Studies on Structural,Morphological and Optical Properties of Chemically Deposited CdS<Subscript>1-x</Subscript>Se<Subscript>x</Subscript> Thin Films

The thin films of CdS_1-xSe_x were successfully deposited over glass substrates by chemical bath deposition technique. Cadmium acetate, thiourea and sodium selenosulfate were used as source materials for Cd²⁺, S^2? and Se^2? ions, while 2-mercaptoethanol was used as capping agent. The various deposition conditions such as precursor concentration, deposition temperature, pH and deposition time were optimized for the deposition of CdS_1-xSe_x thin films of good quality and the films were annealed at 200° and 300 °C. The structural, morphological, chemical and optical properties were examined by various characterization techniques and discussed in detail. The optical band gap of CdS_1-xSe_x thin film samples were estimated and found in the range from 2.11 to 1.79 eV for as-deposited and annealed thin films.     

Optoelectronics properties of TiO<Subscript>2</Subscript>:Cu thin films obtained by sol gel method

In this research, Cu-doped TiO₂ thin films have been successfully deposited onto a glass substrate by Sol–gel technique using dip coating method. The films were annealed at different annealing temperatures (400–500 °C) for 1 h. The structural, optical and electrical properties of the films were investigated and compared using X-ray Diffraction, UV–visible spectrophotometer and 4-point probe method. Optical analysis by mean transmittance T(λ) and absorption A(λ) measurements in the wavelength range between 300 to 800 nm allow us to determine the indirect band gap energy. DRX analysis of our thin films of TiO₂:Cu shows that the intensities of the line characteristic of anatase phase increasing in function of the temperature.     

Effect of annealing on photo accelerated chemically deposited Indium sulfide thin films with various cationic precursors

The present work reports the deposition of Indium sulfide thin films by a recently established novel method called photo-assisted chemical deposition technique. It is a very low cost method for the deposition of thin films, and can be easily scaled up for industrial production. Indium sulfide thin films are deposited on glass substrates through various cationic precursors and the effect of annealing on structural, optical and morphological properties was investigated. Films have been characterized with respect to their structural, optical and morphological properties by means of X-ray diffraction, UV–VIS-NIR Spectrophotometer, SEM and AFM techniques. As-deposited films on glass substrates were amorphous and became crystalline after annealing. The grain size of all the annealed films are larger than the as-prepared films and attained a maximum value for the film prepared with sulfate precursor. The calculated strain was compressive in nature. Surface roughness was estimated from the AFM measurements and found to be decreased in annealed samples. The film deposited with chloride precursor showed a higher visible transmittance of around 80 % and became 90 % on annealing. The variation of packing density follows the variation of the refractive index. The optical band gap of the samples was estimated and found to be within the range of 2.45–2.71 eV, which is in quite agreement with the literature.     

Physical properties of vacuum evaporated CdTe thin films with post-deposition thermal annealing

This paper presents the physical properties of vacuum evaporated CdTe thin films with post-deposition thermal annealing. The thin films of thickness 500 nm were grown on glass and indium tin oxide (ITO) coated glass substrates employing thermal vacuum evaporation technique followed by post-deposition thermal annealing at temperature 450 °C. These films were subjected to the X-ray diffraction (XRD),UV-Vis spectrophotometer, source meter and atomic force microscopy (AFM) for structural, optical, electrical and surface morphological analysis respectively. The X-ray diffraction patterns reveal that the films have zinc-blende structure of single cubic phase with preferred orientation (111) and polycrystalline in nature. The crystallographic and optical parameters are calculated and discussed in brief. The optical band gap is found to be 1.62 eV and 1.52 eV for as-grown and annealed films respectively. The I–V characteristics show that the conductivity is decreased for annealed thin films. The AFM studies reveal that the surface roughness is observed to be increased for thermally annealed films.     

Tuning the properties of tin oxide thin films for device fabrications

Tin oxide thin films were deposited on well cleaned glass substrates by thermal evaporation in vacuum and were annealed at 500?^°C in the open atmosphere inside a furnace for 90 min for promoting the sensitivity of the films. The X-ray diffraction studies revealed that the as-deposited films were amorphous in nature and the annealed films showed appreciable crystalline behavior. The annealed thin films were then irradiated using ⁶⁰Co gamma source. The radiation induced changes were then studied by X-ray diffraction, scanning electron microscopy, UV–vis spectroscopy and I–V characterization. The remarkable increase in the average grain size, the decrement in the energy band gap and resistivity due to the gamma irradiations up to a certain dose and the reversal of these properties at higher doses are the important observations. The large changes in the conductivity and energy band gap of the annealed thin films due to gamma irradiation make these films quite important device material for the fabrication of gamma sensors and dosimeters.     

Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se

Cu₂ZnSn(S_xS_1?x)₄ (CZTSSe) thin films were prepared by annealing a stacked precursor prepared on Mo coated glass substrates by the sputtering technique. The stacked precursor thin films were prepared from Cu, SnS₂, and ZnS targets at room temperature with stacking orders of Cu/SnS₂/ZnS. The stacked precursor thin films were annealed using a tubular two zone furnace system under a mixed N₂ (95%) + H₂S (5%) + Se vaporization atmosphere at 580 °C for 2 h. The effects of different Se vaporization temperature from 250 °C to 500 °C on the structural, morphological, chemical, and optical properties of the CZTSSe thin films were investigated. X-ray diffraction patterns, Raman spectroscopy, and X-ray photoelectron spectroscopy results showed that the annealed thin films had a single kesterite crystal structure without a secondary phase. The 2θ angle position for the peaks from the (112) plane in the annealed thin films decreased with increasing Se vaporization temperature. Energy dispersive X-ray results showed that the presence of Se in annealed thin films increased from 0 at% to 42.7 at% with increasing Se vaporization temperatures. UV–VIS spectroscopy results showed that the absorption coefficient of all the annealed thin films was over 10⁴ cm^?1 and that the optical band gap energy decreased from 1.5 eV to 1.05 eV with increasing Se vaporization temperature.     

Swift heavy ion provoked structural, optical and electrical properties in SnO2 thin films

SnO₂ thin films grown on glass substrates at 300 ^°C by reactive thermal evaporation and annealed at 600 ^°C were irradiated by 120 MeV Ag⁹⁺ ions. Though irradiation is known to induce lattice disorder and suppression of crystallinity, we observe grain growth at a certain fluence of irradiation. X-ray diffraction (XRD) revealed the crystalline nature of the films. The particle size estimated by Scherrer’s formula for the irradiated films was in the range 10–25 nm. The crystallite size increases with increase in fluence up to 1×10¹² ions?cm^?2, whereas after that the size starts decreasing. Atomic force microscope (AFM) results showed the surface modification of nanostructures for films irradiated with fluences of 1×10¹¹ ions?cm^?2 to 1×10¹³ ions?cm^?2. The UV–visible spectrum showed the band gap of the irradiated films in the range of 3.56 eV–3.95 eV. The resistivity decreases with fluence up to 5×10¹² ions?cm^?2 and starts increasing after that. Rutherford Backscattering (RBS) reveals the composition of the films and sputtering of ions due to irradiation at higher fluence.     

Photoluminescence study of nitrogen-doped p-type Mg x Zn1−x O nanocrystalline thin film grown by plasma-assisted molecular beam epitaxy

Tin sulfide thin films have been grown on glass substrates by chemical bath deposition technique (CBD) at room temperature and irradiated with UV light source of wavelength 355 nm. The effect of UV illumination on the physical properties of the films was compared with that of the as-prepared film. Though the thickness of the films was unaltered after illumination, the structural, optical and electrical properties changed considerably. Structural studies showed the polycrystalline nature of the UV-illuminated sample, whereas the as-prepared film was mono crystalline. Both films were orthorhombic structure with Sn₂S₃ phase. The optical properties of the films were systematically studied using the optical absorbance and reflection spectra. Studies on the reflection spectra showed higher reflectance in visible and infrared region for the UV-illuminated films and lower reflectance in the infrared region for the as-prepared one. The variation of the refractive index of the samples was also analyzed. The optical absorption coefficient and the optical band gap energy of the films were evaluated. The irradiated film exhibited lower band gap of 1.74 eV than the value of as-prepared film, i.e., 1.77 eV. The measured resistivity of the tin sulfide thin films was found to be of the order of 10⁸ and 10⁹ Ωcm for UV-illuminated and as-prepared films, respectively. The SEM images showed the presence of worm-like nanostructures with almost similar appearance in both the films.     

Investigation of structural,optical and electrical properties of ZnS thin films prepared by nebulized spray pyrolysis for solar cell applications

Zinc sulfide (ZnS) thin films have been deposited on microscopic glass and fluorine doped tin oxide substrates by nebulized spray pyrolysis technique with different substrate temperature and molar concentration. The structural, morphological, optical and electrical properties of the prepared ZnS thin films have been studied using X-ray diffraction (XRD), field emission scanning electronic microscopy (FESEM), UV–Vis spectrophotometer and Hall effect measurement. XRD patterns confirm that the prepared films are hexagonal wurtzite structure, with (100) as preferred orientation. The structural parameters such as crystallite size, dislocation density and microstrain have been calculated from XRD study. Hydrophilic and hydrophobic nature is revealed by contact angle measurements. FESEM image of the ZnS thin films show smooth and uniform spherical grains are uniformly arranged on the films surface. Optical transmittance spectrum illustrate that the ZnS films were high transparent in the visible region and gets absorbed in the UV region. The optical band gap value of the ZnS thin films decreased with the increasing substrate temperature. The average transmittance is found to be 82% and direct band gap value is 3.56 eV at 400 °C for set D. The Activation energy of the prepared ZnS films was determined from the graph between ln (ρ) versus temperature (K^?1) using a four-probe method.     

Effect of annealing atmosphere on microstructural and photoluminescence characteristics of multiferroic BiFeO3 thin films prepared by pulsed laser deposition technique

The effect of annealing atmosphere on microstructural and photoluminescence characteristics of multiferroic BiFeO₃ (BFO) thin films deposited by pulsed laser deposition (PLD) technique is reported. The films annealed in oxygen environment showed improved microstructure and photoluminescence (PL) characteristics. The PL spectra of oxygen-annealed BFO thin films at room temperature show a strong emission in the blue region. A plot of (αE)² vs. photon energy (E) (α-absorption coefficient) and the linear extrapolation to (αE)²=0 indicates a direct gap at 2.69±0.02 eV, which is in agreement with the previous reports. The results obtained in this study are accordingly expected to facilitate the understanding and optimization of BFO thin films for photovoltaic applications.     

Volume of precursor solution effect on the properties of SnO<Subscript>2</Subscript> thin films prepared by nebulized spray pyrolysis technique

Undoped SnO₂ thin films have been deposited on amorphous glass substrates with different precursor solution volume (10, 15, 20 and 25 ml) using simple and cost-effective nebulized spray pyrolysis technique. The influence of precursor solution on structural, optical, photoluminescence and electrical properties had been studied. The X-ray diffraction spectra prove the polycrystalline nature of SnO₂ with tetragonal structure. All the films show a preferred growth orientation along (110) diffraction plane. The average transmittance of SnO₂ thin films varied between 82 and 75% in the visible as well as IR region. The band gap energy decreases from 3.74 to 3.64 eV corresponding to direct transitions with the precursor solution volume had increased from 10 to 20 ml and then increased as 3.72 eV for 25 ml. SEM pictures demonstrated polyhedrons like grains. EDX confirmed the existence of Sn and O elements in all the prepared SnO₂ thin films. Photoluminescence spectra at room temperature revealed that the four emission bands in all the samples such as sharp dominant peak at 361 nm with shoulder peak at 377 nm (UV region), a broad and low intensity peak at 492 nm (blue region) and 519 nm (green region). The electrical parameters were examined by Hall effect measurements, which demonstrated that the film prepared at 20 ml precursor solution volume possess minimum resistivity 2.76?×?10^?3 Ω-cm with activation energy 0.10 eV and maximum figure of merit 1.54?×?10^?2 (Ω/sq)^?1.     

带隙可调的Al，Mg掺杂ZnO薄膜的制备

利用射频磁控溅射（RF-MS）方法,固定Al₂O₃掺杂量2 wt%,Mg掺杂量分别为1 wt%,3 wt%和5 wt%,在玻璃基底上制备了Al掺杂和Al,Mg共掺杂的ZnO薄膜,在500 ℃空气中退火2 h后,测量并比较了它们的光学和电学性质．结果表明,Al,Mg共掺杂的ZnO薄膜结晶质量良好,具有ZnO纤锌矿结构,具有较强的（002）面衍射峰,表明薄膜晶体沿c轴优先生长;与Al掺杂ZnO薄膜相比蓝端光透射率增加,1 wt%和3 wt% Mg掺杂薄 关键词： 射频磁控溅射 ZnO薄膜 Al Mg共掺杂     

Spin-coating deposition of PbS and CdS thin films for solar cell application

In this work, we describe a simple spin-coating deposition technique for lead sulphide (PbS) and cadmium sulphide (CdS) films from a methanolic metal–thiourea complex. The characterization of the films by X-ray diffraction and X-ray photoelectron spectroscopy techniques revealed that pure cubic phase PbS and CdS layers were formed via this method. As shown by atomic force microscopy and scanning electron microscopy results, both films were homogeneous and presented a smooth surface. Optical properties showed that the energy band gap of PbS and CdS films were around 1.65 and 2.5 eV, respectively. The PbS film is p-type in nature with an electrical conductivity of around 0.8 S/cm. The hole concentration and mobility were 2.35 × 10¹⁸ cm^?3 and 2.16 × 10^?3 cm²/V/s, respectively, as determined from Hall measurement. Both films were used to develop a thin film solar cell device of graphite/PbS/CdS/ITO/glass. Device characterization showed the power conversion efficiency of around 0.24 %. The corresponding open circuit voltage, short circuit current and fill factor were 0.570 V, 1.32 mA/cm² and 0.32, respectively.     

Effects of post-thermal treatments on morphological and optical properties of NiO/Ni(OH)2 thin films synthesized by solution growth

Room temperature deposition of PVP capped nanostructured NiO/Ni(OH)₂ thin film, the morphological and optical characterizations by solution growth technique are reported. The nanostructured thin films which were deposited on optical glass substrates were annealed at different temperatures and then subjected to structural, morphological and optical characterizations. X-ray diffraction measurements of the films revealed that higher temperatures during the thermal treatment enhanced the crystallinity of the thin films. The SEM surface micrographs show non-interconnected uniformly deposited fibre-like structures with approximate lengths between 400 and 1200 nm. The optical band gap energy roughly decreased from about 2.7 eV to about 2.2 eV with thermal treatment. The absorbance of the thin films annealed at 300 and 400 °C was as high as 90% in the visible region of the electromagnetic spectrum. These materials could be useful in solar thermal conversion processes.     

Structure distortion, optical and electrical properties of ZnO thin films co-doped with Al and Sb by so--gel spin coating

ZnO thin films co-doped with Al and Sb with different concentrations and a fixed molar ratio of AlCl₃ to SbCl₃ at 1:2, are prepared by a sol--gel spin-coating method on glass annealed at 550 ℃ for 2 h in air. The x-ray diffraction results confirm that the ZnO thin films co-doped with Al and Sb are of wurtzite hexagonal ZnO with a very small distortion, and the biaxial stresses are 1.03×10⁸, 3.26×10⁸, 5.23×10⁸, and 6.97×10⁸ Pa, corresponding to those of the ZnO thin films co-doped with Al and Sb in concentrations of 1.5, 3.0, 4.5, 6.0 at% respectively. The optical properties reveal that the ZnO thin films co-doped with Al and Sb have obviously enhanced transmittance in the visible region. The electrical properties show that ZnO thin film co-doped with Al and Sb in a concentration of 1.5 at% has a lowest resistivity of 2.5Ω·cm.     

Optical characterization of tin containing novel chalcogen rich glassy semiconductors

Amorphous thin film materials with different compositions of Se_80?xTe₂₀Sn_x (0 ≤ x ≤ 10) system have been deposited on glass substrates by a well known thermal evaporation technique. Structural characterization of different compositions of aforementioned system has been done by Raman spectroscopy. The optical properties of thin films have been studied in the wavelength range 200–1100 nm by the utilization of the optical absorbance spectra of deposited thin films. To calculate the optical band gap from the optical absorption spectra, we have used Tauc model that follows the mechanism of allowed ‘non-direct electronic transition’. Subsequently, we have determined the energy band gap, metallization criterion and refractive index of thin films of aforesaid system. The variation in optical properties with composition has been interpreted in terms of density of defect states.     

Structural,optical and electrical properties of 60 MeV C5+ ion-irradiated poly(3-methylthiophene) films

The structural, optical and electrical properties of 60 MeV C⁵⁺ ion-irradiated poly(3-methylthiophene) (P3MT) synthesized by the chemical oxidation polymerization method have been studied. The P3MT powder was dissolved in chloroform (CHCl₃), and thin films of thickness 2 μm were prepared on glass and Si substrates. The polymerization was confirmed by the FTIR spectrum. Then films were irradiated by 60 MeV C⁵⁺ ions at different fluences. FTIR spectra show methyl group evolution after irradiation. The optical band gap decreases slightly after irradiation and the DC conductivity increases by about one order of magnitude after irradiation at the highest fluence. The role of S _e has also been discussed when compared with 60 MeV Si⁵⁺ ion irradiation of P3MT. The morphological changes are observed using SEM.     

Electric field gradient in nanostructured SnO2 studied by means of PAC spectroscopy using 111Cd or 181Ta as probe nuclei

Electric quadrupole interactions were studied in pure and Mn-doped powder samples and thin films of SnO₂ using perturbed γγ angular correlation spectroscopy (PAC). The powder samples were prepared by Sol gel method and the thin film were prepared on the Si (100) substrate by sputtering technique using Sn in the oxygen atmosphere. The samples were characterized by x-ray diffraction, energy dispersive spectroscopy and scanning electron microscopy. The thickness of the film was 100 nm. The average particle size of the SnO₂ powder samples was determined to be smaller than 60 nm. The radioactive ¹¹¹In and ¹⁸¹Hf tracers were introduced in the powder samples during the sol gel chemical process. Radioactive ¹¹¹In was implanted on the SnO₂ thin films using the University of Bonn ion implanter (BONIS). PAC measurements were carried out in a four BaF₂ detector spectrometer in the temperature range of 77–973 K for samples annealed at different temperatures. The PAC results for both nuclear probes show the presence of two electric quadrupole interactions. The major fractions in both cases correspond to the substitutional sites in the rutile phase of SnO₂. The results are compared with previous PAC measurements.     

Effects of deposition temperature and hydrogen flow rate on the properties of the Al-doped ZnO thin films and amorphous silicon thin-film solar cells

A compound of 98 mol% ZnO and 1 mol% Al₂O₃ (AZO, Al:Zn = 98:2) was sintered at 1350 °C as a target and the AZO thin films were deposited on glass using a radio frequency magnetron sputtering system. The effects of deposition temperature (from room temperature to ～300 °C) on the optical transmission spectrum of the AZO thin films were studied. The Burstein–Moss shift was observed and used to prove that defects in the AZO thin films decreased with increasing deposition temperature. The variations in the optical band gap (E _g) values of the AZO thin films were evaluated from plots of (αhv)²=c(hν?E _g), revealing that the measured E _g values increased with increasing deposition temperature. The effects of the H₂ flow rate during deposition (0 %～11.76 %, deposition temperature of 200 °C) on the crystallization, morphology, resistivity, carrier concentration, carrier mobility, and optical transmission spectrum of the AZO thin films were measured. The chemical structures of the Ar-deposited and 2 % H₂-flow rate-deposited AZO thin films (both were deposited at 200 °C) were investigated by XPS to clarify the mechanism of improvement in resistivity. The prepared AZO thin films were also used as transparent electrodes to fabricate amorphous silicon thin-film solar cells, and their properties were also measured.     

Influence of solvent on solution processed Cu2ZnSnS4 nanocrystals and annealing induced changes in the optical,structural properties of CZTS film

The well-known quaternary Cu₂ZnSnS₄ (CZTS) chalcogenide thin films are playing an important role in modern technology. The CZTS nanocrystal were successfully prepared by solution method using water, ethylene glycol and ethylenediamine as different solvent. The pure phase material was used for thin film coating by thermal evaporation method. The prepared CZTS thin films were characterized by XRD, Raman spectroscopy, FESEM, XPS and FT-IR spectroscopy. The XRD and Raman spectroscopy analysis revealed the formation of polycrystalline CZTS thin film with tetragonal crystal structure after annealing at 450 ^°C. The oxidation state of the annealed film was studied by XPS. A direct band gap about 1.36 eV was estimated for the film from FT-IR studies, which is nearly close to the optimum value of band gap energy of CZTS materials for best solar cell efficiency. The CZTS annealed thin films are more suitable for using as a p-type absorber layer in a low-cost solar cell.