六氢茚满催化开环: 氢解和阳离子反应路径(英文)

Perhydroindan(bicyclo[4.3.0]nonane) was converted in a flow-type apparatus under a hydrogen pressure of 5 MPa on six different catalysts,namely on a bifunctional Pd/Na,H-Beta zeolite,on Ir/Na,H-Y and Pt/Na,H-Y zeolites with a low concentration of Br?nsted acid sites,and on three catalysts containing the three noble metals on the non-acidic support silica.On the bifunctional zeolite Pd/Na,H-Beta,skeletal isomerization of perhydroindan was the primary reaction followed by opening of one naphthenic ring,the formation of open-chain nonanes in low yields of ca.6%,and hydrocracked products C8-.The carbon number distribution of the latter was volcano-shaped with no C1,C2,C7,and C8 indicating a carbocationic hydrocracking of C9 precursors with one naphthenic ring.On Ir/Na,H-Y and Pt/Na,H-Y("high-performance ring-opening catalysts"),ring opening and hydrocracking to C8-occurred by hydrogenolysis on the respective metal.Opening of the five-membered ring was found to be much faster than opening of the six-membered ring,in agreement with literature reports.The maximal selectivities of open-chain nonanes(OCNs) attained on Ir/Na,H-Y and Pt/Na,H-Y were very high,viz.49% and 54%,respectively,and significantly better than those of the open-chain decanes observed previously with decalin as model hydrocarbon.The OCNs formed on Pt/Na,H-Y were much less branched than those formed on Ir/Na,H-Y which was interpreted in terms of the different hydrogenolysis mechanisms on both metals.Valuable ancillary mechanistic information was obtained from the selectivities of perhydroindan hydroconversion on the three noble metals on silica.In contrast to Pd/silica,Ir/silica and Pt/silica gave appreciable selectivities of OCNs as well,yet the maximum values of these selectivities were lower than those obtained on the two high-performance zeolite catalysts.     

含骨架铁ZSM-5的合成及其负载Pt催化剂在正十二烷脱氢反应中的催化性能

采用水热合成法使铁进入分子筛MFI骨架结构,成功合成出含骨架铁的分子筛Na-[Fe]-ZSM-5,并通过离子交换法负载Pt制备脱氢催化剂Pt/Na-[Fe]-ZSM-5。通过正十二烷脱氢反应,研究了该催化剂对长链烷烃脱氢制单烯烃反应的催化性能。采用N2吸附-脱附测试、X射线衍射(XRD)、傅立叶变换红外光谱(FT-IR)、氨气程序升温脱附(NH3-TPD)、吡啶吸附的红外光谱(Py-IR)、CO化学吸附、透射电子显微镜(TEM)等不同方法对催化剂进行了表征。结果表明,通过控制骨架铁含量可调控催化剂表面酸性;含骨架铁的ZSM-5分子筛载体具有抑制负载金属晶粒长大,保持金属高分散度的作用;其负载铂催化剂Pt/Na-[Fe]ZSM-5-50具有表面弱酸中心(0.69 mmol·g^-1)和高分散Pt中心,因而具有良好的长链烷烃脱氢活性、稳定性和单烯烃选择;在转化率稳定在~20%时,TOF为4.56 s^-1,单烯烃选择性为92.7%;在实验范围内,Pt/Na-[Fe]ZSM-5催化剂表面弱酸量和脱氢反应的本征活性(TOF)均随催化剂铁含量的增加而增加。     

载体硫酸化对柴油机尾气催化剂Pt/Ce-Zr活性和稳定性的影响

近年来,随着大气环境污染问题日益严重,汽车尾气排放受到政府越来越严苛的控制.柴油车排气成分主要包括碳氢化合物(HC)、一氧化碳(CO)、氮氧化物(NOx)、微粒(PM)和二氧化硫(SO2),因此常用的尾气后处理系统有颗粒捕获器(DPF)、氧化型催化转换器(DOC)以及NOx选择还原系统(SCR),在处理尾气时三者联合使用.其中柴油机氧化型催化剂(DOC)是汽车尾气后处理装置的重要组成部分,主要用于氧化CO,HC和NO,可以将CO和HC氧化成无害的CO2和H2O,将NO氧化成NO2,为后续SCR反应提供条件.柴油机排气温度一般较低(150?400°C),特别是在冷启动阶段,排气温度可降低到100°C左右,要求催化剂具有良好的低温催化活性.此外,由于柴油中存在少量含硫有机化合物,经过燃烧分解,使得柴油机尾气中含有少量SO2,对催化剂又有钝化作用,因此催化剂的抗硫性也是需要关注的重点.本文采用浸渍法制备Pt/Ce-Zr-SO42?催化剂,考察了催化剂载体硫酸化以及Pt和H2SO4的负载顺序对催化剂催化氧化C3H6和CO的活性及抗硫性的影响,并且对Pt/Ce-Zr-SO42?催化剂进行了一系列表征,探究其物理化学性质.结果表明,SO42?的添加能有效提高催化剂活性.Pt/CZ-10S对C3H6和CO的T90(转化率为90%时的温度)相较于Pt/CZ催化剂降低了约75°C,另外,Pt/CZ-10S催化剂也表现出较好的抗硫稳定性,在含硫尾气中240°C反应20 h后,其对C3H6和CO的转化率仍保持在95%以上.CO-TPD和XPS分析结果显示,Ce-Zr-SO42?载体上Pt的分散度增加,增加的Pt颗粒可以产生更多新的活性位点(Pt&+-(SO42?)&?couples),从而表现出优异的催化活性.此外,硫酸化后催化剂表面酸性的变化也是其抗硫性能提高的原因.     

酸性Al2O3层包裹Pt纳米颗粒:增强的金属-酸性双功能协同效应提高其甘油氢解反应催化性能

同时含有金属和酸性位点的双功能催化剂已广泛用于石油加氢裂解和可再生生物质转化中.这两种位点之间的距离对双功能协同作用起着至关重要的作用,进而影响催化剂的活性与选择性.近年来,由生物质转化生产生物燃料和化学品得到了广泛的关注.相比于石油裂解工艺,金属-酸性位点临近效应在生物质转化反应中鲜有报道.甘油是来自生物柴油生产过程中的廉价副产物(约总产量的10%).通过选择性氢解将其转化为具有高附加价值的化学品如1,2-丙二醇和1,3-丙二醇,这是提高其附加值的主要途径.甘油氢解包含脱水与加氢两个过程,分别发生于酸性位点与金属位点上.根据文献报道,Lewis酸位点倾向于进攻甘油端位的羟基,生成中间产物丙酮醇,而Br?nsted酸则更易进攻甘油中间位的羟基产生3-羟基丙醛;随后两者进一步加氢分别生成1,2-丙二醇和1,3-丙二醇.负载型金属催化剂广泛应用于甘油氢解反应中,在金属催化剂中添加酸性助剂能显著提高催化剂的活性.大量研究表明,无论是将酸性物种添加到金属颗粒表面或者是载体上甚至是简单的物理混合,均能有效提升催化剂的催化性能.然而据我们所知,金属-酸性位点之间的临近效应还未在甘油氢解反应中报道过.本文利用原子层沉积技术(ALD)在Pt/Al2O3催化剂表面精确沉积了一层酸性多孔的氧化铝包裹层,同时提高了Pt催化剂的活性与1,2-丙二醇选择性;我们进一步通过高分辨透射电镜(HRTEM)、一氧化碳吸附漫反射红外光谱(CO DRIFTS)、吡啶DRIFTS等手段研究了Al2O3包裹层造成催化活性提升的原因.30个ALD周期氧化铝包裹后的催化剂具有最高的活性与选择性,HRTEM观测到催化剂中的Pt纳米颗粒的尺寸为7 nm,氧化铝包裹层厚度为3.6 nm.与未包裹的Pt/Al2O3催化剂相比,沉积在Pt纳米颗粒上的酸性Al2O3与Pt颗粒形成更多的金属-酸性位点界面,从而提升了Pt与Al2O3酸性位点的亲密性.由于生长的氧化铝薄膜与载体氧化铝为相同物种,因此催化剂包裹前后总体的酸度并未发生明显改变,与吡啶化学吸附实验结果相一致.TEM测试发现,氧化铝包裹层在催化反应测试后会发生部分脱落.CO DRIFTS结果同样表明,随着反应时间的增加,Pt上CO的吸收峰逐渐增强,再次证实了Pt颗粒表面包裹层的脱落;但还发现一个位于1963 cm?1的新CO吸附峰.该峰可归属于吸附于Pt与Al2O3包裹层界面的桥式CO.此外,我们对其丙酮醇中间产物做了加氢反应的对比实验.结果表明Al2O3包裹层对Pt的加氢性能并未增加,说明甘油氢解反应的速控步骤是脱水.因此,我们初步认为,Al2O3包裹对甘油氢解反应活性的提高是通过其酸性而促进甘油脱水反应所致.我们还研究了Pt尺寸效应对甘油氢解反应的影响,发现小颗粒Pt对1,2-丙二醇的选择性比大颗粒更高,而活性更低,这表明甘油氢解是一个结构敏感反应.因此,Al2O3包裹层对1,2-丙二醇选择性的提高可能是由于几何效应造成的,Pt颗粒表面被Al2O3包裹层分割为许多Pt聚集体,类似于减小颗粒尺寸,从而提高了反应选择性.     

Cyclohexene Reactivity Using Catalysts Containing Pt,Re and PtRe Supported on Na‐ and H‐Mordenite

The reactivity of cyclohexene (CHE) over catalysts containing 0.3 wt% Pt, 0.3 wt% Re or 0.3 wt% Pt + 0.3 wt% Re supported on Na‐ and H‐mordenite has been studied in an atmospheric flow‐type reactor at a temperature range of 100–400 °C, using a flow of hydrogen (20 cm³/min). The catalysts were characterized for acid sites strength‐distribution, using desorption of ammonia in DSC. The acidity of H‐mordenite (HM) is attributed to strong acid sites, whereas the acidity of Na‐mordenite (NaM) is due to weak acid sites which are not involved in the catalytic reaction under study. The catalysts containing HM enhance the reactivity of CHE for isomorization reactions. However, the reactivity of CHE on NaM catalysts enhances only the hydrogenation and dehydrogenation reactions. Pt/HM is the most selective catalyst for isomerization of CHE, whereas Pt/NaM and PtRe/NaM catalysts are the most selective for hydrogenation and dehydrogenation reactions, respectively. The hydroisomorization of CHE seems to depend only on the acidity of the catalysts, whereas both hydrogenation and dehydrogenation reactions were controlled by metallic function of the catalysts.     

酸、盐处理对Pt/SAPO-11物化及其催化性能的影响

采用不同酸和盐浸渍处理SAPO-11分子筛,然后负载Pt制成改性的Pt/SAPO-11催化剂,用XRF、XRD、N_2吸附-脱附、SEM、NH_3-TPD和Py-IR对催化剂进行表征,分析其物理化学性能。结果表明,酸和盐处理没有破坏SAPO-11的骨架结构,还提高了催化剂的孔容、孔径、比表面积等性质,催化剂的酸性、酸量也明显发生了改变。在固定床反应器中,评价了改性的Pt/SAPO-11催化小桐子油一步加氢制异构烷烃性能;结合催化剂表征数据表明,颗粒粒径、比表面积、孔径、酸性和酸量影响催化剂的活性及产物分布。对比发现,经0.5 mol/L柠檬酸处理的Pt/SAPO-11催化剂孔径大小、酸性、B酸和L酸量分布合适,因此,一步加氢催化处理小桐子油性能优异;其中,生物航油组分(C_(8-16))的收率为32.47%,异构烷烃(C8-16)选择性为53.13%。     

PtSnNa/SUZ-4:丙烷脱氢反应的高效催化剂

丙烷脱氢制丙烯是优化利用炼厂气和油田伴生气资源的一条重要途径.随着丙烯需求量的逐步增加,丙烷脱氢制丙烯日益受到重视.负载型PtSn/γ-Al2O3催化剂具有优良的丙烷脱氢活性和选择性,但在高温、低氢压的反应条件下,催化剂易积炭而失活.近年来,选用了微孔分子筛如ZSM-5和介孔分子筛如SBA-15和MCM-41作为PtSn催化剂的载体,结果表明,具有规整孔道结构的负载型PtSn/分子筛催化剂的丙烷脱氢反应稳定性明显优于PtSn/γ-Al2O3催化剂.SUZ-4分子筛与ZSM-5分子筛结构相似且孔径相当,所不同的是ZSM-5由十元环交叉孔道组成,而SUZ-4由十元环和八元环孔道垂直相交组成.我们用微型催化反应装置结合XRD、BET比表面积和孔体积测试、NH3吸附-程序升温脱附(NH3-TPD)、氢化学吸附、热重分析(TG)、H2程序升温还原(H2-TPR)和程序升温氧化(TPO)等多种物理化学手段研究了负载型PtSnNa/SUZ-4和PtSnNa/ZSM-5催化剂的结构和丙烷脱氢反应性能,以及这两种催化剂在丙烷脱氢反应中催化性能差异的原因.实验结果显示,在丙烷脱氢反应中,负载型PtSnNa/SUZ-4催化剂上丙烯选择性和反应稳定性明显优于PtSnNa/ZSM-5催化剂,说明载体一定程度上会影响催化剂上丙烷脱氢反应性能.XRD,BET比表面积和孔体积测试等表征手段结果表明,SUZ-4和ZSM-5的孔体积和比表面积比较接近,载体的结构又类似,且两者的积碳量也相近,故载体的基本性质和积碳量的差异不是引起催化剂性能差异的原因.NH3-TPD结果表明,H-SUZ-4的酸强度明显强于H-ZSM-5.由于浸渍法制备负载型PtSn催化剂所用前体为具有强酸性的混合溶液(H2PtCl6+SnCl4),存在于SUZ-4分子筛孔道内表面的强酸中心不利于上述前体与SUZ-4分子筛孔道内表面结合.ZSM-5分子筛孔道内表面比较弱的强酸中心,促进了催化剂前体在ZSM-5分子筛孔道内表面的分散与结合.和ZSM-5为载体的催化剂相比,PtSnNa/SUZ-4上Pt粒子大部分分散在载体的外表面,从而金属上的积碳不易引起催化剂的失活.故多孔材料上Pt的分布是影响催化活性差异的主要原因.为进一步证明多孔材料上Pt的分布是影响催化活性差异的主要原因,我们通过二苯并噻吩预处理催化剂的手段证明Pt粒子在分子筛孔内外的分布情况.由于二苯并噻吩的尺寸比较大(0.8 nm)不能进入到分子筛的孔道内(SUZ-4:0.56 nm,ZSM-5:0.56 nm),所以载体孔道外的部分Pt会被二苯并噻吩预处理而失去活性,而孔道内的Pt不会因为预处理仍具有催化活性.实验结果表明,PtSnNa/SUZ-4经过二苯并噻吩预处理后,催化活性大大降低;而PtSnNa/ZSM-5经过二苯并噻吩预处理后,催化活性几乎没有变化.说明PtSnNa/SUZ-4上Pt粒子大部分分散在载体的外表面,从而金属上的积碳不易引起催化剂的失活.     

B修饰的ZrO2及其制备p H值对PtSn/B-ZrO2丙烷脱氢反应性能的影响（英文）

丙烯作为一种重要的石油化工基础原料,传统上是从石脑油蒸汽裂解或催化裂化过程中作为副产物生产的.随着原油的枯竭和页岩气开发技术的成熟,通过乙烷蒸汽裂解制备乙烯更具吸引力并已得到广泛的工业应用,但该路线乙烯选择性高,而副产物丙烯数量有限.为满足不断增加的丙烯需求量,利用油田气和页岩气中低附加值的丙烷为原料,将其直接脱氢制丙烯(PDH)具有重要的现实意义.目前已开发成功的PDH技术采用的催化剂主要为负载PtSn型催化剂和Cr基催化剂.其中,Pt基催化剂较Cr基催化剂更加环境友好,因此得到了更广泛的应用.由于Pt元素的昂贵和稀有,制备低Pt含量和良好性能的催化剂极具吸引力.UOP Oleflex工艺开发的最新一代催化剂DEH-16仅含有0.3 wt%Pt,相对于前一代催化剂Pt含量降低30%.然而,许多文献报道,随着Pt含量的降低,催化剂的稳定性很容易恶化,降低Pt含量并保持催化剂性能仍具有一定的挑战.研究表明,含有更多Lewis酸性位点和更少Bronsted酸位点的催化剂显示出较好的丙烷脱氢活性和丙烯选择性.此外,源自缺陷位或配位不饱和位的Lewis酸性位也可为负载的金属颗粒提供锚定位点.BASF对ZrO2作为载体的丙烷脱氢催化剂进行了广泛研究,但其催化剂尚未完全商业化.有文献报道,ZrO2负载的PtSn催化剂在脱氢反应中的稳定性较差.将元素硼(B)加入到ZrO2中可以极大地抑制Bronsted酸性而提高Lewis酸量和酸强度,因此我们推测含有适量配位不饱和Zr位点的ZrO2作为PtSn丙烷脱氢催化剂载体可能具有优异的性能.载体的合成pH值对催化剂PDH性能也会有影响.然而,目前还没有硼改性的ZrO2(B-ZrO2)合成pH值对PDH催化性能影响的研究.本文研究了B-ZrO2的合成pH值(9,10和11)对PtSn/B-ZrO2在丙烷脱氢反应中催化性能的影响.Py-IR结果表明各pH值下合成的B-ZrO2均只有Lewis酸,NH3-TPD结果则表明B-ZrO2的Lewis酸量和强度随合成pH值的增加而增加.XPS结果显示,载体对Pt和Sn电子性质的影响不容忽视.由于OSC与CO氧化活性之间没有线性关系,因此Pt和Sn之间的相互作用程度在CO氧化反应中可能起主要作用,并有如下递增趋势:PtSn/B-ZrO2-9相似文献   

One-step conversion of n-butane to isobutene over H-beta supported Pt and Pt,M (M = Cu, In, Sn) catalysts: An investigation on the role of the second metal

The one-step transformation of n-butane to isobutene was studied over H-beta zeolite supported Pt and Pt,M (M = Cu, In, Sn) catalysts. Catalytic performance of monometallic Pt/H-beta samples resulted to be affected by the support acidity, a lower number of acid sites leading to higher iso- and n-butenes selectivities and lower by-products formation. Addition of Cu, In or Sn to Pt enhanced both isobutene and n-butenes selectivities, which were in the order: Pt,In > Pt,Sn  Pt,Cu > Pt. All Pt,M samples exhibited also a higher stability than the corresponding monometallic Pt samples, the sequence of deactivation rates being: Pt > In,Pt > Cu,Pt ≈ Sn,Pt. On the basis of characterization results it was stated that the addition of Cu, In or Sn to Pt affects the n-butane dehydroisomerization modifying both the surface structure of Pt clusters and the support acidity. In particular the observed order of isobutene selectivity was related to the degree of Pt–M interaction leading to a dilution of Pt clusters, which inhibits hydrogenolysis reactions and enhances dehydrogenation processes. The decrease in the number of acid sites caused by addition of the second metal was instead accounted for the improved resistance to deactivation of Pt,M catalysts.     

棒状CeO_2负载Pt催化剂的合成及其电化学性能研究

通过水热法合成棒状纳米Ce O2(Ce O2-R),并将Pt纳米颗粒负载于Ce O2表面,制得甲醇燃料电池的阳极催化剂Pt/Ce O2-R.通过结构与形貌表征,结果表明,Pt/Ce O2-R中Ce O2的暴露晶面为(111)和(002)晶面,改变了Pt周围的电子结构,进而降低了Pt-COads的键能,释放出更多的活性位.另外,Pt纳米颗粒在Ce O2-R表面分散更均匀.利用电化学工作站测试阳极催化剂Pt/Ce O2-R在酸性溶液中的电化学性能,证明Pt/Ce O2-R催化剂的甲醇电氧化性能与抗CO毒害能力较颗粒状Ce O2负载Pt催化剂(Pt/Ce O2-P)都有很大的提高,证明Ce O2-R作为Pt纳米颗粒的载体用于直接甲醇燃料电池的阳极反应具有发展潜力.     

四氢萘的加氢与选择性开环

对环境的越来越多的关注，直接导致了燃料油的标准变得越来越严格．柴油中太高含量的芳香烃（尤其是多环芳烃）将导致其密度增大，颜色变暗，尾气中颗粒含量上升，燃烧性能下降．通过传统的深度加氢装置使芳香烃达到饱和也不能有效的提高十六烷值（因为深度加氢的产物-环烷烃同样具有较低的十六烷值）．而环烷烃的开环产物（烷基苯、烷基环己烷、烷基环戊烷、烷烃等）却具有相对较高的十六烷值，这就使得芳香烃饱和加氢后所得环烷烃的进一步开环变得重要起来。     

金属前躯体溶剂对Pt/ZSM-22催化剂临氢异构性能的影响

将Pt前驱体分别溶解于水、乙醇、丙酮、乙酸中,采用浸渍法制备了一系列成型Pt/ZSM-22催化剂。通过XRD、BET、TEM、CO-chemisorption、CO-FTIR和Py-FTIR等表征手段对催化剂的物相结构、织构性质、金属性质和酸性进行了系统地考察并以正十二烷为模型化合物,研究了前躯体溶剂对临氢异构反应性能的影响。结果表明,溶剂极性是造成Pt分散差异的主要原因;以乙醇、丙酮和乙酸为浸渍溶剂制备的催化剂,Pt多分布于ZSM-22分子筛上,并与酸性位相互作用造成Pt缺电子;而以水为溶剂则造成Pt多分布于氧化铝黏结剂上,对Pt的电子性质影响较小。在临氢异构反应中,与Pt落位于氧化铝相比,Pt分布于ZSM-22分子筛上表现出更高的活性和异构选择性,表明缩短酸性位与金属位间距可使反应物和异构中间体迅速扩散至金属位上发生脱氢和加氢反应。     

Reaction mechanism-based design of efficient VPO catalysts for <Emphasis Type="Italic">n</Emphasis>-C<Subscript>5</Subscript>H<Subscript>12</Subscript> oxidation into phthalic,maleic, and citraconic anhydrides

Hypotheses as to possible ways of enhancing the selectivity of partial n-pentane oxidation with respect to phthalic, maleic, and citraconic anhydrides are suggested based on the mechanistic concepts of the formation of these products. The hypotheses are checked by studying the properties of vanadium-phosphorus oxide (VPO) catalysts upon the introduction of different concentrations of La, Bi, Fe, W, Te, Ti, Zr, or Mo. It is shown by various physicochemical methods (x-ray diffraction, IR spectroscopy, X-ray photoelectron spectroscopy, and pyridine and 2,6-dimethylpyridine adsorption) that the phase composition of the VPO catalyst and the oxidation states of its elements on the surface are not changed in most cases upon the introduction of these additives. The additives mainly affect the number of Lewis acid sites, whereas the Brønsted acidity changes only slightly. The existence of a correlation between the citraconic anhydride selectivity and the total acidity of the modified catalyst surface is confirmed. In agreement with the assumptions as to the process selectivity, it was discovered that the phthalic anhydride selectivity increases with an increase in the number of Lewis acid sites. The observed regularities open up the way to the purposeful synthesis of catalysts with enhanced selectivity with respect to these products.     

Study of methanol and isobutanol coupling over acid catalysts

The coupling of methanol and isobutanol was carried out over selected acid catalysts. An amorphous silica-alumina, a zeolite and aluminas were tested as catalysts of the coupling. The correlation between the catalysts acidity and their activity and selectivity was studied. The catalytic tests were carried out in a fixed-bed flow microreactor working on line with a gas-chromatograph. The acidic properties of the catalysts were followed by IR studies of pyridine adsorption. The results obtained proved that the strength and the concentration of acid sites on the catalysts surface effected the alcohols conversion to ethers. It was found that the undesirable dehydration of isobutanol to isobutene was catalyzed by stronger acid sites than those required for the etherification reaction. This revised version was published online in June 2006 with corrections to the Cover Date.     

Zr-Al 复合氧化物负载 Pt 催化甘油氢解制正丙醇

近年来, 甘油氢解的研究主要集中在生成 1,2-丙二醇和1,3-丙二醇二元醇. 与二元醇相比, 正丙醇也是一种昂贵的化学品, 用过量的甘油直接氢解合成高选择性的正丙醇将是一个非常好的生产途径. 因为铂金属具有较强的断 C-O 键的能力, 所以甘油氢解制正丙醇的催化剂主要采用铂作为活性组分. 本文以铂为活性组分, 采用浸渍法将其负载到不同 Zr/Al比的 Zr-Al 复合氧化物上制得 2.5%Pt/ZrxAl1-xOy催化剂, 并将其应用到甘油氢解反应中, 探讨了 Zr/Al 比对甘油氢解制正丙醇反应性能的影响.表征结果发现, 锆铝混合氧化物经过 400 ℃ 焙烧后为无定形态的复合金属氧化物, 载体中无单相氧化锆或氧化铝存在. 随着锆含量增加, 催化剂酸性位点向强酸方向移动. 不同 Zr/Al 比的锆铝混合氧化物负载铂催化剂的评价结果发现, 甘油转化率随催化剂中铝含量增加而增大; 锆铝比大于 5:5 时, 丙醇 (正丙醇+异丙醇) 的选择性很高, 普遍大于 87%; 锆铝比至 7:3 时, 正丙醇选择性最高. 通过 X 射线衍射、CO 化学吸附、H2程序升温还原、吡啶吸附、氨气程序升温脱附等方法对催化剂进行了表征, 发现随着锆铝混合氧化物中锆含量的增加, 催化剂的酸性位点向强酸方向移动, 调变 Zr/Al 比促进了铂颗粒的分散, 实现了催化剂表面酸量和强酸位点的定向调控. 当锆铝比增加至 7:3 时, 催化剂的强酸位点占总酸含量的91.2%. 对比催化剂酸性分析和反应结果可知, 催化剂表面的总酸含量高有助于甘油转化; 强酸位点有助于甘油深度脱水生成丙醇; 正丙醇的选择性则可能与 NH3脱附温度在 580 ℃ 处的强酸位和较大的 Pt 颗粒有关. 当 Zr/Al 比为 7:3 时, 催化剂表面强酸位点占 91.2%, 而强酸位点的增加有助于甘油的深度脱水形成正丙醇. 因此, 以 10% 甘油水溶液为原料, 在240 ℃和6.0 MPa 初始氢气压力条件下反应 8 h, 甘油转化率和正丙醇的选择性分别达到 81.2% 和 86.3%. 催化剂经过 5 次循环使用后, 甘油转化率和丙醇 (正丙醇+异丙醇) 选择性几乎不变, 但正丙醇的选择性略有降低. 使用 5 次后的催化剂表面的总酸量变化不大, 但酸分布变化较大, 即强酸比例下降. 可见, 催化剂活性变化小是由于其表面酸量变化不大, 而正丙醇选择性下降与强酸位点比例下降有关.     

Acidic Properties of Sulfated Zirconia

IR spectroscopy of adsorbed probe molecules (CO, pyridine) is used to characterize the acidic properties of sulfated zirconia derived from zirconium oxide and hydroxide. Their acidic properties are found to be similar. The strength of the Lewis and Brönsted site measured by the frequency shift of adsorbed CO is lower than that in zeolites. It is concluded that sulfated zirconia have no superacid Brönsted and Lewis sites. Brönsted sites capable of protonating pyridine vanish when calcining the catalysts at temperature above 773 K, but the strength and concentration of the Lewis acid sites (LAS) do not change.     

单斜及四方晶相ZrO2催化CO加氢反应性能的比较

研究了以纯单斜（ｍ）和四方（ｔ）晶相ＺｒＯ２为催化剂的ＣＯ加氢反应．尽管两种晶相催化剂均有较高的低碳烯烃的选择性,但是也发现了两者催化性能的显著差别．ｍ－ＺｒＯ２催化剂对异丁烯有突出的选择性,而ｔ－ＺｒＯ２催化剂,则只有乙烯和丙烯,几乎没有Ｃ４烯烃的选择性．室温下ＣＯ吸附的原位ＩＲ谱测试可见,只有在ｔ－ＺｒＯ２催化剂上观测到不可逆含氧吸附物种．吡啶吸附的Ｒａｍａｎ谱显示出它们之间表面性质的差别,ｍ－ＺｒＯ２催化剂表面存在等强度的Ｌｅｗｉｓ和Ｂｒｏｎｓｔｅｄ酸中心,而在ｔ－ＺｒＯ２催化剂表面几乎只有Ｂｒｏｎｓｔｅｄ酸中心．催化过程的一些模型分子电子结构计算也表明了ＺｒＯ２催化剂对低碳烯烃选择性内在的电子结构条件．我们推测ＣＯ在ｍ－ＺｒＯ２催化剂表面的孪式吸附物种可能是导致异丁烯产物的根源     

不同金属改性对Pt/β-分子筛催化柴油车尾气中HC、CO及SO_2氧化性能的影响

采用共浸渍法制备了Ce、Cr、Mo和Cu改性的Pt/β-分子筛催化剂,运用氮吸附、XRD、H_2-TPR、NH_3-TPD和XPS等手段对该催化剂进行了表征,研究了不同金属改性对催化剂的织构性质、骨架结构、表面酸性以及在模拟柴油车尾气中抑制SO_2氧化性能和催化HC、CO氧化活性的影响。结果表明,金属改性对催化剂织构性能和骨架结构影响较小。Cr、Mo和Cu的添加可以调变催化剂酸强度,进而抑制SO_2的氧化;Cu改性的催化剂具有最好的抑制SO_2氧化的能力,在350和450℃条件下,与未改性Pt/β-分子筛催化剂相比,Cu改性催化剂上SO_2转化率分别下降了70.4%和70.2%。然而,改性金属与Pt物种之间产生的相互作用,会使Pt物种更难还原,导致Pt对HC和CO氧化的催化活性降低。     

Highly active and reusable catalyst for fries rearrangement of phenyl acetate

Silica-12-tungstophosphoric acid core-shell nanoparticles were prepared by sol-gel method followed by steaming. The catalytic activity of fresh and steamed catalysts was studied in Fries rearrangement of phenyl acetate. The reaction parameters, such as catalyst loading and reaction temperature, were optimized. The structural properties of the prepared catalysts were analyzed by X-ray diffraction and transmission electron microscopy techniques. The nature and strength of acid sites in the catalysts were analyzed by pyridine adsorption followed by infrared spectroscopy and differential scanning calorimetry measurements. The XRD and TEM analyses confirm the formation of silica-12-tungstophosphoric acid core-shell nanoparticles during steaming process. Acidity measurement indicates that both fresh and steamed catalyst samples carry weak acid sites and Brøsted acid sites. In addition, the steaming of heteropoly acid contained silica enhances the strength of Brøsted acid sites. The catalytic activity of fresh as well as steamed catalysts in liquid-phase Fries rearrangement showed that the steam treated sample exhibits higher conversion and selectivity to the desired product compared to the fresh catalyst sample. The higher activity of steam treated catalysts has been explained in terms of surface acidity of the catalysts. Reusability of the steamed catalyst shows that there is no appreciable change either in the conversion rate or product selectivity.     

十氢萘在分子筛催化剂上的开环反应研究

在小型固定流化床(FFB)装置中研究了Y分子筛与ZSM-5分子筛催化剂上的十氢萘裂化开环反应性能,考察了温度和剂油比对Y分子筛开环反应催化性能的影响。结果表明,十氢萘在分子筛催化剂上通过环烷环开环反应生成丙烷、丙烯、丁烷、丁烯、甲基戊烷和环戊烷、环己烷等非芳烃以及苯、C_1~4烷基取代苯等单环芳烃,并通过脱氢缩合反应生成四氢萘、萘、甲基萘和菲、芘等多环芳烃甚至焦炭等。由于扩散和吸附性能的影响,ZSM-5分子筛催化剂的裂化开环反应选择性比Y分子筛催化剂的高,因此,十氢萘环烷环开环与脱氢缩合反应的相对比例(NRO/DHC)在ZSM-5分子筛催化剂上较高。在Y分子筛催化剂上,温度为450~550 ℃、剂油比为3~9,反应温度升高或者剂油比增加,双分子氢转移以及脱氢缩合反应增强,从而导致环烷环开环产物选择性降低。