Design of water-soluble block copolymers containing poly(4-vinylpyridine) by atom transfer radical polymerization

The preparation of block copolymers consisting of poly(4-vinylpyridine) (P4VP) by atom transfer radical polymerization (ATRP) was investigated. The goal was to synthesize water-soluble block copolymers with poly(ethylene oxide) (PEO) as first block, a water-soluble polymer at any pH. First, a PEO macroinitiator was prepared for the ATRP block copolymerization of 4-vinylpyridine. In the second stage, the kinetic behaviour of this block copolymerization was investigated for two different types of PEO-macroinitiators and catalyst systems, based on CuCl or CuCl₂/Cu(0), with tris[2-(dimethylamino)ethyl]amine (Me₆-TREN) as the ligand. Various combinations of initiator and catalyst led to a controlled block copolymerization with optimized results obtained for chlorinated poly(ethylene glycol) monomethyl ether as macroinitiator, together with CuCl₂/Cu(0)/Me₆-TREN as catalyst system. With the latter system, narrow polydispersities (1.25) could be reached for PEO-P4VP block copolymers.     

Synthesis of basic molecular brushes: ATRP of 4-vinylpyridine in organic media

A poly(2-(2-bromopropionyloxy)ethyl methacrylate) (PBPEM) was used as macroinitiator in the synthesis of molecular brushes with poly(4-vinylpyridine) side chains, (P(BPEM-g-4VP). Atom transfer radical polymerization (ATRP) was employed as the polymerization technique. The polymerizations were carried out in DMF at 30 °C using a copper-chloride-based ATRP catalyst, which converted all the dormant polymer chain ends to alkyl chloride groups, thus minimizing branching and crosslinking, which occurred when a copper bromide-based catalyst was employed. Tris(2-pyridylmethyl)amine was selected as the ligand due to the high activity of its Cu^I complex in ATRP as well as its strong binding to both Cu^I and Cu^II, which prevented competitive complexation of the monomer or polymer to the metal center. In order to prevent crosslinking via radical coupling, the monomer conversion was kept low (under 3%) and the alkyl chloride end groups of P4VP side chains were converted to alkoxyamines upon activation followed by a reaction with TEMPO radical. Dynamic light scattering measurements showed the hydrodynamic diameter (D_H) of the brushes was pH-dependent. Aggregation of single P(BPEM-g-4VP) brushes in water was very pronounced at high pH values but was observed even when the amount of added HCl was enough to completely protonate the pyridine units (D_H = 278 nm).     

A Copper-Based Reverse ATRP Process for the Living Radical Polymerization of 4-Vinylpyridine: Discussion on Optimum Reaction Conditions

In this original experiment, reverse atom transfer radical polymerization technique using CuCl₂/hexamethyl tris[2-(dimethylamino)ethyl]amine (Me₆-TREN) as catalyst complex was applied to living radical polymerization of 4-vinylpyridine (4VP) with azobisisobutyronitrile (AIBN) as initiator. N,N-Dimethylformamide was used as solvent to improve the solubility of the reaction system. The polymerization not only showed the best control of molecular weight and its distribution, but also provided a rather rapid reaction rate with the molar ratio of [4VP]:[AIBN]:[CuCl₂]:[Me₆-TREN] = 400:1:2:2. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 51.5 kJ· mol¹. Use of Cl as the halogen in copper halide had many advantages over the use of Br. The resulting poly(4-vinylpyridine) was successfully used as the macroinitiator to proceed the block polymerization of styrene in the presence of CuCl/Me₆-TREN catalyst complex via a conventional ATRP process in DMF.     

Preparation of P4VP-g-PSt Copolymer Microspheres with Controllable Size by Atom Transfer Radical Polymerization Synthesized Poly(4-vinylpyridine) Macromonomer

Poly(4‐vinylpyridine) macromonomer (St‐P4VP) with a styryl end group was synthesized by atom transfer radical polymerization (ATRP) of 4‐vinylpyridine using p‐(chloromethyl)styrene (CMSt) as functional initiator, CuCl as catalyst and tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as ligand in 2‐propanol. The structure of St‐P4VP macromonomer was identified by proton nuclear magnetic resonance (¹H NMR). The result of gel permeation chromatography (GPC) illustrated that the number‐average molecular weight of St‐P4VP could be controlled by adjusting polymerization conditions. Poly(4‐vinylpyridine) grafted polystyrene microspheres (P4VP‐g‐PSt) were then prepared by dispersion copolymerization of styrene with St‐P4VP macromonomers. The effects of polymerization reaction parameters such as medium polarity, concentration of St‐P4VP macromonomer and polymerization temperature on the sizes and size distribution of P4VP‐g‐PSt microspheres were investigated. The results of transmission electron microscopy (TEM), scanning electron microscopy (SEM) and laser light scattering (LLS) indicated that mono‐dispersed P4VP‐g‐PSt microspheres with average diameters of 100–200 nm could be obtained when the molar ratio of St to St‐P4VP was 0.25:100 in ethanol/water mixed solvents (V/V=80:20) at 60°C. Such kind of graft copolymer microspheres was expected to be applied to many fields such as drug delivery system and protein adsorption/separation system due to their particular structure.     

Study on the polymerizations of methyl methacrylate and styrene initiated with chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine

Methyl methacrylate (MMA) and styrene (St) have been radically polymerized in the presence of chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine (Me₃SiCl/CuCl/PMDETA). An analysis of the resultant polymers by ¹H NMR discloses terminal silyl group and chlorine atom in all the obtained polymers. Kinetics studies have been carried out by measuring monomer conversions and polymer molecular weights against polymerization time. The results indicate that, for both MMA and St polymerizations, the monomer conversions exhibit a quasi-linear relationship with polymerization time, and the polymer number-average molecular weight (M_n) also increases with monomer conversion. The molecular weights of both PS and PMMA exceed one hundred thousand. Regardless of molecular weight, all the polymers show narrow molecular distributions (M_w/M_n = 1.2-1.5). These polymerization reactions are speculated to follow a mechanism similar to that of atom transfer radical polymerization (ATRP).     

Adsorption of poly(N-isopropylacrylamide-co-4-vinylpyridine) onto core-shell poly(styrene-co-methylacrylic acid) microspheres

Adsorption of the thermoresponsive copolymer of poly(N-isopropylacrylamide-co-4-vinylpyridine) (PNIPAM-co-P4VP) onto the core-shell microspheres of poly(styrene-co-methylacrylic acid) (PS-co-PMAA) is studied. The core-shell PS-co-PMAA microspheres are synthesized by one-stage soap-free polymerization in water. The copolymer of PNIPAM-co-P4VP is synthesized by free radical polymerization of N-isopropylacrylamide and 4-vinylpyridine in the mixture of DMF and water using K₂S₂O₈ as initiator. Adsorption of PNIPAM-co-P4VP onto the core-shell PS-co-PMAA microspheres results in formation of the composite microspheres of PS/PMAA-P4VP/PNIPAM. The driven force to adsorb the copolymer of P4VP-co-PNIPAM onto the core-shell PS-co-PMAA microspheres is ascribed to hydrogen-bonding and electrostatic affinity between the P4VP and PMAA segments. The resultant composite microspheres of PS/PMAA-P4VP/PNIPAM with surface chains of PNIPAM are thermoresponsive in water and show a cloud-point temperature at about 33 °C.     

Atom-transfer radical reactions catalyzed by a coordinatively unsaturated diruthenium amidinate, [(η-C5Me5)Ru(μ2-i-PrNC(Me)Ni-Pr)Ru(η-C5Me5)]

Atom-transfer radical cyclization (ATRC) and addition (ATRA) catalyzed by a coordinatively unsaturated diruthenium amidinate complex 4, [(η⁵-C₅Me₅)Ru(μ₂-i-PrNC(Me)Ni-Pr)Ru(η⁵-C₅Me₅)]⁺, are investigated, and their features are compared with those of atom-transfer radical polymerization (ATRP). As an example of ATRC, a cationic diruthenium amidinate 4 is found to exhibit excellent catalytic reactivity for the cyclization of N-allyl α-halogenated acetamides including an alkaloid skeleton at ambient temperature. A catalytic species generated in situ from a halide complex, (η⁵-C₅Me₅)Ru(μ₂-i-PrNC(Me)Ni-Pr)Ru(η⁵-C₅Me₅)(X) [X=Cl, Br] and sodium salts of weakly coordinating anions such as NaPF₆ and NaBPh₄ also shows high catalytic activity; this actually provides a solution for a problematic instability of 4 as the practical catalyst. The in situ-generated catalyst species 4 is also active towards the intermolecular ATRA of α,α,γ-trichlorinated γ-lactam with alkenes at rt to afford the corresponding α-alkylated γ-lactams in moderate yields. Examination of ATRP of methyl methacrylate (MMA) showed that both the isolated 4 [Y=PF₆] and in situ-generated 4 [Y=PF₆] are effective for the polymerization of MMA in the presence of 2-bromoisobutylate as the initiator. Use of the isolated catalyst results in controlled polymerization at initial stage of the reaction; in contrast, the polymerization with in situ-generated catalyst produces poly(MMA) with wide molecular weight distribution. The isolated catalyst 4 is powerful for the activation of a C-Br bond of macromolecule initiators; BrCMe₂CO₂[O(CH₂)₄]_n-n-Bu (M_n=3800; M_w/M_n=1.2) initiated ATRP of MMA even at 25 °C to afford the poly(THF)-poly(MMA) block copolymer of M_n=26,000 and M_w/M_n=1.2 with the aid of 4. The roles of the coordinatively unsaturated ruthenium species for these reactions are discussed.     

Bis(pyrrolide-imine) Ti complexes with MAO: A new family of high performance catalysts for olefin polymerization

This contribution reports on the syntheses, structures and olefin polymerization behavior of Ti complexes having a pair of chelating pyrrolide-imine [N⁻,N] ligands. X-ray analyses as well as ¹H NMR studies demonstrate that bis(pyrrolide-imine) Ti complexes (named PI Catalysts) contain approximately octahedrally coordinated metal centers with mutually trans-pyrrolide-Ns, cis-imine-Ns and cis-Cls. DFT studies suggest that PI Catalysts, when activated, provide a metal alkyl in the cis position to a vacant coordination site for monomer binding. These theoretical studies also show that the active species derived from PI Catalysts normally possess higher electrophilicity and a sterically more open nature compared with those produced using bis(phenoxy-imine) Ti complexes (Ti-FI Catalysts) which are known as high performance olefin polymerization catalysts. These structural as well as electronic features suggest that PI Catalysts have high potential for the polymerization of olefinic monomers.Unlike high performance Ti-FI Catalysts, PI Catalysts do not require the presence of steric bulk in close proximity to the anionic donor. PI Catalysts combined with MAO display high ethylene polymerization activities (max. 33,200 kg-polymer/mol-cat/h, 25 °C, atmospheric pressure) comparable to those obtained with early group 4 metallocene catalysts (e.g., Cp₂TiCl₂ 16,700 kg-polymer/mol-cat/h) under identical conditions. As expected, PI Catalysts exhibit higher incorporation capability for propylene and 1-hexene relative to FI Catalysts though the incorporation levels are lower than those for Cp₂TiCl₂. To our surprise, PI Catalysts/MAO show remarkably high norbornene (NB) incorporation, superior to that seen with the [Me₂Si(Me₄Cp)N-tBu]TiCl₂ (CGC) catalyst system, and they readily form ethylene-NB copolymers with high NB contents. The highly electrophilic and sterically open nature is probably responsible for the high NB affinity. Additionally, PI Catalysts/MAO possess characteristics of living ethylene polymerization (though under limited conditions) and afford high molecular weight PEs with very narrow molecular weight distributions (M_n 225,000, M_w/M_n 1.15, 10-s polymerization, 25 °C). Moreover, these catalysts can copolymerize ethylene and NB in a highly controlled living manner to afford monodisperse alternating copolymers with very high molecular weights (M_n > 500,000, M_w/M_n < 1.2) at room temperature. This unique living nature allows the preparation of a number of ethylene- and NB-based block copolymers, including PE-b-poly(ethylene-co-NB) and poly(ethylene-co-NB)_a-b-poly(ethylene-co-NB)_b, in which each segment contains a different NB content. These are probably the first examples of the syntheses of block copolymers from ethylene and NB. Consequently, the discovery and application of PI Catalysts has exercised a significant influence on olefin polymerization catalysis and polymer synthesis.     

Synthesis of hyperbranched-linear star block copolymers by atom transfer radical polymerization of styrene using hyperbranched poly(siloxysilane) (HBPS) macroinitiator

Hyperbranched-linear star block copolymers, hyperbranched poly(siloxysilane)-block-polystyrene (HBPS-b-PSt), were prepared by atom transfer radical polymerization (ATRP) of styrene in xylene, using bromoester-terminated HBPS (HBPS-Br (P3), M_n = 7500, M_w/M_n = 1.76) as a macroinitiator. The number-average molecular weights of the obtained polymers (M_n) were in the range of 21,800-60,000 and molecular weight distributions were unimodal throughout the reaction (M_w/M_n = 1.28-1.40). These polymers showed 5 wt.% decomposition temperature (T_d5) over 300 °C. The DSC thermograms of the resulting polymers indicated two glass transition temperatures (T_g). The T_g of HBPS segment shifted to higher value while the T_g of PSt segment shifted to lower value compared with those of the homopolymers. Preliminary physical characterization related to the solution viscosity of the resulting block copolymers is also reported.     

Synthesis of tertiary-butyl acrylate polymers and preparation of diblock copolymers using atom transfer radical polymerization

The synthesis of tert-butyl acrylate by atom transfer radical polymerization (ATRP) is reported. This polymer was prepared using FeCl₂ · 4H₂O(PPh₃)₂ catalyst system in conjunction with methyl 2-bromopropionate as initiator, in bulk and in solution using acetone as a solvent. The addition of solvent was necessary in order to decrease the polymerization rate and to afford low polydispersity polymers. The number-average molecular weights of the resulting polymers increased in direct proportion to the monomer conversion, and the polydispersities (M_w/M_n) were as low as 1.2. In addition, the preparation of an AB diblock copolymer of poly (n-butyl methacrylate)-block-poly (tert-butyl acrylate) by ATRP is reported. The resulting polymers and copolymers were characterized by means of size exclusion chromatography and ¹H-NMR Spectroscopy.     

Synthesis and characterisation of new shell cross-linked micelles with amine-functional coronas

Shell cross-linked (SCL) micelles with amine-functional coronas have been constructed in aqueous solution by exploiting the micellar self-assembly of new thermo-responsive ABC triblock copolymers. These copolymers were prepared via atom transfer radical polymerisation (ATRP) in convenient one-pot syntheses and comprised a thermo-responsive core-forming poly(propylene oxide) [PPO] block, a cross-linkable central poly(glycerol monomethacrylate) [GMA] block and an amine-functional outer block based on either poly(2-(dimethylamino)ethyl methacrylate) [DMA] or poly([2-(methacryloyloxy)ethyl]trimethyl ammonium chloride) [QDMA]. DMF GPC analysis indicated an M_n of 17,700 and an M_w/M_n of 1.46 for the PPO-PGMA-PDMA triblock copolymer. The DMA residues of the PPO-PGMA-PDMA triblock copolymer were reacted with methyl iodide to prepare copolymers with differing degrees of quaternisation. Each triblock copolymer dissolved molecularly in aqueous solution at 5 °C and formed micelles with amine-functional coronas above a critical micelle temperature (CMT) of around 12 °C, which corresponded closely to the cloud point of the PPO macro-initiator. Cross-linking of the GMA residues in the inner shell using divinyl sulfone produced SCL micelles that remained intact at 5 °C, i.e. below the cloud point of the core-forming PPO block. Aqueous electrophoresis studies confirmed that these SCL micelles had considerable cationic surface charge, as expected. The cationic SCL micelles were adsorbed onto a near-monodisperse anionic silica sol, which was used as a model colloidal substrate. Thermogravimetric analyses indicated SCL micelle mass loadings of 6.1-15.5 wt.%, depending on the initial micelle concentration. Aqueous electrophoresis studies confirmed that surface charge reversal occurred on adsorption of the SCL micelles and scanning electron microscopy studies revealed the presence of SCL micelles on the silica particles.     

聚甲基丙烯酸甲酯-聚甲基丙烯酸两亲性嵌段共聚物的制备及自组装形态的研究

以2-溴异丁酸乙酯为引发剂, 氯化亚铜/联二吡啶为催化剂, 通过原子转移自由基聚合(ATRP)获得分子链末端含一个α-溴原子的聚甲基丙烯酸甲酯(PMMA-Br), 以此为大分子引发剂引发甲基丙烯酸铅[Pb(MA)₂]单体进行ATRP反应, 制得P[MMA-b-Pb(MA)_2]嵌段共聚物, 将此共聚物在盐酸中进行离子交换即得聚甲基丙烯酸甲酯-聚甲基丙烯酸的两亲性嵌段共聚物[P(MMA-b-MAA)]. 用FTIR, GPC, NMR和SEM方法对共聚物进行了表征.     

Systhesis of double-hydrophilic core-shell type multiarm star copolymer polyethylenimine-block-poly(2-hydroxyethyl methacrylate

Multiarm star block copolymers hyperbranched polyethylenimine-b-poly(2-hydroxyethyl methacrylate) (HPEI-b-PHEMA) with average 28 PHEMA arms have been prepared by atom transfer radical polymerization (ATRP) of HEMA in a mixed solvent of methanol and water using a core-first strategy. The hyperbranched macroinitiator employed was prepared on the basis of well-defined hyperbranched polyethylenimine with Mw/Mn of 1.04 by amidation with 2-bromo-isobutyryl bromide. The polymerization condition was optimized to prepare star copolymers with narrow dispersity, and the variables included the volume ratio of methanol to water, the molar ratio of initiating site to CuCl and the molar ratio of [CuCl]:[CuBr2]. Under the optimized polymerization condition, the lowest Mw/Mn value of the obtained star copolymers was around 1.3. Kinetic analysis showed that an induction period existed in the polymerization of HEMA. After this induction period, a linear dependence of ln([M]0/[M]t) on time was observed. The obtained HPEI-b-PHEMA could adsorb hydrophilic molecules. The comparison with the star copolymer with hydrophobic core and hydrophilic PHEMA shell verified that both the hydrophilic core and shell could host the hydrophilic guests, but the amidated HPEI core was more effective than the PHEMA shell.     

Synthesis of block and graft copolymers of β-pinene and styrene by transformation of living cationic polymerization to atom transfer radical polymerization

The transformations of living cationic polymerization to ATRP to form the block and graft copolymers of β-pinene with styrene were performed. Poly(β-pinene) carrying benzyl chloride terminal [poly(β-p)StCl] was prepared by capping the living poly(β-pinene), which was obtained with 1-phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, with a few units of styrene. Poly(β-p)StCl, in conjunction with CuCl and bpy, could initiate the ATRP of styrene and gave well-defined block copolymer of β-pinene and styrene. In contrast, tert-alkyl-chlorine-capped poly(β-pinene) [poly(β-p)Cl] obtained by living cationic polymerization of β-pinene per se without capping of styrene gave a mixture of desired block copolymers and unreacted poly(β-p)Cl due to the low initiating reactivity of poly(β-p)Cl. Brominated poly(β-pinene) synthesized by the quantitative bromination of poly(β-pinene) using NBS was also used to initiate the ATRP of styrene in the presence of CuBr and bpy to prepare the graft copolymer of β-pinene and styrene. The first-order kinetic characteristic and linear increment of molecule weight with the increasing of monomer conversion indicated the living nature of this ATRP grafting.     

The synthesis and solution behaviors of novel amphiphilic block copolymers based on d-galactopyranose and 2-(dimethylamino)ethyl methacrylate

A series of novel stimuli-responsive AB, ABA, and BAB type block copolymers based on 6-O-methacryloyl-1,2:3,4-di-O-isopropylidene-d-galactopyranose (MAIpGP:A block) and 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA: B block) were synthesized via ATRP techniques using ethyl 2-bromoisobutyrate (EBiB) as monofunctional ATRP initiator in the case of diblock copolymer and diethyl meso-2,5-dibromoadipate (DEDBA) as bifunctional ATRP initiator in the case of triblock copolymers. The PMAIpGP blocks of the AB, ABA, and BAB type linear block copolymers were converted to water soluble PMAGP blocks via deprotection process under mild acidic conditions. Both proton NMR and DLS studies demonstrated that block copolymers were temperature-sensitive, whereby the lower critical solution temperature (LCST) of polymers varied with the polymerization degrees of comonomers in the block copolymers. LCST was determined to be between ∼35 °C and 55 °C depending on the type and the comonomer compositions of the block copolymers. It was observed that an increase on the percentage of hydrophilic PMAGP block in block copolymer caused an increase on the LCST value as expected.     

Atom transfer radical polymerization of (meth)acrylates and their novel block copolymers with vinyl acetate

Homopolymerization of methyl acrylate (MA) and methyl methacrylate (MMA) by atom transfer radical polymerization (ATRP) were carried out at 90 °C using methyl-2-bromopropionate (MBP) as initiator, copper halide (CuX, X=Cl, Br) as catalyst, 2,2^′-bipyridine (bpy) or N,N,N^′,N^′,N^″-pentamethyldiethylenetriamine (PMDETA) as ligand in 1-butanol (less polar and containing OH) and acetonitrile (more polar) solvents. It was found that with CuCl/bpy catalyst ATRP of MA and MMA in 1-butanol proceeded faster than that in acetonitrile. The rate of ATRP of MA and MMA in acetonitrile and 1-butanol was comparable when CuCl/PMDETA used as catalyst system. The number-average molecular weights increased with conversion and polydispersities were low . The ATRP of MA and MMA with vinyl acetate telomer having trichloromethyl end group (PVAc-CCl₃) were also used to synthesize new block copolymers. The structures and molecular weight of synthesized PVAc-b-PMA and PVAc-b-PMMA were characterized by ¹H NMR, FTIR spectroscopy and gel permeation chromatography (GPC) and shown that the block copolymers were novel.     

Atom transfer radical polymerization of a novel quinoline derivative monomer and fluorescent property

A novel functional monomer incorporating quinoline derivative moiety as the side group, 2-[4-(2,7,7-trimethyl-3-ethoxycarbonyl-5-oxo-1,4,5,6,7,8-hexhydricquinoline)phenoxyl] ethylmethacrylate (HQPEMA), was synthesized and polymerized utilizing atom transfer radical polymerization (ATRP) technique. 2-(4-Chloromethylphenyl)benzoxazole (CMPB) and CuCl/PMDETA were used as the initiator and catalyst, respectively. GPC, ¹H NMR and fluorescent emission spectroscopy were conducted for characterization of polymers. The linear increase of number average molecular weight (M_n) versus conversion and the relatively narrow molecular weight distribution (M_w/M_n) of the obtained polymers confirmed that ATRP of HQPEMA was carried out successfully. In addition, the fluorescence “structural self-quenching effect” was observed in the DMF solution of the monomer HQPEMA, which bearing both electron-donating chromophore group and electron-accepting CC bond. We also found that the fluorescence properties of the newly obtained polymers containing quinoline chromophore depended on both the monomer concentration in solution and the polarity of solvents. The emission of the polymer film showed that the emission peak maxima of the polymer film shifted 50 nm towards high wavelength with respect to the polymer in DMF solution due to the intermolecular or intramolecular interactions of the polymer chains.     

Controlled polymerization of (meth)acrylamides by atom transfer radical polymerization

Controlled polymerization of (meth)acrylamides was achieved by ATRP using the initiating system methyl 2‐chloropropionate/CuCl/tris(2‐dimethylaminoethyl)amine. Linear increase of molecular weights with conversion and low polydispersity (M_w/M_n < 1.2) were obtained in toluene, at room temperature, when N,N‐dimethylacrylamide was used as a monomer. However, the polymerization reached limited conversion, which could be enhanced by increasing the catalyst/initiator ratio. The limited conversion is not due to the loss of the active chains, but rather to the loss of activity of the catalytic system.     

A versatile synthesis of poly(lauryl acrylate) using N-(n-octyl)-2-pyridylmethanimine in copper mediated living radical polymerization

A facile synthesis of poly(lauryl acrylate) has been achieved by atom transfer radical polymerization using benzyl-2-bromoisobutyrate, copper (I) bromide, and N-(n-octyl)-2-pyridylmethanimine (OPMI). The latter was of great interest as its synthesis was very easy to carry out and as it allowed the reaction mixture to be homogeneous, which was essential for the control of the reaction. The polymerization was controlled under these conditions and was optimized with the addition of copper (II) bromide as deactivator. We proved that the synthesis of poly(lauryl acrylates) with well defined molecular weights and narrow polydispersities was possible using a ligand which does not require difficult synthesis and purification. We also showed the ability of pyridylmethanimine ligands to control ATRP of an acrylate derivative. Best results were obtained at 130 °C in xylene for [Initiator]₀/[Cu(I)Br]₀/[Cu(II)Br₂]₀/[OPMI]/[lauryl acrylate] equal to 1/1/0.05/2.2/181, respectively (M_n = 19,942, DPI = 1.28).     

Viscosimetric behaviour of hydrolyzed polyacrylamide-poly(4-vinylpyridine) [AD37-P4VP] mixture in aqueous solution

The interactions between 27% hydrolyzed polyacrylamide [AD37] and poly(4-vinylpyridine) [P4VP], in aqueous solutions and at neutralization degree α = 1, were studied by using viscosimetry technique.The reduced viscosities of these copolymer mixture solutions, at 25 °C, reach several orders of magnitude higher than the reduced viscosity of each polymer taken separately, and according to the ratio R of the chain numbers.Intermolecular electrostatic associations are favoured by increasing the P4VP concentration corresponding to high R values. Thus, mixtures rich in P4VP are characterized by a high decrease in the viscosity due to interpolymer complete complexation AD37-P4VP, leading to the totally contraction or collapse of the polymer chains. Strongest reduced viscosities, due to the inter-chain AD37 associations, are observed for the mixtures poor in P4VP (so the weakest ratios R of the chain numbers).In order to understand the relative effects of these two polymers on the reduced viscosity, two mixtures containing the same total quantity are compared. Reduced viscosities of each copolymer alone strongly increase by dilution of the aqueous solution. In the case of the mixture, an opposite behaviour is observed with a reduction in the reduced viscosity by dilution. So, the increase of the reduced viscosity according to AD37 concentration, at α constant, shows an intra and an inter-chain associative phenomenon.