样条小波和Fourier变换联用技术在分析化学中的应用

探讨了样条小波和Fourier变换方法的算法及应用特征,将两种方法联合使用,设计出了一种新型的数字滤波器,使两种方法互相取长补短,使各自的优势能得到充分发挥.优选了处理低信噪比分析化学信号的滤波参数.不仅能使结果峰形高度保真,克服样条小波分析方法的不足,而且可对高噪声信号进行处理.     

Using a digital camera and computer data processing for the determination of organic substances with diazotized polyurethane foams

The possibility of using a digital camera and computer software for the estimation of the color intensity of polymeric azo compounds synthesized by the reaction of the azo coupling of diazotized polyurethane foams (PUFs) with different organic substances was studied. The method is based on photographing colored polyurethane foams with a digital camera followed by the computer processing of the color images. It was found that calibration equations are described by a descending exponent of the first order. The advantages of the proposed method are its high sensitivity due to the chemisorption concentration of substances, simplicity, and low cost. In combination with a high efficiency, compactness, and the availability of digital cameras, this allows us to recommend it for field analysis. It is shown by the example azo coupling reactions involving diazotized PUF that, using digital cameras as detectors and computer data processing, one can determine substances with a sensitivity equal to that of diffuse reflection spectroscopy.     

Spline wavelet analysis for voltammetric signals

Application of wavelet multifrequency channel decomposition (WMCD) in electroanalytical chemistry is presented in this paper. A new approach on this digital processing technique, to extract useful information from high noise signals in voltammetry, is described in detail. The method of constructing a model of B-spline WMCD and its application with 2nd, 3rd and 4th order B-spline in the linear scan voltammetry are thoroughly discussed and several results obtained. If the suitable optimal wavelet basis and frequency scale value are selected, the absolute values of the peak relative errors are less than 2% when the signal-to-noise ratio (S/N) is greater than 0.2, and the absolute values of the peak potential relative errors are less than 12% when S/N is greater than 0.3. The processed results of experimental data with high noise are also satisfactory. The whole computation is simple and needs shorter time than other signal processing methods.     

可逆,准可逆和不可逆表面反应循环伏安法的数字模拟

用数字模拟的方法研究了可逆、准可逆和不可逆表面反应的循环伏安法响应,与理论推导结果相一致,但数字模拟提供了更灵活、方便、通用性更强的研究表面反应机理的手段,本文建立了有关的数字模型,给出了不同动力学参数条件下的电流-电位关系曲线,讨论了动力学参数对电流函数的影响以及用于测定这些参数的方法。     

Zur Steuerung eines Eisenhüttenlaboratoriums durch Digitalrechner

A combination of instrumental systems for issuing measured data with a digital computer for automatic on-line data processing is described. The functions of the computer comprise data conversion, calibration checking of the instruments and recording of the results. Operation of the calibration checking and efficiency of the system are discussed.     

Data Acquisition and Processing for High Speed Liquid Chromatography

Abstract

The effect of sampling rate and digital smoothing on data acquired from high speed liquid chromatography (HSLC) is explored. The amount of data required per peak is determined from the precision of area, height, and retention time measurements. The correct sampling rate is related mathematically to column characteristics and operating conditions. The effect of a modified moving average digital smoothing routine on peak width and height is investigated. Digital smoothing functions are shown to behave similarly to analog noise filters. The merits of raw data storage and post analysis processing are discussed in light of the short analysis times in HSLC and the decreased cost of computer memory.     

In situ AFM study of sorbed humic acid colloids at different pH

Humic acid colloids adsorbed on the basal plane of cleaved muscovite are investigated under in situ conditions by non-contact mode atomic force microscopy (AFM) in liquid (also called fluid tapping-mode AFM). Structures are found to be of nanometer scale, consisting of flat particles (8–13 nm in diameter), aggregates of particles (20–100 nm), chain-like assemblies, networks and torus-like structures. In contrast to former investigations colloids are investigated in aquatic solution and structures are not influenced by sample preparation. Nanostructure, surface coverage and particle sizes are found to depend on solution pH. Humic colloids can be distinguished from surface roughness and background noise by image processing. Furthermore, an approach to quantify the surface coverage is discussed. Therefore, non-contact mode AFM in liquid is shown to be a powerful method to study the interaction of colloids at solid–liquid interfaces.     

高分子表面改性剂的分子设计

简述高分子表面改性剂对聚合物进行表面改性的微观模型，讨论了高分子表面改性剂的分子结构、分子量以及加工工艺条件对表面改性效果的影响，提出了高分子表面改剂的分子设计原则。     

Application of electrochemical impedance spectroscopy in characterization of structural changes of printing plates

The porous structure of the aluminium oxide surface of lithographic printing plate (PP) has a most significant influence on the quality of the imprints. This study presents the results of application of electrochemical impedance spectroscopy (EIS) in characterization of PPs' porous structures and their changes during chemical processing. Two common PP types—thermal and conventional—were investigated. The influence of the processing solution’s working age on topographical changes of PP surface and associated change in the impedance spectra are investigated and discussed. The equivalent electrical circuit models reproducing the observed EIS spectra are proposed. Based on these models two mechanisms of surface’s topography changes responsible for degradation of PP performance due to the processing are identified and discussed.     

印刷有机数字电路及应用

印刷有机电子技术是基于印刷原理的有机电子器件制造技术,是指将有机电子材料配制成功能性油墨,用印刷方式来制造电子器件与系统的方法,其发展涉及到材料化学、微电子学等多个学科方面的知识。其独特的制造方式和器件形态具有柔性、低成本、大面积制造等优势,并且与传统硅基电子器件在应用场合上形成了互补,在生物传感、电子皮肤、柔性显示等领域展示出优势。为了及时跟进这一快速发展的领域,对领域的发展有宏观的把握,本文从印刷技术和电路系统的角度进行了全面概述,介绍了喷墨打印、丝网印刷和转印印刷等印刷技术和基于印刷技术制备的有机数字电路(反相器、与非门、环形振荡器、D触发器),以及实现功能化的印刷电子应用(RFID、电子皮肤、OLED显示驱动背板等);最后,对本领域目前存在的问题和未来发展方向做了简要探讨。     

Numerical reconstruction of digital holograms for the study of pitting dynamic processes of the X70 carbon steel in NaCl solution

In this paper, a new image processing method to reconstruct digital holograms is proposed. After the digital holograms were recorded in situ during the electrochemical experiment, three-dimensional images were numerically reconstructed to study pitting dynamic processes of the X70 carbon steel in neutral solution containing chloride ions. Compared with the digital holograms, the reconstructed images can capture subtle changes more readily, therefore, more revealing. The radii of the pits were different, for they were induced at different times and propagated at different rates. It is expected that this method can be used extensively in studying the electrochemical dynamic processes at the electrode/electrolyte interface.     

Biofunctionalization of electrowetting-on-dielectric digital microfluidic chips for miniaturized cell-based applications

In this paper we report on the controlled biofunctionalization of the hydrophobic layer of electrowetting-on-dielectric (EWOD) based microfluidic chips with the aim to execute (adherent) cell-based assays. The biofunctionalization technique involves a dry lift-off method with an easy to remove Parylene-C mask and allows the creation of spatially controlled micropatches of biomolecules in the Teflon-AF(?) layer of the chip. Compared to conventional methods, this method (i) is fully biocompatible; and (ii) leaves the hydrophobicity of the chip surface unaffected by the fabrication process, which is a crucial feature for digital microfluidic chips. In addition, full control of the geometry and the dimensions of the micropatches is achieved, allowing cells to be arrayed as cell clusters or as single cells on the digital microfluidic chip surface. The dry Parylene-C lift-off technique proves to have great potential for precise biofunctionalization of digital microfluidic chips, and can enhance their use for heterogeneous bio-assays that are of interest in various biomedical applications.     

Development of Microchip Electrophoresis and Its Applications in Ion Detection

Microchip electrophoresis is emerging as a highly promising method due to its portability and fast analysis with a minimum number of analytes. In this review, recent developments in microchip electrophoresis were described with discussions on the structures, materials, processing technologies, surface modification, experimental methods, and applications in ion detection. The existing issues and prospects of future studies were discussed as well.     

数码比色法测定环境及生物样品中的氰化物浓度

在传统氰化物检测方法的基础上,提出了一种新的方法—数码比色法。在一定条件下,苦味酸与氰化物生成黄色化合物,用数码相机对显色溶液拍照,通过数码比色,进行灰度处理,照片的三原色值与氰化物的浓度成线性关系,可以直接分析出其氰化物的浓度。对唾液样品测定,其回收率为98.18%,对照品测定的相对标准偏差RSD为1.5%。研究结果表明,数码比色法具有准确度和精密度都比较理想,方便快速、环境友好等特点。     

计算机辅助一清片径向展开薄层色谱定性与定量方法初探

径向薄层色谱法（RTLC）是一种将样品呈圆形或环状点样,然后将展开剂从中心向外沿径向输送的薄层色谱方法。在一定的展开距离内,RTLC是一种分离快速、扩散小、不拖尾的高效分离和半制备方法。目前关于RTLC分离的报道较多,但对RTLC定性和定量的报道较少。该文采用自编程方式结合图像处理软件,实现RTLC图像数字化处理,形成RTLC数字化图谱,并对RTLC进行定性与定量方法学验证,建立了一清片RTLC定性与定量方法。辅助计算机技术,对一清片径向展开薄层色谱定性与定量方法进行初探。结果表明,该方法用于RTLC定性的可靠度较好,但用于RTLC的定量,仍有不足之处,这可能与实验环境条件等有关。通过搭载更好的分离和数据采集设备,RTLC会有适合的用武之地。计算机图像处理和自编程方法的结合给了RTLC和其他一些分析相关的技术广阔的发展前景。相信未来在计算机技术的辅助下,薄层色谱技术会迈上一个新的台阶。     

Optimal estimation of intensity of noisy peaks by matched filtering with application to chromatography : Part 1. General introduction and theoretical evaluations

The digital filter described provides optimal enhancement of the signal-to-noise ratio by using prior information about peak shape and type of noise. The filter, based onthe matched-filter principle, is applied to chromatographic data, but is also suitable for optimal processing of similar noisy signals. The current implementation of the filter permits the specific reduction of different types of noise. Several theoretical aspects concerning the interpretation and use of this advanced filter are discussed. Some calculations on peaks with Gaussian and Gamma distribution shape are given.     

Theories and Applications of Mixed Quantum-Classical Non-adiabatic Dynamics

Electronically non-adiabatic processes are essential parts of photochemical process, collisions of excited species, electron transfer processes, and quantum information processing. Various non-adiabatic dynamics methods and their numerical implementation have been developed in the last decades. This review summarizes the most significant development of mixed quantum-classical methods and their applications which mainly include the Liouville equation, Ehrenfest mean-field, trajectory surface hopping, and multiple spawning methods. The recently developed quantum trajectory mean-field method that accounts for the decoherence corrections in a parameter-free fashion is discussed in more detail.     

基于影像处理的子孔径拼接算法研究

大口径天文望远镜传递的影像信息是人们认识与了解宇宙的重要手段,因此大口径望远镜面形质量的好坏决定了系统的分辨率。本文介绍了检测大口径光学元件面形的一种方法,即子孔径拼接检测方法。首先分别检测元件各个子孔径的面形数据,最后通过影像处理算法复原面形信息。利用MATLAB软件进行了子孔径拼接算法的仿真,复原抛物面元件的面形。提出了利用数字影像处理和立体视觉影像的方法提高检测面形的精确度。展望了拼接后得到的面形的影像处理算法仍需考虑的因素,对后续研究提出新的挑战。     

非晶态半导体中的分形结构

非晶态半导体硅(α-Si:H)薄膜作为新型的光电子材料,近年来备受关注,发展迅速。但其晶化机理有待深入探索。用分形理论所作的分析表明,在一定条件下,a-Si:H薄膜中形成的微结构具有分形性质。本文计算了分维值,讨论了a-Si:H薄膜结构弛豫(相变)与分形结构形成的关联,和非晶硅薄膜可能的晶化机理。并研究了在高真空中用透射电子显微镜(TEM)及动态方法跟踪观测a-Si:H薄膜原位(in situ)退火过程中发生的晶化现象,获得晶化形貌的显微图像。利用图像处理技术对显微像进行光电转换,A/D转换和数字计算,得到a-Si:H薄膜样品在不同退火条件下,显微象的Sandbox关系曲线。从而获得薄膜中形成不同分形结构的分维。文中给出应用分形理论对非晶态半导体薄膜进行分析的技术细节。