苯乙烯－乙烯共聚物的合成及其结构性能的研究

用负载型钛系催化剂ＭｇＣｌ２／ＴｉＣｌ４，ＮｄＣｌ３／ＡｌＥｔ３（ＳＮ－１催化剂）制备出组份比例变化的苯乙烯－乙烯共聚产物，共聚产物通过溶剂萃取分离，＾１３Ｃ－ＮＭＲ，ＩＲ，动态粘弹谱进行表征，并初步进行了与聚苯乙烯共混作用的研究。结果表明，ＳＮ－１催化剂能有效地催化苯乙烯与乙烯共聚合，共聚产物为含有均聚聚苯乙烯的共聚复合物，其中约２５ｍｏｌ％的苯乙烯参加了共聚。共聚产物与ａＰＳ共混可明显提高ａＰ     

等规聚苯乙烯的合成及其结晶性能

用负载型钛系催化剂ＭｇＣｌ_２／ＴｉＣＬ_４，ＮｄＣｌ_３／ＡｌＥｔ_３（ＳＮ－１催化剂）在甲苯溶剂中进行苯乙烯的定向聚合，单体转化率。催化效率和产物的等规度随单体浓度增大先是提高，达到最大值后，逐渐下降，等规度最高可达９８％．产物的分子量则随单体浓度增大而增大．ＤＳＣ测定表明，产物中的无规物（ａＰＳ）有利于等规聚苯乙烯（ｉＰＳ）结晶，但对结晶的熔点有降低作用．向产物加入更多的ａＰＳ则由于稀释效应而使ｉＰＳ的结晶度线性下降．在聚乙烯（ＰＥ）／ｉＰＳ共混物中，ＰＥ含量对ｉＰＳ的结晶度无显著影响；但在聚碳酸酯（ＰＣ）／ｉＰＳ共混物中，ＰＣ含量对ｉＰＳ的结晶度影响较复杂．     

复合催化剂AlCl_3／SbCl_3的α－蒎烯／苯乙烯阳离子聚合反应研究

用微臭氧化－薄层层析法分析测定了复合催化剂ＡｌＣｌ_３／ＳｂＣｌ_３，在不同Ｓｂ／Ａｌ比、投料比、溶剂和温度等条件下的α－菠烯（Ｍ_１）／苯乙烯（Ｍ_２）共聚产物的构成，表明该复合催化剂可获得～１００％共聚体，其中α－蒎烯链节含量Ｆ１可在３０％～５６％之间调控。在仅生成共聚体的条件下由Ｍａｙｏ－Ｌｅｗｉｓ积分式首次测定了竞聚率。ＡｌＣｌ_３／ＳｂＣｌ_３和单独ＡｌＣｌ_３相比，ｒ１增大，ｒ２减小，ｒ２／ｒ１值降低了５～６倍，使不易共聚的Ｍ_１／Ｍ_２变为易于共聚，可制备Ｍ_１组分含量高的共聚体。确认该复合催化剂对Ｍ_１／Ｍ_２的优良共聚合性能在于阳离子聚合活性种的非质子和抗衡阴离子（团）的特殊结构和性质．     

AlCl_3／SbCl_3复合体系引发α－蒎烯／苯乙烯阳离子共聚合

比较了ＡｌＣｌ_３和ＡｌＣｌ_３／ＳｂＣｌ_３复合体系的α－蒎烯／苯乙烯阳离子共聚反应及产物的摩尔质量分布。结果表明，由于用ＡｌＣｌ_３体系两种单体活性差大而难以共聚，用ＡｌＣｌ_３／ＳｂＣｌ_３复合体系，苯乙烯聚合速率相对减小，而α－蒎烯聚合速率增大，加之苯乙烯的共催化剂作用，加速α－蒎烯聚合，可使α－蒎烯与苯乙烯进行有效共聚。考察了［Ｓｂ］／［Ａｌ］比、催化剂浓度、单体投料比等对共聚体系α－蒎烯、苯乙烯转化速率及产物Ｍ_ｎ的影响。     

复合催化剂AlCl3／SbCl3的α—蒎烯／苯乙烯阳离子聚合反…

用微臭氧化－薄层层析法分析测定了复合催化剂ＡｌＣｌ３／ＳｂＣｌ３在不同Ｓｂ比、投料比、溶剂和温度等条件下的α－蒎烯（Ｍ１）／苯乙烯（Ｍ２）共聚产物的构成。表明该复合催化剂可获得￣１００％共聚体，其中α－蒎烯链节含量Ｆ１可在３０％￣５６％之间调控。在仅生成共聚体的条件下由Ｍａｙｏ－Ｌｅｗｉｓ积分式首次测定了竞聚率。ＡｌＣｌ３／ＳｂＣｌ３和单独ＡｌＣｌ３相比，ｒ１增大，ｒ２减小，ｒ２／ｒ１值降低了５￣     

TiCl_4／SiO_2－MgCl_2载体催化剂下的乙烯／己烯－1共聚反应

ＴｉＣｌ_４／ＳｉＯ_２－ＭｇＣｌ_２载体催化剂下的乙烯／己烯－１共聚反应陈辉，张学全，黄葆同王展望，杨永然（中国科学院长春应用化学研究所长春１３００２２）（辽阳化纤公司化工三厂辽阳）关键词乙烯，己烯，共聚，Ｚｉｅｇｌｅｒ－Ｎａｔｔａ催化剂乙烯／α－烯?..     

AlCl3／SbCl3复合体系引发α—蒎烯／苯乙烯阳离子共聚合

比较了ＡｌＣｌ３和ＡｌＣｌ３／ＳｂＣｌ３复合体系的α蒎烯／苯乙烯阳离子共聚反应及产物的摩尔质量分布。结果表明，由于用ＡｌＣｌ３体系两种单体活性差大而难以共聚，用ＡｌＣｌ３／ＳｂＣｌ３复合体系，苯乙烯聚合速率相对减小，而α蒎烯聚合速率增大，加之苯乙烯的共催化剂作用，加速α－蒎烯聚合，可使α－蒎烯与苯乙烯进行有效共聚，考察（Ｓｂ）／（Ａｌ）比，催化剂浓度，单体投料比等对共聚体系α蒎烯，苯乙烯转化速率及     

（四甲基二硅撑）双（3－三甲硅基环戊二烯基）－四羰基二铁的反应性

标题化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２／（μ－ＣＯ）_２（Ａ）分子中的Ｆｅ－Ｆｅ键被钠汞齐还原断裂，生成相应的双铁负离子，分别与ＭｅＣＯＣｌ、ＰｈＣＯＣｌ、ＰｈＣＨ_２Ｃｌ、ＣｌＣＨ_２ＣＯＯＣ_２Ｈ_５和Ｐｈ_３ＳｎＣｌ进行亲核取代反应，生成在铁原子上引入相应取代基的产物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２Ｒ］_２（Ｒ：ＭｅＣＯ（１），ＰｈＣＯ（２），ＰｈＣＨ_２（３），ＣＨ_２ＣＯＯＣ_２Ｈ_５（４），Ｐｈ_３Ｓｎ（５），Ｉ（６））。Ａ在氯仿中与碘反应，得到Ｆｅ－Ｆｅ断裂的双铁碘化物，但在苯中与过量碘反应，则得到Ｆｅ－Ｉ－Ｆｅ桥联的离子型化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２Ｉ·Ｉ（７）。化合物６的晶体和分子结构经Ｘ射线衍射测定，６属单斜晶系，Ｐ２１／ｃ空间群，ａ＝１．７２１７（４）ｎｍ，ｂ＝０．７７５３（２）ｎｍ，Ｃ＝１．３６２９（７）ｎｍ，β＝１０３．８０（３）°，Ｖ＝１．７６７（２）ｎｍ３，Ｚ＝４，Ｄｃ＝１．６２９９·ｃｍ－１，最终偏差因子Ｒ＝０．０５４。     

新型高活性催化剂乙烯气相聚合的研究（I）：气相均聚和共聚…

研究了新型高活性乙烯气相聚合催化剂ＴｉＣｌ４／ＭｇＣｌ２／ＺｎＣｌ２／ＳｉＣｌ４／醇／Ａｌ（ｉ－Ｂｕ）３体系中钛和醇组分含量对聚合反应和产物颗粒形态的影响。测定了乙烯气相聚合反应动力学曲线，确定了聚合动力学方程。用ＳＥＭ，ＤＳＣ，ＷＡＸＤ，＾１＾３ＣＮＭＲ对催化剂及聚合物的形态，结构和性能进行了分析和表征。     

新型五甲基茂基三苄氧基钛／甲基铝氧烷催化剂合成苯乙烯—乙烯共聚？…

以五甲基茂基三苄氧基钛〔Ｃp＊Ｔi（ＯＢz）３〕和甲基铝氧烷（ＭＡＯ）组成的催化体 用本体法合成出苯乙烯－乙烯共聚物Ｐoly（Ｓ－ｃｏ－Ｅ）。考察了共聚温度,共聚时间 ,Ａ１／Ｔi摩尔比,主催化剂浓度〔Ｔi〕等条件对共聚反应的影响。共聚产物经沸丁酮,沸四氢呋喃（ＴＨＦ）连续抽提分离,发现共聚物主要存在于ＴＨＦ可溶级分中。可溶级分经ＤＳＣ,＾１３Ｃ－ＮＭＲ,ＷＡＸＤ,ＤＭＡ等手段分析,证明苯乙烯－乙烯共聚物为     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.