改进溶胶凝胶过程制备Cds/SiO_2量子点玻璃(英文)

改进了溶胶凝胶转变过程中金属镉盐的引入方式，首次采用与镉盐络合（配合物法）和将镉盐穹表面活性剂形成微乳（微乳法）的不同方式将镉盐均匀掺杂于硅溶胶中，并制备了硫化镉掺杂质量比为0．88～7．4Wt％硫化镉／二氧化硅量子点复合玻璃材料．其吸收光谱中的吸收边界与常规溶胶凝胶过程制备样品的吸收光谱边界相比有更明显的蓝移，体现出更为显著的量子效应．     

Q态硫化镉纳米晶的制备、形态、量子尺寸效应与光催化性能

分别引入辛基硫醇作配体, 十六烷基三甲基溴化铵(或四丁基溴化铵)作有机正离子合成CdS纳米簇合物. 采用后沉淀分离技术, 分别制备得到粒度分布窄、粒径2~5 nm的Q态CdS纳米晶粒. 用紫外吸收光谱、透射电子显微镜、小角X射线衍射来测定粒径的大小. 在紫外光谱、荧光光谱和X射线衍射上, 表现出明显的量子尺寸效应. 当粒径大到一定程度(大于10 nm)时, 量子尺寸效应就不明显. 用ESR研究Q态纳米粒子的光催化性能, 结果表明加入纳米硫化镉颗粒可明显促使甲醇、乙醇发生光催化反应, 释放出CH3-·CHOH(对乙醇体系)或·CH2OH(对甲醇体系), 在有机合成上有着重要的应用价值.     

温度对聚酰胺-胺树形分子模板法制备CdS量子点的影响

为了研究温度对聚酰胺-胺(PAMAM)树形分子的模板法制备硫化镉(CdS)量子点的影响, 以4.5代(G4.5, 64个甲酯端基)PAMAM树形分子为模板, 在－10～30 ℃的温度范围内制备了分散良好的CdS量子点. 用透射电子显微镜(TEM)表征了CdS量子点的形貌、尺寸; 用紫外-可见光谱(UV-Vis)和光致发光光谱(PL)表征了CdS量子点的光学性能. 发现在相同条件下, 制备温度从－10 ℃升高到30 ℃, CdS量子点粒径从1.8 nm增大到3.4 nm, 其中在10 ℃时制备的量子点的尺寸分布最窄; CdS量子点的吸收和发射光谱均随温度增大而红移, 其中10 ℃时制备的量子点的室温光致发光效率最高. 这表明制备温度决定了树形分子的配位基团与Cd^2＋的分离速度, 并影响了CdS量子点的成核和生长过程, 从而最终决定了CdS量子点的尺寸及尺寸分布、光致发光颜色和发光效率.     

采用一锅法制备量子点/琼脂纳米复合凝胶

以天然高分子琼脂为稳定剂,采用简单便捷的一锅法制备Mn掺杂ZnS量子点/琼脂纳米复合凝胶,琼脂不仅作为制备量子点的稳定剂,同时也是纳米复合凝胶的主要成分。对该纳米复合凝胶中量子点的化学结构和尺寸大小进行了表征,并对纳米复合凝胶的荧光性能和凝胶性能进行了研究。实验结果表明,制备得到的纳米复合凝胶均一稳定,在302 nm紫外光下呈现十分明显的橙红色荧光。在该纳米复合凝胶的透射电子显微镜（TEM）表征中可以观察到大小比较均一、粒径为3 nm左右的纳米粒子,光谱分析结果进一步证实纳米复合凝胶中存在Mn掺杂ZnS量子点。该纳米复合凝胶不仅具有良好的荧光性能,还具有温度刺激响应性可逆溶胶-凝胶转变性能,同时具有较高的溶胶转变温度和较好的温度稳定性。利用这些性能特点,可以方便地制备纳米复合凝胶小球。此外,该纳米复合凝胶还可以被潜在应用于金属离子的荧光检测分析领域。     

一锅法制备量子点/琼脂纳米复合凝胶

以天然高分子琼脂为稳定剂,采用简单便捷的一锅法制备Mn掺杂ZnS量子点/琼脂纳米复合凝胶,琼脂不仅作为制备量子点的稳定剂,同时也是纳米复合凝胶的主要成分。对该纳米复合凝胶中量子点的化学结构和尺寸大小进行了表征,并对纳米复合凝胶的荧光性能和凝胶性能进行了研究。结果表明,制备得到的纳米复合凝胶均一稳定,在302nm紫外光下呈现十分明显的橙红色荧光。TEM表征显示,在该纳米复合凝胶中可以观察到大小比较均一、粒径为3nm左右的纳米粒子;光谱分析结果进一步证实纳米复合凝胶中存在Mn掺杂ZnS量子点。该纳米复合凝胶不仅具有良好的荧光性能,还具有温度刺激响应性可逆溶胶-凝胶转变性能,同时具有较高的溶胶转变温度和较好的温度稳定性。利用这些性能特点,可以方便地制备纳米复合凝胶小球。此外,该纳米复合凝胶还有望应用于金属离子的荧光检测分析领域。     

阳离子交换法制备稳定的近红外区核/壳型PbS/CdS量子点

硫化铅量子点(PbS QDs)的光氧化稳定性差是其应用于太阳能电池等领域的主要限制因素之一. 采用阳离子交换法在合成的PbS量子点表面包裹一层具有更稳定、更大禁带宽度的硫化镉(CdS)壳层, 制备出稳定的核/壳型PbS/CdS量子点; 同时, 研究了反应温度和反应时间对阳离子交换过程的影响规律. 通过透射电子显微镜和高分辨透射电子显微镜(TEM/HRTEM)、X射线衍射仪(XRD)、吸收光谱和荧光光谱考察了所制备PbS/CdS量子点的结构、光学特性和光氧化稳定性．结果表明: 阳离子交换过程中, 离子交换反应程度有限、仅发生在量子点的表面层, 但极薄的CdS壳层已能有效钝化PbS量子点的表面缺陷、显著提高其光氧化稳定性.     

CdS量子点与CdSe量子点间荧光共振能量转移研究

在有机相中合成了不同尺寸的CdS和CdSe量子点, 并利用Langmuir-Blodgett (LB)技术将相同尺寸的CdS和CdSe量子点组装成多层复合纳米有序结构. 采用荧光光谱研究了CdS和CdSe量子点在混合体系和多层复合纳米有序结构状态下的荧光共振能量转移(Fluorescence resonance energy transfer, FRET). 我们观察到CdS和CdSe量子点混合溶液与当溶剂挥发形成固态膜中, CdS量子点的荧光强度较溶液状态下强烈猝灭, 表明当颗粒间距离减小时CdS和CdSe量子点间产生较高效率的荧光共振能量转移. 在多层复合纳米有序结构中, 随着给体CdS量子点层数的增加, 单层受体CdSe量子点的荧光逐步增强, 这表明层间纵向能量转移率随给体层数的增加而提高.     

高分子模板对CdS量子点制备及其光催化性能的影响

分别以球形聚酰胺-胺(PAMAM)树形分子和线形聚乙烯吡咯烷酮(PVP)两种结构不同的高分子为模板, 原位制备了分散良好的CdS量子点(CdS QDs), 并以甲基橙为降解对象, 研究了高分子模板结构对CdS量子点的制备和光催化性能的影响. 结果表明, 以PAMAM 树形分子为模板制备的CdS量子点(CdS QDs/PAMAM)比以PVP为模板制备的CdS量子点(CdS QDs/PVP)的尺寸分布更窄, 激子吸收峰更明显, 光致发光(PL)强度更高|并且在量子点尺寸接近的情况下, CdS QDs/PAMAM的催化效率明显高于CdS QDs/PVP. 这是由于PAMAM树形分子独特的结构有利于生成尺寸均匀的CdS量子点, 且不易钝化量子点表面的活性位点|而线性的PVP分子量分布较宽, 使制备的量子点的尺寸分布较宽, 且PVP分子链缠绕在CdS量子点表面, 钝化了部分活性位点, 降低催化效率. 此外, CdS QDs/PAMAM的催化能力随粒径减小而增大.     

荧光磁性双功能Fe_3O_4/Alendronate@CdSe/CdS纳米复合物的制备与表征

采用化学共沉淀法制备了磁性Fe3O4纳米颗粒,并用四甲基氢氧化铵(TMAOH)、阿伦磷酸钠、丙烯酸丁酯和无水乙二胺对Fe3O4纳米颗粒表面进行修饰,制备出3代表面胺基化的Fe3O4树状分子.采用油相合成的方法制备CdSe/CdS量子点,再用巯基乙酸进行修饰,使其具有良好的水溶性和较好的稳定性.将制备的Fe3O4树状分子与修饰后的量子点进行连接,制备出双功能树状Fe3O4/Alendronate@CdSe/CdS微球.通过这种方法得到的材料的荧光性能明显增强,但材料的荧光性能并不随代数成线性变化的.     

ITO/TiO2表面电沉积CdS纳米粒子及其薄膜的光电性能

采用阴极恒电位沉积方法, 在TiO2表面沉积制备出CdS纳米粒子. XRD和SEM测试结果表明, CdS粒子的结构以六方晶相为主, 粒径分布均匀, 表面形貌呈菜花状. 通过调节沉积电位和沉积时间等因素在一定程度上可以控制CdS纳米粒子的生长. 随着沉积电位变负, CdS粒子的粒径逐渐减小. 沉积时间越短, 粒子粒径越小. 紫外-可见吸收光谱测试结果表明, 不同条件下制备出来的CdS粒子表现出一定的量子尺寸效应. 此外, 沉积条件也会影响ITO/TiO2/CdS复合半导体薄膜的光电性能.     

改进溶胶凝胶过程制备CdS/SiO2量子点玻璃

The sol-gel process has been applied successfully to the preparation of small-sized CdS-doped silica glasses. Silica glasses containing 0.887.4wt% CdS were synthesized in a process in which ethylene diamine tetra-acetic acid (EDTA) or surfactant microenmulsion is added to obtain smaller size CdS crystal with narrower size distribution. These additives can be removed after the heat treatment during the densification procedure. The optical absorption edge of CdS crystals in doped glasses obtained by new methods exhibited larger blue shifts(comparing with the bulk absorption edge value of CdS crystal) than that without addition of EDTA or surfactant microemulsion in the preparing process. Thus the quantum size effect was found to be enhanced for glasses containing CdS prepared by the improved sol-gel process.     

Synthesis and structure of some zinc and cadmium 1,2-cyclohexanedione dioximines

Russian Journal of Coordination Chemistry - The complexes [Zn(CH3COO)2(NioxH2)(DMF)(H2O)] (I), [Cd(CH3COO)2-(NioxH2)(DMF)(H2O)] (II), [Zn(CH3COO)2(NioxH2)(S-Nia)(H2O)] · DMF (III),...     

New elaboration of Na2O-B2O3-SiO2 glass doped with CdS nanocrystals from gel formed in aqueous solution

A new route for preparing a CdS doped sodium borosilicate glass from a gel formed in an aqueous solution is described. This elaboration process allows the preparation of a gel which starts densifying at 400°C just after the Cd sulphurizing process ensuring the protection of crystallites from oxidation. The densification of the matrix is completed at the fusion temperature (730°C), which is low enough to reduce the coalescence of the crystallites. Microstructural and optical characterization of the CdS doped glasses indicate that the crystallite size depends upon the Cd concentration. A model to calculate the crystallite size from optical absorption spectra is proposed. It indicates that the average sizes of crystallites range from 11 nm for a concentration of 0.03 mol% Cd to 3.7 nm for 0.016 mol% Cd.     

SYNTHESIS,CRYSTAL STRUCTURES,AND LUMINESCENT PROPERTIES OF Zn(II)/Cd(II) COMPLEXES ASSEMBLED BY 4-AMINOPHENYLHYDROXAMIC ACID

Journal of Structural Chemistry - Two coordination complexes, namely [Zn2(4-APha)2(CH3COO)2(H2O)2] (1) and [Cd(4-APha)(CH3COO) (H2O)0.5]4·6H2O (2)...     

Synthesis of Quantum-Size Cadmium-Zinc Sulfide Particle-Doped Glasses by the Sol-Gel Method

The optical properties of extremely small particles of semiconductor materials provide a sensitive probe of the band structure in the materials. The Sol-Gel process has been applied successfully to the preparation of small particle-size CdS-doped silica glasses such that quantum size effects are significant. Transparent and colorless gels were prepared through the hydrolysis of a complex solution of Si(OC₂H₅)₄, (CH₃)₂SO, Zn(CH₃COO)₂·2H₂O and Cd(CH₃COO)₂·2H₂O. These gels were heated at 350, 500 and 750°C. The thermal treatments of samples were established by TDA/TGA analysis. By means of shift in optical absorption spectra, quantum size effects could be inferred in glasses containing these calcogenide microcrystals.     

回火处理对LiNi1/3Co1/3Mn1/3O2结构和电化学性能的影响

以硝酸锂、四水合乙酸镍、四水合乙酸钴、四水合乙酸锰、氨水和草酸为原料,通过共沉淀-燃烧法合成了锂离子电池正极材料LiNi1/3Co1/3Mn1/3O2,采用XRD、SEM和充放电试验对合成产物进行了表征,研究了回火处理对合成产物结构和电化学性能的影响.实验结果表明,嫩烧反应形成的LiNi1/3C1/3Mn31/3O2结...     

The role of Zn-OR and Zn-OH nucleophiles and the influence of para-substituents in the reactions of binuclear phosphatase mimetics

Analogues of the ligand 2,2'-(2-hydroxy-5-methyl-1,3-phenylene)bis(methylene)bis((pyridin-2-ylmethyl)azanediyl)diethanol (CH(3)H(3)L1) are described. Complexation of these analogues, 2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)-4-methylphenol (CH(3)HL2), 4-bromo-2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)phenol (BrHL2), 2,6-bis(((2-methoxyethyl)(pyridin-2-ylmethyl)amino)methyl)-4-nitrophenol (NO(2)HL2) and 4-methyl-2,6-bis(((2-phenoxyethyl)(pyridin-2-ylmethyl)amino)methyl)phenol (CH(3)HL3) with zinc(II) acetate afforded [Zn(2)(CH(3)L2)(CH(3)COO)(2)](PF(6)), [Zn(2)(NO(2)L2)(CH(3)COO)(2)](PF(6)), [Zn(2)(BrL2)(CH(3)COO)(2)](PF(6)) and [Zn(2)(CH(3)L3)(CH(3)COO)(2)](PF(6)), in addition to [Zn(4)(CH(3)L2)(2)(NO(2)C(6)H(5)OPO(3))(2)(H(2)O)(2)](PF(6))(2) and [Zn(4)(BrL2)(2)(PO(3)F)(2)(H(2)O)(2)](PF(6))(2). The complexes were characterized using (1)H and (13)C NMR spectroscopy, mass spectrometry, microanalysis, and X-ray crystallography. The complexes contain either a coordinated methyl- (L2 ligands) or phenyl- (L3 ligand) ether, replacing the potentially nucleophilic coordinated alcohol in the previously reported complex [Zn(2)(CH(3)HL1)(CH(3)COO)(H(2)O)](PF(6)). Functional studies of the zinc complexes with the substrate bis(2,4-dinitrophenyl) phosphate (BDNPP) showed them to be competent catalysts with, for example, [Zn(2)(CH(3)L2)](+), k(cat) = 5.70 ± 0.04 × 10(-3) s(-1) (K(m) = 20.8 ± 5.0 mM) and [Zn(2)(CH(3)L3)](+), k(cat) = 3.60 ± 0.04 × 10(-3) s(-1) (K(m) = 18.9 ± 3.5 mM). Catalytically relevant pK(a)s of 6.7 and 7.7 were observed for the zinc(II) complexes of CH(3)L2(-) and CH(3)L3(-), respectively. Electron donating para-substituents enhance the rate of hydrolysis of BDNPP such that k(cat)p-CH(3) > p-Br > p-NO(2). Use of a solvent mixture containing H(2)O(18)/H(2)O(16) in the reaction with BDNPP showed that for [Zn(2)(CH(3)L2)(CH(3)COO)(2)](PF(6)) and [Zn(2)(NO(2)L2)(CH(3)COO)(2)](PF(6)), as well as [Zn(2)(CH(3)HL1)(CH(3)COO)(H(2)O)](PF(6)), the (18)O label was incorporated in the product of the hydrolysis suggesting that the nucleophile involved in the hydrolysis reaction was a Zn-OH moiety. The results are discussed with respect to the potential nucleophilic species (coordinated deprotonated alcohol versus coordinated hydroxide).     

CdS/SiO2复合材料的低频Raman散射研究

对用溶胶凝胶法制备的ＣｄＳ／ＳｉＯ２复合材料进行低频Ｒａｍａｎ散射研究，结果表明可从其低频Ｒａｍａｎ散射峰位计算出ＣｄＳ微晶的粒径，两种不同的低频振动模式由激发光的两种偏振方向加以区分，低频Ｒａｍａｎ散射射的二级散射峰根据实验结果加以指认，所得平均粒径结果与透射电镜观察结果有较好的对应关系，复合材料吸收光谱吸收边蓝移与ＣｄＳ纳米子粒径之间存在着密切的关系，实验证明，样品吸收边能量与ＣｄＳ平均粒径的     

Assembly of tetra, di and mononuclear molecular cadmium phosphonates using 2,4,6-triisopropylphenylphosponic acid and ancillary ligands

The reaction of ArPO(3)H(2) (Ar = 2,4,6-iPr(3)-C(6)H(2)) with Cd(CH(3)COO)(2).2H(2)O using various co-ligands such as methanol, dimethylformamide (DMF) and 3,5-dimethylpyrazole (DMPZH) resulted in the formation of tetranuclear assemblies [Cd(4)(ArPO(3))(2)(ArPO(3)H)(4)(CH(3)OH)(4)].3(CH(3)OH) (1), [Cd(4)(ArPO(3))(2)(ArPO(3)H)(4)(DMF)(4)].3(DMF) (2) and [Cd(4)(ArPO(3))(2)(ArPO(3)H)(4)(DMF)(2)(DMPZH)(2)].2(DMF).2(H(2)O) (3). In all of these compounds the tetranuclear cadmium array, containing two five-coordinate and two six-coordinate cadmium atoms, is held together by two mu(4) capping [ArPO(3)](2-) and four anisobidentate mu(2) [ArPO(2)(OH)](-) ligands. Each cadmium atom is bound to an additional ancillary ligand. The reaction of ArPO(3)H(2) with Cd(CH(3)COO)(2).2H(2)O in the presence of the chelating ligand 2,2'-bipyridine (bipy) leads to the exclusive formation of the dinuclear assembly [Cd(2)(ArPO(3)H)(4)(bipy)(2)].(CH(3)OH)(H(2)O) (4). The latter contains an eight-membered Cd(2)P(2)O(4) inorganic ring formed as a result of the bridging coordination action of two anisobidentate mu(2) [ArPO(2)(OH)](-) ligands. Each cadmium atom is bound by one chelating bipy and one monodentate [ArPO(2)(OH)](-) ligands. Use of four equivalents of 3,5-dimethylpyrazole leads to the formation of the mononuclear derivative [Cd(ArPO(3)H)(2)(DMPZH)(4)] (5). The molecular structure of the latter comprises of a central cadmium atom surrounded by six monodentate ligands. Four of these are neutral pyrazole ligands that occupy the equatorial plane; the remaining two are anionic phosphinate ligands which are present trans to each other. The thermal analysis of 1 and 4 reveals that the char residue obtained at 600 degrees C consists predominantly of Cd(2)P(2)O(7).