Characterization of stainless steel electrode modified by a thin film of polyaniline containing pt particles and its electrocatalytic activity for methanol oxidation

The catalytic behavior of stainless steel (SS) electrode modified by a thin film of polyaniline (PANI) containing platinum particles was studied for electrooxidation of methanol and compared with a platinated Pt/PANI electrode in acidic aqueous solution. Cyclic voltammetry (CV), chronoamperometry, CO stripping techniques were used to investigate electrochemical properties and electrocatalytic activity of SS/PANI/Pt and Pt/PANI/Pt electrodes. The morphology and particle size of Pt catalysts were characterized by Transmission Electron Microscopy (TEM) measurement. The effects of various parameters such as thickness of polymer film, medium temperature and stability of the modified electrodes on methanol oxidation were also investigated. The results indicated that the modified SS electrode exhibited a considerably high electrocatalytic activity on the methanol oxidation as well as the modified Pt electrode.     

Waveguide surface plasmon resonance studies of surface reactions on gold electrodes

We describe the fabrication and characterisation of gold-coated graded index channel waveguide sensors designed for simultaneous electrochemical and surface plasmon resonance studies. The active sensing electrode area is a thin gold film between 0.5 and 5 mm in length and 200 microm wide deposited on top of a 3 microm wide waveguide which forms one arm of a Y-junction while the other arm of the Y-junction serves as a reference. Using these devices we have measured simultaneously the changes in transmittance through the device whilst carrying out cyclic voltammetry in either sulfuric or perchloric acid solution or during the deposition of an UPD layer of copper at the gold surface. In all cases we obtain stable and reproducible results which demonstrate the very high sensitivity of the devices to sub-monolayer changes occurring at the gold electrode surface. The response of these integrated optoelectrochemical devices is discussed in terms of a numerical model for the propagation of light within the waveguide structure.     

Amperometric glucose biosensor based on electrodeposition of platinum nanoparticles onto covalently immobilized carbon nanotube electrode

A new amperometric biosensor for glucose was developed based on adsorption of glucose oxidase (GOx) at the gold and platinum nanoparticles-modified carbon nanotube (CNT) electrode. CNTs were covalently immobilized on gold electrode via carbodiimide chemistry by forming amide linkages between carboxylic acid groups on the CNTs and amine residues of cysteamine self-assembled monolayer (SAM). The fabricated GOx/Au_nano/Pt_nano/CNT electrode was covered with a thin layer of Nafion to avoid the loss of GOx in determination and to improve the anti-interferent ability. The immobilization of CNTs on the gold electrode was characterized by quartz crystal microbalance technique. The morphologies of the CNT/gold and Pt_nano/CNT/gold electrodes have been investigated by scanning electron microscopy (SEM), and the electrochemical performance of the gold, CNT/gold, Pt_nano/gold and Pt_nano/CNT/gold electrodes has also been studied by amperometric method. In addition, effects of electrodeposition time of Pt nanoparticles, pH value, applied potential and electroactive interferents on the amperometric response of the sensor were discussed.

The enzyme electrode exhibited excellent electrocatalytic activity and rapid response for glucose in the absence of a mediator. The linear range was from 0.5 to 17.5 mM with correction coefficient of 0.996. The biosensor had good reproducibility and stability for the determination of glucose.     

Electrochemical/electrospray mass spectrometric studies of I- and SCN- at gold and platinum electrodes: direct detection of (SCN)3-

Results on the electrochemistry of I- and SCN- at gold and platinum electrodes using an electrochemical cell coupled to an electrospray mass spectrometer are reported. We demonstrate that our apparatus is capable of these very challenging electrochemical/electrospray experiments and that B(C6H5)4- is a suitable internal standard for negative-ion studies in acetonitrile. With I- at a platinum electrode, we observe well-behaved oxidation to I3-. Experiments on I- at gold electrodes are more complex, showing AuI2- as well as I3-. The AuI2- mass spectrometric ion intensity varies in a complex way throughout the applied electrochemical voltage range studied; we propose that this variation involves the adsorption of I- on the gold electrode surface. In experiments on SCN- from (C4H9)4NSCN at gold electrodes, we observe Au(SCN)2-. Finally, at platinum electrodes, we directly observe (SCN)3-, a species analogous to I3- and (CN)3- that has been previously postulated but unverified. This important finding was confirmed by the isotope pattern and demonstrates the stability of the anion.     

Photochromism and electrochemistry of a dithienylcyclopentene electroactive polymer

A bifunctional substituted dithienylcyclopentene photochromic switch bearing electropolymerisable methoxystyryl units, which enable immobilization of the photochromic unit on conducting substrates, is reported. The spectroscopic, electrochemical, and photochemical properties of a monomer in solution are compared with those of the polymer formed through oxidative electropolymerization. The electroactive polymer films prepared on gold, platinum, glassy carbon, and indium titanium oxide (ITO) electrodes were characterized by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The thickness of the films formed is found to be limited to several monolayer equivalents. The photochromic properties and stability of the polymer films have been investigated by UV/vis spectroscopy, electrochemistry, and XPS. Although the films are electrochemically and photochemically stable, their mechanical stability with respect to adhesion to the electrode was found to be sensitive to both the solvent and the electrode material employed, with more apolar solvents, glassy carbon, and ITO electrodes providing good adhesion of the polymer film. The polymer film is formed consistently as a thin film and can be switched both optically and electrochemically between the open and closed state of the photochromic dithienylethene moiety.     

Evaporation induced self-assembly of templated silica and organosilica thin films on various electrode surfaces

A new one-step method is reported for the deposition of hybrid mesoporous thin films on various electrode surfaces (gold, platinum, glassy carbon). Deposition was achieved by spin-coating sol–gel mixtures in the presence of a surfactant template to get mesostructured thin layers on the various conducting substrates. Film formation occurred by evaporation induced self-assembly (EISA) involving the hydrolysis and (co)condensation of silane and/or organosilane precursors on the electrode surface. Extraction of the surfactant from the ordered mesoporous films led to a large increase of mass transport rates into the materials and imparted high accessibility to the organic moieties in case of functionalized mesoporous overlayers. The electrochemical properties of the film-modified electrodes have been studied by cyclic voltammetry (CV), and also via the chemical accumulation of mercury ions prior to their stripping analysis by differential pulse voltammetry (i.e. for thiol-functionalized thin films). Some evidences to support the formation of self-assembled monolayers (SAMs) on electrodes, have been also discussed. The formation of well-adhering mesoporous thin films on solid electrode surfaces is expected to have a high impact on the development of new electrochemical sensors.     

Flower-like self-assembly of gold nanoparticles for highly sensitive electrochemical detection of chromium(VI)

We report here the fabrication of a flower-like self-assembly of gold nanoparticles (AuNPs) on a glassy carbon electrode (GCE) as a highly sensitive platform for ultratrace Cr(VI) detection. Two AuNP layers are used in the current approach, in which the first is electroplated on the GCE surface as anchors for binding to an overcoated thiol sol–gel film derived from 3-mercaptopropyltrimethoxysilane (MPTS). The second AuNP layer is then self-assembled on the surface of the sol–gel film, forming flower-like gold nanoelectrodes enlarging the electrode surface. When functionalized by a thiol pyridinium, the fabricated electrode displays a well-defined peak for selective Cr(VI) reduction with an unusually large, linear concentration range of 10–1200 ng L⁻¹ and a low detection limit of 2.9 ng L⁻¹. In comparison to previous approaches using MPTS and AuNPs on Au electrodes, the current work expands the use of AuNPs to the GCE. Subsequent functionalization of the secondary AuNPs by a thiol pyridinium and adsorption/preconcentration of Cr(VI) lead to the unusually large detection range and high sensitivity. The stepwise preparation of the electrode has been characterized by electrochemical impedance spectroscopy (EIS), scanning electronic microscopy (SEM), and IR. The newly designed electrode exhibits good stability, and has been successfully employed to measure chromium in a pre-treated blood sample. The method demonstrates acceptable fabrication reproducibility and accuracy.     

集成化金膜阵列电极的制作研究

以聚乙烯不干胶掩膜版法结合金属溅射沉积技术在FR-4玻璃纤维版上制作了由6个金膜工作电极(1 mm×2 mm)、1个大面积金膜对电极(2 mm×13 mm)和1个厚膜Ag/AgCl参比电极构成的集成化金膜阵列电极系统,并利用电化学手段对阵列电极系统进行了考察。研究结果表明,K3Fe(CN)6在厚膜Ag/AgCl/1.0 mol/L NaCl参比电极上的式电位与商业Ag/AgCl/3.0 mol/L NaCl参比电极相差0.067 V;参比电极放置1个月后,测量电位未发生明显变化。利用扫描电化学显微镜对工作电极表面平整度进行考察,结果表明工作电极表面具有较好的平整度。通过测量H2SO4还原峰面积评价了工作电极电化学面积的批内、批间一致性;通过K3Fe(CN)6在电极上的Ipa/Ipc比值评价了工作电极电化学特性的批内、批间一致性。结果表明,阵列电极面积和电化学特性具有良好的批内和批间一致性。对集成化金膜阵列电极系统的研究结果表明,聚乙烯不干胶掩膜版法结合金属溅射沉积技术制作的阵列电极能够满足电化学电极的要求,可作为电化学生物传感器的基础电极。     

巯基化改性壳聚糖在电化学生物传感器制备中的应用

以壳聚糖、N-乙酰-L-半胱氨酸(NAC)为原料,以1-羟基苯并三唑(HOBt)和1-乙基-3-(3-二甲基胺丙基)碳化二亚胺盐酸盐(EDAC)为缩合剂,合成功能化壳聚糖衍生物巯基壳聚糖(CHS-NAC).用红外光谱(FTIR)、核磁共振(1H-NMR)及X射线衍射(XRD)对其结构进行表征,用Ellman’s试剂通过标准曲线法测得巯基含量.利用CHS-NAC的黏附性,通过层层吸附的方法将CHS-NAC、纳米金及细胞色素c分别修饰到玻碳电极(GC)上,通过扫描电子显微镜(SEM)对修饰电极表面的形貌进行了观察,采用循环伏安和电化学阻抗研究了不同修饰膜电极的电化学行为,及扫描速率对细胞色素c修饰电极的影响,并开展了对过氧化氢的电催化分析.实验结果表明,CHS-NAC能高效地将纳米金及细胞色素c固定在电极表面,并能有效发挥纳米金辅助转移电子及细胞色素c对过氧化氢催化的能力.     

Prussian Blue Modified Submicron Structured Gold Electrodes for Amperometric Hydrogen Peroxide Sensing

In this work, we present a simple and effective approach for fabricating sub‐micron structured gold (SM−Au) electrodes by chemically etching the magnetron co‐sputtered gold film in KI solution for certain time. Such electrodes with a large surface area to volume ratio were used as the matrix for electrochemical deposition of Prussian blue (PB) to develop an electrochemical hydrogen peroxide sensor. Experimental characterization using scanning electron microscope and atomic force microscope shows that the thickness of PB layer on SM−Au electrode is around 140 nm, and is composited with cubic PB nanocrystals. The electrochemical performance of the designed sensor, studied using cyclic voltammograms and chronoamperometry methods, suggests that the sensor based on SM−Au/PB electrode presents the direct electron transfer of PB particle towards SM−Au film, and exhibits fast response, wide linearity, low detection limit and high stability. Under the optimized conditions, the sensitivity of the developed sensor for the detection of H₂O₂ reaches the value of 512 mA cm⁻² M⁻¹ with a linear range from 1 μM to 4.5 mM.     

Spectroelectrochemical Evaluation of a ZnO Optically Transparent Electrode Prepared by the Spin‐spray Technique

We present a novel zinc oxide (ZnO) optically transparent electrode (OTE) prepared by the spin‐spray technique for spectroelectrochemistry. The spin‐spray technique can deposit ZnO film at a low cost, high rate deposition, and at a low temperature (<100 °C) in a single step. This new technique provides good optical transparency and electrical conductivity for ZnO. The electrochemical and spectroelectrochemical properties of the ZnO electrode were investigated for varying thicknesses of ZnO using methylene blue as a redox indicator. A ZnO OTE chip that includes three electrodes on a glass chip was developed for thin‐layer spectroelectrochemistry. Moreover, the ZnO films were successfully applied in an electrochemical‐localized surface plasmon resonance (LSPR) method for methylene blue detection by using them as a transparent conducting substrate for loading gold nanoparticles.     

The influence of promoter and of electrode material on the cyclic voltammetry of Pisum sativum plastocyanin

The reversible cyclic voltammetry of pea plastocyanin (Pisum sativum) was studied with a wide range of electrodes: edge-oriented pyrolytic graphite (PGE), glassy carbon (GCE), gold (Au) and platinum (Pt) electrodes. Plastocyanin was coated onto the electrode surface by exploiting the electrostatic interaction between the negatively charged protein and a wide range of positively charged promoters. The effect of the redox response with an extended range of promoters, including poly-L-lysine, polymyxin B, neomycin, tobramycin, geneticin, spermine and spermidine, were included in this study. The resulting cyclic voltammograms reveal that the observed midpoint potential for plastocyanin can be shifted significantly depending on the choice of promoter. The stability of the negatively charged plastocyanin-promoter layer on an electrode was gauged by the rate of bulk diffusion of the protein from the immobilised film into the solution. Reversible cyclic voltammograms were obtained using edge-oriented pyrolytic graphite (PGE) and glassy carbon electrodes (GCE) with all promoters; however, platinum and gold electrodes were unable to sustain a defined redox response. The combination of pyrolytic graphite electrode/poly-L-lysine/plastocyanin was found to be the most stable combination, with a redox response which remained well defined in solution for more than 1 h at pH 7.0. The midpoint potentials obtained in this manner differed between the two graphite electrodes PGE and GCE using poly-L-lysine as the promoter. This effect was in addition to the expected pH dependence of the midpoint potential for plastocyanin and the results indicated that the pK(a) for plastocyanin on PGE was 4.94 compared to that on GCE of 4.66. It is concluded that both the electrode material and the nature of the promoter can influence the position of the redox potentials for proteins measured in vitro. This study extends the range of biogenic promoters used in combination with electrode materials. Thus, we can begin to develop a more comprehensive understanding of electrode-protein interactions and draw conclusions as to metalloprotein function, in vivo. To support these studies, we have sought information as to the nature of the electrode/promoter/protein interaction using scanning tunneling microscopy (STM) to study both the promoter and the plastocyanin protein on a gold surface.     

Effect of the iridium oxide thin film on the electrochemical activity of platinum nanoparticles

The influence of the iridium oxide thin film on the electrocatalytic properties of platinum nanoparticles was investigated using the electro-oxidation of methanol and CO as a probe. The presence of the IrO(2) thin film leads to the homogeneous dispersion of Pt nanoparticles. For comparison, polycrystalline platinum and Pt nanoparticles dispersed on a Ti substrate in the absence of an IrO(2) layer (Ti/Pt) were also investigated in this study. Inverted and enhanced CO bipolar peaks were observed using an in situ electrochemical Fourier transform infrared technique during the methanol oxidation on the Pt nanoparticles dispersed on a Ti substrate. Electrochemical impedance studies showed that the charge transfer resistance was significantly lower for the Ti/IrO(2)/Pt electrode compared with that of the massive Pt and Ti/Pt nanoparticles. The presence of the IrO(2) thin film not only greatly increases the active surface area but also promotes CO oxidation at a much lower electrode potential, thus, significantly enhancing the electrocatalytic activity of Pt nanoparticles toward methanol electro-oxidation.     

A hydrodynamic voltammetric study of the ferricyanide/ferrocyanide system with convective electrodes of platinum,gold, glassy carbon,carbon film,and boron carbide

Hydrodynamic voltammetry employing empirically determined mass transport coefficients is used to determine heterogeneous rate constants and transport coefficients for the ferricyanide/ferrocyanide system in 0.1 M phosphate buffer and other supporting electrolytes with turbulent tubular and rotated disk electrodes of platinum, gold, glassy carbon, carbon film, and boron carbide. Different kinetic parameters are obtained at the various electrode materials. For the platinum, gold, and boron carbide electrodes, the magnitudes of the rate parameters depend on scan direction. The nature of this hysteresis varies with the electrode material and is explained in terms of adsorbed oxide and ionic layers or other phenomena not described by simple double layer theory.     

Voltammetry of Formaldehyde at Mechanically Renewable Solid Electrodes

The electrochemical behavior of formaldehyde (CH₂O) at solid electrodes made of platinum, gold, silver, cobalt, nickel, copper, and graphite was studied. The working surface of the electrodes was renewed by cutting a thin layer (0.5 m) immediately in the test solution. It was found that, in alkaline solutions, CH₂O was oxidized at all electrodes other than cobalt and graphite ones while scanning the potential to the anode and cathode regions. The peaks of CH₂O oxidation at platinum and gold electrodes using potential scanning in the anode and cathode directions, as well as at nickel, copper, and silver electrodes using potential scanning in the anodic direction, are suitable for analytical purposes.     

Enhanced electrochemical activity of redox-labels in multi-layered protein films on indium tin oxide nanoparticle-based electrode

Facile electrical communication between redox-active labeling molecules and electrode is essential in the electrochemical detection of bio-affinity reactions. In this report, nanometer-sized indium tin oxide (ITO) particles were employed in the fabrication of porous thick film electrodes to enhance the otherwise impeded electrochemical activity of redox labels in multi-layered protein films, and to enable quantitative detection of avidin/biotin binding interaction. To carry out the affinity reaction, avidin immobilized on an ITO electrode was reacted with mouse IgG labeled with both biotin and ruthenium Tris-(2,2′-bipyridine) (Ru-bipy). The binding reaction between avidin and biotin was detected by the catalytic voltammetry of Ru-bipy in an oxalate-containing electrolyte. On sputtered ITO thin film electrode, although a single layer of Ru-bipy labeled avidin exhibited substantial anodic current, attaching the label to the outer IgG layer of the avidin/biotin-IgG binding pair resulted in almost complete loss of the signal. However, electrochemical current was recovered on ITO film electrodes prepared from nanometer-sized particles. The surface of the nanoparticle structured electrode was found by scanning electron microscopy to be very porous, and had twice as much surface binding capacity for avidin as the sputtered electrode. The results were rationalized by the assumption of different packing density of avidin inner layer on the two surfaces, and consequently different electron transfer distance between the electrode and Ru-bipy on the IgG outer layer. A linear relationship between electrochemical current and IgG concentration was obtained in the range of 40-4000 nmol L⁻¹ on the nanoparticle-based electrode. The approach can be employed in the electrochemical detection of immunoassays using non-enzymatic redox labels.     

Electrochemical Properties of Lanthanum Hexacyanoferrate Particles Immobilized onto Electrode Surface by Au‐Codeposition Method

Lanthanum hexacyanoferrate (LaHCF) was immobilized onto a substrate surface as an electroactive material by Au‐codeposition method. The LaHCF particles were attached to the electrode surface as the result of occlusion within the gold film deposited. This deposition method was first introduced for the preparation of hexacyanoferrate‐based modified electrodes. It was demonstrated that this deposition method provides a higher stability of the electroactive film in comparison with available methods for the mechanical attachment of electroactive films. On the other hand, electrochemical properties of the LaHCF film modified electrode were studied for the first time. The results showed that LaHCF film has excellent electrochemical activity as well as other analogues of Prussian blue. The modified electrode was successfully used as an electrocatalyst for the oxidation of ascorbic acid.     

铂基Pb-Sb表面合金电催化剂的制备与结构表征

通过电化学方法,在玻碳载体表面制备以Pt、Pb、Sb为主要成分的铂基Pb Sb表面合金电催化剂.运用电化学循环伏安、石英晶体微天平（EQCM）和扫描隧道显微镜（STM）技术对催化剂电极进行表征.结果表明：酸性溶液中在所制备的表面合金电极上,析氢起始电位负移至－0.45 V,表面合金的起始氧化电位为0.15 V,其稳定性明显高于电催化还原中常用的铅、锑等金属电极.通过EQCM研究表面合金电极的形成过程,结合STM观察和XPS深度剖析,确定电催化剂表面是由粒度均匀的纳米颗粒构成的表面合金层.     

Analytical performance characteristics of thin and thick film amperometric microcells

The analytical performance of amperometric microcells with different electrode geometries is compared for enzyme activity measurements. The microcells were fabricated with thin film photolithography or thick film screen-printing in four different designs. The cells made with the thin film process used flexible substrate with microelectrode array or a circular, disk-shaped working electrode. The screen-printed working electrodes had semicircle or disk shape on ceramic chips. Putrescine oxidase (PUO) activity measurement was used as a model. The determination of PUO activity is important in the clinical diagnosis of premature rupture of the amniotic membrane. An electropolymerized m-phenylenediamine size-exclusion layer was used to eliminate common interferences. The size exclusion layer revealed also to be advantageous in protecting the electrodes from fouling by putrescine (enzyme substrate). The electrode fouling of bare electrodes was insignificant for screen-printed electrodes, but very severe for electroplated platinum working electrodes. The microelectrode array electrodes demonstrated smaller RSD and higher normalized sensitivities for hydrogen peroxide and PUO activity. All the other electrodes were demonstrating comparable analytical performances.     

纳米碳管作为氧扩散电极催化层第二相碳载体的电极特性

A novel gas diffusion electrode using binary carbon supports (carbon nanotubes and active carbon) as the catalyst layer was prepared. The electrochemical properties for oxygen reduction reaction (ORR) in alkaline electrolyte were investigated by polarization curves and electrochemical impedance spectroscopy. The results show that the binary-support electrode exhibits higher electrocatalytic activity than the single-support electrode, and the best performance is obtained when the mass ratio of carbon nanotubes and activated carbon is 50 ∶50. The results from their electrode kinetic parameters indicate that the introduction of carbon nanotubes as a secondary support provides high accessible surface area, good electronic conductivity and fast ORR kinetics. The electrocatalytic activity of binary-support electrodes is obviously improved by the deposition of Pt nanoparticles on carbon nanotubes, even at very low Pt loading (45.7 μg/cm2). In addition, the EIS analysis results show that the process of ORR may be controlled by diffusion of oxygen in the thin film for binary-support electrodes with or without Pt catalyst.