纳米Pd的形貌和尺寸可控制备及其1,4-丁炔二醇加氢性能

采用化学还原法合成Pd纳米立方体,并将其作为晶种,进一步合成大尺寸的纳米Pd立方体以及具有不同{100}和{111}晶面比例的纳米Pd多面体.将形貌和尺寸可控的纳米Pd溶胶应用于1,4-丁炔二醇催化加氢的反应中,反应结果表明,纳米Pd的催化性能取决于其尺寸和形貌.{111}晶面的催化活性高于{100}晶面,PVP稳定的Pd胶体对1,4-丁烯二醇均具有较高选择性,具有适当{100}和{111}晶面比例的纳米Pd多面体对1,4-丁烯二醇的选择性可达96%.     

Selective Semihydrogenation of Alkynes on Shape‐Controlled Palladium Nanocrystals

A systematic study on the selective semihydrogenation of alkynes to alkenes on shape‐controlled palladium (Pd) nanocrystals was performed. Pd nanocrystals with a cubic shape and thus exposed {100} facets were synthesized in an aqueous solution through the reduction of Na₂PdCl₄ with L ‐ascorbic acid in the presence of bromide ions. The Pd nanocubes were tested as catalysts for the semihydrogenation of various alkynes such as 5‐decyne, 2‐butyne‐1,4‐diol, and phenylacetylene. For all substrates, the Pd nanocubes exhibited higher alkene selectivity (>90 %) than a commercial Pd/C catalyst (75–90 %), which was attributed to a large adsorption energy of the carbon–carbon triple bond on the {100} facets of the Pd nanocubes. Our approach based on the shape control of Pd nanocrystals offers a simple and effective route to the development of a highly selective catalyst for alkyne semihydrogenation.     

Facet‐Dependent Catalytic Activity of Cu2O Nanocrystals in the One‐Pot Synthesis of 1,2,3‐Triazoles by Multicomponent Click Reactions

We report the highly facet‐dependent catalytic activity of Cu₂O nanocubes, octahedra, and rhombic dodecahedra for the multicomponent direct synthesis of 1,2,3‐triazoles from the reaction of alkynes, organic halides, and NaN₃. The catalytic activities of clean surfactant‐removed Cu₂O nanocrystals with the same total surface area were compared. Rhombic dodecahedral Cu₂O nanocrystals bounded by {110} facets were much more catalytically active than Cu₂O octahedra exposing {111} facets, whereas Cu₂O nanocubes displayed the slowest catalytic activity. The superior catalytic activity of Cu₂O rhombic dodecahedra is attributed to the fully exposed surface Cu atoms on the {110} facet. A large series of 1,4‐disubstituted 1,2,3‐triazoles have been synthesized in excellent yields with high regioselectivity under green conditions by using these rhombic dodecahedral Cu₂O catalysts, including the synthesis of rufinamide, an antiepileptic drug, demonstrating the potential of these nanocrystals as promising heterogeneous catalysts for other important coupling reactions.     

Design of Pd{111}-TiO<Subscript>2</Subscript> interface for enhanced catalytic efficiency towards formic acid decomposition

Supports are commonly implemented in the industrial application of heterogeneous catalysts to improve the stability and recyclability of catalysts. The supported catalysts often show the enhanced activity and selectivity in various catalytic reactions. However, the specific contributions of electronic and steric effects to a catalytic system often remain elusive due to the lack of well-defined model systems. In this work, two types of uniform Pd nanocrystals covered by {111} facets in tetrahedral and octahedral shapes, respectively, are synthesized with identical chemical environment and loaded on TiO₂ supports to form hybrid structures (Pd{111}-TiO₂) towards the application of formic acid decomposition. Our observation suggests that the polarization effect at the interface of Pd-TiO₂ enhances its activity in formic acid decomposition. Moreover, the Pd tetrahedrons-TiO₂ hybrid structure whose Pd{111}-TiO₂ interface possesses a larger angle shows higher catalytic activity, owing to the reduced steric effect as compared to Pd octahedrons-TiO₂. This study reveals the nature of interface effects in formic acid decomposition, and provides a guidance for the related catalyst design.     

Quantitative analysis of the role played by poly(vinylpyrrolidone) in seed-mediated growth of Ag nanocrystals

This article presents a quantitative analysis of the role played by poly(vinylpyrrolidone) (PVP) in seed-mediated growth of Ag nanocrystals. Starting from Ag nanocubes encased by {100} facets as the seeds, the resultant nanocrystals could take different shapes depending on the concentration of PVP in the solution. If the concentration was above a critical value, the seeds simply grew into larger cubes still enclosed by {100} facets. When the concentration fell below a critical value, the seeds would evolve into cuboctahedrons enclosed by a mix of {100} and {111} facets and eventually octahedrons completely covered by {111} facets. We derived the coverage density of PVP on Ag(100) surface by combining the results from two measurements: (i) cubic seeds were followed to grow at a fixed initial concentration of PVP to find out when {111} facets started to appear on the surface, and (ii) cubic seeds were allowed to grow at reduced initial concentrations of PVP to see at which concentration {111} facets started to appear from the very beginning. We could calculate the coverage density of PVP from the differences in PVP concentration and the total surface area of Ag nanocubes between these two samples. The coverage density was found to be 140 and 30 repeating units per nm(2) for PVP of 55,000 and 10,000 g/mol in molecular weight, respectively, for cubic seeds of 40 nm in edge length. These values dropped slightly to 100 and 20 repeating units per nm(2), respectively, when 100 nm Ag cubes were used as the seeds.     

Direct Visualisation of the Surface Atomic Active Sites of Carbon-Supported Co3O4 Nanocrystals via High-Resolution Phase Restoration

The atomic arrangement of the terminating facets on spinel Co₃O₄ nanocrystals is strongly linked to their catalytic performance. However, the spinel crystal structure offers multiple possible surface terminations depending on the synthesis. Thus, understanding the terminating surface atomic structure is essential in developing high-performance Co₃O₄ nanocrystals. In this work, we present direct atomic-scale observation of the surface terminations of Co₃O₄ nanoparticles supported on hollow carbon spheres (HCSs) using exit wavefunction reconstruction from aberration-corrected transmission electron microscopy focal-series. The restored high-resolution phases show distinct resolved oxygen and cobalt atomic columns. The data show that the structure of {100}, {110}, and {111} facets of spinel Co₃O₄ exhibit characteristic active sites for carbon monoxide (CO) adsorption, in agreement with density functional theory calculations. Of these facets, the {100} and {110} surface terminations are better suited for CO adsorption than the {111}. However, the presence of oxygen on the {111} surface termination indicates this facet also plays an essential role in CO adsorption. Our results demonstrate direct evidence of the surface termination atomic structure beyond the assumed stoichiometry of the surface.     

高指数晶面纳米催化剂的电化学制备及应用

催化剂的性能与其表面结构及组成密切相关,高指数晶面纳米晶的表面含有高密度的台阶原子等活性位点而表现出较高的催化活性. 本文综述了电化学方波电位方法用于Pt、Pd、Rh等贵金属高指数晶面结构纳米晶催化剂的制备、形成机理及其电催化性能的研究. 针对贵金属利用率问题,还着重介绍了具有较高质量活性的小粒径Pt二十四面体的制备. 在此基础上,还介绍了电化学方波电位方法用于低共熔溶剂中制备高指数晶面纳米晶,以及高指数晶面纳米催化剂的表面修饰及应用;最后对高指数晶面纳米催化剂的发展做出了展望.     

Polyhedral AgBr Microcrystals with an Increased Percentage of Exposed {111} Facets as a Highly Efficient Visible‐Light Photocatalyst

Synthesis of inorganic single crystals with exposed high‐reactivity facets is a desirable target in the catalytic chemistry field. Polyhedral AgBr microcrystals with an increased percentage of exposed high‐reactivity {111} facets have been successfully prepared for the first time, and the photocatalytic performance of these microcrystals when used as an AgBr/Ag plasmonic photocatalyst was investigated. The results indicate that the as‐prepared sample has high photocatalytic activity and, under the same measurement conditions, the photodegradation rate of methyl orange dye over these microcrystals is at least four times faster than with other shapes of AgBr/Ag microstructure, as well as 20 times faster than with the highly efficient Ag₃PO₄ photocatalyst. DFT calculations suggest that the AgBr (111) surface is mainly composed of unsaturated Ag atoms and has a relatively high surface energy, both of which are favorable for enhancing the photocatalytic activity of the AgBr/Ag polyhedron photocatalyst. This work not only provides a highly efficient plasmonic photocatalyst of polyhedral AgBr/Ag microcrystals with an increased percentage of exposed high‐reactivity AgBr {111} facets, but also demonstrates that the shape and crystalline quality of the exposed facets have an important influence on the photocatalytic activities.     

Controlled Synthesis and Enhanced Catalytic and Gas‐Sensing Properties of Tin Dioxide Nanoparticles with Exposed High‐Energy Facets

A morphology evolution of SnO₂ nanoparticles from low‐energy facets (i.e., {101} and {110}) to high‐energy facets (i.e., {111}) was achieved in a basic environment. In the proposed synthetic method, octahedral SnO₂ nanoparticles enclosed by high‐energy {111} facets were successfully synthesized for the first time, and tetramethylammonium hydroxide was found to be crucial for the control of exposed facets. Furthermore, our experiments demonstrated that the SnO₂ nanoparticles with exposed high‐energy facets, such as {221} or {111}, exhibited enhanced catalytic activity for the oxidation of CO and enhanced gas‐sensing properties due to their high chemical activity, which results from unsaturated coordination of surface atoms, superior to that of low‐energy facets. These results effectively demonstrate the significance of research into improving the physical and chemical properties of materials by tailoring exposed facets of nanomaterials.     

Amine-assisted synthesis of concave polyhedral platinum nanocrystals having {411} high-index facets

High-index surfaces of a face-centered cubic metal (e.g., Pd, Pt) have a high density of low-coordinated surface atoms and therefore possess enhanced catalysis activity in comparison with low-index faces. However, because of their high surface energy, the challenge of chemically preparing metal nanocrystals having high-index facets remains. We demonstrate in this work that introducing amines as the surface controller allows concave Pt nanocrystals having {411} high-index facets to be prepared through a facile wet-chemical route. The as-prepared Pt nanocrystals display a unique octapod morphology with {411} facets. The presence of high-index {411} exposed facets endows the concave Pt nanocrystals with excellent electrocatalytic activity in the oxidation of both formic acid and ethanol.     

Nanocrystals composed of alternating shells of Pd and Pt can be obtained by sequentially adding different precursors

This paper describes a layer-by-layer epitaxial approach to the synthesis of multishelled nanocrystals composed of alternating shells of Pd and Pt by starting with seeds made of Pd or Pt nanocrystals. The synthesis was conducted by sequentially adding PtCl(4)(2-) and PdCl(4)(2-) salt precursors into a system containing either Pd or Pt seeds (in the shape of cuboctahedrons, octahedrons, plates, or cubes) together with a weak reducing agent such as citric acid (CA). The slow reduction kinetics associated with CA played an important role in the epitaxial growth of one metal on the other, resulting in the formation of Pd-Pt multishelled nanocrystals. Owing to the capping effect of CA for {111} facets of Pd and Pt, the multishelled nanocrystals tended to be enclosed by {111} facets in the form of octahedrons or thin plates, depending on the shapes of the Pd or Pt seeds: octahedrons for cuboctahedral, cubic, or octahedral seeds, and plates for platelike seeds.     

The Effects of Exposed Specific Facets and Sulfation on the Surface Acidity of Cu2O Solids

Cuprous oxide microcrystals with {111}, {111}/{100}, and {100} exposed facets were synthesized. ³¹P MAS NMR using trimethylphosphine as the probe molecule was employed to study the acidic properties of samples. It was found that the total acidic density of samples increases evidently after sulfation compared with the pristine cuprous oxide microcrystals. During sulfation, new {100} facets are formed at the expense of {111} facets and lead to the generation of two Lewis acid sites due to the different binding states of SO₄²⁻ on {111} and {100} facets. Moreover, DFT calculation was used to illustrate the binding models of SO₄²⁻ on {111} and {100} facets. Also, a Pechmann condensation reaction was applied to study the acidic catalytic activity of these samples. It was found that the sulfated {111} facet has better activity due to its higher Lewis acid density compared with the sulfated {100} facet.     

Morphological evolution of Cu2O nanocrystals in an acid solution: stability of different crystal planes

The morphological evolution of uniform Cu(2)O nanocrystals with different morphologies in a weak acetic acid solution (pH = 3.5) has been studied for cubic, octahedral, rhombic dodecahedral, {100} truncated octahedral, and {110} truncated octahedral nanocrystals. Cu(2)O nanocrystals undergo oxidative dissolution in weak acid solution, but their morphological changes depend on the exposed crystal planes. We found that the stability of Cu(2)O crystal planes in weak acid solution follows the order of {100} ? {111} > {110} and determines how the morphology of Cu(2)O nanocrystals evolves. The stable {100} crystal planes remain, and new {100} facets form at the expense of the less stable {111} and {110} crystal planes on the surface of Cu(2)O nanocrystals. Density functional theory calculations reveal that the Cu-O bond on Cu(2)O(100) surface has the shortest bond length. These results clearly exemplify that the morphology of inorganic crystals will evolve with the change of local chemical environment, shedding light on fundamentally understanding the morphological evolution of natural minerals and providing novel insights into the geomimetic synthesis of inorganic materials in the laboratory.     

Facet‐Dependent and Light‐Assisted Efficient Hydrogen Evolution from Ammonia Borane Using Gold–Palladium Core–Shell Nanocatalysts

Au–Pd core–shell nanocrystals with tetrahexahedral (THH), cubic, and octahedral shapes and comparable sizes were synthesized. Similar‐sized Au and Pd cubes and octahedra were also prepared. These nanocrystals were used for the hydrogen‐evolution reaction (HER) from ammonia borane. Light irradiation can enhance the reaction rate for all the catalysts. In particular, Au–Pd THH exposing {730} facets showed the highest turnover frequency for hydrogen evolution under light with 3‐fold rate enhancement benefiting from lattice strain, modified surface electronic state, and a broader range of light absorption. Finite‐difference time‐domain (FDTD) simulations show a stronger electric field enhancement on Au–Pd core–shell THH than those on other Pd‐containing nanocrystals. Light‐assisted nitro reduction by ammonia borane on Au–Pd THH was also demonstrated. Au–Pd tetrahexahedra supported on activated carbon can act as a superior recyclable plasmonic photocatalyst for hydrogen evolution.     

钯纳米晶体在电催化甲酸氧化反应中的形貌效应

本文基于课题组前期工作,选用适当的金属前驱物、还原剂、稳定剂和保护剂,通过调控氧化刻蚀和反应动力学等,成功合成了形貌和尺寸均不相同的Pd纳米晶.经过认真的纳米粒子清洗和电极修饰组装,考察了它们在电催化甲酸氧化反应中的形貌与性能的关系.研究结果表明,Pd纳米晶样品的最大电流密度以纳米八面体（nanooctahedra）、纳米线（nanowires）、纳米立方体（nanocubes）、纳米瓜子（nanotapers）、凹面纳米立方体（concave nanocubes）的顺序递增,催化甲酸氧化反应的起始氧化电位均小于0.2V.研究结果印证了Pd纳米晶催化甲酸氧化反应的催化性能在尺寸效应上主要受活性表面积的影响,扣除表面积效应后的催化性能与其尺寸没有明确关系.该系列Pd纳米晶的催化性能主要取决于其表面结构,得出Pd纳米晶催化甲酸氧化反应遵循{111}晶面〈{100}晶面〈高指数晶面的性能活性顺序.综合最大电流密度和最小操作电位因素发现,Pd凹面纳米立方体和Pd纳米瓜子具有相对较好的商用价值.     

Synthesis of Pd-Pt bimetallic nanocrystals with a concave structure through a bromide-induced galvanic replacement reaction

This article describes a systematic study of the galvanic replacement reaction between PtCl(6)(2-) ions and Pd nanocrystals with different shapes, including cubes, cuboctahedrons, and octahedrons. It was found that Br(-) ions played an important role in initiating, facilitating, and directing the replacement reaction. The presence of Br(-) ions led to the selective initiation of galvanic replacement from the {100} facets of Pd nanocrystals, likely due to the preferential adsorption of Br(-) ions on this crystallographic plane. The site-selective galvanic replacement resulted in the formation of Pd-Pt bimetallic nanocrystals with a concave structure owing to simultaneous dissolution of Pd atoms from the {100} facets and deposition of the resultant Pt atoms on the {111} facets. The Pd-Pt concave nanocubes with different weight percentages of Pt at 3.4, 10.4, 19.9, and 34.4 were also evaluated as electrocatalysts for the oxygen reduction reaction (ORR). Significantly, the sample with a 3.4 wt.% of Pt exhibited the largest specific electrochemical surface area and was found to be four times as active as the commercial Pt/C catalyst for the ORR in terms of equivalent Pt mass.     

Crystal‐Facet Engineering of Ferric Giniite by Using Ionic‐Liquid Precursors and Their Enhanced Photocatalytic Performances under Visible‐Light Irradiation

In the work presented here, well‐dispersed ferric giniite microcrystals with controlled sizes and shapes are solvothermally synthesized from ionic‐liquid precursors by using 1‐n‐butyl‐3‐methylimidazolium dihydrogenphosphate ([Bmim][H₂PO₄]) as phosphate source. The success of this synthesis relies on the concentration and composition of the ionic‐liquid precursors. By adjusting the molar ratios of Fe(NO₃)₃ ? 9H₂O to [Bmim][H₂PO₄] as well as the composition of ionic‐liquid precursors, we obtained uniform microstructures such as bipyramids exposing {111} facets, plates exposing {001} facets, hollow spheres, tetragonal hexadecahedron exposing {441} and {111} facets, and truncated bipyamids with carved {001} facets. The crystalline structure of the ferric giniite microcrystals is disclosed by various characterization techniques. It was revealed that [Bmim][H₂PO₄] played an important role in stabilizing the {111} facets of ferric giniite crystals, leading to the different morphologies in the presence of ionic‐liquid precursors with different compositions. Furthermore, since these ferric giniite crystals were characterized by different facets, they could serve as model Fenton‐like catalysts to uncover the correlation between the surface and the catalytic performance for the photodegradation of organic dyes under visible‐light irradiation. Our measurements indicate that the photocatalytic activity of as‐prepared Fenton‐like catalysts is highly dependent on the exposed facets, and the surface area has essentially no obvious effect on the photocatalytic degradation of organic dyes in the present study. It is highly expected that these findings are useful in understanding the photocatalytic activity of Fenton‐like catalysts with different morphologies, and suggest a promising new strategy for crystal‐facet engineering of photocatalysts for wastewater treatment based on heterogeneous Fenton‐like process.     

Shape-dependent electrocatalytic activity of monodispersed gold nanocrystals toward glucose oxidation

We systematically explore the shape-dependent catalytic activities of Au nanocrystals toward glucose oxidation in alkaline electrolytes, which is strongly dependent on the shape of the Au nanocrystals. The {100}-bounded cubic Au nanocrystals are significantly more active than the {110}-bounded rhombic dodecahedral and {111}-bounded octahedral Au nanocrystals.     

Design of Pd{111}-TiO_2 interface for enhanced catalytic efficiency towards formic acid decomposition

Supports are commonly implemented in the industrial application of heterogeneous catalysts to improve the stability and recyclability of catalysts.The supported catalysts often show the enhanced activity and selectivity in various catalytic reactions.However,the specific contributions of electronic and steric effects to a catalytic system often remain elusive due to the lack of well-defined model systems.In this work,two types of uniform Pd nanocrystals covered by{111}facets in tetrahedral and octahedral shapes,respectively,are synthesized with identical chemical environment and loaded on Ti O_2supports to form hybrid structures(Pd{111}-Ti O_2)towards the application of formic acid decomposition.Our observation suggests that the polarization effect at the interface of Pd-Ti O_2enhances its activity in formic acid decomposition.Moreover,the Pd tetrahedrons-Ti O_2hybrid structure whose Pd{111}-Ti O_2interface possesses a larger angle shows higher catalytic activity,owing to the reduced steric effect as compared to Pd octahedrons-Ti O_2.This study reveals the nature of interface effects in formic acid decomposition,and provides a guidance for the related catalyst design.     

Metal Ions Induce Growth and Magnetism Alternation of α‐Fe2O3 Crystals Bound by High‐Index Facets

In this study, quasi‐cubic and hexagonal bipyramid α‐Fe₂O₃ polyhedrons with high‐index facets exposed were controllably synthesized by applying metal ions Zn²⁺ or Cu²⁺ as structure‐directing agents. The growth of the α‐Fe₂O₃ nanostructures with high‐index facets were induced by metal ions without the addition of any other surfactants. The quasi‐cubic form controlled by Zn²⁺ looks like a cube but has an angle of approximately 86° bound by (012), (10‐2), and (1‐12) facets, whereas the hexagonal bipyramid form controlled by Cu²⁺ has a sixfold axis bound by {012} facets. Magnetic measurements confirm that these two kinds of nanocrystals display shape‐ and surface‐dependent magnetic behaviors. The hexagonal bipyramid iron oxide nanocrystals show a lower Morin transition temperature of 240 K and might be spin‐canted ferromagnetically controlled at room temperature, and the ferromagnetism disappears at low temperature. The quasi‐cubic nanocrystals have a splitting between FC curve and ZFC curve from the highest experimental temperature and no Morin transformation occurs; this indicates that they would be defect ferromagnetically controlled at low temperature. The reported metal‐ion‐directing technique could provide a universal method for shape‐ and surface‐controlled synthesis of nanocrystals with high‐index facets exposed.