SiO_2@PANI光子晶体的制备及电致变色性能研究

应用Stber法合成单分散SiO2微球,通过垂直沉积自组装光子晶体,由电化学法在所组装的SiO2微球表面生成聚苯胺(PANI),得到了核-壳结构SiO2@PANI光子晶体薄膜.测试了SiO2@PANI光子晶体薄膜的循环伏安曲线、多电位紫外吸收光谱、对比度、响应时间等电致变色性能,结果表明,该光子晶体薄膜在变色时颜色亮丽,其最大对比度可达77%,远高于单纯PANI薄膜的43%,同时响应时间变快.初步实验结果说明将光子晶体结构引入导电聚合物中,能够提高其电致变色性能.     

TiO2-PTPAT纳米核/壳结构复合膜的制备及电致变色性能

通过水热法在氟掺杂氧化锡(FTO)导电玻璃基底上制备了垂直生长的二氧化钛(TiO₂)纳米棒阵列, 以TiO₂纳米棒阵列为模板采用电化学聚合法, 原位制备了TiO₂-聚三[2-(4-噻吩)苯]胺(PTPAT)纳米核/壳结构的复合薄膜, 相比于纯PTPAT薄膜, TiO₂-PTPAT复合薄膜显示出更好的电致变色(EC)性能. PTPAT薄膜在600 nm波长下的对比度为28%, 在1100 nm波长下的对比度为60%, 其褪色时间为3.86 s, 着色时间为5.52 s; TiO₂- PTPAT复合薄膜在600 nm波长下的对比度为43%, 在1100 nm波长下的对比度为79%, 其褪色时间为3.35 s, 着色时间为4.43 s, 表明核/壳复合结构薄膜的光学对比度和响应时间性能更加优异. 将PTPAT薄膜和TiO₂-PTPAT复合薄膜作为电致变色层组装成固态EC器件, 基于复合薄膜的器件具有更好的循环稳定性和更高的耐受电压. 复合薄膜在保持PTPAT薄膜原有的EC性能的基础上, 由于有序生长的纳米阵列结构的引入增加了薄膜的比表面积, 为电致变色过程中离子的掺杂和脱掺杂提供了更多有序通道, 从而加快了离子扩散速度. TiO₂阵列的引入也改善了聚合物薄膜与透明导电电极之间的界面结合情况, 从而提升了器件的稳定性.     

快速提拉法制备PDMS/SiO2/PDMS-PDA光子弹性体薄膜

采用快速提拉法制备出SiO₂结构色薄膜，将其嵌入到聚二甲基硅氧烷(PDMS)中，然后将掺杂聚多巴胺(PDA)的PDMS(PDMS-PDA)涂覆在SiO₂结构色薄膜表面制备了PDMS/SiO₂/PDMS-PDA光子弹性体薄膜。采用扫描电子显微镜、纳米激光粒度仪、分光光度计、光纤光谱仪、拉力机和手机相机对SiO₂结构色薄膜的微观结构和光学性能以及PDMS/SiO₂/PDMS-PDA薄膜的力致变色性能和力学性能进行了表征。结果表明：SiO₂结构色薄膜为短程有序的非晶光子晶体薄膜，其结构色在漫射光下无角度依赖性，在直射光下有角度依赖性。通过表面涂覆黑色PDMS-PDA层，有效提高了光子弹性体薄膜在拉伸过程中结构色的饱和度，当应变为20%时，薄膜出现明显的结构色，并随着应变的增加反射峰位置不断蓝移。该薄膜具有较好的力学性能，其断裂伸长率达140%。     

气液界面法组装的Ni3(HITP)2电致变色薄膜及其性能

由于缺乏可控的成膜技术,三亚苯类金属有机框架(MOFs)材料的应用受到了限制。我们在气液界面组装了不同厚度的Ni₃(HITP)₂薄膜(HITP^3-=2,3,6,7,10,11-六亚氨基三亚苯),并将制备的薄膜转移到导电玻璃表面。利用X射线衍射(XRD)、场发射透射电子显微镜(FETEM)、场发射扫描电镜(FESEM)、X射线光电子能谱(XPS)和拉曼光谱对样品的晶体结构、微观形貌和元素组成进行表征,采用紫外可见分光光度计以及电化学工作站对Ni₃(HITP)₂薄膜的电化学和电致变色性能进行了研究和表征。结果表明,得益于Ni₃(HITP)₂电致变色薄膜的多孔结构和与电解液良好的接触,所得薄膜电极N-20具有较短的着色响应时间/褪色响应时间(0.6/0.7 s),且着色效率可达530 cm²·C^-1;而N-50具有较大的光调制范围(740 nm,70%)。     

流动控制沉积法制备PMMA叠层光子晶体薄膜及其光学性能研究

采用流动控制沉积法, 通过调控泵速和聚甲基丙烯酸甲酯(PMMA)胶体微球溶液的浓度, 制备出微球排列高度有序且薄膜紧密附着于基底的高质量光子晶体薄膜. 获得了制备高质量PMMA光子晶体薄膜的组装条件范围, 发现在该条件范围内, 当泵速或胶体微球溶液浓度一定时, PMMA光子晶体薄膜的厚度随胶体微球溶液浓度的增加或泵速的降低而增加. 研究了组装条件对PMMA光子晶体薄膜光学性能的影响, 发现光子禁带位置随光子晶体薄膜厚度增加或减少而红移或蓝移. 在此基础上, 控制组装条件得到了不同尺寸微球堆叠而成的叠层光子晶体薄膜, 并研究了其光学性能的变化规律. 结果显示, 叠层光子晶体薄膜的光子禁带峰为各层叠层光子晶体禁带峰的简单叠加, 且峰强度受光入射角方向影响.     

三联噻吩衍生物功能化SiO2反蛋白石光子晶体荧光薄膜的制备及应用

将单分散聚苯乙烯微球乳液与SiO₂溶胶均匀混合后, 于恒温恒湿条件下, 竖直沉积共组装制备得到蛋白石型光子晶体薄膜, 然后利用牺牲模板法制得SiO₂反蛋白石光子晶体薄膜. 该薄膜依次经过浓硫酸与过氧化氢混合液、 3-氨丙基三甲氧基硅烷的甲苯溶液、 三联噻吩的三氯甲烷溶液和硼氢化钠的甲醇溶液处理后, 得到三联噻吩衍生物功能化的SiO₂反蛋白石光子晶体. 结果表明, 制备得到的光子晶体薄膜在512 nm处有荧光发射, 经紫外辐射后荧光猝灭, 甲醛气氛下458 nm处又出现新的荧光发射峰. 在甲醛气氛下20 s即可观察到荧光发射, 空气氛围下可恢复, 10次循环仍可保持强的荧光发射, 可重复性良好. 以无反蛋白石光子晶体结构的三联噻吩衍生物的平滑膜与甲醛作用的体系作为参比, 以330和400 nm聚苯乙烯微球为模板制备的三联噻吩功能化反蛋白石光子晶体, 在甲醛气氛中发射的荧光分别增强47.5和78.6倍. 这是由于光子晶体光子禁带的红带边和蓝带边与荧光发射波长相重叠, 产生了慢光子效应, 极大地增强了发射的荧光强度.     

Ag/WO3纳米复合膜的制备及其电致变色性质和器件的研究

通过真空镀膜方法制备的纳米Ag薄膜均匀致密, 表面光滑. 然后通过电化学方法在Ag纳米薄膜上沉积一层三氧化钨(WO3), 制备纳米Ag/WO3复合膜. 并在此基础上构筑五层式玻璃/ITO/纳米Ag-WO3复合膜/固态电解质/聚(3-甲基噻吩)/ITO/玻璃电致变色器件. 实验结果表明, 与传统的WO3膜相比, 纳米Ag/WO3复合膜具有更好的电化学活性、更高的对比度、更短的响应时间, 以及更好的稳定性. 由该复合膜组装的电致变色器件工艺简单, 电致变色性能良好.     

聚苯胺衍生物电致变色薄膜的制备与物性研究

采用循环伏安电化学沉积方式分别制备了聚邻甲氧基苯胺(1)和聚邻甲氧基苯胺/邻硝基苯胺(2)电致变色薄膜, 并通过UV-Vis、分光光度仪、场发射扫描电子显微镜(SEM)对其进行性能表征. 结果显示: 变色膜1在不同电压下能实现湖绿色(U＝－0.5 V)和淡紫色(U＝0.9 V)变化, 响应时间约15 s, 最大透光率变化(DT_max)约10% (500 nm)|变色膜2在不同电压下能实现橄榄绿色(U＝－0.9 V)和深酞蓝色(U＝1.4 V)变化, 响应时间约2 s, 最大透光率变化(DT_max)约为20% (497 nm)|SEM测试得到薄膜2的厚度约550 nm, 且不同颜色状态下其表面形貌及导电性能有较大的差别. 由以上结果可以看出: 电致变色薄膜2比1具有更快的响应速度和较好的颜色对比度, 因此薄膜2是更好的电致变色材料.     

多色显示电致变色聚合物叠层复合薄膜的可控制备

在氧化铟锡透明导电玻璃(ITO)电极上电化学聚合依次得到聚4,4',4″-三[4-(2-联噻吩基)苯基]胺(PTBTPA)和聚3,4-乙烯二氧噻吩(PEDOT)薄膜, 从而可控制备出叠层复合薄膜. 由红外光谱(FTIR)和场发射扫描电镜(SEM)表征了复合薄膜. 紫外-可见吸收光谱和电化学测试结果表明, 相对于PTBTPA薄膜(中性态橙色到氧化态深灰色)与PEDOT薄膜(中性态深蓝色到氧化态浅蓝色)的颜色变化, 叠层复合薄膜在不同的电压下能够展现出从橙色→蓝色→墨绿色的颜色变化, 并保持了较好的电化学活性和光学对比度. 这主要源于中性态吸收光谱和颜色显示互补的电致变色材料的选择. 本文提供了一种简单有效的制备多色乃至全色显示的电致变色材料的方法, 该方法同样适用于其它聚合物电致变色材料体系.     

纳米纤维素/聚3,4-乙撑二氧噻吩复合薄膜的制备及电致变色性能

以棉浆粕为原料,采用硫酸溶胀结合超声波处理的方法制备了纳米纤维素(NC).在纳米纤维素的水分散液中加入3,4-乙撑二氧噻吩单体,以过硫酸铵为氧化剂,采用原位化学氧化法制得了纳米纤维素/聚3,4-乙撑二氧噻吩(NC/PEDOT)纳米复合物.对NC和NC/PEDOT复合物进行扫描电镜、透射电镜和红外光谱分析.将纳米复合物的水分散液滴涂在氧化铟锡(ITO)玻璃表面形成复合薄膜,考察不同纳米纤维素含量对NC/PEDOT复合薄膜电致变色性能的影响.结果表明,NC呈棒状,平均直径为20 nm,长度为100~300nm;NC/PEDOT复合物中PEDOT均匀包覆在NC表面形成核壳结构,平均直径为30 nm;复合薄膜中当NC含量为60%时,其电致变色性能最好,具有最高的对比度(24.4%),最短的响应时间(1 s),最高的着色效率(51.8 cm~2/C).     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.