顶空固相微萃取-气相色谱-质谱联用分析麦冬中有机挥发物

采用顶空固相微萃取-气相色谱-质谱联用(HS-SPME-GC-MS)分析麦冬中挥发性成分,对萃取温度、时间、脱附时间及样品用量等条件进行了优化,方法所得结果与同时蒸馏萃取-气相色谱-质谱联用(SDE-GC-MS)方法比较,相对含量较高的成分基本一致.固相微萃取方法可应用于麦冬中有机挥发性成分的快速分析.     

顶空固相微萃取-气相色谱法测定废水中挥发性脂肪酸

提出了顶空固相微萃取-气相色谱法测定废水中挥发性脂肪酸(乙酸、丙酸、丁酸、戊酸、异戊酸和己酸)的含量。为使固相微萃取达到更高的效率,选择极性85μm PA作为微萃取头的涂层,微萃取系在pH 1.5的试液中进行,萃取温度及时间为25℃和20 min,在20 mL试样溶液中加入氯化钠3.5 g作为盐析剂。用Stabilwax-DA毛细管色谱柱分离,火焰离子检测器检测。6种脂肪酸在一定的质量浓度范围内与其峰面积呈线性关系,相对标准偏差(n=10)均小于10.0%。     

固相微萃取/气相色谱-质谱联用法测定橡胶密封材料中N-亚硝胺

建立了固相微萃取/气相色谱-质谱联用法(SPME/GC-MS)测定橡胶密封材料中N-亚硝基-N-甲基苯胺(NMPh A)、N-亚硝基-N-乙基苯胺(NEPh A)和N-亚硝基二苯基胺(NDPhe A)3种N-亚硝胺化合物含量的方法。样品参考国标GB/T 24153-2009进行预处理后,采用固相微萃取进行提取,对影响固相微萃取效率的纤维涂覆种类、萃取时间、搅拌速度和萃取温度等条件进行优化。在优化条件下,方法的线性范围为5~500μg/L,相关系数(r)均大于0.99,检出限为0.5μg/kg,回收率为77%~92%,相对标准偏差(RSD,n=6)为3.8%~7.7%。     

气相色谱-质谱法测定环境空气中7种挥发性脂肪酸

挥发性脂肪酸(VFAs)是典型的恶臭物质,其在环境空气中处于痕量水平。该文建立了同时测定环境空气中乙酸、丙酸、异丁酸、正丁酸、丙烯酸、异戊酸和正戊酸7种挥发性脂肪酸(VFAs)的气相色谱-质谱(GC-MS)分析方法。环境空气样品采用浸渍硅胶管采集,以超纯水提取,经甲基叔丁基醚萃取并浓缩定容后,GC-MS测定,内标法定量。结果显示,7种VFAs在各自的浓度范围内线性关系良好(r~2≥0.995),检出限为0.11～4.78μg/m~3,加标回收率为62.3%～110%,相对标准偏差为2.2%～12%。该方法简便、准确、灵敏,适用于环境空气中VFAs的测定。     

顶空固相微萃取-气相色谱-质谱法同时测定饮用水源水中24种VOCs

建立了同时测定饮用水源水中24种挥发性有机物(VOCs)的顶空固相微萃取-气相色谱-质谱法.用75 μm CarboxenTM-Polydimethylsiloxane(CAR-PDMS)固相微萃取柱顶空萃取水样中的VOCs,VOCs用气相色谱-质谱联用仪检测,采用内标法定量.对萃取柱涂层、样品盐度、萃取温度和萃取时间等样品前处理条件进行了优化,VOCs的检出限在0.03～0.31 μg/L之间,线性相关系数r＞0.996(二氯甲烷和三氯甲烷除外).对饮用水源水实际水样0.50μg/L和1.00 μg/L两个加标浓度水平的回收率进行了测定,三氯甲烷回收率均值分别为104％和142％,其余VOCs回收率分别为90.0％～120％和88.0％～110％,除二氯甲烷和三氯甲烷外,其余VOCs测定结果的相对标准偏差均小于15.0％(n=6).该方法适用于饮用水源水中挥发性有机物的监测分析.     

固相微萃取-气相色谱质谱法测定烟草中的酚类化合物

采用固相微萃取-气相色谱质谱法测定烟草中的酚类物质,对影响固相微萃取的参数进行了优化。结果表明:各酚类化合物的回收率为80.0%~115.0%,检测限为0.037~0.066μg/g,测定结果的相对标准偏差不大于8.8%(n=5)。该方法操作简便、快速,灵敏度高,适合烟草中挥发性和半挥发性酚类化合物的分析检测。     

动态微波辅助顶空固相微萃取-气相色谱-质谱法测定芹菜叶中的化学成分

采用动态微波辅助顶空固相微萃取结合气相色谱-质谱法测定芹菜叶中的挥发性和半挥发性化学成分。对水蒸气蒸馏、顶空固相微萃取、微波辅助顶空固相微萃取、动态微波辅助顶空固相微萃取等4种不同的前处理方法进行了比较,通过气相色谱-质谱分析,分别鉴定出20,17,36,41种化学成分,主要化合物为α-月桂烯、柠檬烯、β-顺式罗勒烯、β-芹子烯和(Z)-3-己烯-1-醇等。结果表明:动态微波辅助顶空固相微萃取是一种简单、快速、易操作,无需净化步骤,消耗样品量少,对于沸点较高的半挥发性物质的萃取效果优于微波辅助顶空固相微萃取的方法,可用于分析各类植物中的挥发性和半挥发性化学成分。     

顶空衍生固相微萃取-气相色谱质谱法测定聚碳酸酯树脂中的环境雌激素

建立了固相微萃取-气相色谱质谱联用测定聚碳酸酯树脂中环境雌激素4-枯基苯酚和双酚A的分析方法。优化了固相微萃取纤维、萃取温度和时间、解吸时间、搅拌速度、pH等萃取条件及衍生化温度和时间、衍生化方式等衍生化条件，并对样品浸泡时间、浸泡温度等进行了研究。方法的线性范围为0．05μg/L～1mg／L，4-枯基苯酚和双酚A的检出限分别为50ng／L和0．5ng／L，相对标准偏差（RSD，n=5）分别为5．2％和1．6％，平均回收率（n=3）在90．50％～107．3％之间，该方法简单、快速、灵敏。     

固相微萃取-气相色谱-质谱法测定饮用水源中53种挥发性有机污染物

应用固相微萃取-气相色谱-质谱法测定饮用水源中53种挥发性有机污染物的含量。优化的试验条件如下:1萃取纤维为DVB/CAR/PDMS;2萃取温度为25℃;3顶空体积为9mL;4萃取时间为10min;5解吸温度为200℃;6解吸时间为3min。在气相色谱分离中用VF-624MS柱为固定相,在质谱分析中采用全扫描模式。53种挥发性有机污染物在一定的质量浓度范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.001~0.130μg·L-1之间。方法用于实际水样的分析,加标回收率在75.9%~107%之间,测定值的相对标准偏差(n=5)在0.5%~18%之间。     

固相微萃取-气相色谱法测定空气样品中的苯系物

建立了固相微萃取-气相色谱/氢火焰离子化检测法测定空气样品中苯系物的分析方法。对固相微萃取纤维种类、解吸温度和时间、萃取时间等实验条件进行了优化,并对采样袋的气密性和稳定性进行了考察。结果表明:6种挥发性有机化合物的5个色谱峰(间、对二甲苯无法分开)的峰面积与其浓度在所测范围内具有较好的线性关系,相对标准偏差小于4.6%,检出限低至0.03ng/mL。该方法简便、快捷、重现性好,检出限低,采样装置的气密性好,适合于实际环境气体样品的异位分析。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.