Synthesis of poly(4-vinylpyridine) and block copoly (4-vinylpyridine-b-styrene) by atom transfer radical polymerization using 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazamacrocyclotetradecane as ligand

Poly(4-vinylpyridine) (P4VP) and block copolymer, poly(4-vinylpyridine-b-styrene) (P4VP-b-PSt) were prepared by atom transfer radical polymerization (ATRP) using 1-phenylethyl chloride as initiator, CuCl and 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazamacrocyclotetradecane (Me₆[14]aneN₄) as catalyst and ligand. The polymerization of 4VP was carried out in 2-propanol at 40 °C. GPC and NMR studies show that the plot of ln([4VP]₀/[4VP]) against the reaction time is linear, and the molecular weight of the resulting P4VP increased linearly with the conversion. Within 3 h, the conversion can reach almost 90%. P4VP-b-PSt amphiphilic block copolymer with low polydispersity index (M_w/M_n ≈ 1.2) is also obtained by ATRP of St in DMF at 110 °C using P4VP-Cl as macroinitiator, CuCl/ Me₆[14]aneN₄ as catalyst.     

Synthesis and characterisation of new shell cross-linked micelles with amine-functional coronas

Shell cross-linked (SCL) micelles with amine-functional coronas have been constructed in aqueous solution by exploiting the micellar self-assembly of new thermo-responsive ABC triblock copolymers. These copolymers were prepared via atom transfer radical polymerisation (ATRP) in convenient one-pot syntheses and comprised a thermo-responsive core-forming poly(propylene oxide) [PPO] block, a cross-linkable central poly(glycerol monomethacrylate) [GMA] block and an amine-functional outer block based on either poly(2-(dimethylamino)ethyl methacrylate) [DMA] or poly([2-(methacryloyloxy)ethyl]trimethyl ammonium chloride) [QDMA]. DMF GPC analysis indicated an M_n of 17,700 and an M_w/M_n of 1.46 for the PPO-PGMA-PDMA triblock copolymer. The DMA residues of the PPO-PGMA-PDMA triblock copolymer were reacted with methyl iodide to prepare copolymers with differing degrees of quaternisation. Each triblock copolymer dissolved molecularly in aqueous solution at 5 °C and formed micelles with amine-functional coronas above a critical micelle temperature (CMT) of around 12 °C, which corresponded closely to the cloud point of the PPO macro-initiator. Cross-linking of the GMA residues in the inner shell using divinyl sulfone produced SCL micelles that remained intact at 5 °C, i.e. below the cloud point of the core-forming PPO block. Aqueous electrophoresis studies confirmed that these SCL micelles had considerable cationic surface charge, as expected. The cationic SCL micelles were adsorbed onto a near-monodisperse anionic silica sol, which was used as a model colloidal substrate. Thermogravimetric analyses indicated SCL micelle mass loadings of 6.1-15.5 wt.%, depending on the initial micelle concentration. Aqueous electrophoresis studies confirmed that surface charge reversal occurred on adsorption of the SCL micelles and scanning electron microscopy studies revealed the presence of SCL micelles on the silica particles.     

Synthesis of tertiary-butyl acrylate polymers and preparation of diblock copolymers using atom transfer radical polymerization

The synthesis of tert-butyl acrylate by atom transfer radical polymerization (ATRP) is reported. This polymer was prepared using FeCl₂ · 4H₂O(PPh₃)₂ catalyst system in conjunction with methyl 2-bromopropionate as initiator, in bulk and in solution using acetone as a solvent. The addition of solvent was necessary in order to decrease the polymerization rate and to afford low polydispersity polymers. The number-average molecular weights of the resulting polymers increased in direct proportion to the monomer conversion, and the polydispersities (M_w/M_n) were as low as 1.2. In addition, the preparation of an AB diblock copolymer of poly (n-butyl methacrylate)-block-poly (tert-butyl acrylate) by ATRP is reported. The resulting polymers and copolymers were characterized by means of size exclusion chromatography and ¹H-NMR Spectroscopy.     

Ethylene/1‐pentene copolymers synthesized using the metaloxycarbene complex catalyst system [(CO)5W=C(Me)OZr(Cp)2Cl]/MAO

Ethylene/1‐pentene copolymers were prepared using a [(CO)₅W= C(Me)OZr(Cp)₂Cl] (1)/MAO catalyst system. 1‐Pentene incorporation in the copolymer was monitored using ¹³C‐NMR spectroscopic methods. The weight average molecular weights (M_w) of the copolymers were between 142,000 and 629,000 g/mol, with polydispersity indexes (PDIs) ranging from ≈ 2 to 90, as analyzed by size exclusion chromatography (SEC). Melting and crystallization temperatures, determined using differential scanning calorimetry (DSC) and crystallization analysis fractionation (CRYSTAF), decreased linearly as the amount of 1‐pentene in the copolymer increased. SEC‐FTIR revealed that the 1‐pentene is predominantly incorporated in the low molecular weight fraction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5121–5133, 2004     

Synthesis of arborescent styrene homopolymers and copolymers from epoxidized substrates

The synthesis of arborescent styrenic homopolymers and copolymers was achieved by anionic polymerization and grafting. Styrene and p‐(3‐butenyl)styrene were first copolymerized using sec‐butyllithium in toluene, to generate a linear copolymer with a weight‐average molecular weight M_w = 4000 and M_w/M_n = 1.05. The pendant double bonds of the copolymer were then epoxidized with m‐chloroperbenzoic acid. A comb‐branched (or arborescent generation G0) copolymer was obtained by coupling the epoxidized substrate with living styrene‐p‐(3‐butenyl)styrene copolymer chains with M_w ≈ 5000 in a toluene/tetrahydrofuran mixture. Further cycles of epoxidation and coupling reactions while maintaining M_w ≈ 5000 for the side chains yielded arborescent copolymers of generations G1–G3. A series of arborescent styrene homopolymers was also obtained by grafting M_w ≈ 5000 polystyrene side chains onto the linear and G0–G2 copolymer substrates. Size exclusion chromatography measurements showed that the graft polymers have low polydispersity indices (M_w/M_n = 1.02–1.15) and molecular weights increasing geometrically over successive generations. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis, spectral and thermal properties of homo- and copolymers of 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate with styrene and methyl methacrylate and determination of monomer reactivity ratios

The methacrylate monomer, 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate (IAOEMA), was synthesized by reacting 2-chloro-N-(5-methylisoxazol)acetamide dissolved in acetonitrile with sodium methacrylate in the presence of triethylbenzylammoniumchloride (TEBAC). The free-radical-initiated copolymerization of IAOEMA, with styrene (ST) and methyl methacrylate (MMA) was carried out in dimethylsulphoxide (DMSO) solution at 65 °C using 2,2^′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomer (IAOEMA) and copolymers were characterized by FTIR, ¹H- and ¹³C-NMR spectral studies. The copolymer composition was evaluated by nitrogen content in polymers led to the determination of reactivity ratios. The reactivity ratios of the monomers were determined by the application of Fineman-Ross and Kelen-Tüdös methods. The analysis of reactivity ratios revealed that ST and MMA are more reactive than IAOEMA, and copolymers formed are statisticalle in nature. The molecular weights (M_w and M_n) and polydispersity index of the polymers were determined using gel permeation chromagtography. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of IAOEMA in the copolymers. The apparent thermal decomposition activation energies (E_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance.     

Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).     

Towards more controlled poly(n-butyl methacrylate) by atom transfer radical polymerization

The homogeneous controlled/‘living’ free radical polymerization of n-butyl methacrylate in toluene or o-xylene at 90 °C, in bulk and in solution, using the novel combination of the catalyst bis-triphenylphosphine iron(II)chloride tetrahydrate (FeCl₂ · 4H₂O(PPh₃)₂) with ethyl 2-bromoisobutyrate ((CH₃)₂CBrCO₂Et)) and α,α-dichloroacetophenone (CHCl₂COPh) as initiators has been investigated. The rate of polymerization initiated by the two initiators exhibited first-order kinetic with respect to the monomer. A linear increase of the number-average molecular weight (M_n) versus monomer conversion was observed for these systems. Among the two initiation systems, ethyl 2-bromoisobutyrate gave the fastest polymerization rate. A system with Fe³⁺ added at the beginning of the polymerization was examined and the lowest polydispersity (M_w/M_n∼1.2) was found when 10% Fe³⁺, relative to Fe²⁺ was added.     

Neodymium alk(aryl)oxides-dialkylmagnesium systems for butadiene polymerization and copolymerization with styrene and glycidyl methacrylate

The application of well-defined neodymium alkoxides/aryloxides in combination with dialkylmagnesium reagents for 1,3-butadiene (BD) polymerization and copolymerization with styrene (St) and glycidyl methacrylate (GMA) has been investigated. The trinuclear complex Nd₃(Ot-Bu)₉(THF)₂ (1) provided a low-activity system for BD polymerization, even at high temperature, but with a high trans-1,4 stereospecificity (trans-1,4≈95%). Aryloxide complexes Nd(O-2,6-t-Bu₂-4-Me-Ph)₃(THF) (2) and Nd(O-2,6-t-Bu₂-4-Me-Ph)₃ (3) were found to give more active systems. The polymerization displayed a controlled character, i.e. a precise control of the molecular weight and a low polydispersity (M_w/M_n<1.30) for high catalyst concentration, keeping the same level of stereocontrol over the polymerization course. The statistical copolymerization of BD and styrene with those systems was successful. High-molecular weight copolymers (M_n up to 50?000 g mol⁻¹) with noticeable styrene content (3-15 mol%) were synthesized. Determination of the microstructure by ¹³C-NMR showed exclusively trans-1,4-BD-St sequences. The livingness of BD polymerization encouraged attempts of diblock copolymerization with GMA. In this case, low-molecular weight polymers with variable polydispersities were obtained (M_n<20?000 g mol⁻¹; M_w/M_n=1.4-5.0). The composition of the copolymers was analyzed by ¹H- and ¹³C-NMR and IR spectroscopies. SEC analyses confirmed the true nature of the diblock copolymer. The influence of the alkylating agent on those (co)-polymerizations was briefly studied. Finally, the mechanism of polymerization is also discussed.     

Synthesis of hyperbranched-linear star block copolymers by atom transfer radical polymerization of styrene using hyperbranched poly(siloxysilane) (HBPS) macroinitiator

Hyperbranched-linear star block copolymers, hyperbranched poly(siloxysilane)-block-polystyrene (HBPS-b-PSt), were prepared by atom transfer radical polymerization (ATRP) of styrene in xylene, using bromoester-terminated HBPS (HBPS-Br (P3), M_n = 7500, M_w/M_n = 1.76) as a macroinitiator. The number-average molecular weights of the obtained polymers (M_n) were in the range of 21,800-60,000 and molecular weight distributions were unimodal throughout the reaction (M_w/M_n = 1.28-1.40). These polymers showed 5 wt.% decomposition temperature (T_d5) over 300 °C. The DSC thermograms of the resulting polymers indicated two glass transition temperatures (T_g). The T_g of HBPS segment shifted to higher value while the T_g of PSt segment shifted to lower value compared with those of the homopolymers. Preliminary physical characterization related to the solution viscosity of the resulting block copolymers is also reported.     

Synthesis and electroluminescence properties of carbazole-containing 2,6-naphthalene-based conjugated polymers

Three types of carbazole containing 1,5-disubstituted poly(2,6-naphthalene) derivatives, i.e., 2,6-naphthalene homopolymer that has a carbazolyl side chain at 1,5-positions, random copolymers and alternating copolymers consisting of 1,5-dialkoxynaphthalene-2,6-diyl and N-phenylcarbazole-2,7-diyl were newly synthesized by Ni-mediated Yamamoto polycondensation and Pd-catalyzed Suzuki coupling reaction. The number-average molecular weights (M_n) of the polymers and their polydispersity indices (M_w/M_n) were 5.4-8.2 × 10³ and 1.4-1.7, respectively. These polymers exhibited blue photoluminescence in the film states and high fluorescence quantum efficiencies in CHCl₃ (?_fl = 0.70-1.00). The electroluminescence properties of these polymers were investigated by fabricating a PLED device that has a configuration of ITO/PEDOT(PSS)/polymer/CsF/Al. The device fabricated with the random copolymer exhibited highest performances showing a maximum brightness of 8370 cd/m² at 13 V and a maximum efficiency of 2.16 cd/A at 7 V.     

Semicontinuous microemulsion copolymerization of vinyl acetate and butyl acrylate: high solid content and effect of monomer addition rate

Vinyl acetate and butyl acrylate were copolymerized in microemulsion under monomer-starved conditions by a semicontinuous process using different monomer addition rates (R _a). A mixture of sodium dodecyl sulfate and polyethylene glycol dodecyl ether (Brij®35) were used as surfactants. Potassium persulfate was the initiator. High copolymer content latexes (around 40 wt.%), average particle diameters (D _p)?M _w) between 180,000 and 760,000. D _p and M _w of the copolymers decrease as R _a is decreased. As R _a increases, a shoulder in the molar mass distribution was observed at high values of M _w, which was ascribed to chain transfer to polymer. Homogeneous copolymer compositions were observed throughout the reaction, which cannot be obtained by the usual batch process.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer from wild-type Comamonas sp. EB172

Poly(3-hydroxybutyrate) [P(3HB)] homopolymer and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] copolymer was produced by Comamonas sp. EB172 using single and mixture of carbon sources. Poly(3-hydroxyvalerate) P(3HV) incorporation in the copolymer was obtained when propionic and valeric acid was used as precursors. Incorporation of 3HV fractions in the copolymer varied from 45 to 86 mol% when initial pH of the medium was regulated. In fed-batch cultivation, organic acids derived from anaerobically treated palm oil mill effluent (POME) were shown to be suitable carbon sources for polyhydroxyalkanoate (PHA) production by Comamonas sp. EB172. Number average molecular weight (M_n) produced by the strain was in the range of 153-412 kDa with polydispersity index (M_w/M_n) in the range of 2.2-2.6, respectively. Incorporation of higher 3HV units improved the thermal stability of P(3HB-co-3HV) copolymer. Thus the newly isolated bacterium Comamonas sp. EB172 is a suitable candidate for PHA production using POME as renewable and alternative cheap raw materials.     

Synthesis and characterization of novel poly(cycloalkyl methacrylate) bearing fused‐ring structure and its copolymers

A new family of cycloaliphatic fused‐ring acrylic polymers based on 8‐hydroxymethyltricyclo[5.2.1.0^2,6]decane (TCD) has been synthesized by free‐radical polymerization. TCD‐methacrylate (TCD‐MA) was synthesized by reacting TCD with methacrylic acid in toluene via transesterification with p‐toluenesulfonic acid as a catalyst. TCDMA was polymerized in toluene with benzoyl peroxide as a free‐radical initiator at 80 °C. Copolymers were synthesized by polymerizing TCDMA with styrene and methyl methacrylate. The composition of the comonomers was varied from 0 to 100%. Homo‐ and copolymers were characterized by Fourier transform infrared (FTIR) and ¹³C NMR spectroscopy. Molecular weight determination by gel permeation chromatography showed that the polymers were obtained in very high molecular weights in the range of M_n > 50,000 and M_w > 80,000 with relatively low polydispersity. The composition analysis of both the copolymer series were determined by ¹H NMR. The thermal properties of the homo‐ and copolymers were studied with differential scanning calorimetry and all the polymers were found to be amorphous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5617–5626, 2004     

Systhesis of double-hydrophilic core-shell type multiarm star copolymer polyethylenimine-block-poly(2-hydroxyethyl methacrylate

Multiarm star block copolymers hyperbranched polyethylenimine-b-poly(2-hydroxyethyl methacrylate) (HPEI-b-PHEMA) with average 28 PHEMA arms have been prepared by atom transfer radical polymerization (ATRP) of HEMA in a mixed solvent of methanol and water using a core-first strategy. The hyperbranched macroinitiator employed was prepared on the basis of well-defined hyperbranched polyethylenimine with Mw/Mn of 1.04 by amidation with 2-bromo-isobutyryl bromide. The polymerization condition was optimized to prepare star copolymers with narrow dispersity, and the variables included the volume ratio of methanol to water, the molar ratio of initiating site to CuCl and the molar ratio of [CuCl]:[CuBr2]. Under the optimized polymerization condition, the lowest Mw/Mn value of the obtained star copolymers was around 1.3. Kinetic analysis showed that an induction period existed in the polymerization of HEMA. After this induction period, a linear dependence of ln([M]0/[M]t) on time was observed. The obtained HPEI-b-PHEMA could adsorb hydrophilic molecules. The comparison with the star copolymer with hydrophobic core and hydrophilic PHEMA shell verified that both the hydrophilic core and shell could host the hydrophilic guests, but the amidated HPEI core was more effective than the PHEMA shell.     

Study of amphiphilic poly(1-dodecene-co-para-methylstyrene)-graft-poly (ethylene glycol): Part I. Preparation of poly(1-dodecene-co-para-methylstyrene) copolymer and its molecular weight regulation

Poly(1-dodecene-co-para-methylstyrene) copolymers with a broad composition range were prepared by an MgCl₂ supported TiCl₄ catalyst. The effects of temperature and hydrogen on catalyst activity were investigated. It was found that catalyst activity reached a maximum at around 60 °C, and then decreased with the rising temperature. Hydrogen showed an activation effect on the Ziegler-Natta catalyst. ¹H NMR and ¹³C NMR spectra showed that para-methylstyrene (pMS) could be effectively and randomly incorporated into the copolymer chains. The single glass transition indicated there was no block sequence in the copolymer. The copolymerization reaction was examined by the reactivity ratios of comonomers and the relatively low reactivity ratios of 1-dodecene and pMS indicated that both of them had little tendency of consecutive insertion and should be homogeneously distributed in the copolymer chains. Furthermore, the molecular weights of copolymers were regulated by chain transfer agents (diethyl zinc and hydrogen) and temperature. The molecular weights reduced greatly with the addition of diethyl zinc and hydrogen and with the increasing temperature.     

The effect of structure on the thermoresponsive nature of well‐defined poly(oligo(ethylene oxide) methacrylates) synthesized by ATRP

Statistical copolymers of di(ethylene glycol) methyl ether methacrylate (MEO₂MA) and tri(ethylene glycol) methyl ether methacrylate (MEO₃MA) were synthesized by atom transfer radical polymerization (ATRP) providing copolymers with controlled composition and molecular weights ranging from M_n = 8,300–56,500 with polydispersity indexes (M_w/M_n) between 1.19 and 1.28. The lower critical solution temperature (LCST) of the copolymers increased with the mole fraction of MEO₃MA in the copolymer over the range from 26 to 52 °C. The average hydrodynamic diameter, measured by dynamic light scattering, varied with temperature above the LCST. These two monomers were also block copolymerized by ATRP to form polymers with molecular weight of M_n = 30,000 and M_w/M_n from 1.12 to 1.21. The LCST of the block copolymers shifted toward the LCST of the major segment, as compared to the value measured for the statistical copolymers at the same composition. As temperature increased, micelles, consisting of aggregated PMEO₂MA cores and PMEO₃MA shell, were formed. The micelles aggregated upon further heating to precipitate as larger particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 194–202, 2008     

Perfluoromethacrylate-styrene statistical copolymers synthesized in CO2-expanded monomers

Statistical copolymers of perfluoroalkyl ethyl methacrylate (Zonyl-TM) and styrene (S) were synthesized in CO₂-expanded monomer medium at a low initial pressure of 25 MPa. Different Zonyl-TM/S feed ratios were used during copolymerizations, and it was determined that the increase in the Zonyl-TM content and decrease of the CO₂ amount in the comonomer feed resulted in a decrease of the molecular weights of copolymers due to earlier precipitation of copolymers giving shorter chains. The cloudy CO₂-expanded liquid monomer phase was found to be the main loci of copolymerization. In addition, the increase in the Zonyl-TM feed ratio resulted in an increase in the critical degree of the polymerization time (J _crit) as the time when the copolymer chains start to precipitate. The higher the Zonyl-TM content used in the feed, the higher the J _crit time and the lower the weight-average molecular weight (M _w) of the copolymer obtained. Thermal analysis results of the copolymer indicated that the copolymers are stable up to 387–403 °C.     

Surfactant‐free synthesis of amphiphilic copolymer of poly(styrene‐co‐acrylamide) in aqueous emulsion with the assistance of ultrasound

The hydrophilic monomer acrylamide (AM) and hydrophobic monomer styrene (St) have been directly copolymerized in a surfactant‐free aqueous emulsion with the assistance of powerful ultrasound. Fourier Transform Infrared spectrocopy (FT‐IR), nuclear magnetic resonance (NMR), and differential scanning calorimetry (DSC) measurements revealed that copolymers of AM and St were obtained. Elemental analysis was used to calculate the composition of the copolymer. Size exclusion chromatography (SEC) measurement showed that the molecular weight (M_w) of the copolymer is 1.86 × 10⁵ g/mol and the polydispersity index (PDI( = 2.31. The self‐assembly behavior in different solvents was investigated utilizing laser light scattering (LLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM); the copolymer film showed amphiphilicity, as measured by contact angle goniometry. Copyright © 2008 John Wiley & Sons, Ltd.     

n-Octyloxyallene homopolymerization and random copolymerization with styrene using catalyst system composed of lanthanide Schiff-base complexes and Al(i-Bu)3

The catalyst system composed of lanthanide Schiff-base complexes with [3,5-tBu2 -2-(O)C6H2 CH=NC6H5]3 Ln(THF)(Ln(Salen)3 , Ln = Sc, Y, La, Nd, Sm, Gd, Yb) and triisobutyl aluminum shows high activity for n-octyloxyallene (A) homopolymerization with narrow molecular weight distribution (MWD). The influences of reaction conditions on polymerization behavior are investigated, and poly(n-octyloxyallene) has a weight average molecular weight (M w ) of 20.6 × 10 3 with MWD of 1.39 and 100% yield is obtained under the optimum conditions: [Al]/[Y] = 50 mol/mol, [A]/[Y] = 100 mol/mol, with polymerization at 80 ℃ for 16 h in bulk. The kinetic studies of n-octyloxyallene homopolymerization indicate that the polymerization rate is first-order with respect to the monomer concentration and shows some controlled polymerization characteristics. Random copolymer of n-octyloxyallene with styrene is obtained by using the same binary catalyst system; the reactivity ratios of the comonomer determined by Kelen Tüd s method are r A = 1.20 and r St = 0.35, respectively, the ratio of each segment and M w of the resulting copolymer could be controlled by varying the feed ratio of each monomer. Determined by differential scanning calorimetry, the copolymers obtained show only one glass transition temperature, which increases gradually with the increase of styrene content in the copolymer.