations of the laser lap welding of AISI 304 using the response surface methodology

Spectroscopic signals originated by the laser-induced plasma optical emission have been simultaneously investigated together with energetic and metallographic analyses of CO₂ laser welded stainless steel lap joint, using the Response Surface Methodology. This statistical approach allowed us to study the influence of the laser beam power and the laser welding speed on the following response parameters: plasma plume electron temperature, joint penetration depth and melted area. A clear correlation has been found between all the investigated response parameters. The results have been shown to be consistent with quantitative considerations on the energy supplied to the workpiece as far as the laser power and travel speed were varied. The regression model obtained in this way could be a valuable starting point to develop a closed loop control of the weld penetration depth and the melted area in the investigated process window.     

Optimization of laser beam welding process parameters to attain maximum tensile strength in AZ31B magnesium alloy

An empirical relationship is developed to predict tensile strength of the laser beam welded AZ31B magnesium alloy by incorporating process parameters such as laser power, welding speed and focal position. The experiments were conducted based on a three factor, three level, central composite face centered design matrix with full replications technique. The empirical relationship can be used to predict the tensile strength of laser beam welded AZ31B magnesium alloy joints at 95% confidence level. The results indicate that the welding speed has the greatest influence on tensile strength, followed by laser power and focal position.     

CW/PW dual-beam YAG laser welding of steel/aluminum alloy sheets

The lap welding of JSC270CC steel and A6111-T4 aluminum alloys were carried out by a dual-beam YAG laser with the continuous wave (CW) and pulse wave (PW) modes. The microstructure of the welded joints were examined with SEM, EPMA while the properties were checked with microhardness tester and tensile testing machine. It was shown that the dual-beam laser welding can effectively reduce or avoid the formation of the blowholes in the welded joints. The PW laser beam penetrated the welding pool, leading to the root-shape structures with enhanced bonding strength at the weld interface. A 10 μm intermetallic compound (IMC) layer was generated at the interface. The shearing strength of lap joint was measured to be 128 MPa.     

Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels

The effects of shielding gas types and flow rates on CO₂ laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.     

Analysis of the correlation between plasma plume and keyhole behavior in laser metal welding for the modeling of the keyhole geometry

The process of laser metal welding is widely used in industry. Nevertheless, there is still a lack of complete process understanding and control. For analyzing the process we used two high-speed cameras. Therefore, we could image the plasma plume (which is directly accessible by a camera) and the keyhole (where most of the process instabilities occur) during laser welding isochronously. Applying different image processing steps we were able to find a correlation between those two process characteristics. Additionally we imaged the plasma plume from two directions and were able to calculate a volume with respect to the vaporized material the plasma plume carries. Due to these correlations we are able to conclude the keyhole stability from imaging the plasma plume and vice versa. We used the found correlation between the keyhole behavior and the plasma plume to explain the effect of changing laser power and feed rate on the keyhole geometry. Furthermore, we tried to outline the phenomena which have the biggest effect on the keyhole geometry during changes of feed rate and laser power.     

Influence of shielding gas pressure on welding characteristics in CO2 laser-MIG hybrid welding process

The droplet transfer behavior and weld characteristics have been investigated under different pressures of shielding gas in CO2 laser and metal inert/active gas (laser-MIG) hybrid welding process. The experimental results indicate that the inherent droplet transfer frequency and stable welding range of conventional MIG arc are changed due to the interaction between CO2 laser beam and MIG arc in laser-MIG hybrid welding process, and the shielding gas pressure has a crucial effect on welding characteristics. When the pressure of shielding gas is low in comparison with MIG welding, the frequency of droplet transfer decreases, and thedroplet transfer becomes unstable in laser-MIG hybrid welding. So the penetration depth decreases, which shows the characteristic of unstable hybrid welding. However, when the pressure of shielding gas increases to a critical value, the hybrid welding characteristic is changed from unstable hybrid welding to stablehybrid welding, and the frequency of droplet transfer and the penetration depth increase significantly.     

Parametric optimisation and microstructural analysis on high power Yb-fibre laser welding of Ti–6Al–4V

In this work thin sheets of Ti–6Al–4V were full penetration welded using a 5 kW fibre laser in order to evaluate the effectiveness of high power fibre laser as a welding processing tool for welding Ti–6Al–4V with the requirements of the aircraft industry and to determine the effect of welding parameters including laser power, welding speed and beam focal position on the weld microstructure, bead profile and weld quality. It involved establishing an understanding of the influence of welding parameters on microstructural change, welding defects, and the characteristics of heat affected zone (HAZ) and weld metal (WM) of fibre laser welded joints. The optimum range of welding parameters which produced welds without cracking and porosity were identified. The influence of the welding parameters on the weld joint heterogeneity was characterised by conducting detailed microstructural analysis.     

Optimal design for laser beam butt welding process parameter using artificial neural networks and genetic algorithm for super austenitic stainless steel

Laser welding input parameters play a very significant role in determining the quality of a weld joint. The joint quality can be defined in terms of properties such as weld bead geometry, mechanical properties and distortion. Therefore, mechanical properties should be controlled to obtain good welded joints. In this study, the weld bead geometry such as depth of penetration (DP), bead width (BW) and tensile strength (TS) of the laser welded butt joints made of AISI 904L super austenitic stainless steel were investigated. Full factorial design was used to carry out the experimental design. Artificial Neural networks (ANN) program was developed in MatLab software to establish the relationships between the laser welding input parameters like beam power, travel speed and focal position and the three responses DP, BW and TS in three different shielding gases (Argon, Helium and Nitrogen). The established models were used for optimizing the process parameters using Genetic Algorithm (GA). Optimum solutions for the three different gases and their respective responses were obtained. Confirmation experiment has also been conducted to validate the optimized parameters obtained from GA.     

A New Synthetical Model of High-Power Pulsed Laser Ablation

We develop a new synthetical model of high-power pulsed laser ablation, which considers the dynamic absorptance, vaporization, and plasma shielding. And the corresponding heat conduction equations with the initial and boundary conditions are given. The numerical solutions are obtained under the reasonable technical parameter conditions by taking YBa2CusO7 target for example. The space-dependence and time-dependence of temperature in target at a certain laser fluence are presented, then, the transmitted intensity through plasma plume, space-dependence of temperature and ablation rate for different laser fluences are significantly analyzed. As a result, the satisfactorily good agreement between our numerical results and experimental results indicates that the influences of the dynamic absorptance, vaporization, and plasma shielding cannot be neglected. Taking all the three mechanisms above simultaneously into account for the first time, we cause the present model to be more practical.     

A New Synthetical Model of High-Power Pulsed Laser Ablation

We develop a new synthetical model of high-power pulsed laser ablation, which considers the dynamic absorptance, vaporization, and plasma shielding. And the corresponding heat conduction equations with the initial and boundary conditions are given. The numerical solutions are obtained under the reasonable technical parameter conditions by taking YBa₂Cu₃O₇ target for example. The space-dependence and time-dependence of temperature in target at a certain laser fluence are presented, then, the transmitted intensity through plasma plume, space-dependence of temperature and ablation rate for different laser fluences are significantly analyzed. As a result, the satisfactorily good agreement between our numerical results and experimental results indicates that the influences of the dynamic absorptance, vaporization, and plasma shielding cannot be neglected. Taking all the three mechanisms above simultaneously into account for the first time, we cause the present model to be more practical.