关于"惯性秤"实验的思考

介绍了惯性秤的基本原理，分析了惯性秤不同放置情况的测量结果。     

运用"落体音叉"测量重力加速度

在高中物理的学习中有多种测量重力加速度的方法,如"滴水法测量重力加速度"、"利用单摆测量重力加速度"、"利用机械能守衡测量重力加速度"等等,本文介绍一种运用"落体音叉"测量重力加速度的方法,与同行商榷.     

建议"测不准"与"不确定"二词并用

量子力学作为物理学最基本的理论已经将近80年了．而在物理学家当中围绕量子力学却一直存在激烈的争论，这也是无可回避的事实．争论的根源，在于坐标与动量这一对观测量在量子力学中是不相容的，在原则上就不存在同时对这二者进行测量的实验装置．在一个测定了动量的态上去测坐标，得到的是一个概率分布；     

双"单电桥"测低电阻的两类方法

介绍用两个“单电桥”测量低电阻的甲、乙两类方法，并给出了计算待测电阻Ｒｘ的表达式。     

开展"专题研究"实施研究性教学

研究性教学是指学生在学习过程中要参与研究活动，即学生用以获取知识、领悟科学的思想观念，类似科学家研究自然和社会的态度与方法进行的各种研究性学习活动，包括观察、测量、制作、实验、假设和交流等．不难看出，大学研究性教学实质上是将科学领域的某些研究环节引入大学教学，使学生通过类似科学家的研究过程学习科学概念和科学规律的本质，培养科学研究思想、方法和能力的一种现代的教学方法．     

自制"磁感应强度的测量"原理演示装置

介绍了自制“磁感应强度的测量”原理的演示装置,演示了安培力的存在和测量的原理.     

"用板式电势差计测量电池的电动势和内阻"实验方案的改进

板式电势差计原理如图1所示．先将开关SG打向1，使用标准电池Es把电势差计的工作电流标准化后再将SG打向2，即可对0、2间所接的待测电池电动势Ex进行测量。     

双"单电桥"法测量低电阻中的实用技巧例举

主要介绍了双"单电桥"法测量低电阻的基本原理与双"单电桥"法测量低电阻的几种实用技巧.     

用于"萤火1号"火星轨道器的开环电测技术

中国首个火星探测器"萤火1号"计划于2011年和俄罗斯的火卫一采样探测器一道发射升空."萤火1号"将探测火星的空间环境,并验证深空导航测控与通信技术.与常规的火星探测任务不同,该探测器的轨道与位置测量主要利用天文甚长基线干涉测量技术、开环跟踪测量技术、差分单程测距测速技术、同波束干涉测量技术以及单程多普勒(Doppler)测速技术.     

用板式电位差计测干电池内阻时附加的标准电阻取值大小分析简

分析标准电阻取值大小对测量可能产生的影响。若标准电阻取值太大，测量线路的灵敏度将降低，同时标准电阻真实值相对额定值的差异对测量结果的影响也变大；若标准电阻取值太小，流过于电池的电流变大，于电池内部极化会使干电池内阻增大。实测结果也支持上述分析。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.