Fractional order fixed-time nonsingular terminal sliding mode synchronization and control of fractional order chaotic systems

This paper presents fractional order fixed-time nonsingular terminal sliding mode control for stabilization and synchronization of fractional order chaotic systems with uncertainties and disturbances. First, a novel fractional order terminal sliding mode surface is proposed to guarantee the fixed-time convergence of system states along the sliding surface. Second, a nonsingular terminal sliding mode controller is designed to force the system states to reach the sliding surface within fixed-time and remain on it forever. Furthermore, the fractional Lyapunov stability theory is used to prove the fixed-time stability and the robustness of the proposed control scheme and estimate the upper bound of convergence time. Next, the proposed control scheme is applied to the synchronization of two nonidentical fractional order Liu chaotic systems and chaos suppression of fractional order power system. Simulation results verify the effectiveness of the proposed control scheme. Finally, some application issues about the proposed scheme are discussed.

     

Fuzzy observer-based command filtered tracking control for uncertain strict-feedback nonlinear systems with sensor faults and event-triggered technology

For the trajectory tracking problem of nth-order uncertain nonlinear systems with sensor faults, a fuzzy controller based on command filtered and event-triggered technology is designed to improve the tracking error of the system. Concurrently, a fault-tolerant control scheme is introduced to effectively solve the problem of sudden output sensor failure. Additionally, the proposed controller can also greatly avoid complexity explosion problem of derivations of virtual control laws, which makes the design of the controller simpler. Furthermore, an effective observer is designed to solve the problem of system state immeasurability. Therefore, the proposed control scheme makes the design of the controller more convenient and flexible. According to Lyapunov stability theory, it is proved that all closed-loop signals are uniformly and ultimately bounded. Finally, two simulation examples of second-order nonlinear system and single-link robot show the effectiveness of the proposed scheme.

     

Variable structure based robust backstepping controller design for nonlinear systems

This study presents robust control architecture in the sense of variable structure control via a backstepping design. By using systematic backstepping design techniques, closed-loop behavior of an n-order nonlinear system can be transformed into a stability and convergence problem of a fast switched 2nd order system. There are two main parts contained within the proposed control algorithm; one is a nominal control effort generated according to the Lyapunov stability criterion during recursive backstepping processes, and the other belongs to a smooth robust control law designed to eliminate the effects of unknown lumped perturbations. Finally, a Genesio system is used as an illustrated example to demonstrate the robustness of the control algorithm. The feasibility and properties of the proposed method are given by numerical simulations.     

线性时滞系统的离散最优控制

介绍了对线性时滞系统进行最优控制的设计，将具有时滞控制的线性系统离散后引入增广状态向量。获得不显含时滞的差分方程，根据时滞量的两种分类情况采用连续和离散形式的性能指标函数导出了最优控制律。控制律包含当前状态和此前若干步状态向量的叠加，最优控制律直接从时滞方程中得到，可保证系统的稳定性，此方法亦适用于大时滞的情况。数值算例验证了控制策略的有效性。     

Distributed time-varying formation tracking of multi-quadrotor systems with partial aperiodic sampled data

In this article, a distributed formation tracking controller is proposed for Multi-agent systems (MAS) consisting of quadrotors. It is considered that each quadrotor in the MAS only shares its translation position information with its neighbors. Moreover, position information is transmitted at nonuniform and asynchronous time instants. The control system is divided into an outer-loop for the position control and an inner-loop for the attitude control. A continuous-discrete time observer is used in the outer-loop to estimate both position and velocity of the quadrotor and its neighbors using discrete position information it receives. Then, these estimated states are used to design the position controller in order to enable quadrotors to generate the required geometric shape. A finite-time attitude controller is designed to track the desired attitude as dictated by the position controller. Finally, a closed-loop stability analysis of the overall system including nonlinear coupling is performed.

     

Dynamics and optimal control of multibody systems using fractional generalized divide-and-conquer algorithm

In this paper, a new framework is presented for the dynamic modeling and control of fully actuated multibody systems with open and/or closed chains as well as disturbance in the position, velocity, acceleration, and control input of each joint. This approach benefits from the computed torque control method and embedded fractional algorithms to control the nonlinear behavior of a multibody system. The fractional Brunovsky canonical form of the tracking error is proposed for a generalized divide-and-conquer algorithm (GDCA) customized for having a shortened memory buffer and faster computational time. The suite of a GDCA is highly efficient. It lends itself easily to the parallel computing framework, that is used for the inverse and forward dynamic formulations. This technique can effectively address the issues corresponding to the inverse dynamics of fully actuated closed-chain systems. Eventually, a new stability criterion is proposed to obtain the optimal torque control using the new fractional Brunovsky canonical form. It is shown that fractional controllers can robustly stabilize the system dynamics with a smaller control effort and a better control performance compared to the traditional integer-order control laws.

     

Prescribed-time adaptive neural tracking control for a class of uncertain robotic manipulators with dead zone input

This paper solves the prescribed-time control problem for a class of robotic manipulators with system uncertainty and dead zone input. To make the system stable within a given convergence time T, a novel prescribed-time adaptive neural tracking controller is proposed by using the temporal scale transformation method and Lyapunov stability theory. Unlike the finite-time and the fixed-time stability where the convergence time depends on the controller parameters, the convergence time constant T is introduced into the proposed controller so that the closed-loop system will be stable within T. To cope with the system uncertainty, radial basis function neural networks (RBFNNs) are used and only need to update one parameter online. In addition, by choosing the same structure and parameters of RBFNNs, the proposed method can shorten the convergence time of the neural networks. Finally, simulation results are presented to demonstrate the effectiveness of the prescribed-time controller.

     

Passive-based adaptive control with the full-order observer for induction motor without speed sensor

The conventional linear control methods are difficult to meet the control requirements of high-performance speed regulation of asynchronous motor due to the nonlinear and multi-variable problems of induction motor. A passive-based control method of induction motor with the full-order state observer is proposed with the Euler–Lagrange equation of motion of the induction motor. Based on the relationship between passivity and stability of induction motor, the state feedback is used for torque and speed tracking. The full-order state observer is adopted with rotor current and rotor flux as state variables, and the adaptive speed controller is designed to realize the passive-based control. The experimental results show that the errors between the estimated value based on the proposed full-order observer and the actual value of rotor current, speed and flux are small; the speed with the proposed adaptive control can reach the expected value quickly. The proposed control method can effectively meet the high-performance requirements of induction motor.

     

Fractional-order PD control at Hopf bifurcations in a fractional-order congestion control system

In this paper, we address the problem of the bifurcation control of a delayed fractional-order dual model of congestion control algorithms. A fractional-order proportional–derivative (PD) feedback controller is designed to control the bifurcation generated by the delayed fractional-order congestion control model. By choosing the communication delay as the bifurcation parameter, the issues of the stability and bifurcations for the controlled fractional-order model are studied. Applying the stability theorem of fractional-order systems, we obtain some conditions for the stability of the equilibrium and the Hopf bifurcation. Additionally, the critical value of time delay is figured out, where a Hopf bifurcation occurs and a family of oscillations bifurcate from the equilibrium. It is also shown that the onset of the bifurcation can be postponed or advanced by selecting proper control parameters in the fractional-order PD controller. Finally, numerical simulations are given to validate the main results and the effectiveness of the control strategy.

     

Finite-time non-fragile boundary feedback control for a class of nonlinear parabolic systems

In this paper, the finite-time non-fragile boundary feedback control problem is investigated for a class of nonlinear parabolic systems, where both the multiplicative and additive controller gain variations are considered to describe the actuator parameter perturbation. Non-fragile boundary control strategies are designed with respect to two controller gain variations via collocated or non-collocated boundary measurement, respectively. In light of the finite-time stability and Lyapunov-based techniques, some sufficient conditions are presented in terms of linear matrix inequalities such that the resulting closed-loop system is well-posedness and practically finite-time stable. Finally, numerical examples are given to verify the effectiveness of the proposed design method.

     

Neural network based robust hybrid control for robotic system: an H �� approach

A novel robust hybrid tracking control for robotic system is proposed. This hybrid control scheme combines computed torque control (CTC) with neural network, variable structure control (VSC) and nonlinear H _?? control methods. It is assumed that the nominal system of robotic system is completely known, which is controlled by using CTC method. Neural network is designed to approximate parameter uncertainties, VSC is used to eliminate the effect of approximation error, and H _?? control is employed to achieve a desired robust tracking performance. Based on Lyapunov stability theorem, it can be guaranteed that all signals in closed loop are bounded and a specified H _?? tracking performance is achieved by employing the proposed robust hybrid control. The validity of the control scheme is shown by computer simulation of a two-link robotic manipulator.     

Dynamical stability analysis of a hose to the sky

The Stratospheric Shield was proposed as a geoengineering concept to control the Earth's climate and reverse global warming. This approach seeks to release sulphur dioxide (SO₂) aerosols in the stratosphere to decrease the amount of sunlight that reaches the surface of the Earth. It was proposed that this can be done by pumping liquefied SO₂ from the ground to the stratosphere in a 30 km long hose supported by aerostats.In this paper we evaluate the dynamic stability of a hose to the sky considering distributed supportive aerostats and an atomiser nozzle that forces a radial discharge of the fluid at the free end of the pipe. We modelled the pipe as a taut string conveying fluid using the finite element method.With a nozzle that discharges the flow straight through, we found that the pipe loses stability by buckling when the tension becomes null at least at one location along its length. This instability can be avoided by having a sufficient minimum tension T₀ throughout the whole length of the pipe. The distribution of aerostats does not influence this instability but it modifies the mode shapes and affects the complex frequencies. The atomiser discharging the flow radially at the tip of the pipe has for effect to remove the possibility of an instability; its use is thus recommended. Moreover, we showed that the Coriolis damping can be significant and that by appropriately selecting the number of aerostats as well as the dimensionless flow velocity, stability can be increased. With this in mind, a functional hose to the sky could be designed to maximise Coriolis damping and thus passively damp the motion of the pipe due to forcing from the wind.     

Robust finite-time tracking for a square fully actuated class of nonlinear systems

In this paper, the robust finite-time tracking problem is addressed for a square fully actuated class of nonlinear systems subjected to disturbances and uncertainties. Firstly, two applicable lemmas are derived and novel nonlinear sliding surfaces (manifolds) are defined by applying these lemmas. Secondly, by developing the nonsingular terminal sliding mode control, two different types of robust nonlinear control inputs are designed to meet and accomplish the aforementioned finite-time tracking objective. The global finite-time stability of the closed-loop nonlinear system is evaluated analytically and mathematically. The proposed control inputs are utilized to tackle and solve two interesting issues containing (a): the finite-time tracking problem of the unified chaotic system and (b): the finite-time synchronization of two non-identical hyperchaotic systems. Finally, based on MATLAB software, two numerical simulations are carried out to illustrate and demonstrate the effectiveness and performance of the proposed robust finite-time nonlinear control schemes.

     

柔性板的时滞H∞控制的理论与实验研究

以柔性板为对象, 开展时滞H∞控制的理论与实验研究. 首先给出柔性板的时滞动力学方程; 然后利用Lyapunov-Krasovskii泛函和自由权矩阵法, 推导了闭环时滞系统渐近稳定的矩阵不等式;进而根据该矩阵不等式采用参数调节法及遗传算法, 研究了如下两类控制设计问题: 已知控制律求解最大稳定时滞量, 已知最大稳定时滞量求解H∞控制律; 最后对理论研究成果进行了数值仿真和实验验证. 结果显示, 获得的H∞控制律能够有效地抑制板的弹性振动, 所确定出的保证系统稳定性的时滞区间更接近实际情况.      

Stochastic Stabilization of Quasi-Partially Integrable Hamiltonian Systems by Using Lyapunov Exponent

A procedure for designing a feedback control to asymptoticallystabilize, with probability one, a quasi-partially integrableHamiltonian system is proposed. First, the averaged stochasticdifferential equations for controlled r first integrals are derived fromthe equations of motion of a given system by using the stochasticaveraging method for quasi-partially integrable Hamiltonian systems.Second, a dynamical programming equation for the ergodic control problemof the averaged system with undetermined cost function is establishedbased on the dynamical programming principle. The optimal control law isderived from minimizing the dynamical programming equation with respectto control. Third, the asymptotic stability with probability one of theoptimally controlled system is analyzed by evaluating the maximalLyapunov exponent of the completely averaged Itô equations for the rfirst integrals. Finally, the cost function and optimal control forces aredetermined by the requirements of stabilizing the system. An example isworked out in detail to illustrate the application of the proposedprocedure and the effect of optimal control on the stability of thesystem.     

The stability of a circumferential crack in a pipe II. A simple procedure for determining the effective pipe length

A simple procedure is currently used to determine the effective pipe length associated with the instability of circumferential crack growth in a piping system. This procedure involves a separation of the complete piping system into two elastic parts at the cracked cross-section, the application of equal and opposite moments M to the cut faces, and the equation of the effective pipe length with $\text{El∥φ∥}\text{M}$ where φ is the rotational discontinuity generated at this section, E is Young's modulus and I is the second moment of area of the pipe at the cracked section. It is presumed that the pipe-ends remain fixed, i.e. they are built-in, throughout this operation. This paper shows that this procedure refers to the stability of a crack in a piping system which is subject to either a fixed displacement or a fixed rotation at a built-in end. The viability of the simple procedure is therefore underscored by the present paper's analysis.     

Neural-network-based adaptive robust precision motion control of linear motors with asymptotic tracking performance

High precision motion control of permanent magnet linear motors (PMLMs) is limited by undesired nonlinear dynamics, parameter variations, and unstructured uncertainties. To tackle these problems, this paper presents a neural-network-based adaptive robust precision motion control scheme for PMLMs. The presented controller contains a robust feedback controller and an adaptive compensator. The robust controller is designed based on the robust integral of the sign of the error method, and the adaptive compensator consists of a neural network component and a parametric component. Moreover, a composite learning law is designed for the parameter adaption in the compensator to further enhance the control performance. Rigorous stability analysis is provided by using the Lyapunov theory, and asymptotic tracking is theoretically achieved. The effectiveness of the proposed method is verified by comparative simulations and experiments on a PMLM-driven motion stage.

     

A particle swarm optimization approach for fuzzy sliding mode control for tracking the robot manipulator

In this paper, an optimal fuzzy sliding mode controller is used for tracking the position of robot manipulator, is presented. In the proposed control, initially by using inverse dynamic method, the known sections of a robot manipulator’s dynamic are eliminated. This elimination is done due to reduction over structured and unstructured uncertainties boundaries. In order to overcome against existing uncertainties for the tracking position of a robot manipulator, a classic sliding mode control is designed. The mathematical proof shows the closed-loop system in the presence of this controller has the global asymptotic stability. Then, by applying the rules that are obtained from the design of classic sliding mode control and TS fuzzy model, a fuzzy sliding mode control is designed that is free of undesirable phenomena of chattering. Eventually, by applying the PSO optimization algorithm, the existing membership functions are adjusted in the way that the error tracking robot manipulator position is converged toward zero. In order to illustrate the performance of the proposed controller, a two degree-of-freedom robot manipulator is used as the case study. The simulation results confirm desirable performance of optimal fuzzy sliding mode control.     

Stability and sensitivity analyses and multi-objective optimization control of the hydro-turbine generator unit

Oscillatory base manipulator (OBM) is a kind of mechanical system suffering from unexpected base oscillations. The oscillations affect tremendously system stability. Various control methods have been explored, but most of them require measurement or prediction of the oscillations. This study is concerned with a novel OBM—the autoloader, which is used in modern, autonomous main battle tanks. The base oscillation of the autoloader is hard to be obtained in practice. Furthermore, control synthesis for autoloaders is complicated with intrinsic payload uncertainty and actuator saturation. To address these issues, a novel robust control scheme is proposed in this work relying on the implicit Lyapunov method. Moreover, a novel two-degree-of-freedom manipulator operating on a vibrating base is constructed to realize the proposed control. To the best of the authors’ knowledge, this is the first study considering both control and hardware implementation for the OBM-like autoloaders. Simulation and experiment results demonstrate that, although without prior information of the base oscillation, the proposed controller exhibits good robustness against the base oscillation and payload uncertainty.

     

Optimal control of a rotational motion of a gyrostat on circular orbit

A control scheme is proposed to guarantee an optimal stabilization of a given rotational motion of a symmetric gyrostat on circular orbit. The gyrostat controlled by the control action generated by rotating internal rotors. In such study the asymptotic stability of this motion is proved using Barbachen and Krasovskii theorem's and the optimal control law is deduced from the conditions that ensure the optimal asymptotic stability of the desired motion. As a particular case, the equilibrium position of the gyrostat, which occurs when the principal axes of inertia coincide with the orbital axes, is proved to be asymptotically stable. The present method is shown to more general than previous ones.