Facile one-pot hydrothermal synthesis of B/N-codoped TiO2 hollow spheres with enhanced visible-light photocatalytic activity and photoelectrochemical property

B/N-codoped TiO₂ hollow spheres (B/N-THs) were synthesized by facile one-pot hydrothermal method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption isotherms, UV–vis diffuse reflectance spectrum (DRS) and X-ray photoelectron spectroscopy (XPS). The B/N-THs have large surface areas (up to 172.1 m² g⁻¹). The photocatalytic activities of as-prepared THs were evaluated by degradation of Reactive Brilliant Red dye X-3B solution under visible light irradiation. The results showed that B/N-THs exhibited the highest photocatalytic activity due to their high surface area and synergetic effect of B/N-codoped. A photocurrent–time spectrum was examined by anodic photocurrent response to characterize the electron-transferring efficiency in the process of photocatalysis reaction.     

Photocatalytic performance of yttrium-doped CNT-ZnO nanoflowers synthesized from hydrothermal method

We synthesized yttrium-doped CNT-ZnO (CNT-YZO) nanoparticles (NPs) and nanoflowers (NFs) from the hydrothermal method at 130 °C. The effect of Y³⁺-concentrations in nanostructured CNT-YZO was determined in terms of the photocatalytic degradation of methylene blue (MB). Microstructural analysis showed the hexagonal cubic structure of ZnO regardless of Y-concentration or the addition of CNTs during the nucleation and growth. The specific surface area, total pore volume, and mean pore diameter of typical CNT-YZO NFs were observed to be 36.109 m²/g, 0.162 cm³/g, and 17.932 nm, respectively. The photocatalytic degradation performance of CNT-YZO NFs improved due to increase reactive sites of the catalyst and reduced recombination of photo-induced carriers. The surface-area normalized first-order decomposition rates (r/m²) of CNT-YZO NFs showed the highest photocatalytic degradation (99%). The CNT-YZO has produced a new kind of material for the photocatalytic degradation under the irradiation of visible light using a solar simulator.     

Effective photocatalytic degradation of organic pollutant by ZnS nanocrystals synthesized via thermal decomposition of single-source precursor

2-Aminocyclopentene-1-dithiocarboxylate complex of zinc(II) has been synthesized and found to be an effective single-source precursor for the preparation of ZnS NCs (rod and sphere) by the use of ethylenediamine and hexadecylamine as structure directing solvents. Structural characterizations were carried out using XRD, TEM and BET measurements and the optical properties by UV-Vis and PL spectroscopic techniques. The prepared ZnS NCs show effective photocatalytic activity towards the degradation of Rose Bengal dye (RB) under light irradiation for their probable application in waste water treatment. The degradation mechanism of RB dye under light irradiation is established by terephthalic acid photoluminescence probing technique.     

Mesoporous titania photocatalyst: effect of relative humidity and aging on the preparation of mesoporous titania and on its photocatalytic activity performance

Mesoporous TiO₂ has been synthesized by the sol–gel method, using a nonionic triblock copolymer P123 as surfactant template under acidic conditions. The as-prepared samples were characterized by thermogravimetry–differential thermal analysis (TG–DTA), nitrogen absorption–desorption (BET), field emission scanning electron microscopy, and transmission electron microscopy. The photocatalytic activity of the mesoporous TiO₂ was evaluated by degradation of methylene blue under high-intensity UV light irradiation; the amount of methylene blue was measured by UV–visible spectroscopy. TG–DTA analysis revealed that the surfactant had been removed partly in as-synthesized samples. BET analysis proved that all the samples retained mesoporosity with a narrow pore-size distribution (4.5–6.3 nm) and high surface area (103–200 m²/g). All calcined mesoporous TiO₂ had high photocatalytic activity in the photodegradation of methylene blue.     

Solar active nano-TiO2 for mineralization of Reactive Red 120 and Trypan Blue: 1st Nano Update

Nano-TiO₂ was synthesized by sol–gel method. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) images, transmission electron microscope (TEM), BET surface area measurement and DRS analysis. The formation of anatase phase nano-TiO₂ was confirmed by XRD measurements and its crystalline size is found to be 15.2 nm. SEM images depict the crystalline nature of prepared TiO₂. The BET surface area of prepared TiO₂ is found to be 86.5 m² g^?1 which is higher than that of commercially available TiO₂–P25. The photocatalytic activity of prepared anatase phase TiO₂ has been tested for the degradation of two azo dyes: Reactive Red 120 (RR 120) and Trypan Blue (TB) using solar light. The photocatalytic activity of nano-TiO₂ is higher than TiO₂–P25 under solar light. The mineralization of dyes has been confirmed by chemical oxygen demand (COD) measurements.     

Solvothermal Synthesis of Cs0.33WO3/LDHs Composite as a Novel Visible‐Light‐Driven Photocatalyst

A novel Cs_0.33WO₃/LDHs (CWLDH) composite was synthesized by simple two steps solvothermal method and first investigated as the photocatalyst for tetracycline (TC) and Congo red (CR) degradation under visible light irradiation. The CWLDH heterostructures catalysts were characterized by XRD, UV–Vis, SEM, XPS and BET. The composite CWLDH showed enhanced photocatalytic activity compared with pure Cs_0.33WO ₃ and NiAl‐LDH under identical experimental conditions. The enhanced photocatalytic activity was mainly attributed to the higher visible light‐absorbing ability, efficient electron–hole separation and prolonged lifetimes of photogenerated charges. The photocatalyst presented a high photocatalytic activity (92%) at the optimum of CWLDH ‐3 and initial TC concentration of 40 mg L⁻¹. Besides, the degradation efficiency of TC is higher than 75% for reused CWLDH after four cycles, demonstrating that it could be used as a potential catalyst with good photocatalytic activity, stability and reusability. According to the experimental results, a possible photocatalytic mechanism of CWLDH was discussed.     

2D laminated cylinder-like BiFeO3 composites: Hydrothermal preparation,formation mechanism,and photocatalytic properties

BiFeO₃ perovskite with 2D laminated cylinder-like structure was prepared via a facile one-pot hydrothermal method, whose morphologies and optical properties was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersion spectrum (EDS), and UV-Visible diffuse reflectance spectroscopy (UV-Vis DRS). The photocatalytic properties of the as-prepared BiFeO₃ composites were evaluated according to degrading Rhodamine B (RhB) and desulfurization under visible light irradiation, with excellent photocatalytic degradation and desulfurization activity found. Moreover, the mechanism study of active free radicals in photocatalytic activity indicates that the h⁺ radical in holes was mainly responsible for synergistic catalytic efficacy in photocatalytic degradation.     

Visible light photocatalytic activity of BiVO4 particles with different morphologies

Bismuth vanadate (BiVO₄) particles with different morphologies were synthesized by a one-step hydrothermal process and their optical and photocatalytic properties were investigated. Their crystal structure and microstructures were characterized using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). XRD patterns demonstrate that the as-prepared samples are monoclinic cell. FESEM shows that BiVO₄ crystals can be fabricated in different morphologies by simply manipulating the reaction parameters of hydrothermal process. The UV–visible diffuse reflectance spectra (UV–vis DRS) reveal that the band gaps of BiVO₄ photocatalysts are about 2.07–2.21 eV. The as-prepared BiVO₄ photocatalysts exhibit higher photocatalytic activities in the degradation of rhodamine B (Rh B) under visible light irradiation (λ > 420 nm) compared with traditional N-doped TiO₂ (N-TiO₂). Furthermore, wheat like BiVO₄ sample reveals the highest photocatalytic activity. Up to 100% Rh B is decolorized after visible light irradiation for 180 min. The reason for the difference in the photocatalytic activities for BiVO₄ samples obtained at different conditions were systematically studied based on their shape, size and the variation of local structure.     

Enhancing the Photocatalytic Activity of Sr4Al14O25: Eu2+, Dy3+ Persistent Phosphors by Codoping with Bi3+ Ions

The photocatalytic activity of Bismuth‐codoped Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺ persistent phosphors is studied by monitoring the degradation of the blue methylene dye UV light irradiation. Powder phosphors are obtained by a combustion synthesis method and a postannealing process in reductive atmosphere. The XRD patterns show a single orthorhombic phase Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺, Bi³⁺ phosphors even at high Bismuth dopant concentrations of 12 mol%, suggesting that Bi ions are well incorporated into the host lattice. SEM micrographs show irregular micrograins with sizes in the range of 0.5–20 μm. The samples present an intense greenish‐blue fluorescence and persistent emissions at 495 nm, attributed to the 5d–4f allowed transitions of Eu²⁺. The fluorescence decreases as Bi concentration increases; that suggest bismuth‐induced traps formation that in turn quench the luminescence. The photocatalytic evaluation of the powders was studied under both 365 nm UV and solar irradiations. Sample with 12 mol% of Bi presented the best MB degradation activity; 310 min of solar irradiation allow 100% MB degradation, whereas only 62.49% MB degradation is achieved under UV irradiation. Our results suggest that codoping the persistent phosphors with Bi³⁺ can be an alternative to enhance their photocatalytic activity.     

Microwave-assisted synthesis of ZnO and its photocatalytic activity in degradation of CTAB

Nanosized zinc oxide (nano-ZnO) was prepared by a microwave irradiation method using zinc nitrate and triethanolamine as starting materials and distilled water as a solvent. The as-prepared powder was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The photocatalytic degradation of cetyltrimethylammonium bromide (CTAB) using the prepared material under UV irradiation was studied.The effects of ZnO dosage and initial pH on the photodegradation of CTAB were investigated. As the ZnO load increased, the CTAB degradation first increased and then decreased. The optimum ZnO dosage was 3 g L^–1. Photodegradation of CTAB is more efficient in slightly alkaline media (pH 9).     

Self-assembly and enhanced photocatalytic properties of BiOI hollow microspheres via a reactable ionic liquid

BiOI uniform flowerlike hollow microspheres with a hole in its surface structures have been successfully synthesized through an EG-assisted solvothermal process in the presence of ionic liquid 1-butyl-3-methylimidazolium iodine ([Bmim]I). The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), nitrogen sorption, and diffuse reflectance spectroscopy (DRS). A possible formation mechanism for the growth of hollow microspheres was discussed. During the reactive process, ionic liquid not only acted as solvents and templates but also as an I source for the fabrication of BiOI hollow microspheres and was vital for the structure of hollow microspheres. Additionally, we evaluated the photocatalytic activities of BiOI on the degradation of methyl orange (MO) under visible light irradiation and found that as-prepared BiOI hollow microspheres exhibited higher photocatalytic activity than BiOI nanoplates and TiO(2) (Degussa, P25) did. On the basis of such analysis, it can be assumed that the enhanced photocatalytic activities of BiOI hollow microspheres could be ascribed to its energy band structure, high BET surface area, high surface-to-volume ratios, and light absorbance.     

Surfactant assisted hydrothermal synthesis of SnO nanoparticles with enhanced photocatalytic activity

SnO nanoparticles have been successfully synthesized in the presence of Triton-X 100 (TX-100) surfactant via hydrothermal method for the first time, and the photocatalytic activity under UV and visible light irradiation for the degradation of Methylene Blue (MB) and Rhodamine B (RdB) organic textile dyes was investigated. The structural, morphological and chemical characterizations were investigated by using X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), selected area electron diffraction (SAED), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR), UV–vis. diffuse reflectance spectroscopy (UV–vis DRS) and photoluminescence (PL) analysis. The results reveal that the addition of surfactant, TX-100, in the precursor solutions leads to reduction in crystallite size with significant changes in morphological structure of SnO nanoparticles. The synthesized SnO nanoparticles show excellent photocatalytic activity under UV or visible light irradiation. MB and RdB dyes degraded completely under UV irradiation after 90 and 150 min, respectively. Also, MB and RdB dyes degraded only 150 min later under visible light illumination with a little amount of photocatalyst (0.8 g/L). Hence, this work explores the facile route to synthesizing efficient SnO nanoparticles for degrading organic compound under both UV and visible light irradiations.     

Photodegradation of rhodamine B over semiconductor supported gold nanoparticles: The effect of semiconductor support identity

Rhodamine B (RB) is a toxic dye used extensively in textile industry, which must be remediated before its drainage to environment. In the present study, supported gold nanoparticles on commercially available titania and zincite were successfully prepared and then their activity on the photodegradation of RB under UV A light irradiation was evaluated. The synthesized photocatalysts were characterized by ICP, BET, XRD, TEM and EDX. Kinetic results showed that Au/TiO₂ was a photocatalyst inferior to Au/ZnO. This observation could be attributed to the strong reflection of UV irradiation by gold nanoparticles over TiO₂ support.     

Novel synthesis of high-surface-area ordered mesoporous TiO2 with anatase framework for photocatalytic applications

Ordered mesoporous TiO₂ materials with an anatase frameworks have been synthesized by using a cationic surfactant cetyltrimethylammonium bromide (C₁₆TMABr) as a structure-directing agent and soluble peroxytitanates as Ti precursor through a self-assembly between the positive charged surfactant S⁺ and the negatively charged inorganic framework I^? (S⁺I^? type). The low-angle X-ray diffraction (XRD) pattern of the as-prepared mesoporous TiO₂ materials indicates a hexagonal mesostructure. XRD and transmission electron microscopy results and nitrogen adsorption–desorption isotherms measurements indicate that the calcined mesoporous TiO₂ possesses an anatase crystalline framework having a maximum pore size of 6.9 nm and a maximum Brunauer–Emmett–Teller specific surface area of 284 m² g^?1. This ordered mesoporous anatase TiO₂ also demonstrates a high photocatalytic activity for degradation of methylene blue under ultraviolet irradiation.     

Facile ion-exchange synthesis of Gd-doped K2Ta2O6 photocatalysts with enhanced visible light activity

One of the well-known ways of increasing the visible light absorption capability of semiconducting materials is cation doping. This study aims to use Gd doping to tailor the bandgap energy of K₂Ta₂O₆ (KTO) for photocatalytic degradation of organic pollutants under visible light irradiation. Accordingly, the parent KTO and Gd-doped KTO with different Gd concentrations (K_2-3xGd_xTa₂O₆; x = 0.025, 0.05, 0.075 and 0.1 mol%) were synthesized by hydrothermal and facile ion-exchange methods, respectively. The powder XRD, FT-IR, SEM-EDS, TEM-SAED, N₂ adsorption-desorption, XPS, UV–Vis DRS, PL and ESR techniques were used to investigate the effect of Gd dopant concentration on the structural and photocatalytic properties of KTO. The photocatalytic activity of these samples was investigated for the photocatalytic degradation of methylene blue (MB) dye in an aqueous solution at room temperature under visible light irradiation. The experimental results show that all Gd-doped KTO samples exhibit enhanced photocatalytic activity compared with parent KTO toward MB degradation. In particular, Gd-KTO obtained by doping of 0.075 mol% shows the highest photocatalytic activity among the Gd-doped samples and the degradation efficiency of MB was 79% after 180 min of visible light irradiation, which is approximately 1.5 times as high as that by parent KTO (53%). In addition, trapping experiments and electron spin resonance (ESR) analysis demonstrated that the hydroxyl radicals (^?OH) have played a crucial role in the photocatalytic degradation of MB. The reusability and stability of Gd doped-KTO with a Gd content of 0.075 mol% against MB degradation were examined for five cycles. Based on the present study results, a visible light induced photocatalytic mechanism has been proposed for Gd0075-KTO sample.     

Photocatalytic degradation of metoprolol in water suspension of TiO<Subscript>2</Subscript> nanopowders prepared using sol–gel route

Nanocrystalline titanium dioxide (TiO₂) powders have been synthesized by sol–gel method using titanium tetrachloride (TiCl₄) or tetrabutyl titanate (Ti(OC₄H₉)₄ as precursors, different alcohols and calcination temperatures in the range from 400 to 650 °C. The photocatalytic activity of as-prepared powders has been tested for the degradation of metoprolol tartrate salt, a selective β-blocker used to treat a variety of cardiovascular diseases, and compared to photocatalytic activity obtained from Degussa P25. Nanosized TiO₂ powders prepared from TiCl₄ and amyl-alcohol, calcined at 550 °C, displayed an activity comparable to Degussa P25, whereas the sample from the same series, calcined at 650 °C, showed higher photocatalytic activity in the whole range of the catalyst loading. Structural, morphological and surface properties of synthesized TiO₂ nanopowders have been investigated by XRD, SEM, EDS and BET measurements, as well as FTIR and Raman spectroscopy, in order to find out the material properties which enable rapid an efficient decomposition of metoprolol under UV radiation.     

One-step solvothermal synthesis of N-doped TiO2 nanoparticles with high photocatalytic activity in the reduction of aqueous Cr（Ⅵ）

N-doped TiO2 （N-TiO2） nanoparticles were synthesized via a one-step low temperature （180℃） solvothermal route, which adopted NH4NO3 as the nitrogen source. The structure, composition, BET specific surface area, and optical properties of the as-synthesized product were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, N2 adsorption- desorption isotherms, and UV-vis diffuse reflectance spectroscopy. In addition, its photocatalytic properties were tested by the reduction of aqueous Cr（VI） under UV and visible light （x 〉 420 rim） irradiation. It was observed that for the reduction of aqueous Cr（VI）, the as-synthesized N-TiO2 nanoparticles not only exhibited much higher photocatalytic activity than P25 TiO2 under UV light, but also exhibited remarkably high photocatalytic activity under visible light （λ 〉 420 nm）.     

Effect of nitrogen-doping temperature on the structure and photocatalytic activity of the B,N-doped TiO2

B,N-TiO₂ photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH₃ at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO₂ were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO₂ lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 °C. Higher temperature may form many oxygen vacancies and Ti³⁺ species, resulting in the decrease of photocatalytic activity in visible light.     

Facile synthesis and characterization of Fe2O3 nanoparticles using L-lysine and L-serine for efficient photocatalytic degradation of methylene blue dye

In this work, Fe₂O₃ nanoparticles, abbreviated as OL and OS, were facilely synthesized by the combustion procedure using L-lysine and L-serine as organic fuels, respectively. Also, the OL and OS samples were identified using different instruments such as Raman spectrometer, FT-IR spectrophotometer, UV–Vis spectrophotometer, XRD, HR-TEM, BET surface area, and FE-SEM. The XRD confirmed that the mean grain size of OL and OS samples is 42.23 and 33.16 nm, respectively. The HR-TEM images confirmed that irregular, hexagonal, and spherical shapes, have an average diameter of 39.13 and 34.28 nm, were observed in the OL and OS samples, respectively. The BET surface area of the OL and OS samples is 16.20 and 28.34 m²/g, respectively. Additionally, the OL and OS samples were accomplished for the photocatalytic degradation of methylene blue dye in the absence and presence of hydrogen peroxide. The % degradation of 45 mL of 25 mg/L of methylene blue dye in the case of using OL and OS samples in the absence of hydrogen peroxide is 55.23 and 63.64 % after 120 min, respectively. Also, in the presence of hydrogen peroxide, the % degradation in the case of using OL and OS samples is 100 % after 35 and 25 min, respectively.