Oxidation of small unsaturated methyl and ethyl esters

The ignition delay times were measured behind reflected shock waves for temperatures from 1280 to 1930 K, pressures from of 7–9.65 atm, fuel concentrations of 0.4, 0.5, and 1%, and equivalence ratios equal to 0.25, 1.0, and 2.0 in the cases of four unsaturated esters: methyl crotonate, methyl acrylate, ethyl crotonate, and ethyl acrylate. Ignition delay times were measured using chemiluminescence emission from OH at 306 nm and piezoelectric pressure measurements made at the shock tube sidewall. No important difference of reactivity was observed between methyl and ethyl unsaturated esters, methyl and ethyl crotonate having the same reactivity as methyl butanoate. The reactivity of acrylates is greater than that of crotonates especially at the lowest investigated temperatures. Detailed mechanisms for the combustion of the four studied unsaturated esters have been automatically generated using the version of EXGAS software recently improved to take into account this class of oxygenated reactants. These mechanisms have been validated through satisfactory comparison of simulated and experimental results. The main reaction pathways have been derived from flow rate and sensitivity analyses. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 204–218, 2011     

Enthalpies of formation, bond dissociation energies and reaction paths for the decomposition of model biofuels: ethyl propanoate and methyl butanoate

The complete basis set method CBS-QB3 has been used to study the thermochemistry and kinetics of the esters ethyl propanoate (EP) and methyl butanoate (MB) to evaluate initiation reactions and intermediate products from unimolecular decomposition reactions. Using isodesmic and isogeitonic equations and atomization energies, we have estimated chemically accurate enthalpies of formation and bond dissociation energies for the esters and species derived from them. In addition it is shown that controversial literature values may be resolved by adopting, for the acetate radical, CH3C(O)O(.-), DeltaH(o)(f)298.15K) = -197.8 kJ mol(-1) and for the trans-hydrocarboxyl radical, C(.-)(O)OH, -181.6 +/- 2.9 kJ mol(-1). For EP, the lowest energy decomposition path encounters an energy barrier of approximately 210 kJ mol(-1) (approximately 50 kcal mol(-1)), which proceeds through a six-membered ring transition state (retro-ene reaction) via transfer of the primary methyl H atom from the ethyl group to the carbonyl oxygen, while cleaving the carbon-ether oxygen to form ethene and propanoic acid. On the other hand, the lowest energy path for MB has a barrier of approximately 285 kJ mol(-1), producing ethene. Other routes leading to the formation of aldehydes, alcohols, ketene, and propene are also discussed. Most of these intramolecular hydrogen transfers have energy barriers lower than that needed for homolytic bond fission (the lowest of which is 353 kJ mol(-1) for the C(alpha)-C(beta) bond in MB). Propene formation is a much higher energy demanding process, 402 kJ mol(-1), and it should be competitive with some C-C, C-O, and C-H bond cleavage processes.     

Fuel-specific influences on the composition of reaction intermediates in premixed flames of three C5H10O2 ester isomers

Measurements of the composition of reaction intermediates in low-pressure premixed flat flames of three simple esters, the methyl butanoate (MB), methyl isobutanoate (MIB), and ethyl propanoate (EP) isomers of C(5)H(10)O(2), enable further refinement and validation of a detailed chemical reaction mechanism originally developed in modeling studies of similar flames of methyl formate, methyl acetate, ethyl formate, and ethyl acetate. Photoionization mass spectrometry (PIMS), using monochromated synchrotron radiation, reveals significant differences in the compositions of key reaction intermediates between flames of the MB, MIB, and EP isomers studied under identical flame conditions. Detailed kinetic modeling describes how these differences are related to molecular structures of each of these isomers, leading to unique fuel destruction pathways. Despite the simple structures of these small esters, they contain structural functional groups expected to account for fuel-specific effects observed in the combustion of practical biodiesel fuels. The good agreement between experimental measurements and detailed reaction mechanisms applicable to these simple esters demonstrates that major features of each flame can be predicted with reasonable accuracy by building a hierarchical reaction mechanism based on three factors: (1) unimolecular decomposition of the fuel, especially by complex bond fission; (2) H-atom abstraction reactions followed by β-scission of the resulting radicals, leading to nearly all of the intermediate species observed in each flame; (3) the rates of H-atom abstraction reactions for each alkoxy or alkyl group (i.e., methoxy, ethoxy, methyl, ethyl, propyl) are effectively the same as in other ester fuels with the same structural groups.     

Oxidation of methyl and ethyl butanoates

This paper describes an experimental and modeling study of the oxidation of methyl and ethyl butanoates in a shock tube. The ignition delays of these two esters mixed with oxygen and argon for equivalence ratios from 0.25 to 2 and ester concentrations of 0.5% and 1% were measured behind a reflected shock wave for temperatures from 1250 to 2000 K and pressures around 8 atm. To extend the range of studied temperatures in the case of methyl butanoate, two sets of measurements were also made in a jet‐stirred reactor at 800 and 850 K, at atmospheric pressure, at residence times varying between 1.5 and 9 s and for equivalence ratios of 0.5 and 1. Detailed mechanisms for the combustion of methyl and ethyl butanoates have been automatically generated using a version of EXGAS software improved to take into account these oxygenated reactants. These mechanisms have been validated through comparison of simulated and experimental results in both types of reactor. The main reaction pathways have been derived from reaction flux and sensitivity analyses performed at different temperatures. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 226–252, 2010     

Synthesis of polynucleotide analogs by grafting optically active adenine,cytosine, and hypoxanthine derivatives onto polytrimethylenimine

A new family of polynucleotide analogs were prepared by grafting nucleic acid base derivatives onto polytrimethylenimine. Several new optically pure α-nucleic acid base substituted propanoic acids were prepared as pendant groups. The (R)-ethyl adeninylpropanoate was obtained from adenine and (S)-ethyl lactate by utilizing a diethyl azodicarboxylate-triphenyl phosphine method. Subsequent hydrolysis of the ester in aqueous acid gave the (R)-adeninylpropanoic acid without racemization. The reaction of cytosine sodium salt with (S)-ethyl 2-[(methylsulfonyl)oxy] propanoate produced the 20% racemized (R)-ethyl 2-(cytosin-1-yl)propanoate. The optically pure ester was obtained by recrystallization from ethyl alcohol, which was hydrolyzed in aqueous acid to give the (R)-acid with 66% enantiomeric excess. The (R)-2-(hypoxanthin-9-yl)propanoic acid was prepared by reaction of (R)-2-(adenin-9-yl)propanoic acid with sodium nitrite. The pendant groups were allowed to react with N-hydroxy compounds in the presence of dicyclohexylcarbodiimide to give the active esters. These active esters underwent reaction with N,N-dipropylamine to provide monomer model compounds. The pendant groups were grafted onto polytrimethylenimine by using the active ester method. The racemization reactions were observed in the grafting reactions. The resulting polymers showed a range of percent grafting from 60 to 80%.     

甲磺酸达比加群酯杂质的合成

根据甲磺酸达比加群酯工艺,合成了甲磺酸达比加群酯的7个杂质：3-【【【2-｛［(4-氰基苯基)氨基］甲基｝-1-甲基-1H-苯并咪唑-5-基】羰基】(吡啶-2-基)氨基】丙酸（A）, 3-【【【2-【｛［4-(乙氧基)叔胺基］苯基｝氨基】甲基】-1-甲基-1H-苯并咪唑-5-基】羰基】(吡啶-2-基)氨基】丙酸乙酯盐酸盐(B), 3-【【【2-【｛［(4-甲脒基)苯基］氨基｝甲基】-1-甲基-1H-苯并咪唑-5-基】羰基】(吡啶-2-基)氨基】丙酸乙酯盐酸盐(C), 3-【【【2-【【【4-｛［(己氧基)羰基］氨基亚甲胺基｝苯基】氨基】甲基】-1-甲基-1H-苯并咪唑-5-基】羰基】(吡啶-2-基)氨基】丙酸甲酯盐酸盐(D), 3-【【【2-【【【4-【｛［(己氧基)羰基］氨基｝羰基】苯基】氨基】甲基】-1-甲基-1H-苯并咪唑-5-基】羰基】(吡啶-2-基)氨基】丙酸乙酯(E), 3-【【【2-【【【4-【｛［(己氧基)羰基］氨基｝亚氨甲基】苯基】氨基】甲基】-1-甲基-1H-苯并咪唑-5-基】羰基】(吡啶-2-基)氨基】丙酸(F), (Z)-3-【【【2-【【【4-【｛［(N,N′-二己氧基)羰基］脒基｝亚氨甲基】苯基】氨基】甲基】-1-甲基-1H-苯并咪唑-5-基】羰基】(吡啶-2-基)氨基】丙酸乙酯(G),其结构经¹H NMR和ESI-MS确证。     

Synthesis of trifluoromethyl derivatives of alkyl 2-nitromethylphosphonopropionates and -phosphonobutyrates

By adding diethyl hydrogen phosphite to 5-trifluoromethyl-2-furaldehyde (5-trifluoromethylfur-2-yl)(diethoxyphosphoryl)methanol was synthesized. It was oxidized with DMSO-acetic anhydride mixture to diethyl 5-trifluoromethyl-2-furoyl phosphonate. The reaction of the latter with ethoxymethylenetriphenylphosphorane gives ethyl (2E)-3-(diethoxyphosphoryl)-3-(5-trifluoromethylfur-2-yl)propenoate. Analogous reaction of (diethoxyphosphoryl)(5-trifluoromethylfur-2-yl)acetic aldehyde yields ethyl (4E)-4-(diethoxyphosphoryl)-4-(5-trifluoromethylfur-2-yl)-but-3-enoate. The addition of nitromethane to these esters of unsaturated acids in the presence of potassium fluoride gives a mixture of diastereomers of phosphorylated esters of 2-nitromethyl-3-(5-trifluoromethylfur-2-yl)propanoic and 3-nitromethyl-4-(5-trifluoromethylfur-2-yl)butanoic acids respectively. By the reduction of ethyl nitropropanoate with zinc and formic acid in dioxane ethyl 2-aminomethyl-3-(diethoxyphosphoryl)-3-(5-trifluoromethylfur-2-yl)propanoate was prepared in a low yield. It may be considered as the derivative of β-alanine containing additional pharmacophore fragments.     

Isobaric vapor-liquid equilibria for methyl esters + butan-2-ol at different pressures

Vapor-liquid measurements for the mixtures of three methyl esters (ethanoate, propanoate, butanoate) and butan-2-ol were obtained at 74.66, 101.32 and 127.99 kPa in a small capacity still. All systems were found to be thermodynamically consistent and the maximum likelihood principle was chosen as the regression technique to determine the parameters of different available equations. Only the mixture methyl butanoate + butan-2-ol presented a minimum azeotrope which shifted toward concentrations richer in alcohol as working pressure increased. Experimental results were compared with prediction by UNIFAC and ASOG methods.     

Kinetics and mechanism of thermal gas-phase elimination of β-substituted carboxylic acids

3-Phenoxypropanoic acid (1), 3-(phenylthio)propanoic acid (2), and 4-phenylbutanoic acid (3) were pyrolysed between 520 and 682 K. Analysis of the pyrolysates showed the elimination products to be acrylic acid and the corresponding arene. Pyrolysis of ethyl 3-phenoxypropanoate (4) and its methyl analogue (5), ethyl 3-(phenylthio)propanoate (6) and its methyl counterpart (7), and 3-phenoxypropane nitrile (8) were also investigated between 617 and 737 K. The thermal gas-phase elimination kinetics and product analysis are compatible with a thermal retro-Michael reaction pathway involving a four-membered cyclic transition state.     

Radical reactions involving esters of fumaric acid—III. Chain transfer processes

Model compounds have been used in studies at 60° in connection with transfer to polymer during the copolymerization of vinyl acetate with esters of fumaric acid. Succinate esters were used to simulate the fumarate ester units and ethyl acetate the vinyl acetate units in the copolymers. The succinate esters are much more reactive than ethyl acetate in transfer reactions with polyvinyl acetate radicals. Methyl isobutyrate and methyl propionate were also examined to assess the difference in reactivity in transfer of tertiary and secondary hydrogen atoms. It is concluded that branching is a very important reaction in the preparation of high conversion copolymers of fumarate esters with vinyl acetate.     

Heck-mediated synthesis and photochemically induced cyclization of [2-(2-styrylphenyl)ethyl]carbamic acid ethyl esters and 2-styryl-benzoic acid methyl esters: total synthesis of naphtho[2,1f]isoquinolines (2-azachrysenes)

We describe two new closely related total syntheses of naphtho[2,1-f]isoquinolines. The first synthesis consists of a Heck coupling reaction between trifluoromethanesulfonic acid 2-(2-ethoxycarbonylaminoethyl)phenyl esters and styrenes to give [2-(2-styrylphenyl)ethyl]carbamic acid ethyl esters. These compounds cyclize to give (2-phenanthren-1-yl-ethyl)carbamic acid ethyl esters, from which 2-azachrysenes can be obtained in a three-step sequence. The second synthesis includes a new total synthesis of 2-styrylbenzoic acid methyl esters by Heck coupling of methyl o-iodobenzoates to styrenes, followed by the transformation of the resulting benzoic acid derivatives into phenanthrene-1-carboxylic acid methyl esters and then into the target compounds by a six-step sequence including a Bischler-Napieralski cyclization.     

A modular and concise total synthesis of (+/-)-daurichromenic acid and analogues

A modular and concise total synthesis of (+/-)-daurichromenic acid has been accomplished in four steps from ethyl acetoacetate, ethyl crotonate, and trans,trans-farnesal. A series of analogues of this natural product, which has potent anti-HIV activity, were also prepared from ethyl or methyl acetoacetate and a series of readily available alpha,beta-unsaturated esters and aldehydes.     

Stereospecific substitution of enantiomerically pure 1-(2-pyridinyl)ethyl methanesulfonate with beta-dicarbony compounds

The alkylation of the sodium salt of the malonic acid diester with (R)-1-(2-pyridinyl)ethyl methanesulfonate (2) gave the dimethyl (R)-[1-(2-pyridinyl)ethyl]malonate (3a), stereospecifically. The alkylation reaction of methyl acetoacetate gave the methyl (2'S,2R/2S)-3-oxo-2-[1-(2-pyridinyl)ethyl]butanoate (3d) along with the methyl (S)-3-[1-(2-pyridinyl)ethoxy]-2-butenoate (4d). The acid hydrolysis and decarboxylation of 3d under acidic conditions gave (R)-4-(2-pyridinyl)pentan-2-one (6), and the alkylation of methyl (R)-[1-(2-pyridinyl)ethyl]acetoacetate with benzyl bromide gave a mixture of C-benzylated and O-benzylated products 7 and 8.     

Biosynthesis of tetrapetalones

The biosynthesis of tetrapetalones (tetrapetalones A, B, C, and D) in Streptomyces sp. USF-4727 was studied by feeding experiments with [1-13C] sodium propanoate, [1-13C] sodium butanoate, [carbonyl-13C] 3-amino-5-hydroxybenzoic acid (AHBA) hydrochloride, and [1-13C] glucose, followed by analysis of the 13C-NMR spectra. These feeding experiments revealed that the four tetrapetalones were polyketide compounds constructed from propanoate, butanoate, AHBA, and glucose. The tetrapetalone biosynthetic pathway was also suggested in this study. In this pathway, tetrapetalone A (1) is synthesized by polyketide synthase (PKS) using AHBA as a starter unit, then the side chain of 1 is subjected to acetoxylation to produce tetrapetalone B (2). Additionally, 1 is oxidized and transformed into tetrapetalone C (3). In a similar way, 2 is converted to tetrapetalone D (4). Therefore, the biosynthetic relationship of the four tetrapetalones was indicated.     

Determination of the absolute configuration of chiral alpha-aryloxypropanoic acids using vibrational circular dichroism studies: 2-(2-chlorophenoxy) propanoic acid and 2-(3-chlorophenoxy) propanoic acid

The enantiomers of 2-(2-chlorophenoxy) propanoic acid and 2-(3-chlorophenoxy) propanoic acid were resolved on a chiral HPLC column and investigated using mid-infrared vibrational circular dichroism (VCD). Experimental infrared vibrational absorption and VCD spectra were measured in CDCl3 solution in the 2000-900 cm-1 region and compared with the ab initio predictions of absorption and VCD spectra. The predicted spectra were obtained with density functional theory using B3LYP/6-31G* basis set for the stable and dominant conformers. But the predicted spectra did not provide unambiguous structural information due to intermolecular hydrogen bonding in solution. To eliminate the hydrogen bonding effects, the acids were converted to the corresponding methyl esters and the experimental absorbance and VCD spectra of methyl esters were measured. B3LYP predicted spectra were also obtained for the stable and dominant conformers of the esters. From a comparison of the experimental VCD spectra of methyl esters with corresponding ab initio predictions, the absolute configurations of esters, and therefore of their parent acids, are unambiguously determined to be (+)-(R).     

达比加群酯中间体3-【【【2-{[(4-氰基苯基)氨基]甲基}-1-甲基-1H-苯并咪唑-5-基】羰基】(吡啶-2-基)氨基】丙酸乙酯的合成

以对氨基苯腈为起始原料,经胺化反应制得N-(4-氰基苯基)甘氨酸(4);4与N-[3-氨基-4-(甲基氨基)苯甲酰基]-N-2-吡啶-β-丙氨酸乙酯(5)经酰胺化后经闭环反应,合成了达比加群酯的关键中间体——3-【【【2-{[(4-氰基苯基)氨基]甲基}-1-甲基-1H-苯并咪唑-5-基】羰基】(吡啶-2-基)氨基】丙酸乙酯,总收率79.6%,其结构经~1H NMR和ESI-MS确证。     

Clouding behavior of nonionic–cationic and nonionic–anionic mixed surfactant systems in presence of carboxylic acids and their sodium salts

The study is focused on evaluation of clouding phenomena of the aqueous single nonionic surfactant system Triton X-100 (TX-100) and its mixed systems with anionic aerosol-OT (AOT) and cationic dodecylpyridinium chloride (DPC) in presence of hydrophobic ions furnished by sodium salts of carboxylic acids, viz., sodium ethanoate, sodium propanoate, sodium butanoate, and sodium hexanoate and the respective carboxylic acids [ethanoic acid, propanoic acid, butanoic acid, and hexanoic acid]. The influence of salts on the cloud point (CP) has been explained on the basis of salt effect as well as the solubilization of higher alkyl chain hydrophobic ions furnished by these salts. Moreover, the co- and counterion effect has been taken into account to explain the variation of the CP in the mixed systems. However, the effect of acids on CP has been explained in the light of their aqueous solubility and their partitioning ability between octanol and water as reflected by their K _OW values.     

The synthesis and liquid crystal properties of some 4-n-nonylphenyl esters of 3-(4'-n-alkoxybiphenylyl)- and 3-(4'-n-alkoxybiphenylyl)-3-methyl-propanoic acids and their laterally fluorinated analogues

A number of 4-n-nonylphenyl esters and mono- and di-fluorinated 4-n-nonylphenyl esters derived from 3-(4'-n-alkoxybiphenylyl)propanoic acids (II) have been synthesized and their thermotropic liquid crystal properties assessed with a view to obtaining tilted smectic phases for possible use in ferroelectric display devices. Many of these compounds exhibit wide temperature range S_C and S_I/F phases, but none gave the ideal phase sequence S_C-S_A-N-I mainly because the structure of these compounds was not conducive to the formation of the nematic phase. To try to alleviate this problem a series of 4-n-nonylphenyl esters based on 3-(4'-n-alkoxybiphenylyl)-3-methylpropanoic acid was prepared, where a lateral methyl group was incorporated in the β-position of the -CH₂CH₂CO₂- linkage. Incorporation of the lateral methyl group encouraged the formation of a nematic phase at the expense of both the smectic A phase and tilted smectic phases.     

Efficient synthesis of branched poly(acrylic acid) derivatives via postpolymerization modification

The utility of pentafluorophenyl esters for the selective introduction of functional units and branch points in well-defined poly(acrylic acid) (PAA) derivatives is demonstrated using a combination of controlled radical polymerization and postpolymerization modification. Reversible addition-fragmentation chain transfer enables the synthesis of well-defined copolymers—poly(pentafluorophenyl acrylate-co-tert-butyl acrylate)—with the active ester repeat units serving as attachment points for reaction with primary amines, specifically tris(2-(t-butoxycarbonyl)ethyl)methyl amine (Behera's amine). Deprotection using trifluoroacetic acid removes both the backbone and side chain t-butyl esters to give a series of branched PAA derivatives containing novel tricarboxylic acid side chains that are well suited to complexation and multidentate interactions. Surprisingly, the active ester homopolymer is shown to have the highest reactivity with Behera's amine when compared to copolymers with lower incorporation of pentafluorophenyl esters, suggesting an intriguing interplay of neighboring group effects and steric interactions. The ability to tune the efficiency of postpolymerization modification gives a library of PAA derivatives.