Importance of Size and Distribution of Ni Nanoparticles for the Hydrodeoxygenation of Microalgae Oil

Improved synthetic approaches for preparing small‐sized Ni nanoparticles (d=3 nm) supported on HBEA zeolite have been explored and compared with the traditional impregnation method. The formation of surface nickel silicate/aluminate involved in the two precipitation processes are inferred to lead to the stronger interaction between the metal and the support. The lower Brønsted acid concentrations of these two Ni/HBEA catalysts compared with the parent zeolite caused by the partial exchange of Brønsted acid sites by Ni²⁺ cations do not influence the hydrodeoxygenation rates, but alter the product selectivity. Higher initial rates and higher stability have been achieved with these optimized catalysts for the hydrodeoxygenation of stearic acid and microalgae oil. Small metal particles facilitate high initial catalytic activity in the fresh sample and size uniformity ensures high catalyst stability.     

Effect of Brønsted/Lewis Acid Ratio on Conversion of Sugars to 5‐Hydroxymethylfurfural over Mesoporous Nb and Nb‐W Oxides

A series of mesoporous Nb and Nb‐W oxides were employed as highly active solid acid catalysts for the conversion of glucose to 5‐hydroxymethylfurfural (HMF ). The results of solid state ³¹P MAS NMR spectroscopy with adsorbed trimethylphosphine as probe molecule show that the addition of W in niobium oxide increases the number of Brønsted acid sites and decreases the number of Lewis acid sites. The catalytic performance for Nb‐W oxides varied with the ratio of Brønsted to Lewis acid sites and high glucose conversion was observed over Nb₅W₅ and Nb₇W₃ oxides with high ratios of Brønsted to Lewis acid sites. All Nb‐W oxides show a relatively high selectivity of HMF , whereas no HMF forms over sulfuric acid due to its pure Brønsted acidity. The results indicate fast isomerization of glucose to fructose over Lewis acid sites followed by dehydration of fructose to HMF over Brønsted acid sites. Moreover, comparing to the reaction occurred in aqueous media, the 2‐butanol/H₂O system enhances the HMF selectivity and stabilizes the activity of the catalysts which gives the highest HMF selectivity of 52% over Nb₇W₃ oxide. The 2‐butanol/H₂O catalytic system can also be employed in conversion of sucrose, achieving HMF selectivity of 46% over Nb₅W₅ oxide.     

Impacts of Composition and Post‐Treatment on the Brønsted Acidity of Steam‐Treated Faujasite: Insights from FTIR Spectroscopy

A detailed FTIR study of the effects of steaming and acid leaching on protonated Y faujasite (FAU) and EMT zeolites is provided and the results are thoroughly analysed. In particular, emphasis is placed on the Brønsted acidic evolution and acidic strength measurements for a large series of as‐modified zeolites using CO as a sensitive probe to distinguish various protonic sites. While an increase of acidity for framework OH groups is observed during the strengthening of dealumination for both FAU and EMT series, the steaming process also generates a large variety of additional Brønsted acidic groups. Regarding acidic strength, these heterogeneous OH groups are sensitive to post‐treatments and their existence strongly depends on the initial composition of the zeolites. The presence of residual Na⁺ cations in the starting materials induces dramatic Brønsted acidic changes after steaming. As a result, steamed zeolites that initially contain traces of sodium possess unusual acidic Brønsted groups with low acidity. This result contradicts the trend generally observed with framework OH groups, for which steaming results in an increase of Brønsted acidic strength. The study reveals that the situation is indeed more complex, as some compositions and post‐treatments strongly influence the Brønsted acidity of as‐steamed zeolites both in their nature and their corresponding acidic strength. By linking these IR‐compiled features to the as‐exposed modifications, a large acidity scale better suited to characterizing catalysts having Brønsted acidity expanding from lowest to highest strength is proposed.     

Synthesis of Novel Chiral Phosphoric Acid‐Bearing Two Acidic Phenolic Hydroxyl Groups and its Catalytic Evaluation for Enantioselective Friedel‐Crafts Alkylation of Indoles and Enones

A novel chiral phosphoric acid catalyst bearing two acidic phenolic hydroxyl groups was synthesized. Its catalytic activity as a chiral Brøsted acid has been examined in the enantioselective Friedel‐Crafts alkylation of indoles and enones as a model reaction. In comparison with the other chiral phosphoric acid catalysts, the reaction catalyzed by the novel chiral catalyst afforded the desired 3‐substituted indoles in a higher enantioselectivity (up to 69% ee).     

Fries Rearrangement of Phenyl Acetate over Solid Acid Catalyst

A silica-supported zirconium based solid acid (ZS) has been used as catalyst for the Fries rearrangement of phenyl acetate (PA). The catalyst showed a higher PA conversion activity and a much higher selectivity for o-hydroxyacetophenone (o-HAP) than for strongly acidic zeolite catalysts. The supported catalyst was characterized by XRD,IR,XPS,pyridine-TPD and the surface area measurements. The catalytic properties were influenced significantly by pretreatment temperature.     

水热处理对MCM-22催化剂酸性、孔结构及甲苯/甲醇烷基化性能的影响

采用XRD, NH3-TPD, IR和低温氮气吸附等方法研究了分别以纯水蒸气和质量分数为6％的氨水蒸气处理MCM-22分子筛催化剂后, 其酸性和孔结构的变化, 并以甲苯、甲醇烷基化为探针反应考察了催化剂的催化性能. 研究结果表明, 在两种不同介质中和处理温度不高于400 ℃条件下, 催化剂的总酸量变化不大, 强酸中心有所增加; 处理温度高于500 ℃后, 催化剂的总酸量明显下降, 强酸中心基本消失; 经水热处理后, MCM-22分子筛催化剂中形成了孔径不均匀的二次孔, 平均孔径增大. 随着处理温度的提高, 催化剂的活性降低, 对二甲苯和邻二甲苯的选择性上升. 经500 ℃纯水蒸气处理5 h的MCM-22催化剂, 具有适宜的酸强度和酸类型分布, 有利于甲苯甲醇烷基化反应的进行, 且催化剂维持了较高的催化活性并具有一定的对位选择性(甲苯转化率和对二甲苯选择性分别29.22％和42.16％).     

镁改性对HZSM-5分子筛催化乙烯制丙烯的影响

采用等体积浸渍法制备了一系列不同Mg含量(0–1.0%)的HZSM-5分子筛。利用X射线衍射(XRD)、N_2吸附/脱附、铝魔角旋转固体核磁共振(~(27)AlMASNMR)、~(29)SiMASNMR、氨-程序升温脱附(NH_3-TPD)和吡啶吸附傅里叶变换红外(Pyridine-IR)光谱等技术对改性前后样品的结构和酸性进行了详细表征,在常压连续流动固定床反应器上考察其对乙烯转化制丙烯(ETP)反应的催化性能,评价了反应条件和Mg改性的影响。结果表明,在温度为550°C、乙烯体积空速GHSV=3000 h~(-1)的适宜反应条件下,0.5%适量镁改性HZSM-5导致乙烯转化率有所下降,但丙烯选择性增加到45%以上,而副产物芳烃的选择性降到8%以下。反应前样品的酸性表征和反应后积碳样品的TPO及~(13)CCP/MASNMR谱图分析表明适量镁改性使HZSM-5分子筛的总酸量和强B酸量减少而中强酸量增加,从而提高了丙烯的选择性,但是过量的镁改性使分子筛的总酸量明显减少,导致催化剂的活性显著下降。     

Heterogeneously catalyzed efficient hydration of alkynes to ketones by tin-tungsten mixed oxides

The Sn–W mixed oxide prepared by calcination of the Sn–W mixed hydroxide precursor with a Sn/W molar ratio of 2:1 at 800 °C (SnW2‐800) acts as an efficient heterogeneous catalyst for the hydration of alkynes. Structurally diverse terminal and internal alkynes, including aromatic, aliphatic, and double‐bond‐containing ones, can be converted into the corresponding ketones in moderate to high yields. The catalytic activity of SnW2‐800 is much higher than those of previously reported heterogeneous catalysts and commonly utilized acid catalysts. The observed catalysis was truly heterogeneous, and the retrieved catalyst can be reused at least three times with retention of its high catalytic performance. The reaction rate for the SnW2‐800‐catalyzed hydration was decreased by addition of 2,6‐lutidine and the hydration hardly proceeded in the presence of an equimolar amount of this compound with respect to that of the Brønsted acid sites in SnW2‐800. Therefore, the present hydration is mainly promoted by the Brønsted acid sites in SnW2‐800.     

Phosphonate‐Modified UiO‐66 Brønsted Acid Catalyst and Its Use in Dehydra‐Decyclization of 2‐Methyltetrahydrofuran to Pentadienes

Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO₃H₂ by post‐synthesis modification. Characterization reveals that UiO‐66‐PO₃H₂ retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

Regulation of Brønsted acid sites in H-MOR for selective methyl methoxyacetate synthesis

As it is well known, Brønsted acid sites in 8-MR of H-MOR (mordenite) are selective for dimethyl ether (DME) carbonylation to methyl acetate, whereas those in 12-MR are more prone to methanol to olefin reaction. Interestingly, we observed that the Brønsted acid sites in 12-MR of H-MOR are highly active for dimethoxymethane (DMM) carbonylation to methyl methoxyacetate (MMAc), whereas those in 8-MR led to the formation of DME. A series of modified H-MOR catalysts with accurate regulation of Brønsted acid sites in 12-MR or 8-MR were successfully synthesized by selective Na⁺ exchange or pyridine (Py) adsorption. Fourier-transform infrared (FT-IR) spectra, NH₃-temperature-programmed desorption, Py-FT-IR, and inductively coupled plasma analyses suggested that Na⁺ first occupied Brønsted acid sites in 8-MR and then replaced those in 12-MR. All Na⁺-exchanged catalysts exhibited significant acceleration on MMAc selectivity, and the ratio of Brønsted acid amount in 12-MR/total had a positive correlation with MMAc selectivity. The MMAc selectivity (78%) of H-MOR-0.15Na was nearly 2.5 times more than that of untreated H-MOR (31%). However, H-MOR-Py showed almost no carbonylation activity (<1% MMAc) and a highest DME selectivity (98%), indicating that Brønsted acid sites in 12-MR were the only active sites for DMM carbonylation, whereas those in 8-MR tended to accelerate DMM disproportionation to DME.     

On the equivalence of acidic centers in H-beta zeolites tested by Fries rearrangement of phenyl acetate

The heterogeneously catalyzed liquid phase Fries rearrangement reaction of phenyl acetate was carried out on Beta zeolites reexchanged with different amounts of metal cations. The aim of this work was to determine the influence of the amount of Brønsted acid sites as the catalytic active centers on the conversion. Sodium and potassium ions as well as divalent calcium and zinc ions were used in the reexchange procedure. The conversion shows a linear dependency on the degree of ion reexchange following the theoretically expected values. So the results prove that the bridged hydroxyl groups are indeed the dominating active centers and that their strength seems to be independent of the degree of reexchange; consequently, their acidic strength should be identical. A special emphasis was placed on the reexchange with divalent metal ions. It was shown that one divalent ion is not able to replace two protons as is supposed to be necessary for the charge balance—so a 1:1 stoichiometry is needed to assume to explain the catalytic results.     

Phosphonate-Modified UiO-66 Brønsted Acid Catalyst and Its Use in Dehydra-Decyclization of 2-Methyltetrahydrofuran to Pentadienes

Phosphorus-modified all-silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well-defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO-66 topology, achieved by attaching phosphonic acid to the 1,4-benzenedicarboxylate ligand and using it to form UiO-66-PO₃H₂ by post-synthesis modification. Characterization reveals that UiO-66-PO₃H₂ retains stability similar to UiO-66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra-decyclization of 2-methyltetrahydrofuran (2-MTHF). For the later reaction, the reported catalyst exhibits site-time yields and selectivity approaching that of phosphoric acid on all-silica zeolites. Using solid-state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

Role of adsorption in zeolite-catalyzed hydrocarbon cracking reaction

The activity for hydrocarbon cracking of zeolite catalysts depends on the type of zeolite and steam treatment. By comparing the activities of different zeolites under the condition where the catalyst did not undergo deactivation and the product distributions were identical, and presumably for the monomolecular mechanism, it was found that there were no differences in the chemical properties of the active sites in the zeolites. The apparent differences in catalytic activities among zeolites could be attributed to different concentrations of adsorbed alkane reactants, which is a consequence of the different strength of interaction of the alkyl groups with the zeolite walls. The latter may also be a significant contribute to the observed different strengths of interaction of alkyl amines with the Brønsted acid sites in zeolites.     

Chiral Bisphosphoric Acids and Their Applications in Asymmetric Catalysis

Asymmetric Brønsted acid catalysis has been recognized as a powerful concept for asymmetric synthesis. In the process of pursuing more robust and highly effective chiral Brønsted acid catalysts, chiral bisphosphoric acids have received much attention in the last two decades. Their unique catalytic properties are mainly attributed to the inherent intramolecular hydrogen bonding interactions that could increase the overall acidity and tune the conformation property. Integrating hydrogen bonding into the catalyst design, quite a few structurally unique and effective bisphosphoric acids have been synthesized, which frequently exhibited superior selectivity in a broad range of asymmetric transformations. This review summarizes the status quo of chiral bisphosphoric acid catalysts and their applications in catalyzing asymmetric transformations.     

Effects of binder, coking and regeneration on acid properties of H-mordenite during TDP reaction

The effects of binder, coking and regeneration on the acid properties of H-mordenite zeolite during toluene disproportionation reaction (TDP) have been investigated by solid-state ³¹P-MAS-NMR of various adsorbed phosphorous probe molecules in conjunction with elemental analysis by ICP-MS technique. A series of fresh, spent and regenerated mordenite-based commercial catalysts were examined and the results were also compared with binder-free H-mordenite zeolite and unformulated γ-alumina binder. It is found that parent H-mordenite zeolite possessed only Brønsted acidity, which is responsible for the observed catalytic activity. In contrast, the γ-Al₂O₃ binder exhibited only Lewis acidity and plays a minor role during the catalytic reaction. While the amount of strong Brønsted acid sites decreased rapidly during initial coking, it reached a plateau at a total coke content of ca. 7 wt%, corresponding to ca. 80% decrease in total acidity. That the catalyst remained active even under deep coke deposition (>7 wt%) condition indicated catalytic activity may be invoked by subsequent coking taking place on the external surface rather than intracrystalline channels of the zeolite catalyst. Furthermore, upon catalyst regeneration treatment, ca. 75% of the total acidity could be effectively recovered.     

The effect of FER zeolite acid sites in methanol-to-dimethyl-ether catalytic dehydration

In this paper, the effect of acidity of zeolites with FER framework was studied in the methanol dehydration to dimethyl ether reaction, by comparing catalysts with different Si/Al ratios(namely 8, 30 and60). The aim of this work was to investigate how the acid sites concentration, strength, distribution and typology(Br?nsted and Lewis) affect methanol conversion, DME selectivity and coke formation. It was found that the aluminium content affects slightly acid sites strength whilst a relevant effect on acid sites concentration and distribution(Br?nsted/Lewis) was observed as 24% of Lewis sites were found on Alrichest samples, whilst less than 10% of Lewis acid sites were observed on FER at higher Si/Al ratio. All the investigated catalyst samples showed a selectivity toward DME always greater than 0.9 and samples with the lowest Si/Al ratio exhibit the best performances in terms of methanol conversion, approaching the theoretical equilibrium value(around 0.85) at temperatures below 200 °C. Turnover-frequency analysis suggests that this result seems to be related not only to the higher amount of acid sites but also that the presence of Lewis acid sites may play a significant role in converting methanol. On the other hand, the presence of Lewis acid sites, combined with a high acidity, promote the formation of by-products(mainly methane) and coke deposition during the reaction. As final evidence, all the investigated catalysts exhibit very high resistance to deactivation by coke deposition, over 60 h continuous test, and a GC–MS analysis of the coke deposited on the catalyst surface reveals tetra-methyl benzene as main component.     

The porosity, acidity, and reactivity of dealuminated zeolite ZSM-5 at the single particle level: the influence of the zeolite architecture

A combination of atomic force microscopy (AFM), high‐resolution scanning electron microscopy (HR‐SEM), focused‐ion‐beam scanning electron microscopy (FIB‐SEM), X‐ray photoelectron spectroscopy (XPS), confocal fluorescence microscopy (CFM), and UV/Vis and synchrotron‐based IR microspectroscopy was used to investigate the dealumination processes of zeolite ZSM‐5 at the individual crystal level. It was shown that steaming has a significant impact on the porosity, acidity, and reactivity of the zeolite materials. The catalytic performance, tested by the styrene oligomerization and methanol‐to‐olefin reactions, led to the conclusion that mild steaming conditions resulted in greatly enhanced acidity and reactivity of dealuminated zeolite ZSM‐5. Interestingly, only residual surface mesoporosity was generated in the mildly steamed ZSM‐5 zeolite, leading to rapid crystal coloration and coking upon catalytic testing and indicating an enhanced deactivation of the zeolites. In contrast, harsh steaming conditions generated 5–50 nm mesopores, extensively improving the accessibility of the zeolites. However, severe dealumination decreased the strength of the Brønsted acid sites, causing a depletion of the overall acidity, which resulted in a major drop in catalytic activity.     

Protonic recognition and assembly for the creation of porous Brønsted acid catalysts with enhanced catalytic efficiency

Due to the high local concentration of substrates in confined space, porous solid Brønsted acids have been extensively explored for efficient acid-catalyzed reaction. However, the porous structures with strong Brønsted acids lack long-term stability due to chemical hydrolysis. Moreover, the products inhibition effect in confined rigid cavities severely obstructs subsequent catalysis. Here, tubular Brønsted acid catalyst with unique recognition of protons was presented by self-assembly of pH-responsive aromatic amphiphiles. The responsive assembly could mechanically transfer hydrogen ions from low-concentration acidic solution into tubular defined pores, thereby producing effective catalytic activity for Mannich reactions in mildly acidic solution. Notably, the tubular catalyst unfolded into flat sheets upon addition of triethylamine for efficient release of products, which could be recovered by subsequent acidification and the catalytic activity still remained. Therefore, the porous Brønsted acid with reversible assembly provides a new strategy for mass synthesis through increasing conversion times.     

Hydroisomerization of n-heptane over bimetal-bearing H3PW12O40 catalysts supported on dealuminated USY zeolite

The bimetal-bearing (CePt or LaPt) 12-tungstophosphoric acid (H₃PW₁₂O₄₀ (PW)) catalysts supported on dealuminated USY zeolite (DUSY) were prepared by impregnation and characterized by XRD, BET, IR, and H₂-chemisorption. Their catalytic activities were tested in the hydroisomerization of n-heptane with a continuous atmospheric fixed-bed reactor. After the steam treatment combined with the acid leaching, as well as the supporting with PW and the bimetals, the DUSY support retains the Y zeolite porosity and the PW well keeps its Keggin structure in catalysts. The doping of Ce into the catalysts enhances the dispersion of Pt on the catalyst surface. The Pt-bearing PW catalysts doped with Ce or La, especially Ce, exhibit much higher catalytic activity and selectivity than the catalysts without dopants at lowered reaction temperatures. At the optimal reaction conditions, i.e., the reaction temperature of 250°C and WHSV of 1.4 h^?1, the catalyst with a Pt loading of 0.4%, PW loading of 10% and a molar ratio of Ce to Pt of 15:1 shows a conversion of n-heptane of 70.3% with a high selectivity for isomerization products of 94.1%.     

Metal-reinforced sulfonic-acid-modified zirconia for the removal of trace olefins from aromatics

Metal-reinforced sulfonic-acid-modified zirconia catalysts were successfully prepared and used to remove trace olefins from aromatics in a fixed-bed reactor. Catalysts were characterized by ICP-OES, N₂ adsorption–desorption, X-ray diffraction, thermogravimetric analysis (TGA), and pyridine-FTIR spectroscopy. Different metals and calcination temperatures had great influence on the catalytic activity. Alumina-reinforced sulfated zirconia exhibited outstanding catalytic performance, stable regeneration activity, and giant surface area, and are promising in industrial catalysis. TGA showed that the decomposition of methyl could be attributed to Brønsted acid sites, and pyridine-FTIR spectroscopy proved the weak Brønsted sites on these synthesized metal-reinforced sulfated zirconia. Also, a relation between the reaction rate and weak Brønsted acid density is proposed.