Controlled radical polymerization of 2‐hydroxyethyl methacrylate initiated by photofunctional 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid

We demonstrated that density functional theory calculations provide a reliable and quantitative prediction of the trends in C? S bond dissociation energies using several model compounds as photoinitiator. On the basis of this information, we designed a possible photofunctional initiator for the polymerization of hydrophilic vinyl monomers. Photopolymerization of 2‐hydroxyethyl methacrylate (HEMA) hydrophilic monomer was carried out in ethanol initiated by 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid (DTCA) under UV irradiation. We performed the first‐order time‐conversion plots in this polymerization system, and the straight line in the semilogarithmic coordinates indicated first order in monomer. The molecular weight of the poly(2‐hydroxyethyl methacrylate) (PHEMA) increased with increasing conversion. The molecular weight distribution (M_w/M_n) of the PHEMA was about 1.5. Methyl methacrylate (MMA) could also be polymerized in a living fashion with such a PHEMA precursor as a macroinitiator because PHEMA exhibited a dithiocarbamate (DC) group at its terminal end. This system could be applied to the architecture of amphiphilic block copolymers. It was concluded that these polymerization systems proceeded with controlled radical mechanism. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 76–82, 2004     

Core-shell type multiarm star poly(ε-caprolactone) with high molecular weight hyperbranched polyethylenimine as core: Synthesis, characterization and encapsulation properties

Core-shell type multiarm star copolymers with poly(ε-caprolactone) (PCL) as shells and hyperbranched polyethylenimine (PEI) as core have been successfully prepared by the Sn(Oct)₂ catalyzed ring-opening polymerization of ε-caprolactone (CL) using high molecular weigh PEIs directly as macroinitiators. The initiation efficiency is in the range of 91-95% for PEI with M_n = 10⁴ (PEI10K) and only around 60% for PEI with M_n = 2.5 × 10⁴ (PEI25K), leading to star polymers with an average arm number in the range of 155-276. The thermal property of the obtained multiarm star polymers were also investigated by DSC. The melting and crystallization temperatures of the star polymers increase as the PCL arm length increases when the PEI core is fixed. The fusion enthalpy, crystalline enthalpy and degree of crystallinity values of the star polymers with PEI10K core are less than those with PEI1.8K core. Due to the polarity difference between PCL arm and PEI core, the resulting multiarm star polymers can act as inverted micellar nanocapsules capable of extracting and encapsulating water soluble guests. Increasing the size and polarity of the hydrophilic PEI core of the star nanocapsules are two effective ways to enhance their hydrophilic guest encapsulation capacity. Increasing the hydrophobic PCL arm length can increase the molar ratio, whereas reduce the weight ratio of the encapsulated hydrophilic guests to the star nanocapsules. Unexpectedly, the obtained nanocapsules can entrap the bigger size hydrophilic congo red guests more than the smaller size methyl orange.     

Amphiphilic star‐block copolymers based on a hyperbranched core: Synthesis and supramolecular self‐assembly

Novel amphiphilic star‐block copolymers, star poly(caprolactone)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] and poly(caprolactone)‐block‐poly(methacrylic acid), with hyperbranched poly(2‐hydroxyethyl methacrylate) (PHEMA–OH) as a core moiety were synthesized and characterized. The star‐block copolymers were prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization (ATRP). First, hyperbranched PHEMA–OH with 18 hydroxyl end groups on average was used as an initiator for the ring‐opening polymerization of ε‐caprolactone to produce PHEMA–PCL star homopolymers [PHEMA = poly(2‐hydroxyethyl methacrylate); PCL = poly(caprolactone)]. Next, the hydroxyl end groups of PHEMA–PCL were converted to 2‐bromoesters, and this gave rise to macroinitiator PHEMA–PCL–Br for ATRP. Then, 2‐dimethylaminoethyl methacrylate or tert‐butyl methacrylate was polymerized from the macroinitiators, and this afforded the star‐block copolymers PHEMA–PCL–PDMA [PDMA = poly(2‐dimethylaminoethyl methacrylate)] and PHEMA–PCL–PtBMA [PtBMA = poly(tert‐butyl methacrylate)]. Characterization by gel permeation chromatography and nuclear magnetic resonance confirmed the expected molecular structure. The hydrolysis of tert‐butyl ester groups of the poly(tert‐butyl methacrylate) blocks gave the star‐block copolymer PHEMA–PCL–PMAA [PMAA = poly(methacrylic acid)]. These amphiphilic star‐block copolymers could self‐assemble into spherical micelles, as characterized by dynamic light scattering and transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6534–6544, 2005     

Preparation of nanoparticles of double‐hydrophilic PEO‐PHEMA block copolymers by AGET ATRP in inverse miniemulsion

Atom transfer radical polymerization with activators generated by electron transfer initiating/catalytic system (AGET ATRP) of 2‐hydroxyethyl methacrylate (HEMA) was carried out in inverse miniemulsion. Water‐soluble ascorbic acid as a reducing agent and mono‐ and difunctional poly(ethylene oxide)‐based bromoisobutyrate (PEO‐Br) as a macroinitiator were used in the presence of CuBr₂/tris[(2‐pyridyl)methyl]amine (TPMA) and CuCl₂/TPMA complexes. The use of poly(ethylene‐co‐butylene)‐block‐poly(ethylene oxide) as a polymer surfactant resulted in the formation of stable HEMA cyclohexane inverse dispersion and PHEMA colloidal particles. All polymerizations were well‐controlled, allowing for the preparation of well‐defined PEO‐PHEMA and PHEMA‐PEO‐PHEMA block copolymers with relatively high molecular weight (DP > 200) and narrow molecular weight distribution (M_w/M_n < 1.3). These block copolymers self‐assembled to form micellar nanoparticles being 10–20 nm in diameter with uniform size distribution, and aggregation number of ～10 confirmed by atomic force microscopy and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4764–4772, 2007     

Synthesis of water soluble metalloporphyrin-cored amphiphilic star block copolymer photocatalysts for an environmental application

Two series of water-soluble metalloporphyrin-cored amphiphilic star block copolymers were synthesized by controlled radical polymerizations such as atom transfer radical polymerization (ATRP) and reversible addition fragmentation chain transfer (RAFT), which gave eight amphiphilic block copolymer arm chains consisting of poly(n-butyl acrylate-b-poly(ethylene glycol) methyl ether methacylate) (PnBA-b-PEGMEMA, M_n,GPC = 78,000, M_w/M_n = 1.2, 70 wt% of PPEGMEMA) and poly(styrene-b-2-dimethylamino ethyl acrylate) (PS-b-PDMAEA, M_n,GPC = 83,000, M_w/M_n = 1.2, 67 wt% of PDMAEA), yielding porphyrin(Pd)-(PnBA-b-PPEGMEMA)₈ and porphyrin(Pd)-(PS-b-PDMAEA)₈, respectively. Obtained metalloporphyrin polymer photocatalysts were homogeneously solubilized in water to apply to the removal of chlorophenols in water, and was distinguished from conventional water-insoluble small molecular metalloporphyrin photocatalysts. Notably, we found that the water-soluble star block copolymers with hydrophobic–hydrophilic core–shell structures more effectively decomposed the chlorophenol, 2,4,6-trichlorophenol (2,4,6-TCP), in water under visible light irradiation (k = 1.39 h^?1, t_1/2 = 0.5 h) in comparison to the corresponding water-soluble star homopolymer, because the hydrophobic core near the metalloporphyrin effectively captured and decomposed the hydrophobic chlorophenols in water.     

Synthesis of hyperbranched-linear star block copolymers by atom transfer radical polymerization of styrene using hyperbranched poly(siloxysilane) (HBPS) macroinitiator

Hyperbranched-linear star block copolymers, hyperbranched poly(siloxysilane)-block-polystyrene (HBPS-b-PSt), were prepared by atom transfer radical polymerization (ATRP) of styrene in xylene, using bromoester-terminated HBPS (HBPS-Br (P3), M_n = 7500, M_w/M_n = 1.76) as a macroinitiator. The number-average molecular weights of the obtained polymers (M_n) were in the range of 21,800-60,000 and molecular weight distributions were unimodal throughout the reaction (M_w/M_n = 1.28-1.40). These polymers showed 5 wt.% decomposition temperature (T_d5) over 300 °C. The DSC thermograms of the resulting polymers indicated two glass transition temperatures (T_g). The T_g of HBPS segment shifted to higher value while the T_g of PSt segment shifted to lower value compared with those of the homopolymers. Preliminary physical characterization related to the solution viscosity of the resulting block copolymers is also reported.     

Chemical composition effects on the fracture of polystyrene-block-poly(methyl methacrylate)block copolymers

The crazing and fracture behaviors of glassy–glassy block copolymers were investigated for polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) diblock copolymers that had similar overall molecular weights but different poly(methyl methacrylate) (PMMA) molar fractions. A liquid chromatography technique was applied to separate as-synthesized PS-b-PMMA [(1) weight-average molecular weight (M_w) = 94,000 g/mol and PMMA molar fraction = 0.35 and (2) M_w = 65,000 g/mol and PMMA molar fraction = 0.28] into three fractions with different chemical compositions. With a copper-grid technique, the fracture behaviors of 0.5-μm-thick PS-b-PMMA films were studied as a function of the applied strain. For the higher M_w PS-b-PMMA samples, the median strains at crazing and fibril breakdown increased with an increase in the PMMA molar fraction from 0.24 to 0.46, corresponding to an increase in the chain entanglements in the PMMA domains. In contrast, for the lower M_w samples, the two values were not significantly changed even when the PMMA molar fraction was varied from 0.16 to 0.35. M_w of the minor component in PS-b-PMMA played a critical role in controlling the fracture behaviors of the block copolymers. Specifically, M_w/M_e of the minor component (where M_e is the molecular weight between entanglements) had to be roughly larger than 2 for the block copolymers to sustain sufficient strains before fracture. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3612–3620, 2006     

Synthesis of amphiphilic linear‐hyperbranched graft‐copolymers via grafting based on linear polyethylene backbone

The synthesis of amphiphilic linear‐hyperbranched graft‐copolymers in a grafting‐from approach is reported. The linear polyethylene with terminated hydroxyls, prepared by copolymerization of ethylene and 10‐undecen‐1‐ol, was used as macroinitiator for ring‐opening multibranching polymerization of glycidol by a typical slow monomer addition approach. Successful attachment of the hyperbranched grafts to the linear polyethylene backbone was confirmed by ¹H/¹³C NMR, GPC, and TGA. The degree of polymerization and M_w/M_n of hyperbranched grafts were efficiently controlled by temperature, deprotonation ratio as well as the molar ratio of glycidol/hydroxyl (N_glycidol/N_OH). The complicated microstructures caused by unsymmetric glycidol structure were analyzed by DEPT and 2D HSQC spectra, the degree of branching of 0.63–0.66 were calculated, indicating the extent of branch is close to theoretical values. The thermal analysis of linear‐hyperbranched copolymers via TGA and DSC is also presented. To our knowledge, this is the first report of a linear‐hyperbranched graft‐copolymer with a crystalline and nonpolar linear‐polyethylene segment. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2146–2154     

Synthesis of star polymer by atom transfer radical polymerization with resorcinol‐core multifunctional initiator: The construction of nanocapsule via hydrolysis and olefin metathesis reaction of the obtained star polymer

Olefin group‐carrying styrene, 1‐but‐3‐enyl‐4‐vinylbenznene (BVB), was polymerized via atom transfer radical polymerization (ATRP) initiated from C‐methylcalix [4]resorcinarene‐based multifunctional initiator (CRA‐bib) at low conversion to produce star polymer [poly(BVB)] with narrow molecular weight distribution (M_w/M_n < 1.35). The copolymerization of styrene (St) with poly(BVB) (M_n = 11,000, M_w/M_n = 1.23) as a macroinitiator afforded star block copolymer [poly(BVB‐b‐St)] with M_n = 35,000 and M_w/M_n = 1.44. The BVB layer of poly(BVB‐b‐St), located between the St shell and the CRA core, was crosslinked by olefin metathesis reaction of olefin groups o the BVB moieties. The removal of the CRA core of the crosslinked poly(BVB‐b‐St) by hydrolysis using KOH as a base gave polymeric hollow sphere [poly(cored crossBVB‐b‐St)] with good solubility in organic solvents. The morphological structure of the poly(cored crossBVB‐b‐St) showed spherical aggregates in THF by scanning electron microscopy (SEM). Furthermore, the nanocapsule structure of poly(cored crossBVB‐b‐St) with hollow spheres was found to be observed by transmission electron microscopy (TEM). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4879–4888, 2008     

Synthesis,characterization, and rheological properties of multiarm stars with poly(glycidol) core and poly(methyl methacrylate) arms by AGET ATRP

Well‐defined multiarm star block copolymers poly(glycidol)‐b‐poly(methyl methacrylate) (PGOHBr‐b‐PMMA_x) with an average number of PMMA arms of 85, 55, and 45 have been prepared. The core‐first approach has been selected as the methodology using atom transfer radical polymerization (ATRP) of MMA from an activated hyperbranched poly(glycidol) as the core. These activated hyperbranched macroinitiators were prepared by esterification of hyperbranched poly(glycidol) (PGOH) with 2‐bromoisobutyryl bromide. The effect of monomer/initiator ratio, catalyst concentration, time, temperature, and solvent on the growing of the arms has been studied in detail in order to optimize the process and to diminish the radical‐radical coupling. The final products and intermediates were characterized by means of size exclusion chromatography (SEC), nuclear magnetic resonance (NMR) and Fourier transform‐infrared (FTIR) spectroscopy. The length of PMMA arms was determined by SEC after cleavage of ester bond linked to PGOH core. Glass transition temperature (T_g), thermal stability and rheological properties of the multiarm star copolymers were also studied. Finally, tapping mode atomic force microscopy (TMAFM) allowed the clear visualization of nano‐sized particles (80–200 nm) corresponding to individual star molecules. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of Acetylene on the γ-Ray Crosslinking Polymerization of Various Kinds of Acrylic Monomers

The γ-radiation-induced crosslinking polymerization of methyl methacrylate (MMA), methacrylic acid (MAA), 2-hydroxyethyl methacrylate (HEMA), methyl acrylate (MA), and acrylic acid (AA) was carried out in bulk. The polymerization rates of AA and HEMA were much larger than those of other monomers. Acetylene had no influence on the polymerization rate in the initial stage, and the rate was dependent only on the kinds of monomers. In the absence of acetylene, gelation took place in PMA, PAA, and PHEMA obtained at complete conversion, but not in PMMA and PMAA. By the addition of acetylene, complete gelation of PMMA was observed, but no gel formation was observed for PMAA. Volume and weight swelling ratios were measured for PMA, PAA, PHEMA, and PMMA with complete gelation. It was found that by the addition of acetylene the molar concentration of crosslinks increased as much as about twice for PMA and PHEMA, and over about one hundred times for PMMA AND PAA. The relation between volume S_v and weight swelling ratio S_w was studied theoretically. S_v was expressed by the the equation, S_v = (p_p /p+)S_w+ (1 -p_p/p_s), as a function of S_w and the densities of pure polymer (p_p) and solvent (p_s) in swollen polymer.     

Three‐arm star block copolymers of ε‐caprolactone and acrylic acid: Synthesis and micellization behavior

A series of well‐defined three‐arm star poly(ε‐caprolactone)‐b‐poly(acrylic acid) copolymers having different block lengths were synthesized via the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). First, three‐arm star poly(ε‐caprolactone) (PCL) (M_n = 2490–7830 g mol^?1; M_w/M_n = 1.19–1.24) were synthesized via ROP of ε‐caprolactone (ε‐CL) using tris(2‐hydroxyethyl)cynuric acid as three‐arm initiator and stannous octoate (Sn(Oct)₂) as a catalyst. Subsequently, the three‐arm macroinitiator transformed from such PCL in high conversion initiated ATRPs of tert‐butyl acrylate (^tBuA) to construct three‐arm star PCL‐b‐P^tBuA copolymers (M_n = 10,900–19,570 g mol^?1; M_w/M_n = 1.14–1.23). Finally, the three‐arm star PCL‐b‐PAA copolymer was obtained via the hydrolysis of the PtBuA segment in three‐arm star PCL‐b‐P^tBuA copolymers. The chain structures of all the polymers were characterized by gel permeation chromatography, proton nuclear magnetic resonance (¹H NMR), and Fourier transform infrared spectroscopy. The aggregates of three‐arm star PCL‐b‐PAA copolymer were studied by the determination of critical micelles concentration and transmission electron microscope. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Encapsulation of nanomaterials using an intermediary layer cross‐linkable ABC triblock copolymer

For the preparation of core‐shell nanoparticles containing functional nanomaterials, a photo‐cross‐linkable amphiphilic ABC triblock copolymer, poly(ethylene glycol)‐b‐poly(2‐cinnamoyloxyethyl methacrylate)‐b‐poly(methyl methacrylate) (PEG‐PCEMA‐PMMA), was synthesized. This triblock copolymer was then used to encapsulate Au nanoparticles or pyrene. The triblock copolymer of PEG‐b‐poly(2‐hydroxyethyl methacrylate)‐b‐PMMA (PEG‐PHEMA‐PMMA) (M_n = 15,800 g/mol, M_w/M_n = 1.58) was first synthesized by activators generated by electron transfer atom transfer radical polymerization. Its middle block was then functionalized with cinnamoyl chloride. The degrees of polymerization of the PEG, PHEMA, and PMMA blocks were 45, 13, and 98, respectively. PMMA‐tethered Au nanoparticles (with an average diameter of 3.0 nm) or pyrene was successfully encapsulated within the PEG‐PCEMA‐PMMA micelles. The intermediary layers of the micelles were then cross‐linked by UV irradiation. The spherical structures of the PEG‐PCEMA‐PMMA micelles containing Au nanoparticles or pyrene were not changed by the photo‐cross‐linking process and they showed excellent colloidal stability. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4963–4970, 2009     

Core‐shell nanoparticles with hyperbranched poly(arylene‐oxindole) interiors

Core‐shell type star polymers composed of poly(tert‐butyl acrylate) (poly(t‐BuA)) arms and 100% hyperbranched poly(arylene‐oxindole) interiors were synthesized via the “core‐first” method. Atom transfer radical polymerization of t‐BuA initiated by 2‐bromopropionyl terminal groups of the hyperbranched core was applied for the synthesis of the stars. The resultant star structures were characterized by gel permeation chromatography with triple detection. Polymers of molar masses M_n up to 1.68 × 10⁵ g/mol were obtained. The obtained star polymers compared with the linear counterparts of the same molar mass have a much more compact structure in solution. The intrinsic viscosities of the stars are also significantly lower than their linear counterparts. Light scattering experiments were performed to provide information about the size of these macromolecules in solution. Preliminary characterization of the thermal properties of these novel materials is also reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1120–1135, 2009     

Polyisobutylene‐b‐Poly(N,N‐diethylacrylamide) well‐defined amphiphilic diblock copolymer: Synthesis and thermo‐responsive phase behavior

Polyisobutylene‐b‐poly(N,N‐diethylacrylamide) (PIB‐b‐PDEAAm) well‐defined amphiphilic diblock copolymers were synthesized by sequential living carbocationic polymerization and reversible addition‐fragmentation chain transfer (RAFT) polymerization. The hydrophobic polyisobutylene segment was first built by living carbocationic polymerization of isobutylene at ?70 ° C followed by multistep transformations to give a well‐defined (M_w/M_n = 1.22) macromolecular chain transfer agent, PIB‐CTA. The hydrophilic poly(N,N‐diethylacrylamide) block was constructed by PIB‐CTA mediated RAFT polymerization of N,N‐diethylacrylamide at 60 ° C to afford the desired well‐defined PIB‐b‐PDEAAm diblock copolymers with narrow molecular weight distributions (M_w/M_n ≤1.26). Fluorescence spectroscopy, transmission electron microscope, and dynamic light scattering (DLS) were employed to investigate the self‐assembly behavior of PIB‐b‐PDEAAm amphiphilic diblock copolymers in aqueous media. These diblock copolymers also exhibited thermo‐responsive phase behavior, which was confirmed by UV‐Vis and DLS measurements. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1143–1150     

Controlled radical polymerization of 2‐hydroxyethyl methacrylate with a hydrophilic ruthenium complex and the synthesis of amphiphilic random and block copolymers with methyl methacrylate

A hydrophilic ruthenium complex with ionic phosphine ligands { 1 : RuCl₂[P(3‐C₆H₄SO₃Na)(C₆H₅)₂]₂} induced controlled radical polymerization of 2‐hydroxyethyl methacrylate (HEMA) in methanol under homogeneous conditions; the initiator was a chloride (R‐Cl) such as CHCl₂COPh. The number‐average molecular weights of poly(HEMA) increased in direct proportion to monomer conversion, and the molecular weight distributions were relatively narrow (M_w/M_n = 1.4–1.7). A similar living radical polymerization was possible with (MMA)₂‐Cl [(CH₃)₂C(CO₂CH₃)CH₂C(CH₃)(CO₂CH₃)Cl] as an initiator coupled with amine additives such as n‐Bu₃N. In a similar homogeneous system in methanol, methyl methacrylate (MMA) could also be polymerized in living fashion with the R‐Cl/ 1 initiating system. Especially for such hydrophobic polymers, the water‐soluble ruthenium catalyst was readily removed from the polymers by simple washing with an aqueous dilute acid. This system can be applied to the direct synthesis of amphiphilic random and block copolymers of HEMA and MMA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2055–2065, 2002     

Star polystyrene‐b‐hyperbranched polyglycidol: Synthesis and ionic conductivity

In this work, novel star‐hyperbranched block copolymers containing four polystyrene arms and hyperbranched polyglycidol at the end of each arm (sPS‐b‐HPG) have been synthesized. The polystyrene arms were prepared through atom transfer radical polymerization of styrene starting from a four‐arm initiator. The hydroxyl‐terminated PS star polymers served as precursors for the cationic ring‐opening polymerization of glycidol using BF₃·OEt₂ as the catalyst. The chemical structures of these block copolymers were characterized by using ¹H and ¹³C NMR. DSC analysis indicated that the star‐hyperbranched block copolymers exhibited two distinct glass transition temperatures corresponding to the linear PS and the HPG segments, respectively. The addition of LiClO₄ increased the T_g of HPG segments at low concentrations, however, decreased the T_g at high concentrations. The T_g of PS segments was not affected by the addition of salts at all. Furthermore, the interaction of sPS‐b‐HPG with LiBr was studied by using viscosity analysis based on the Jones–Dole equation. The star‐like PS core strengthened the interaction of sPS‐b‐HPG with Li ions that could facile the inhomogeneous distribution of Li cations and anions in different phases, which is important in polymeric electrolytes for lithium chemical power sources. The ionic conductivity of one sPS‐b‐HPG/LiClO₄ electrolyte was measured to be higher than that of HPG/LiClO₄ electrolyte. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 949–958, 2009     

Syntheses of 12‐arm star polymers and star diblock copolymers by nitroxide‐mediated radical polymerization using dendritic dodecafunctional macroinitiators

Dendritic multifunctional macroinitiators having 12 TEMPO‐based alkoxyamines were prepared by the reaction of a benzyl alcohol having 4 TEMPO‐based alkoxyamines with 1,3,5‐tris[(4‐chlorocarbonyl)phenyl]benzene and 1,3,5‐tris(4‐isocyanatophenyl)benzene. Using the dodecafunctional macroinitiators, TEMPO‐mediated radical polymerizations of styrene (St) were carried out at 120 °C, and 12‐arm star polymers ( star‐12 ) with narrow polydispersities of M_w/M_n = 1.06–1.26 were obtained. To evaluate the livingness for the TEMPO‐mediated radical polymerizations of St, hydrolysis of the ester bonds of the 12‐arm star polymers and subsequent SEC measurements were carried out. Furthermore, using star‐12 as the macroinitiator, TEMPO‐mediated radical polymerization of 4‐vinylpyridine (4‐VP) was carried out, and well‐defined poly(St)‐b‐poly(4‐VP) 12‐arm star diblock copolymers with M_w/M_n = 1.18–1.19 were obtained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3689–3700, 2005     

Chain-growth polymerization of azide–alkyne difunctional monomer: Synthesis of star polymer with linear polytriazole arms from a core

This article reports a chain-growth coupling polymerization of AB difunctional monomer via copper-catalyzed azide–alkyne cycloaddition (CuAAC) reaction for synthesis of star polymers. Unlike our previously reported CuAAC polymerization of AB _n (n ≥ 2) monomers that spontaneously demonstrated a chain-growth mechanism in synthesis of hyperbranched polymer, the homopolymerization of AB monomer showed a common but less desired step-growth mechanism as the triazole groups aligned in a linear chain could not effectively confine the Cu catalyst in the polymer species. In contrast, the use of polytriazole-based core molecules that contained multiple azido groups successfully switched the polymerization of AB monomers into chain-growth mechanism and produced 3-arm star polymers and multi-arm hyperstar polymers with linear increase of polymer molecular weight with conversion and narrow molecular weight distribution, for example, M_w/M_n ~ 1.05. When acid-degradable hyperbranched polymeric core was used, the obtained hyperstar polymers could be easily degraded under acidic environment, producing linear degraded arms with defined polydispersity. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 84–90     

Chemoenzymatic synthesis amphiphilic H-shaped copolymer and its self-assembly behavior

ABA triblock copolymers were synthesized by dihydroxyl-capped PEO initiated enzymatic ring-opening polymerization (eROP) of ε-CL in the presence of biocatalyst Novozyme 435. The chains ended with hydroxyl of block copolymers were modified by the esterification of 2,2-dichloro acetyl chloride (DCAC) to obtain the tetrafunctional macroinitiator, which was used in the ATRP of 4-vinylpyridine (4-VP). CuCl/HMTETA was used as the catalyst system in the ATRP of 4-VP to acquire the H-shaped block copolymers (PVP)₂-b-PCL-b-PEG-b-PCL-b-(PVP)₂. The H-shaped block copolymers were characterized by FTIR, NMR, and GPC. Copolymers with high molecular weights (M _n = 46121 g/mol) and low polydispersities (M _w/M _n = 1.30) were prepared. Moreover, the morphology of the copolymer was examined with dynamic light scattering (DLS) and atomic force microscopy (AFM). Spherical micelles with a diameter of 70 nm in aqueous solution were obtained.