纳米Pd的形貌和尺寸可控制备及其1,4-丁炔二醇加氢性能

采用化学还原法合成Pd纳米立方体,并将其作为晶种,进一步合成大尺寸的纳米Pd立方体以及具有不同{100}和{111}晶面比例的纳米Pd多面体.将形貌和尺寸可控的纳米Pd溶胶应用于1,4-丁炔二醇催化加氢的反应中,反应结果表明,纳米Pd的催化性能取决于其尺寸和形貌.{111}晶面的催化活性高于{100}晶面,PVP稳定的Pd胶体对1,4-丁烯二醇均具有较高选择性,具有适当{100}和{111}晶面比例的纳米Pd多面体对1,4-丁烯二醇的选择性可达96%.     

氧化铈形貌对Pd纳米粒子分散的影响

氧化铈由于在氧化和还原气氛下具有快速Ce4+/Ce3+氧化还原循环作用,使其具有优异的储放氧能力,不仅可以分散和稳定金属粒子,还可在界面处与金属物种发生化学键合,并形成活性位点,因此已被广泛应用于多个催化反应体系,且表现出显著的形貌效应.通过对氧化铈形貌进行调控,使其暴露特定(111)、(110)和(100)晶面,已成为调节金属-氧化铈相互作用强度及金属物种电子、几何结构,提高催化性能的有效策略,但对其机制及活性位结构还没有清晰的认识.我们以氧化铈纳米粒子和纳米立方体为载体,其中氧化铈立方体平均尺寸为23 nm,主要暴露6个{100}晶面,边缘和截角暴露少量{110}及{111}晶面;球形氧化铈纳米粒子平均尺寸为11 nm,主要暴露{111}晶面;并进一步将2.0 wt％Pd物种分散在氧化铈立方体和球形纳米粒子上,通过扫描透射电子显微镜(STEM)和X射线光电子能谱(XPS)等研究了钯物种在氧化铈球形粒子和立方体上的原子结构和化学环境,进而分析了纳米结构氧化铈形貌对钯物种分散的影响.在球形氧化铈纳米粒子上主要形成了平均尺寸为2.0 nm的非晶态Pd纳米粒子以及极小的Pd物种,这主要是因为球形氧化铈纳米粒子上丰富的表面氧空位可通过Pd-CeO2强相互作用和Pd物种紧密键合.氧化铈立方体上的晶态Pd粒子尺寸为2.9 nm,金属与载体之间具有明显的界面,且Pd原子嵌入到氧化铈晶格中.同时,CO化学吸附测试也证明了氧化铈球形粒子上的钯分散度(70％)高于氧化铈立方体(52％).对于甲烷燃烧反应,主要涉及发生在金属粒子表面的PdO/Pd氧化还原循环,即Pd被O2氧化,PdO被CH4还原,富氧条件下决速步骤是PdO对CH4中C?H的活化,因此氧化铈立方体表面大尺寸的晶态Pd粒子被氧化后更容易被CH4还原,有利于PdO/Pd氧化还原循环,从而具有更高的活性和稳定性;然而在CO氧化反应中Pd/CeO2却呈现了相反的形貌效应,这是由于该反应遵循Mars-van Krevelen机理:CO吸附在金属Pd上,化学吸附的CO移动到钯-氧化铈界面,被氧化铈晶格氧氧化成CO2,产生的氧空位被表面氧补充,最后表面氧空位被气相氧补充;由于氧化铈球形粒子上的较小尺寸Pd具有更大的钯-氧化铈界面周长和更强的氧物种移动性,更易完成界面处的氧化还原循环,因此具有更高的CO氧化活性.     

Co_3O_4纳米立方体的可控合成及其CO氧化反应性能

在乙醇和三乙胺的混合溶液中,采用溶剂热法制备了尺寸为10 nm的Co3O4立方体.考察了钴盐前驱体和溶解氧对Co3O4纳米立方体结构的影响规律,通过对合成过程中不同阶段产物的结构分析和表征,提出了Co3O4纳米立方体的形成机制是溶解再结晶的过程.将所制备的Co3O4纳米立方体在200°C焙烧处理后,尺寸和形貌均可保持稳定,但400°C焙烧后,变为球形纳米粒子.这种主要暴露{100}晶面的Co3O4纳米立方体催化CO氧化反应的活性低于纳米粒子({111}晶面),验证了四氧化三钴纳米材料在CO氧化反应中的晶面效应.     

从头开始理解形貌依赖的CuOx-CeO2相互作用

CuOx/CeO2催化剂在CO氧化反应中表现出高催化活性和显著结构敏感性.文献报道中CuOx/CeO2催化剂体系的合成条件差异较大,从而导致观察到的CuOx-CeO2相互作用存在较大争议.因此,系统研究并阐明CuOx/CeO2催化剂中CuOx-CeO2相互作用对于理解复杂的CuOx-CeO2界面催化作用具有重要的研究意义.近期发现,氧化物纳米晶的形貌可作为一种新的结构参数,在不改变氧化物催化剂组成的条件下实现其结构和性能的调控.本文以不同形貌CeO2纳米晶为载体,包括优先暴露{110}+{100}晶面的CeO2纳米棒、优先暴露{100}晶面的CeO2纳米立方体和优先暴露{111}晶面的CeO2纳米多面体,采用等体积浸渍方法合成了Cu担载量为0.025%~5%的CuOx/CeO2纳米晶催化剂,结合谱学和电镜表征方法,以及CO吸附原位红外光谱,系统研究了CuOx物种在不同形貌CeO2纳米晶上的结构演化及其催化CO氧化的构-效关系.结构表征结果表明, CuOx物种结构不仅依赖于Cu的担载量,也依赖于载体CeO2的形貌.随着Cu担载量的增加, CuOx物种优先沉积在CeO2的表面缺陷位,然后聚集和长大;同时伴随着CuOx物种从孤立Cu离子到与载体强/弱相互作用的CuOx团簇,高分散Cu O颗粒和大尺寸Cu O颗粒.孤立Cu^+离子和与载体弱相互作用CuOx团簇主要形成于CeO2纳米立方体的表面,这可能与CeO2纳米立方体暴露的氧终止CeO2{100}晶面相关.CO吸附原位红外结果表明, CuOx团簇与不同CeO2表面相互作用的强度顺序为:CeO2纳米棒暴露的{110}面>CeO2纳米多面体暴露的{111}面>CeO2纳米立方体暴露的{100}面.CeO2纳米立方体与Cu2+离子间相互作用弱于与Cu^+之间的,因此CeO2纳米立方体负载的CuOx物种在CO还原过程中容易停留在稳定的Cu^+中间物种;而CeO2纳米棒与Cu2+离子之间的相互作用强于与Cu^+之间的相互作用,因此CeO2纳米棒负载的CuOx物种在CO还原过程中容易形成金属铜.因此CO吸附原位红外光谱观察到CeO2纳米立方体负载CuOx催化剂中吸附在Cu^+的CO物种远远多于CeO2纳米棒负载CuOx催化剂.CO氧化反应结果表明, CuOx/CeO2催化剂表现出同时依赖于CuOx物种结构和CeO2形貌的结构敏感性.CuOx/CeO2催化剂活性表现出与CuOx/CeO2催化剂的CO还原性能的正相关性,说明中CuOx/CeO2催化CO氧化反应遵循Mv K反应机理.这些结果系统地关联了CeO2形貌, CuOx-CeO2相互作用, CuOx物种结构和CeO2还原性能, CuOx/CeO2催化CO氧化反应活性.     

从头开始理解形貌依赖的CuOx-CeO_2相互作用（英文）

CuO_x/CeO_2催化剂在CO氧化反应中表现出高催化活性和显著结构敏感性.文献报道中CuO_x/CeO_2催化剂体系的合成条件差异较大,从而导致观察到的CuO_x-CeO_2相互作用存在较大争议.因此,系统研究并阐明CuO_x/CeO_2催化剂中CuO_x-CeO_2相互作用对于理解复杂的CuO_x-CeO_2界面催化作用具有重要的研究意义.近期发现,氧化物纳米晶的形貌可作为一种新的结构参数,在不改变氧化物催化剂组成的条件下实现其结构和性能的调控.本文以不同形貌CeO_2纳米晶为载体,包括优先暴露{110}+{100}晶面的CeO_2纳米棒、优先暴露{100}晶面的CeO_2纳米立方体和优先暴露{111}晶面的CeO_2纳米多面体,采用等体积浸渍方法合成了Cu担载量为0.025%～5%的CuO_x/CeO_2纳米晶催化剂,结合谱学和电镜表征方法,以及CO吸附原位红外光谱,系统研究了CuO_x物种在不同形貌CeO_2纳米晶上的结构演化及其催化CO氧化的构-效关系.结构表征结果表明, CuO_x物种结构不仅依赖于Cu的担载量,也依赖于载体CeO_2的形貌.随着Cu担载量的增加, CuO_x物种优先沉积在CeO_2的表面缺陷位,然后聚集和长大;同时伴随着CuO_x物种从孤立Cu离子到与载体强/弱相互作用的CuO_x团簇,高分散Cu O颗粒和大尺寸Cu O颗粒.孤立Cu+离子和与载体弱相互作用CuO_x团簇主要形成于CeO_2纳米立方体的表面,这可能与CeO_2纳米立方体暴露的氧终止CeO_2{100}晶面相关.CO吸附原位红外结果表明, CuO_x团簇与不同CeO_2表面相互作用的强度顺序为:CeO_2纳米棒暴露的{110}面CeO_2纳米多面体暴露的{111}面CeO_2纳米立方体暴露的{100}面.CeO_2纳米立方体与Cu2+离子间相互作用弱于与Cu+之间的,因此CeO_2纳米立方体负载的CuO_x物种在CO还原过程中容易停留在稳定的Cu+中间物种;而CeO_2纳米棒与Cu2+离子之间的相互作用强于与Cu+之间的相互作用,因此CeO_2纳米棒负载的CuO_x物种在CO还原过程中容易形成金属铜.因此CO吸附原位红外光谱观察到CeO_2纳米立方体负载CuO_x催化剂中吸附在Cu+的CO物种远远多于CeO_2纳米棒负载CuO_x催化剂.CO氧化反应结果表明, CuO_x/CeO_2催化剂表现出同时依赖于CuO_x物种结构和CeO_2形貌的结构敏感性.CuO_x/CeO_2催化剂活性表现出与CuO_x/CeO_2催化剂的CO还原性能的正相关性,说明中CuO_x/CeO_2催化CO氧化反应遵循Mv K反应机理.这些结果系统地关联了CeO_2形貌, CuO_x-CeO_2相互作用, CuO_x物种结构和CeO_2还原性能, CuO_x/CeO_2催化CO氧化反应活性.     

Co3O4纳米立方体的可控合成及其CO氧化反应性能

在乙醇和三乙胺的混合溶液中,采用溶剂热法制备了尺寸为10 nm的Co₃O₄立方体. 考察了钴盐前驱体和溶解氧对Co₃O₄纳米立方体结构的影响规律,通过对合成过程中不同阶段产物的结构分析和表征,提出了Co₃O₄纳米立方体的形成机制是溶解再结晶的过程. 将所制备的Co₃O₄纳米立方体在200 ℃焙烧处理后,尺寸和形貌均可保持稳定,但400 ℃焙烧后,变为球形纳米粒子. 这种主要暴露{100}晶面的Co₃O₄纳米立方体催化CO氧化反应的活性低于纳米粒子({111}晶面),验证了四氧化三钴纳米材料在CO氧化反应中的晶面效应.     

单原子层Pd壳的Pt_3Ni纳米立方体的甲酸氧化性能（英文）

通过一种结合了CO辅助合成Pt_3Ni纳米立方粒子和单原子层Cu壳欠电位沉积再置换为Pd的方法,成功制备出了具有单原子层Pd壳和Pt_3Ni纳米立方粒子核结构的Pt_3Ni@Pd/C催化剂。电感耦合等离子体元素分析、X射线衍射和透射电子显微镜法被用于研究表征此种Pt_3Ni@Pd/C催化剂,结果显示大部分Pt_3Ni纳米粒子的表面都由{100}族的晶面所构成。而且在这些{100}族的晶面上,单原子层Pd壳通过电沉积的外延生长,也获得了{100}族的晶面。本文进一步对Pt_3Ni@Pd/C作为甲酸氧化电催化剂的性能进行了研究,并与商业Pd/C和原Pt_3Ni/C催化剂进行了比较。结果显示,由于Pt_3Ni@Pd/C的单原子层Pd壳的结构和所暴露出的Pd{100}族的晶面,Pt_3Ni@Pd/C催化剂具有优异的甲酸氧化电催化性能。与原Pt_3Ni/C催化剂相比较,Pt_3Ni@Pd/C催化剂的贵金属质量比活性提高到了7.5倍。此外,与商业Pd/C催化剂相比,Pt_3Ni@Pd/C催化剂的比表面活性和Pd质量比活性也分别提高到了2.5和8.3倍。     

铜-氧化铈界面:几何及电子结构

纳米催化材料的性能主要由粒子尺寸、形貌和界面决定,即活性位点的电子及几何结构.尺寸、形貌可控的纳米催化材料的合成及其反应性能的研究,即催化剂的构效关系,一直是催化领域的研究热点.氧化物负载的金属催化剂广泛应用于多相催化反应过程.基于氧化铈优异的氧化还原性能, Cu/CeO2催化剂在CO氧化、N2O消除、水气变换、甲醇合成等反应中表现出优异性能.其中,通过铜物种与氧化铈表面化学键合形成的金属-载体界面通常被认为是催化活性中心.铜物种和氧化铈的相互作用主要体现在氧化铈固定铜物种,而铜物种促进氧化铈的氧化还原能力,涉及Cu^2+/Cu^+/Cu^0和Ce^3+/Ce^4+之间电子的传输和转移.Cu/CeO2催化剂活性位的原子结构与金属-载体相互作用程度密切相关.氧化铈形貌和铜负载量是决定界面电子和几何结构的重要因素.常见的纳米氧化铈形貌包括纳米粒子(多面体)、纳米棒和纳米立方体,可分别选择性暴露(111)、(110)和(100)晶面;这些晶面上原子配位环境和化学性能决定了铜-氧化铈的键合方式和界面结构.与暴露{100}晶面的纳米立方体相比,主要暴露{100}/{110}镜面的氧化铈纳米棒、暴露{111}/{100}晶面的纳米粒子与铜物种具有更强的金属-载体相互作用程度,也更有利于铜物种的分散.铜的负载量也显著影响铜物种在特定氧化铈表面的分散度和化学状态;随着铜负载量的增加,可在氧化铈表面形成层状铜、铜团簇和铜纳米粒子.通常情况下,低负载量有利于单层、双层铜物种的形成,高负载量时则出现多层铜和铜纳米粒子.催化活性位通常是由铜原子与氧化铈上的氧空穴相互作用产生,与氧化铈表面氧空穴的数量和密度密切相关,即氧化铈形貌.本文总结了Cu/CeO2催化剂的研究进展,讨论了氧化铈形貌和铜负载量对铜物种分散度和化学状态的影响规律,总结了铜氧化铈界面结构的多维度表征结果,比较了Cu/CeO2催化剂在CO氧化、水气变换及甲醇合成中的活性位结构和反应机制.     

铜-氧化铈界面:几何及电子结构（英文）

纳米催化材料的性能主要由粒子尺寸、形貌和界面决定,即活性位点的电子及几何结构.尺寸、形貌可控的纳米催化材料的合成及其反应性能的研究,即催化剂的构效关系,一直是催化领域的研究热点.氧化物负载的金属催化剂广泛应用于多相催化反应过程.基于氧化铈优异的氧化还原性能, Cu/CeO_2催化剂在CO氧化、N_2O消除、水气变换、甲醇合成等反应中表现出优异性能.其中,通过铜物种与氧化铈表面化学键合形成的金属-载体界面通常被认为是催化活性中心.铜物种和氧化铈的相互作用主要体现在氧化铈固定铜物种,而铜物种促进氧化铈的氧化还原能力,涉及Cu~(2+)/Cu~+/Cu~0和Ce~(3+)/Ce~(4+)之间电子的传输和转移.Cu/CeO_2催化剂活性位的原子结构与金属-载体相互作用程度密切相关.氧化铈形貌和铜负载量是决定界面电子和几何结构的重要因素.常见的纳米氧化铈形貌包括纳米粒子(多面体)、纳米棒和纳米立方体,可分别选择性暴露(111)、(110)和(100)晶面;这些晶面上原子配位环境和化学性能决定了铜-氧化铈的键合方式和界面结构.与暴露{100}晶面的纳米立方体相比,主要暴露{100}/{110}镜面的氧化铈纳米棒、暴露{111}/{100}晶面的纳米粒子与铜物种具有更强的金属-载体相互作用程度,也更有利于铜物种的分散.铜的负载量也显著影响铜物种在特定氧化铈表面的分散度和化学状态;随着铜负载量的增加,可在氧化铈表面形成层状铜、铜团簇和铜纳米粒子.通常情况下,低负载量有利于单层、双层铜物种的形成,高负载量时则出现多层铜和铜纳米粒子.催化活性位通常是由铜原子与氧化铈上的氧空穴相互作用产生,与氧化铈表面氧空穴的数量和密度密切相关,即氧化铈形貌.本文总结了Cu/CeO_2催化剂的研究进展,讨论了氧化铈形貌和铜负载量对铜物种分散度和化学状态的影响规律,总结了铜氧化铈界面结构的多维度表征结果,比较了Cu/CeO_2催化剂在CO氧化、水气变换及甲醇合成中的活性位结构和反应机制.     

单原子层Pd壳的Pt3Ni纳米立方体的甲酸氧化性能

通过一种结合了CO辅助合成Pt₃Ni纳米立方粒子和单原子层Cu壳欠电位沉积再置换为Pd的方法,成功制备出了具有单原子层Pd壳和Pt₃Ni纳米立方粒子核结构的Pt₃Ni@Pd/C催化剂。电感耦合等离子体元素分析、X射线衍射和透射电子显微镜法被用于研究表征此种Pt₃Ni@Pd/C催化剂,结果显示大部分Pt₃Ni纳米粒子的表面都由{100}族的晶面所构成。而且在这些{100}族的晶面上,单原子层Pd壳通过电沉积的外延生长,也获得了{100}族的晶面。本文进一步对Pt₃Ni@Pd/C作为甲酸氧化电催化剂的性能进行了研究,并与商业Pd/C和原Pt₃Ni/C催化剂进行了比较。结果显示,由于Pt₃Ni@Pd/C的单原子层Pd壳的结构和所暴露出的Pd{100}族的晶面,Pt₃Ni@Pd/C催化剂具有优异的甲酸氧化电催化性能。与原Pt₃Ni/C催化剂相比较,Pt₃Ni@Pd/C催化剂的贵金属质量比活性提高到了7.5倍。此外,与商业Pd/C催化剂相比,Pt₃Ni@Pd/C催化剂的比表面活性和Pd质量比活性也分别提高到了2.5和8.3倍。     

Amine-assisted synthesis of concave polyhedral platinum nanocrystals having {411} high-index facets

High-index surfaces of a face-centered cubic metal (e.g., Pd, Pt) have a high density of low-coordinated surface atoms and therefore possess enhanced catalysis activity in comparison with low-index faces. However, because of their high surface energy, the challenge of chemically preparing metal nanocrystals having high-index facets remains. We demonstrate in this work that introducing amines as the surface controller allows concave Pt nanocrystals having {411} high-index facets to be prepared through a facile wet-chemical route. The as-prepared Pt nanocrystals display a unique octapod morphology with {411} facets. The presence of high-index {411} exposed facets endows the concave Pt nanocrystals with excellent electrocatalytic activity in the oxidation of both formic acid and ethanol.     

Ethylenediamine tetramethylene phosphonic acid assisted synthesis of palladium nanocubes and their electrocatalysis of formic acid oxidation

The synthesis of Pd nanocrystals of controlled size and morphology has drawn enormous interest due to their catalytic activity. We report a new and efficient strategy for the one-step synthesis of monodispersed Pd nanocubes with ethylenediamine tetramethylene phosphonate (EDTMP) as a complex-forming and capping agent. The morphology, structure, and growth mechanism of the Pd nanocubes were fully characterized via selected area electron diffraction (SAED), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). It was found that the morphology of the Pd nanocrystals in the proposed EDTMP–PdCl₂ system could be changed from octahedrons to nanocubes simply by adjusting the amount of iodide used during synthesis. After UV/ozone and electrochemical cleaning, the as-prepared Pd nanocubes demonstrated excellent electrocatalytic activity and stability during formic acid oxidation, owing to their abundant {100} facets and small particle size.     

PVP封端剂对Pd纳米晶电催化氧化甲醇和乙醇性能的影响

Direct alcohol fuel cells (DAFCs) have attracted considerable research interest because of their potential application as alternative power sources for automotive systems and portable electronics. Pd-based catalysts represent one of the most popular catalysts for DAFCs due to their excellent electrocatalytic activities in alkaline electrolytes. Thus, it is of great importance to understand the structure-activity relationship of Pd electrocatalysts for alcohol electrocatalysis. Recently, size- and shape- controlled Pd nanocrystals have been successfully synthesized and subsequently used to study the size and shape effects of Pd electrocatalysts on alcohol electrocatalysis, in which the Pd (100) facet exhibited higher electrocatalytic oxidation activity for small alcohol molecules than the Pd (111) and (110) facets. Although it is well known that capping ligands, which are widely used in wet chemistry for the size- and shape-controlled synthesis of metal nanocrystals, likely chemisorb onto the surfaces of the resulting metal nanocrystals and influence their surface structure and surface-mediated properties, such as catalysis, this issue was not considered in previous studies of Pd nanocrystal electrocatalysts for electrocatalytic oxidation of small alcohol molecules. In this study, we prepared polyvinylpyrrolidone (PVP)-capped Pd nanocrystals with different morphologies and sizes and comparatively studied their electrocatalytic activities for methanol and ethanol oxidation in alkaline solutions. The chemisorbed PVP molecules transferred charge to the Pd nanocrystals, and the finer Pd nanocrystals had a higher coverage of chemisorbed PVP, and thus exposed fewer accessible surface sites, experienced more extensive PVP-to-Pd charge transfer, and were more negatively charged. The intrinsic electrocatalytic activity, represented by the electrochemical surface area (ECSA)-normalized electrocatalytic activity, of Pd nanocubes with exposed (100) facets increases with the particle size, indicating that the more negatively-charged Pd surface is less electrocatalytically active. The Pd nanocubes with average sizes between 12 and 19 nm are intrinsically more electrocatalytically active than commercial Pd black electrocatalysts, while the activity of Pd nanocubes with an averages size of 8 nm is less. This suggests that the enhancement effect of the exposed (100) facets surpasses the deteriorative effect of the negatively charged Pd surface for the Pd nanocubes with average sizes between 12 and 19 nm, whereas the deteriorative effect of the negatively charged Pd surface surpasses the enhancement effect of the exposed (100) facets for the Pd nanocubes with average sizes of 8 nm due to the extensive PVP-to-Pd charge transfer. Moreover, the Pd nanocubes with average sizes of 8 nm exhibit similar intrinsic electrocatalytic activity to the Pd nanooctahedra with (111) facets exposed and average sizes of 7 nm, indicating that the electronic structure of Pd electrocatalysts plays a more important role in influencing the electrocatalytic activity than the exposed facet. Since the chemisorbed PVP molecules block the surface sites on Pd nanocrystals that are accessible to the reactants, all Pd nanocrystals exhibit lower mass-normalized electrocatalytic activity than the Pd black electrocatalysts, and the mass-normalized electrocatalytic activity increases with the ECSA. These results clearly demonstrate that the size- and shape-dependent electrocatalytic activity of Pd nanocrystals capped with PVP for methanol and ethanol oxidation should be attributed to both the exposed facets of the Pd nanocrystals and the size-dependent electronic structures of the Pd nanocrystals resulting from the size-dependent PVP coverage and PVP-to-Pd charge transfer. Therefore, capping ligands on capped metal nanocrystals inevitably influence their surface structures and surface-mediated properties, which must be considered for a comprehensive understanding of the structure-activity relationship of capped metal nanocrystals.     

Facile synthesis and electrochemiluminescence application of concave trisoctahedral Pd@Au core-shell nanocrystals bound by {331} high-index facets

Concave trisoctahedral (TOH) Pd@Au core-shell nanocrystals bound by {331} facets have been synthesized for the first time. Pd nanocubes and cetyltrimethylammonium chloride were used as the structure-directing cores and capping agents, respectively. Their optical and electrocatalytic properties were investigated.     

高指数晶面纳米催化剂的电化学制备及应用

催化剂的性能与其表面结构及组成密切相关,高指数晶面纳米晶的表面含有高密度的台阶原子等活性位点而表现出较高的催化活性. 本文综述了电化学方波电位方法用于Pt、Pd、Rh等贵金属高指数晶面结构纳米晶催化剂的制备、形成机理及其电催化性能的研究. 针对贵金属利用率问题,还着重介绍了具有较高质量活性的小粒径Pt二十四面体的制备. 在此基础上,还介绍了电化学方波电位方法用于低共熔溶剂中制备高指数晶面纳米晶,以及高指数晶面纳米催化剂的表面修饰及应用;最后对高指数晶面纳米催化剂的发展做出了展望.     

Synthesis of nanocrystals with variable high-index Pd facets through the controlled heteroepitaxial growth of trisoctahedral Au templates

The shape-controlled synthesis of noble metal nanocrystals (NCs) bounded by high-index facets is a current research interest because the products have the potential of significantly improving the catalytic performance of NCs in industrially important reactions. This study reports a versatile method for synthesizing polyhedral NCs enclosed by a variety of high-index Pd facets. The method is based on the heteroepitaxial growth of Pd layers on concave trisoctahedral (TOH) gold NC seeds under careful control of the growth kinetics. Polyhedral Au@Pd NCs with three different classes of high-index facets, including concave TOH NCs with {hhl} facets, concave hexoctahedral (HOH) NCs with {hkl} facets, and tetrahexahedral (THH) NCs with {hk0} facets, can be formed in high yield. The Miller indices of NCs are also modifiable, and we have used the THH NCs as a demonstrative example. The catalytic activities of these NCs were evaluated by the structure-sensitive reaction of formic acid electro-oxidation. The results showed that the high-index facets are generally more active than the low-index facets. In summary, a seeded growth process based on concave high-index faceted monometallic TOH NC templates and careful control of the growth kinetics is a simple and effective strategy for the synthesis of noble metal NCs with high-index facets. It also offers tailorability of the surface structure in shape-controlled synthesis.     

Design of Pd{111}-TiO_2 interface for enhanced catalytic efficiency towards formic acid decomposition

Supports are commonly implemented in the industrial application of heterogeneous catalysts to improve the stability and recyclability of catalysts.The supported catalysts often show the enhanced activity and selectivity in various catalytic reactions.However,the specific contributions of electronic and steric effects to a catalytic system often remain elusive due to the lack of well-defined model systems.In this work,two types of uniform Pd nanocrystals covered by{111}facets in tetrahedral and octahedral shapes,respectively,are synthesized with identical chemical environment and loaded on Ti O_2supports to form hybrid structures(Pd{111}-Ti O_2)towards the application of formic acid decomposition.Our observation suggests that the polarization effect at the interface of Pd-Ti O_2enhances its activity in formic acid decomposition.Moreover,the Pd tetrahedrons-Ti O_2hybrid structure whose Pd{111}-Ti O_2interface possesses a larger angle shows higher catalytic activity,owing to the reduced steric effect as compared to Pd octahedrons-Ti O_2.This study reveals the nature of interface effects in formic acid decomposition,and provides a guidance for the related catalyst design.     

Selective Semihydrogenation of Alkynes on Shape‐Controlled Palladium Nanocrystals

A systematic study on the selective semihydrogenation of alkynes to alkenes on shape‐controlled palladium (Pd) nanocrystals was performed. Pd nanocrystals with a cubic shape and thus exposed {100} facets were synthesized in an aqueous solution through the reduction of Na₂PdCl₄ with L ‐ascorbic acid in the presence of bromide ions. The Pd nanocubes were tested as catalysts for the semihydrogenation of various alkynes such as 5‐decyne, 2‐butyne‐1,4‐diol, and phenylacetylene. For all substrates, the Pd nanocubes exhibited higher alkene selectivity (>90 %) than a commercial Pd/C catalyst (75–90 %), which was attributed to a large adsorption energy of the carbon–carbon triple bond on the {100} facets of the Pd nanocubes. Our approach based on the shape control of Pd nanocrystals offers a simple and effective route to the development of a highly selective catalyst for alkyne semihydrogenation.     

Synthesis of palladium concave Nanocubes with high‐index facets and their catalytic properties

Palladium nanocrystals with a variety of shapes have received particular interest in recent years due to their unique properties in catalysis. Herein, Pd concave nanocubes with high‐index facets (Pd‐CNs) was synthesized by a simple water‐based route without seeds using L‐ascorbic acid (AA) as the reduction agent in the presence of CTAB. X‐ray diffraction and transmission electron microscopy were employed to demonstrate the formation of concave structures with high‐index facets of the Pd‐CNs with an average size of 17.5 nm. The as‐prepared Pd‐CNs presented significantly higher catalytic activity than commercial Pd/C (an average particle size of 4.7 nm) in the electro‐oxidation of methanol, but exhibited weaker property in Suzuki coupling reaction, which provided an evidence for the effect of shape and size on different reactions.