Synthesis, NMR, X-ray structural analyses and complexation studies of new Ag selective calix[4]arene based dipodal hosts—a co-complexation of neutral and charged species

New podands based on the p-tert-butylcalix[4]arene unit with substitution at the lower rim incorporating imine units, have been synthesized in high yield by simple condensation method. These podands have been shown to extract and transport Ag⁺ selectively over alkali, alkaline earth metal cations, Zn²⁺, Pb²⁺ and Hg²⁺ ions, from neutral aqueous phase to organic phase. In all the ligands the calix unit has been found to be present in a cone conformation except for the one having pyridine as end group, at the ortho position. It has been isolated in two conformations; cone and 1,2-alternate. To the best of our knowledge, this may be the first 1,3-lower rim substituted calix[4]arene to exist in a 1,2-alternate conformation and is among a few known compounds with this conformation in the general class of calix[4]arenes. A complex of this ligand, which happens to be the highest extractant of Ag⁺ has been isolated and characterized using mass, ¹H and ¹³C NMR spectroscopy's and elemental analysis. The spectroscopic evidence and molecular modelling studies performed on the complex suggest a participation of the imine and pyridine nitrogens and two of the ether oxygens in coordination to the metal ion. The X-ray crystal structures of three of the ligands establish the formation of inclusion complexes with polar acetonitrile solvent molecules. The ¹H and ¹³C NMR spectra of all the compounds, taken in CDCl₃, show the presence of acetonitrile molecules in the cavity of the calix[4]arene, indicating inclusion of the neutral guest molecules in the solution phase as well. For one of the podands X-ray crystal structure has shown a formation of clatharate complex of chloroform with the ligand which has rarely been found in the case of calix[4]arenes.     

Improvement of selective d-cation binding by tetrathiacalix[4]arene hydrazides: synthesis and extraction properties

New de-tert-butyltetrathiacalix[4]arenes with acetylhydrazide substituents in cone and 1,3-alternate conformations have been synthesised with good yield by the hydrazinolysis of calix[4]arene ester derivatives. The recognition ability of synthesised macrocycles towards transition and alkali metals has been investigated by the picrate extraction method. The stoichiometry of complexes and the extraction constants have been determined. It has been found that tetrahydrazides do not extract alkali metal ions, but show an excellent affinity towards transition and heavy metal cations. The 1,3-alternate conformer of de-tert-butyltetrathiacalix[4]arene has revealed a remarkable selectivity for Ni²⁺ and Ag⁺ in the row of d-elements and for Cd²⁺ ion among the toxic heavy metals. The experimental data show that the removal of tert-butyl groups from tetrathiacalix[4]arene framework leads to the drastic improvement of extraction efficiency and selectivity of new tetrahydrazides.     

Synthesis and cationic selectivity studies of novel calix[4]arene derivatives containing heteroatom at the lower rim

A series of calixarene derivatives 2―5 containing heteroatom at the lower rim have been synthesized. 1H NMR studies and crystallographic structures demonstrated that the calix[4]arene derivatives adopted cone conformations. Their cationic binding abilities and selectivities towards heavy and tran- sition metal ions have been evaluated by solvent extraction of aqueous metal picrates. The obtained results indicated that the introduction of nitrogen, sulfur, and/or phosphor atoms to the calix[4]arene framework could effectively enhance their binding ability and selectivity for heavy and transition metal ions, such as Pb2 or Ag .     

Molecular Design of Calixarene 5. Syntheses and Cation Selectivities of Novel Schiff's Base p‐tert‐Butylcalix[4]arenes

Five novel Schiff's bases p‐tert‐butylcalix[4]arenes have been synthesized in high yields by the reaction of 1,3‐distally disubstituted p‐tert‐butylcalix[4]arene amine (1) with the corresponding aromatic aldehydes, and their cation binding abilities and selectivities with alkali and heavy metal ions have been evaluated by solvent extraction of aqueous metal picrates to show the highest Ag⁺ extractability for Schiff's base p‐tert‐butylcalix[4]arene (6) and the best Na⁺/Li⁺ and Ag⁺/Ti⁺ selectivities for Schiff's base p‐tert‐butylcalix[4]arene (4 and 2) over any other calix[4]arene derivatives, respectively.     

A tetraester derivative of fluorescent calix[4]arene bearing a proton-ionizable moiety for highly sensitive extraction-fluorometric determination of sodium ion

In this study, we report the highly sensitive extraction-fluorometric detection system of Na⁺ using flow injection analysis with a tetraester derivative of fluorescent calix[4]arene. In liquid-liquid extraction experiments, the fluorescent intensity of calix[4]arene derivative 1 bearing a p-nitrophenol moiety was highly dependent on pH and the Na⁺ concentration in the aqueous phase. On the other hand, such phenomenon was not observed in the case of calix[4]arene derivative 2, which is almost the same structure as 1 except for a p-nitrophenol moiety. These results show that the proton dissociation of the p-nitrophenol moiety decisively affects the fluorescence intensity of 1. Owing to these fluorescence responsiveness, a calibration graph of the Na⁺ concentration could be successfully prepared using flow injection analysis with good linearity at the tens of nanomolar level. The tetraester scaffold of calix[4]arene was essential to the detection of Na⁺ in such a very low concentration range.     

Hydrogen-Bonded Dimeric Capsules with Appended Spiropyran Units: Towards Controlled Cargo Release

We report the synthesis of unprecedented tetra-urea derivatives of calix[4]arene and calix[4]pyrrole containing four spiropyran (SP) units at their upper rim. We investigate the photo- and acid-induced isomerization of the monomeric and homo-dimeric tetra-ureas derivatives using UV-Vis and ¹H NMR spectroscopies. At micromolar concentration, irradiation of the samples with 365 nm light induces changes in their absorption spectra that are consistent with SP→merocyanine (MC) isomerization. However, analogous experiments at millimolar concentration do not produce noticeable changes in the ¹H NMR spectra. The addition of triflic acid to micromolar and millimolar solutions of the tetra-ureas produces the quantitative isomerization of the SP units to the protonated merocyanine form (E-MCH⁺) and the simultaneous disassembly of the capsular dimers to form ill-defined aggregates. The neutralization of the acid solutions resets the SP form. Under these acid/base treatment conditions, the controlled release of the included guest and the reassembly of the all-SP tetra-urea dimers occurs at different extents depending on its calix[4]arene or calix[4]pyrrole scaffold.     

Theoretical study on conformational features and cation-binding properties of a diquinone calix[4]arene

Theoretical studies of a diquinone calix[4]arene and its interactions with the cations Li⁺, Na⁺, K⁺ and Ag⁺ have been performed. Conformational features and cation-binding properties were evaluated with the restricted hybrid Becke three-parameter exchange functional method using the 6-31G(d) basis set and its relativistic effective core potentials. To model the effect of medium, the polarisable continuum model was also used. Four typical conformations of the parent diquinone calix[4]arene were studied. The calculated results show that the most stable conformers are 1,3-alternate and partial cone in the gas phase and in CH₂Cl₂ solution, respectively. The optimised geometric structures were used to perform natural bond orbital analysis. The two main types of driving force metal–ligand and cation–π interactions are investigated. The calculated binding energy for cations (Li⁺, Na⁺, K⁺ and Ag⁺) is discussed. The calculated results indicate that cone complexes are the most stable.     

杯芳烃接枝超细SiO2的制备及其对Cu2+、Ag+萃取性能的研究

通过对杯[4]芳烃以及杯[6]芳烃上缘进行烯丙基化和硅氢加成2步衍生化反应得到硅氢化杯[4]芳烃以及硅氢化杯[6]芳烃,再将这2种硅氢化杯芳烃衍生物分别接枝到超细SiO₂上。在不同的pH值条件下,就2种杯芳烃接枝超细SiO₂衍生物对水合Cu²⁺及Ag⁺的萃取性能进行了研究。结果表明,与对叔丁基杯芳烃相比较,杯芳烃接枝超细SiO₂衍生物对Cu²⁺和Ag⁺的萃取率都有所提高,其中杯[4]芳烃接枝超细SiO₂对Ag⁺的最高萃取率达到98.78%,杯[6]芳烃接枝超细SiO₂对Cu²⁺的最高萃取率达到67.74%。     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Anion‐binding properties of two calix[4]arene derivatives containing two ferrocene imine or ferrocene amine units at the upper rim

Calix[4]arene derivatives containing ferrocene units at the upper rim have been synthesized and their anion‐binding and sensing investigated towards anions such as chloride, bromide and hydrogen sulfate by cyclic voltammetry. Electrochemical studies show that these redox‐active ligands electrochemically recognize chloride and bromide anions. These compounds have excellent selectivity for chloride and bromide ions, in the comparison with hydrogen sulfate anion. With ferrocenyl Schiff base calix[4]arene 1 an anodic shift as large as 302 mV is observed on addition of four equivalents of Cl⁻ anion. Also electrochemical and UV–vis spectroscopic titrations ferrocenyl calix[4]arene derivatives 1 with chloride and bromide ions and 2 (only with Cl⁻) indicate a 1:1 binding‐stiochiometry. Copyright © 2011 John Wiley & Sons, Ltd.     

单氧代-二硒烷基-1, w-二氧取代杯[4]衍生物的合成,结构及萃取性能研究

Novel macrocyclic monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a were synthesized by the reaction of calix[4]arene dibromides 1-5 with the disodium salt of bis（2-selenylethyl）ether in the yields between 28% and 64%. Their structures were characterized by proton and carbon NMR spectra. X-Ray structure analysis of la further confirmed the cone conformation of compounds 1a-5a. An interesting host-guest complex of la with dichloromethane via CH/π and C1/π interactions was elucidated. Extraction experiments showed that these novel monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a had strong extraction ability towards mercury ion. The interaction of Hg^2＋with the calix ligand has also been investigated by 1^H NMR titration.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Oligomeric calix[4]arene‐thiacrown ether for toxic heavy metals

A new oligomeric calix[4]arene‐thiacrown‐4 ( 5 ) was synthesized via a condensation reaction of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐bis‐(4‐aminobenzyloxy)‐calix[4]arene‐thiacrown‐4 ( 4 ) with adipoyl dichloride. In this oligomerization reaction only five/six calix[4]arene‐thiacrown‐4 units were linked in the oligomeric chain. The complexation studies of 5 were made with liquid–liquid‐ extraction and solid–liquid‐sorption procedures. For comparison, the extraction efficiencies of monomers 1 , 3 , and 4 to selected transition metals are reported. The selectivity of monomers 3 and 4 toward Cu²⁺, Hg²⁺, and Pb²⁺ was lost after oligomerization in the two‐phase extraction systems. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 186–193, 2004     

Selective Transport of Cesium and Strontium Ions Through Polymer Inclusion Membranes Containing Calixarenes as Carriers

Abstract

Cs⁺ and Sr²⁺ are selectively removed over Na⁺ from acidic aqueous solutions with high Na⁺ concentrations by using membranes designed to selectively transport one of the two cations. To this end, calix[4]arene derivatives were used as carriers in polymer inclusion membranes (PIMs). The synthesis and characterization of new calix[4]arene derivatives (a bisamide (2) and three bisesters (3, 5 and 6)) used for the separation of Sr²⁺ are described. Another bisester (4) was employed for the same separation. In addition, a calix[4]arene-crown-6 (7) was incorporated into the membrane for Cs⁺ extraction. The concentration of each membrane component (polymer, carrier and counter-ion) was optimized and the permeability coefficients (P, m sec^?1) of Cs⁺, Sr²⁺ and Na⁺ were determined. A synergistic effect between the calixarenes and dinonylnaphtalenesulfonic acid, used as counterion, (DNNS, 8) was observed. High selectivity of Cs⁺ over Na⁺ and of Sr²⁺ over Na⁺ were obtained with compounds 7 and 3, respectively. The best P for Sr²⁺ was obtained with compound 4. A long-term experiment was carried out to demonstrate the durability of PIMs. PIMs are compared to classical supported liquid membranes.     

Synthesis of （p-Formylphenyl）azo Calix[4]arenes

Five novel azo calix[4]arenes were reported. The p-aminobenzaldehyde was diazotized with sodium nitrite in aqueous hydrochloride solution. Mono-, bis-, tris- and tetrakis(p-formylphenyl)azo calix[4]arenes (including proximal and distal isomers) were obtained respectively by diazo-coupling in different molar ratio to calix[4]arene(1) under pH=7.5--8.5 at 0-5℃. All (p-formylphenyl)azo calix[4]arenes were characterized by ^1H NMR, ^13C NMR, IR, MS (ESIMS) spectroscopies and elemental analysis.     

一种基于硫杂杯[4]芳烃的高效银离子载体

合成了基于下缘含有酰肼基团的硫杂杯芳烃衍生物的银离子载体1,其核磁研究证实硫杂杯芳烃以1,3-交替构象存在,并且通过非竞争萃取实验和竞争萃取实验研究了它对碱金属和过渡金属离子（Li⁺, Na⁺, K⁺, Cs⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Ag⁺）的键合能力和选择性。实验结果表明：将酰肼基团引入1,3-交替构象的硫杂杯芳烃骨架的下缘可以提高其对Ag⁺的键合能力和选择性,同时,对Cu²⁺的萃取能力较弱,对碱金属离子和其它的重金属离子几乎没有萃取能力。进一步的核磁滴定和电喷雾质谱实验显示化合物1与银离子形成配合物的配合计量比为1：1,由此推断主要由“N-Ag⁺”配位键以及硫杂杯芳烃骨架的协同作用构成了化合物1与银离子的配合模式。     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.     

p-tert-Butyldihomooxacalix[4]arene/p-tert-Butylcalix[4]arene: Transition and Heavy Metal Cation Extraction and Transport Studies by Ketone and Ester Derivatives

The binding properties of two phenylketones (2a and 3a) and two ethylesters (2b and {3b) derived from p-tert-butyldihomooxacalix[4]arene or from p-tert-butylcalix[4]arene, in the cone conformation, towards transition (Ag⁺, Ni²⁺, Cu²⁺, Co²⁺, Zn²⁺, Fe²⁺ and Mn²⁺) and heavy (Cd²⁺, Hg²⁺ and Pb²⁺) metal cations have been determined by extraction studies with metal picrates and liquid membrane transport experiments with the same salts. The affinity of these ligands for Ag⁺ has also been investigated by ¹H NMR spectroscopy. Both ketones are better extractants than the esters, and show a strong preference for Ag⁺, while Cu²⁺ is the most extracted cation with the esters. ¹H NMR titrations with AgSO₃CF₃ indicate 1 : 1 complexes for all ligands, those with ketones are more stable, on the NMR time scale, than those with esters. Both esters are good carriers for Ag⁺, and 2b exhibits the highest transport rate (4.7 mol h^-1) found until now with dihomooxacalix[4]arene derivatives.     

Excellent Ag+ selective receptors: Syntheses and complexation properties of novel biscalix[4]arene with benzalazine groups

By reacting mono-substituted or 1,3-bi-substituted [2-(p-formylphenyloxy)ethyloxy]-p-tert-butylcalix[4]arene (3 or 4) with hydrazine hydrate in ‘1+2’ or ‘2+2’ condensation mode, novel benzalazine-bridging biscalix[4]arenes 5 and 7 were conveniently obtained in the yields of 76 and 81%, respectively. Condensation of compound 4 and salicylide hydrazone gave a novel calix[4]arene benzalazine derivative 6 in the yield of 85%. The structures and conformations of all new compounds were characterised by elemental analyses, ESI-MS, ¹H NMR and ¹H–¹H COSY techniques. Biscalix[4]arene 7 adopts a symmetrical cone conformation with tube cavity. The liquid–liquid extraction experiment showed that all new hosts possessed excellent complexation abilities towards soft metal cations. Compound 7 exhibited high complexation selectivity towards Ag⁺. The Ag⁺/Na⁺ and Ag⁺/Hg²⁺ extraction percentages of host 7 were as high as 73.1 and 54.9, respectively. The UV–vis spectra complexation experiments revealed that the complexation constant of receptor 7 with Ag⁺ was 1.9 × 10⁵ M^? 1 and the 1:1 stoichiometry of receptor 7–Ag⁺ complex was formed. The ¹H NMR spectra complexation experiments suggested that Ag⁺ was bound in a cavity composed of two benzalazine groups on bridging chains.     

新型多重氮杂杯[4]芳烃衍生物的合成

对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与水杨酰肼、烟酰肼、异烟酰肼反应, 合成了具有开链结构新型杯[4]多重氮杂衍生物2a～2c, 产率分别为88%, 85%和90%. 化合物1与乙二酰肼、丙二酰肼、己二酰肼反应, 得到具有桥联结构的新型杯[4]多重氮杂衍生物3a～3c, 产率分别为86%, 89%和90%. 新化合物的结构经元素分析、质谱、核磁共振谱等表征证实, 杯[4]芳烃单元均为1,3-取代且采取锥式构象.