Labelling and Fractionating of Black Mamba Venom using 131I and Gel-Filtration Technique

Separation of Black Mamba (Dendroaspis polylepis) venom into three fractions was achieved by the use of Sephadex G-100 filtration method. The first and highest peak of the three separated bands proved to be the lethally toxic. Labelling the venom with nascent¹³¹ I prior to fractionating facilitated the detection and the evaluation of three well resoluted fractions. Comparative separation of non-labelled venom was also carried out side by side with the labelled one to study the advantage of radioactivity on extinction measurements.     

Specific energy from Auger and conversion electrons of 131I, 188Re-anti-CD20 to a lymphocyte's nucleus

The typical radionuclides used to label anti-CD20 in the treatment of non-Hodgkin's lymphoma are ⁹⁰Y, ¹³¹I, and ¹⁸⁸Re, with the emission of beta particles, Auger electrons, and conversion electrons for the latter two. The aim of the present work was to calculate the contribution of high linear energy transfer radiation as Auger electrons (AE) and conversion electrons (CE) of ¹³¹I and ¹⁸⁸Re-anti-CD20 to mean specific energy into the cell nucleus by Monte Carlo simulation (MCS), so as to infer therapeutic effectiveness on a dosimetric basis. MCS was used to quantify the frequency–mean specific energy into the cell nucleus, where the cell was modeled by two concentric spheres, considering two cell models. The results showed that 10% and 33% of the mean-specific energies (z¯) per disintegration imparted to the cell nucleus for both geometries are due to AE and CE; on the other hand, if the hit of AE and CE occurs, the contribution to (z¯) is about 64% and 86% for ¹³¹I and ¹⁸⁸Re, respectively. According to the amount of specific energy from AE and CE into the cell nucleus by positive event, they can cause catastrophic effects in the nuclear DNA in the treatment of non-Hodgkin's lymphoma with ¹³¹I, ¹⁸⁸Re-anti-CD20.     

Theoretical investigations on the spin Hamiltonian parameters and local structures for the trigonal Ni2+ centers in CsMgX3 (X=Cl,Br, I)

The spin Hamiltonian parameters (zero-field splitting and the anisotropic g factors) and the local structures for the trigonal Ni²⁺ centers in CsMgX₃ (X=Cl, Br, I) are theoretically investigated from the perturbation formulas of these parameters for a 3d⁸ ion in trigonally distorted octahedra, by including the ligand s-orbital contributions. Based on the studies, the local impurity-ligand bond angles β related to the C ₃ axis in the Ni²⁺ centers are found to be about 2° larger than the corresponding angles, β_H, in the hosts, due to the size mismatching substitution of Mg²⁺ by Ni²⁺. The theoretical results based on the inclusion of the ligand s-orbital contributions show an improvement when compared with those in the absence of the above contributions, especially for the ligand I^?.     

Mechanoluminescence and thermoluminescence of BaFCl:Sm 2+ and BaFBr:Sm 2+ crystals

The alkaline-earth fluorohalide crystals MFX, where M=Ca, Sr, Ba, Pb and X=Cl, Br, I, form an important class of materials crystallizing in the PbFCl-type tetragonal structure which is also called the matlockite structure. These compounds have long been of interest because of the various defect species which can be detected by spin resonance and associated techniques. The crystals were prepared by slow cooling of the melt of a stoichiometric mixture of BaF ₂ and the corresponding chloride or bromide under 0.2 bar of ultrapure argon (5N5), often slightly fluorinated. We have studied the mechanoluminescence (ML) of BaFBr:Sm ²⁺ and BaFCl:Sm ²⁺ crystals. It is seen that after the impact of a moving piston, initially the ML intensity increases with time, attains a maximum value and then it decreases with time up to a particular minimum value, and then it increases again, attaining a peak value and finally disappears. The first peak lies in the deformation region and the second peak lies in the post-deformation region. The ML intensity of the BaFCl:Sm ²⁺ crystal is much higher than the ML intensity of the BaFBr:Sm ²⁺ crystal. For different impact velocities, the ML intensity increases with velocity; and the total ML intensity attains a saturation value for higher impact velocities. The total ML intensity increases with the increase in the applied load. It is suggested that the moving dislocation produced during deformation of crystals captures holes from hole-trapped centers (like H centers), and the subsequent radiative recombination of the dislocation holes with electron gives rise to ML. Thermoluminescence (TL) of BaFBr:Sm ²⁺ and BaFCl:Sm ²⁺ crystals was studied after exposure to ultraviolet rays with the help of a TLD reader. The peak of TL for the BaFBr:Sm ²⁺ crystal is found at ～247°C and for BaFCl:Sm ²⁺ crystals at 283°C. The TL intensity initially increases with increase in the UV radiation and then it attains saturation for higher values of UV exposure. The absorption spectrum was recorded with the help of a UV–visible spectrophotometer (Shimadzu). The band found at 275 nm was attributed to H centers.     

NQR, NMR and Crystal Structure Studies of [C(NH2)3]2HgX4 (X = Br, I)

The crystal structure of [C(NH₂)₃]₂HgBr₄ has been determined at room temperature: monoclinic, space group C2/c, with a = 10.035(2), b = 11.164(2), c = 13.358(3) Å, β = 111.67(3)°, and Z = 4. The crystal consists of planar [C(NH₂)₃]⁺ and distorted tetrahedral [HgBr₄]^2? ions. The Hg atom is located on a two-fold axis such that two sets of inequivalent Br atoms exist in an [HgBr₄]^2? ion. In accordance with the crystal structure, two ⁸¹Br NQR lines widely separated in frequency were observed between 77 and ca. 380 K. [C(NH₂)₃]₂HgI₄ yielded four ¹²⁷I NQR lines ascribable to m = ±1/2 ? ±3/2 transitions, indicating that its crystal structure is different from the bromide complex. The ¹H NMR T ₁ measurements showed a single minimum for the bromide but two minima for the iodide. The analyses based on the C₃ reorientations of the planar [C(NH₂)₃]⁺ ions gave the activation energies of 29.8 kJ mol^?1 for the bromide, and 30.2 and 40.0 kJ mol^?1 for the iodide.     

First direct measurement of the total cross-section of 12C(α,γ)16O

The total cross-section of ¹²C(α,γ)¹⁶O was measured for the first time by a direct and ungated detection of the ¹⁶O recoils. This measurement in inverse kinematics using the recoil mass separator ERNA in combination with a windowless He gas target allowed to collect data with high precision in the energy range E = 1.9 to 4.9 MeV. The data represent new information for the determination of the astrophysical S(E) factor.     

New expressions for g—factors of the mixed ground state of 3d^9 ions with a compressional tetragonal symmetry and its application to NaCl：Ni^＋（I）

We deduce new expressions for g-factors of the 3d⁹ ions with a compressional tetragonal symmetry, in which we consider not only the contribution from the spin-orbit coupling of the central transition metal ion but also that of the ligand orbits as well as the admixture of ²B_1g into ²A_1g (ground state). By using the new formulae, the electron paramagnetic resonance g-factors for NaCl:Ni⁺(I) are studied. Thus, the puzzle that the g_‖-shift is positive is reasonably explained.     

Theoretical calculation of of B-like ions： photoionization cross sections N^2＋, O^3＋ and F^4＋

There can be found some notable discrepancies with regard to the resonance structures when R-matrix calculations from the Opacity Project and other sources are compared with recent absolute experimental measurements of Bizau et al [Astron.Astrophts.439 387(2005)] for B-like ions N2+,O3+ and F4+.We performed close-coupling calculations based on the R-matrix formalism for the photoionizations of ions mentioned above both for the ground states and first excited states in the near threshold regions.The present results are compared with experimental ones given by Bizau et al and earlier theoretical ones.Excellent agreement is obtained between our theoretical results and the experimental photoionization cross sections.The present calculations show a significant improvement over the previous theoretical results.     

Tunneling conductance in quantum wire/insulator/dx2 -y2 + idxy mixed wave superconductor junctions

Using the extended Blonder-Tinkham-Klapwijk (BTK) theory, this paper calculates the tunnelling conductance in quantum wire/insulator/dx2-y2 + idxy mixed wave superconductor (q/I/dx2-y2 + idxy) junctions. That is different from the case in d- and p-wave superconductor junctions. When the angle α between a-axis of the dx2-y2 wave superconductor and the interface normal is π/4, there follows a rather distinctive tunnelling conductance. The zero-bias conductance peak (ZBCP) may or may not appear in the tunnelling conductance. Both the interface potential z and the quasi-particle lifetime factor Γ are smaller, there is no ZBCP. Otherwise, the ZBCP will appear. The position of bias conductance peak (BCP) depends strongly on the amplitude ratio of two components for dx2-y2 + idxy mixed wave. The low and narrow ZBCP may coexist with the BCP in the tunnelling conductance. Using those features in the tunnelling conductance of q/I/dx2-y2 + idxy junctions, it can distinguish dx2-y2 + idxy mixed wave superconductor from d- and p-wave one.     

Y2O3:Yb3+,Tm3+纳米材料的可见及紫外上转换发光

通过燃烧法制备了Yb³⁺-Tm³⁺共掺的Y₂O₃纳米粉体,并对样品在980 nm激光照射下的上转换发光特性进行了研究.实验发现,样品在可见光区域能够产生强烈的蓝色发光(476 nm和487 nm)和较弱的红色发光(约650 nm),而且同时观察到了两个紫外发光峰¹I₆→³H₆ (~297 nm)和^{1关键词： 2O₃:Yb3+')" href="#">Y₂O₃:Yb3+ 3+}')" href="#">Tm³⁺ 上转换光谱 敏化 紫外发光     

Studies on Trace Labelling of Bromsulphalein (BSP) with Radioiodine

Two methods have been studied for high specific activity trace iodination of Bromsulphalein (BSP) with radioiodine (¹³¹I). In the first method, BSP in aqueous solution is reacted with iodine and an oxidising agent – hydrogen peroxide or chloramine T. In the second method, iodination is carried out by electrolytically liberated iodine. The electrolytic method gives labelled BSP free from any labelled degradation products. The stability of ¹³¹I-labelled BSP in aqueous solution has been studied. The product has been found to remain more stable in aqueous solutions at a slightly acid pH (4…6.5) than in dilute alkaline solutions (pH 7…9.5).     

金属离子诱导下DNA折叠的不同机理

利用等温滴定量热仪、圆二色谱和荧光光谱,研究和分析了人工合成的DNA单链序列d(T₆C₆T₆C₆T₆C₆T₆)与Hg²⁺和Ag⁺相互作用的折叠过程. 在改变离子添加顺序的情况下,尽管热力学数据显示两种情况下都能通过两种不同反应路径得到一种相对稳定的发夹结构,但等温滴定量热仪数据却显示最终产物形成的机理截然不同.当先加入Hg²⁺时,发夹结构首先通过T-Hg-T碱基对形成然后C-Ag-C碱基对得到进一步稳定. 然而当先加入Ag⁺时,通过圆二色谱和荧光分析确认了一种不常见的金属碱基对T-Ag-C取代了经典的C-Ag-C碱基对.     

Solid-State Rb NMR Study in Powdered RbMnCl3

Structural phase transition at 290 K and the implication on the intermediate phase above 290 K in powdered RbMnCl₃ are observed by using a solid-state ⁸⁷Rb NMR spectroscopy. Quadrupole coupling constants (e²qQ/h), the asymmetry parameters (η), and the relative peak intensities for two physically nonequivalent Rb sites, Rb(I) and Rb(II), are determined from nonlinear least-squares fits to the ⁸⁷Rb NMR powder patterns in the temperature range from 260 to 330 K. Quadrupole coupling constants and the asymmetry parameters are examined for the detection of the phase transition resulting in a significant structural change in the Rb(II) site. In addition, changes in the relative peak intensity between the Rb(I) and Rb(II) sites seem to suggest the existence of an anomalous intermediate phase, which is complemented by the differential scanning calorimetry and X-ray diffraction studies.     

Synthesis and luminescence properties of Eu, Ce and Tb-activated Sr3La2(BO3)4 under UV excitation

The spectroscopic properties in UV-excitable range for the phosphors of Sr₃La₂(BO₃)₄:RE³⁺ (RE³⁺=Eu³⁺, Ce³⁺, Tb³⁺) were investigated. The phosphors were synthesized by conventional solid-state reactions. The photoluminescence (PL) spectra and commission international de I'Eclairage (CIE) coordinates of Sr₃La₂(BO₃)₄:RE³⁺ were investigated. The f-d transitions of Eu³⁺, Ce³⁺ and Tb³⁺ in the host lattices are assumed and corroborated. The PL and PL excitation (PLE) spectra indicate that the main emission wavelength of Sr₃La₂(BO₃)₄:Eu³⁺ is 611 nm, and Sr₃La₂(BO₃)₄:Ce³⁺ shows dominating emission peak at 425 nm, while Sr₃La₂(BO₃)₄:Tb³⁺ displays green emission at 487, 542, 582 and 620 nm. These phosphors were prepared by simple solid-state reaction at 1000 °C. There are lower reactive temperature and more convenient than commercial phosphors. The Sr₃La₂(BO₃)₄:Tb³⁺ applied to cold cathode fluorescent lamp was found to emit green light and have a major peak wavelength at around 542 nm. These phosphors may provide a new kind of luminescent materials under ultraviolet excitation.     

Eu2+,Mn2+在BaZnP2O7中的发光及Eu2+→Mn2+能量传递

采用高温固相法合成了BaZnP₂O₇:Eu²⁺,Mn²⁺荧光粉,并对其发光性质及Eu²⁺对Mn²⁺的能量传递机理进行了研究.Eu²⁺和Mn²⁺在380 nm和670nm的发射峰分别由Eu²⁺的5d—4f跃迁和Mn²⁺的⁴T₁(^{4关键词： 磷酸盐 2+}')" href="#">Eu²⁺ 2+')" href="#">Mn²⁺ 能量传递     

Concentration effect of Tm on cathodoluminescence properties of SiO2:Tm and SiO2:Ho,Tm systems

Cathodoluminescence (CL) properties of SiO₂ powders activated with thulium (Tm³⁺) and holmium (Ho³⁺) ions prepared by a sol–gel process were investigated. Different molar concentrations of Tm³⁺ co-doped with Ho³⁺ were studied. The 460 nm peak was monitored and the influence of the beam energy and concentration of Tm³⁺ ions on the emission properties of this peak was also monitored. The peculiar behavior whereby the 460 nm emission peak decreases and the increase in the 705 and 865 nm peaks with the increase in the concentration of Tm³⁺ ions is reported. The relationship between the accelerating beam voltage and the CL intensity of the blue emission peak (460 nm peak) is established. Morphology, particle size and optical properties were characterized with Scanning electron microscopy (SEM), UV/VIS Lambda 750 S spectrometer and Auger electron spectroscopy (AES) equipped with Ocean Optics S2000, respectively.     

The lowest electronic states of Ne2 +, Ar2 + and Kr2 +: comparison of theory and experiment

Non-relativistic configuration interaction (CI) ab initio calculations using large basis sets have been carried out to determine the potential curves of the first electronic states of Ne₂ ⁺, Ar₂ ⁺ and Kr₂ ⁺. The spin—orbit interaction was treated assuming that the spin—orbit coupling constant is independent of the internuclear separation (R). For Ar₂ ⁺, calculated dissociation energies and equilibrium separations are in good agreement with experimental results. The calculations for Ne₂ ⁺ suggest that the lowest vibrational level of the I(1/2u) ground state observed by threshold photoelectron spectroscopy by Hall et al. [1995, J. Phys. B: At. molec. opt. Phys., 28, 2435] and assigned to either ν = 0 or ν = 2 actually corresponds to ν = 4. The calculations also predict the I(1/2g) state of Ne₂ ⁺ and Ar₂ ⁺ to possess a double-well potential and that of Kr₂ ⁺ to be repulsive at short range and to only possess a single shallow well at large internuclear separation. The ab initio calculations provide an explanation for the observation made by Yoshii et al. [2002, J. chem. Phys., 117, 1517] that Kr₂ ⁺ and Xe₂ ⁺ dissociate after photoemission from the II(1/2u) state to the I(1/2g) state whereas Ar₂ ⁺ does not.     

Cr3+,Yb3+,Er3+共掺磷酸盐铒玻璃转镜调Q激光性质研究

研究了Cr³⁺,Yb³⁺,Er³⁺共掺磷酸盐铒玻 璃转镜调Q激光性质.三种Er₂O₃掺杂浓度的激光实验结果表明，在Er₂O₃名义掺杂浓 度为0.5wt％时，玻璃的综合激 光性质最好，重复频率为0.1Hz时，它的激光阈值功率为14.5mJ，最大输出能量为9.6mJ ，斜率效率为0.55％.在同种实验条件下，比较了Cr14和Kigre公司生产的QE-7S激光性质参数，实验表明，前者激光阈值功率稍低，而后者的斜率效率和最大输出功率略高. 关键词： 3+-Yb³⁺-Er³⁺共掺')" href="#">Cr³⁺-Yb³⁺-Er³⁺共掺 磷酸 盐玻璃 光谱性质 激光性质     

Tm3+/Ho3+共掺镓铋酸盐玻璃1.47μm发光特性和能量传递的研究

报道了Tm³⁺/Ho³⁺共掺的镓铋酸盐玻璃14Ga₂O₃-25Bi₂O₃-20GeO₂-31PbO-10PbF₂玻璃1.47μm(S波段)发光和能量传递特征，应用Judd-Ofelt理论计算了玻璃的强度参数Ω_t(t=2，4，6)，自发辐射概率A、荧光分支比β，荧光辐射寿命τ等各项光谱参数以及有效荧光线宽Δλ_eff和峰值发射截面σ^peak_e.通过测量荧光光谱和荧光寿命研究了Ho³⁺离子掺杂浓度对Tm³⁺离子1.47μm波段发光性能的影响，分析了Tm³⁺和Ho³⁺之间的能量传递过程.结果表明一定浓度内Ho³⁺的共掺迅速降低了Tm³⁺：³F₄能级的粒子数，而对³H₄能级粒子数影响不大，从而降低了³F₄和³H₄能级间布居数反转的难度，极大地提高了1.47μm发光效率.研究表明镓铋酸盐玻璃是适用于S波段光纤放大器的一种潜在基质材料，而掺杂一定浓度的Ho³⁺离子有利于提高Tm³⁺离子在1.47μm波段的发光效率. 关键词： 重金属氧化物玻璃 光谱性质 3+/Ho³⁺离子')" href="#">Tm³⁺/Ho³⁺离子 能量传递     

12C induced transfer reactions on 56Fe

Transfer reactions ⁵⁶Fe(¹²C, xN) have been investigated. Angular distributions of particles following elastic scattering, one neutron and one proton transfer reaction channels leading to low lying states in respective residual nuclei have been measured. These are analysed using the coupled reaction channel (CRC) formalism. Starting with a double folded real potential, the elastic scattering angular distribution is calculated using the computer code FRESCO. Inclusion of couplings to first excited states in both the target and the projectile already tends to describe the experimental elastic scattering distribution. Additional coupling of one neutron transfer reaction to first five excited states in ⁵⁵Fe and one proton transfer reaction to first three low lying states in ⁵⁷Co improves fit to the elastic scattering angular distribution. Further refinement in fit is brought about by addition of a weak imaginary potential to the complex potential calculated by ERESCO to simulate the absorption effects due to those channels whose coupling is not included explicitly. Such a potential describes the experimental angular distributions for elastic, one neutron and one proton transfer channels correctly in shape and magnitude without any arbitrary normalisation.