Chalcogen-doped zinc oxide nanoparticles for photocatalytic degradation of Rhodamine B under the irradiation of ultraviolet light

In the present work, the chalcogen (Se²⁺)-doped ZnO nanoparticles (SeZO-NPs) were synthesized using sol-gel precipitation method and tested for photocatalytic degradation of Rhodamine B (RhB). X-ray diffraction pattern of SeZO-NPs showed the hexagonal wurtzite crystal structure regardless of Se concentration. The band edge and defect-level emissions of SeZO-NPs were determined by using the photoluminescence spectra with the excitation source of 370 nm. The bandgap, E_g, of SeZO-NPs was measured from diffused reflectance spectroscopy, which increased from 3.22 to 3.26 eV as Se concentration increased from 0 to 10 wt.%. The highest specific surface area and lowest pore size of 5-SeZO-NPs were observed to be 36.42 m²/g and 13.48 nm, respectively. The photocatalytic degradation of SeZO-NPs was measured under the illumination of ultraviolet (UV) light. The double donor (Se) played an important role toward photodegradation of RhB via reducing the recombination of charge carriers. The highest photocatalytic degradation (98.23%) and mineralization were achieved for the sample 5-SeZO (Se: 5 wt.%). The improved photocatalytic performance of 5-SeZO was attributed to the optimum Se dopant concentration for the production of more reactive oxygen species because of effective separation of charge carriers in UV light.     

Synthesis and characterization of CDs/Al2O3 nanofibers nanocomposite for Pb2+ ions adsorption and reuse for latent fingerprint detection

This study reports a new approach of preparation of carbon dots coated on aluminum oxide nanofibers (CDs/Al₂O₃NFs) nanocomposite and reusing the spent adsorbent of lead (Pb²⁺) ions loaded adsorbent (Pb²⁺-CDs/Al₂O₃NFs) nanocomposite for latent fingerprint detection (LFP) after removing Pb²⁺ ions from aqueous solution. CDs/Al₂O₃NFs nanocomposite was prepared by using CDs and Al₂O₃NFs with adsorption processes. The prepared nanocomposite was then characterized by using UV–visible spectroscopy (UV–visible), Fourier transforms infrared spectroscopy (FTIR), Fluorescence, X-ray diffraction pattern (XRD), scanning electron microscope (SEM), Transmission electron microscopy (TEM), Energy-dispersive X-ray spectroscopy (EDS), Zeta potential, X-ray photoelectron spectroscopy (XPS). The average size of the CDs was 51.18 nm. The synthesized CDs/Al₂O₃NFs nanocomposite has proven to be a good adsorbent for Pb²⁺ ions removal from water with optimum pH 6, dosage 0. 2 g/L. The results were best described by the Freundlich Isotherm model. The adsorption capacity of CDs/Al₂O₃NFs nanocomposite showed the best removal of Pb²⁺ ions with q_m = (177. 83 mg/g), when compared to the previous reports. This adsorption followed the pseudo-second order kinetic model. ΔG and ΔH values indicated spontaneity and the endothermic nature of the adsorption process. CDs/Al₂O₃NFs nanocomposite therefore showed potential as an effective adsorbent. The data were observed from adsorption–desorption after 6 cycles which showed good adsorption stability and re- usability of CDs/Al₂O₃NFs nanocomposite. Furthermore, the spent adsorbent of Pb²⁺-CDs/Al₂O₃NFs nanocomposite has proven to be sensitive and selective for LFP detection on various porous substrates. Hence Pb²⁺-CDs/Al₂O₃NFs nanocomposite can be reused as a good fingerprint labelling agent in LFP detection so as to avoid secondary environmental pollution by disposal of the spent adsorbent.     

One-dimensional porous Ag/AgBr/TiO<Subscript>2</Subscript> nanofibres with enhanced visible light photocatalytic activity

One-dimensional (1D) Ag/AgBr/TiO₂ nanofibres (NFs) have been successfully fabricated by the one-pot electrospinning method. In comparison with bare TiO₂ NFs and Ag/AgBr/PVP (polyvinylpyrrolidone) NFs, the 1D Ag/AgBr/TiO₂ NFs photocatalyst exhibits much higher photocatalytic activity in the degradation of a commonly used dye, methylene blue (MB), under visible light. The photocatalytic removal efficiency of MB over Ag/AgBr/TiO₂ NFs achieves almost 100 % in 20 min. The photocatalytic reaction follows the first-order kinetics and the rate constant (k) for the degradation of MB by Ag/AgBr/TiO₂ NFs is 5.2 times and 6.6 times that of Ag/AgBr/PVP NFs and TiO₂ NFs, respectively. The enhanced photocatalytic activity is ascribed to the stronger visible light absorption, more effective separation of photogenerated electron-hole pairs, and faster charge transfer in the long nanofibrous structure. The Ag/AgBr/TiO₂ NFs maintain a highly stable photocatalytic activity due to its good structural stability and the self-stability system of Ag/AgBr. The mechanisms for photocatalysis associated with Ag/AgBr/TiO₂ NFs are proposed. The degradation of MB in the presence of scavengers reveals that h⁺ and ^?O ₂ ^? significantly contribute to the degradation of MB.     

Enhanced photocatalytic performance of magnetite/TS-1 thin film for phenol degradation

Photocatalytic degradation method is an emerging technique for complete removal of pollutants. Several semiconductor photocatalysts are reported as photocatalysts for industrial wastewater treatment in environmental applications. In this study Magnetite/TS-1 composite materials was used for photocatalytic degradation of phenol. Magnetite nanoparticles (MNP) (10 wt%) were dispersed with nanocrystalline Titanium Silicate-1 zeolite (TS-1). The Magnetite/TS-1 composite materials were characterized with various techniques. The structural analysis reveals the presence of MNP and zeolite-MFI phases in Magnetite/TS-1 composite materials. The average particles size of the magnetite nanoparticles is less than 5 nm and that of the composite nanoparticles are in the range of about 90 nm with micropore volume 0.110 cm³/g and the external surface area 120 m²/g. The photocatalytic experiments were carried out in a thin film flow photoreactor under UV radiation. The results showed that Magnetite/TS-1 composite materials exhibited improved activity for the degradation of phenol compared to TS-1. Preliminary studies proves that aeration is necessary for the photocatalytic reaction. The reaction parameters such as flow rate, pH and phenol concentration are optimized as 8 ml/min, pH 7.0 and 75 mg/L respectively. To understand the active species involved in the degradation of phenol radical scavengers such as NaI, benzoquinone and isopropyl alcohol are used to trap hole (h⁺), superoxide anion radical and hydroxyl radical (OH), respectively. From the obtained results it is envisaged that hydroxyl radicals are predominantly involved in complete oxidation of phenol. The extent of degradation of phenol was determined by measuring the amount of CO₂ formed in the reaction. The results confirms that 99.6 % carbon in phenol is converted to CO₂.     

The effect of silver doping on photocatalytic properties of titania multilayer membranes

In this investigation an Ag doped titania multilayer membrane is successfully fabricated via the sol–gel processing method. The doped membrane is characterized via X-ray Diffraction and N₂-sorption techniques and the photocatalytic properties of the membrane are investigated via methyl orange degradation. The properties included high surface area (101 m²/g), small pore size (3.1 nm), and active anatase crystal phase. The prepared titania membrane has a high photocatalytic activity and decomposes methyl orange by 50% after 9 h of UV irradiation. The prepared membrane can be applied in the development of efficient photocatalytic systems for the treatment of water. Due to the high photoactivity of the prepared titania membrane, this study reveals the possibility of combining two processes for removal of organic pollutants: the photocatalytic process and the membrane separation process. In the combining process the lifetime of the membrane increases and the quality of water is enhanced.     

Synthesis of solar light driven nanorod-zinc oxide for degradation of rhodamine B,industrial effluent and contaminated river water

Surface water contamination by various dyes and pigments is a global problem caused by rapid industry, particularly textile/dyeing. Bangladesh's export-oriented textile sector has exploded in recent decades, polluting local waterways significantly. In this study, nano-ZnO were prepared using surfactant-assisted sol–gel, hydrothermal and thermal methods. SEM, XRD, reflectance spectrophotometer, EDS and adsorption tests were used to characterize the synthesized nano-ZnO. BET isotherms were used to determine the surface area, pore volume, and pore size of the as-prepared nano-ZnO. The mixed surfactant assisted-sol gel method produced nanorod-ZnO, whereas the hydrothermal and/or thermal methods yielded clusters of needles ZnO, as proven by SEM images. XRD data revealed that the synthesized nanorod-ZnO had a mainly wurtzite crystalline structure and their size was estimated using the Scherrer equation to be about 23.90 nm. EDS spectra confirmed the synthesis of pure nanorod-ZnO. Using a UV–visible reflectance spectrophotometer, the band gap energy of the as-prepared nanorod-ZnO was found to be 3.35 eV. According to BET isotherms, the BET and Langmuir surface areas were 4 and 5.4 m²/g, respectively. Prior to analyzing photodegradation, the RB was adsorbing in the presence of various doses of the nanorod-ZnO in the dark, but no adsorption was observed. The photocatalytic activities of the synthesized nano-ZnO were compared to TiO₂ (anatase) for the degradation of RB in an aqueous system under solar light, UV, fluorescence, and tungsten filament light irradiation. Nanorod-ZnO showed exceptional photocatalytic activity in degrading RB in an aqueous solution under solar light irradiation. The results suggest that 0.01 g/50 mL nanorod-ZnO with a solution pH of 7.8 is the best combination for complete degradation of 2.00 × 10^-5 M RB under solar light irradiation. When nano-ZnO was exposed to light, the inhibiting effect of ethanol and/or tert-butanol on the degradation of RB confirmed the formation of mostly hydroxyl free radicals. The synthesized nanorod-ZnO shown substantial photocatalytic activity in the removal of pollutants from industrial effluents and contaminated river water under solar light irradiation. A mechanism of excellent photocatalytic activity of the nanorod-ZnO is discussed.     

Effective synthesis of nanoscale anatase TiO2 single crystals using activated carbon template to enhance the photodegradation of crystal violet

Nanoscale anatase TiO₂ single crystals were successfully synthesized using three kinds of activated carbon (AC) templates through a simple sol–gel method. The optimal photocatalyst (T‐WOAC) was obtained using wood‐based AC template. X‐ray diffraction, transmission electron microscopy and Brunauer–Emmett–Teller analyses revealed that T‐WOAC possessed a small crystallite size of 8.7 nm and a clear mesoporous structure. The photocatalytic properties of samples were then evaluated through photodegradation of crystal violet (CV). Results implied that the photocatalysts prepared using the AC templates exhibited superior photocatalytic activity to that of the original TiO₂. This enhancement may be due to the small crystallite size, large specific surface area and pore volume of the catalysts prepared with ACs. T‐WOAC showed high photocatalytic activity, CV degradation of 99.01% after 120 min of irradiation and k = 0.03914 min^?1, which is 3.9 times higher than that of the original TiO₂ (k = 0.00994 min^?1). This result can be mainly attributed to the application of WOAC with moderate specific surface area and pore volume to produce T‐WOAC. Alkaline conditions benefitted the photodegradation of CV over photocatalysts. This work proposes a possible degradation mechanism of CV and indicates that the fabricated photocatalysts can be used to effectively remove CV from aqueous solutions.     

Electrospun TiO2 nanofibers coated with polydopamine for enhanced sunlight-driven photocatalytic degradation of cationic dyes

Controlled polydopamine (PDA)-coated TiO₂ composite nanofibers (NFs) were successfully fabricated via a facile electrospinning process and exposing TiO₂ NFs into a slightly alkaline dopamine solution. Chemical composition, structural morphology, and photocatalytic degradation property of as-prepared TiO₂ NFs and PDA-coated TiO₂ composite NFs were characterized by Fourier transfer infrared, X-ray photoelectron spectra, transmission electron microscopy, UV-vis diffuse reflectance spectra, and photocatalytic degradation experiments. The results indicated that the core-shell TiO₂@PDA composite NFs were successfully prepared and the thickness of PDA shell was highly controlled within several nanometers. And obtained TiO₂@PDA composite NFs exhibited improved photocatalytic performance after PDA coating, which is attributed to the photosensitization of PDA shell. Moreover, with increased pH values of initial solution, both absorption capacity in the dark and photocatalytic performance of TiO₂@PDA composite NFs showed significant improvement. Additionally, the obtained composite NFs showed different degrees of enhancement in photocatalytic performance based on different dyes, which is related to the “bait” effect of PDA shell. Comparing with anionic dyes, TiO₂@PDA composite NFs tended to adsorb and degrade more cationic dye molecules. It is anticipated that the fabricated composite NFs with controlled core-shell structure have great potential to be applied for organic pollutants removal, especially cationic dyes.     

Facile synthesis and characterization of copper oxalate/cobalt oxalate/manganese oxalate and copper oxide/cobalt manganese oxide/manganese oxide as new nanocomposites for efficient photocatalytic degradation of malachite green dye

Scientists seek to synthesize new catalysts with simple methods to treat water pollution from organic dyes using photocatalytic degradation technology. In this technology, when light falls on the catalyst, the produced hydroxyl free radicals convert the dye into non-toxic gases such as CO₂ and H₂O. So, in this work, copper oxalate/cobalt oxalate/manganese oxalate (Abbreviated as P₁) and copper oxide/cobalt manganese oxide/manganese oxide (Abbreviated as P₂) new nanocomposites were fabricated via precipitation of Cu²⁺/Co²⁺/Mn²⁺ solution using oxalic acid and ignition of precipitate at 550 °C for 4 hrs, respectively. Some tools, involving X-ray diffraction (XRD), UV–vis spectrophotometer, energy dispersive X-ray spectroscopy (EDX), nitrogen gas sorption analyzer, transmission electron microscope (TEM), and field emission scanning electron microscope (FE-SEM), were used for characterizing the fabricated nanocomposites. The EDX spectra confirmed that the P₁ composite consist of C (26.28 %), oxygen (46.66 %), manganese (7.27 %), cobalt (7.59 %), and copper (12.20 %). Also, the P₂ composite consist of oxygen (8.23 %), manganese (31.34 %), cobalt (27.19 %), and copper (33.24 %). A transmission electron microscope shows that the P₁ and P₂ composites consist of polyhedral and spherical shapes with an average diameter of 28.13 and 14.37 nm, respectively. The BET surface area, average pore size, and total pore volume of the P₁ composite are 29.0725 m²/g, 2.0749 nm, and 0.0302 cc/g, respectively. Besides, the BET surface area, average pore size, and total pore volume of the P₂ composite are 58.1088 m²/g, 1.6087 nm, 0.0467 cc/g, respectively. 60 mg of the synthesized nanocomposites completely decompose 60 mL of 15 mg/L of malachite green dye solution within 20 min in the presence of hydrogen peroxide and UV light. The synthesized catalysts outperformed many other catalysts published in previous studies.     

One-step conversion of Mg2Si into hydrogen-terminated porous silicon nanostructures

A simple, fast, and low-cost acid-treatment method is proposed for the conversion of magnesium silicide (Mg₂Si) into hydrogen-terminated mesoporous silicon nanostructured material (M-pSi). The formation of porosity in M-pSi is attributed to the generation of gas species during the acid treatment, providing a large number of active sites. The adsorption and the photocatalytic performances of M-pSi toward the degradation of methyl orange are investigated. It is found that the mesoporous Si material exhibits an unusual and high photocatalytic ability toward the dye degradation in acidic conditions, outperforming the performance of commercially available Si nanoparticles. This unusual photocatalytic performance is related to the presence of hydrogen-terminated silicon nanostructures with a high surface area of 203 m²/g. The article proposes an alternative way of producing porous silicon materials with enhanced photocatalytic activity.     

Preparation of nanocrystalline Fe-doped TiO<Subscript>2</Subscript> powders as a visible-light-responsive photocatalyst

Nanocrystalline Fe-doped TiO₂ powders were prepared using TiOSO₄, urea, and Fe(NO₃)₃ · 9H₂O as precursors through a hydrothermal method. The as-synthesized yellowish-colored powders are composed of anatase TiO₂, identified by X-ray diffraction (XRD). The grain size ranged from 9.7 to 12.1 nm, calculated by Scherrer’s method. The specific surface area ranged from 141 to 170 m²/g, obtained by the Brunauer–Emmett–Teller (BET) method. The transmission electron microscopy (TEM) micrograph of the sample shows that the diameter of the grains is uniformly distributed at about 10 nm, which is consistent with that calculated by Scherrer’s method. Fe³⁺ and Fe²⁺ have been detected on the surface of TiO₂ powders by X-ray photoelectron spectroscopy (XPS). The UV–Vis diffuse reflection spectra indicate that the light absorption thresholds of the Fe-doped TiO₂ powders have been red-shifted into the visible light region. The photocatalytic activity of the Fe-doped TiO₂ was evaluated through the degradation of methylene blue (MB) under visible light irradiation. The Fe-doped TiO₂ powders have shown good visible-light photocatalytic activities and the maximum degradation ratio is achieved within 4.5 h.     

Silica–titania aerogel monoliths with large pore volume and surface area by ambient pressure drying

Ambient pressure drying has been carried out for the synthesis of silica–titania aerogel monoliths. The prepared aerogels show densities in the range 0.34–0.38 g/cm³. The surface area and pore volume of these mixed oxide aerogels are comparable to those of the supercritically dried ones. The surface area for 5wt% titania aerogel has been found to be as high as 685 m²/g with a pore volume of 2.34 cm³/g and the 10wt% titania aerogel has a surface area of 620 m²/g with a pore volume of 2.36 cm³/g. Some gels were also made hydrophobic by a surface treatment with methyltrimethoxysilane and trimethylchlorosilane. The surface modified aerogels possess high surface areas in the range of 540–640 m²/g, and are thermally stable in terms of retaining hydrophobicity up to a temperature of 520 °C. The pore size distribution of the aerogels clearly indicates the preservation of the aerogel structure. High Resolution Transmission Electron microscopy has been employed to characterise the aerogels and Fourier Transform infrared spectroscopy to study the effect of titania addition to silica and the surface modification. X-ray diffraction patterns were recorded to verify the molecular homogeneity of the aerogel.     

Facile one-pot hydrothermal synthesis of B/N-codoped TiO2 hollow spheres with enhanced visible-light photocatalytic activity and photoelectrochemical property

B/N-codoped TiO₂ hollow spheres (B/N-THs) were synthesized by facile one-pot hydrothermal method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption isotherms, UV–vis diffuse reflectance spectrum (DRS) and X-ray photoelectron spectroscopy (XPS). The B/N-THs have large surface areas (up to 172.1 m² g⁻¹). The photocatalytic activities of as-prepared THs were evaluated by degradation of Reactive Brilliant Red dye X-3B solution under visible light irradiation. The results showed that B/N-THs exhibited the highest photocatalytic activity due to their high surface area and synergetic effect of B/N-codoped. A photocurrent–time spectrum was examined by anodic photocurrent response to characterize the electron-transferring efficiency in the process of photocatalysis reaction.     

Jute stick extract assisted hydrothermal synthesis of zinc oxide nanoflakes and their enhanced photocatalytic and antibacterial efficacy

In this paper, we used green and hydrothermal methodology to prepare zinc oxide (ZnO) nanoflakes (NFs) with jute stick extract (J–ZnO NFs) as growth substrate. The prepared materials were characterized using different analytical techniques including ultraviolet–visible spectroscopy (UV–vis), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The characteristic absorption peak for ZnO NFs and J–ZnO NFs were observed from the UV–vis spectrum at 373 and 368 nm respectively. The hexagonal wurtzite crystal structure of ZnO NFs and J–ZnO NFs was confirmed by XRD analysis. FESEM and TEM analyses of synthesized J–ZnO NFs confirmed their NFs shape and collectively flower-like structure formation by the assembly of NFs of J–ZnO on cellulose of jute stick extract substrate. The FTIR analysis revealed the functional groups of jute stick extract biomolecules, mainly cellulose, are responsible for the formation of collectivel flower like J–ZnO NFs structure. The XPS analysis revealed the surface and chemical compositions (Zn, C, and O) of J–ZnO NFs. The photocatalytic performance of ZnO NFs and J–ZnO NFs samples was carried out by the degradation of methylene blue (MB) dye solution under UV light irradiation. The degradation efficiency of ZnO NFs and J–ZnO NFs was obtained 79 % and 89 %, respectively, for 5 h. Notably, the degradation efficiency of the J–ZnO NFs was 98 % after 8 h of irradiation, which is very inspiring. The both NFs exhibited first-order kinetics with MB photodegradation. We also examined the possible antibacterial activity of both samples against Escherichia coli (E. coli) pathogens, which demonstrated a significant result with a 17 mm and 19 mm zone of inhibition by ZnO NFs and J–ZnO NFs respectively.     

Fabrication of titania and titania–silica aerogels using rapid supercritical extraction

Titania (TiO₂) and titania–silica (TiSi) aerogels are suitable for photocatalytic oxidation of volatile organic compounds for pollution mitigation; however, methods for fabricating these aerogels can be complex. In this work we describe the use of a rapid supercritical extraction (RSCE) technique to prepare TiO₂ and TiSi aerogels in as little as 8 h. The RSCE technique uses a metal mold and a four-step hydraulic hot press procedure to bring the solvents in the sol–gel pores to a supercritical state and control the supercritical fluid release process. Resulting TiO₂ aerogels were powdery with BET surface areas of 130–180 m²/g, pore volumes ~0.5 cm³/g and skeletal densities of 3.6 g/mL. Monolithic TiSi aerogels were made using two different methods. An impregnation process, in which titania precursor was added to a silica sol–gel, took 4–8 days to complete with a 7-h RSCE and resulted in translucent aerogels with high surface area (560–650 m²/g) and pore volume (2.0–2.6 cm³/g), bulk densities ranging from 0.1 to 0.4 g/mL and skeletal densities of 2.3 g/mL. A co-precursor method for preparing TiSi aerogels took 8 h to complete. The precursor chemical mixture was poured directly into the mold and processed in a 7-h RSCE process. The resulting aerogels were opaque, with high surface areas (510–580 m²/g), low bulk density (0.03 g/mL), skeletal densities of 2 g/mL and pore volumes of 2.6–3.5 cm³/g. Preliminary solar simulator studies show that TiO₂ and TiSi aerogels are capable of photocatalytic degradation of methylene blue in aqueous solution.     

Preparation of nanocrystalline TiO<Subscript>2</Subscript> powders for photocatalytic oxidation of phenol

Nanocrystalline TiO₂ powders in the anatase, rutile, and mixed phases prepared by hydrolysis of TiCl₄ solution were of ultrafine size (<7.2 nm) with high specific surface areas in the range 167 to 388 m²/g. In the photocatalytic degradation of phenol as model reaction, the photocatalytic properties of TiO₂ nanoparticles were evaluated by use of UV–vis absorption spectroscopy and total organic carbon (TOC) content. The synthetic mixed-phase TiO₂ powder calcined at 400 °C had higher activity than pure anatase or rutile; it degraded more than 90% phenol to CO₂ (evaluated by TOC) after irradiation with near UV light for 90 min at a catalyst loading of 0.4 g/L. The TOC results indicated that rutile TiO₂ crystallites of particle size 7.2 nm resulted in much better photocatalytic performance than particles of larger size. This result suggested that some intermediates, not determined by UV–vis absorption spectroscopy, existed in the solution after the photocatalytic process over the rutile TiO₂ photocatalysts of larger crystallite size.     

Photocatalytic properties of CoOx-loaded nano-crystalline perovskite oxynitrides ABO2N (A = Ca,Sr, Ba,La; B = Nb,Ta)

Highly crystalline niobium- and tantalum-based oxynitride perovskite nanoparticles were obtained from hydrothermally synthesized oxide precursors by thermal ammonolysis at different temperatures. The samples were studied with respect to their morphological, optical and thermal properties as well as their photocatalytic activity in the decomposition of methyl orange. Phase pure oxynitrides were obtained at rather low ammonolysis temperatures between 740 °C (CaNbO₂N) and 1000 °C (BaTaO₂N). Particle sizes were found to be in the range 27 nm–146 nm and large specific surface areas up to 37 m² g⁻¹ were observed. High photocatalytic activities were found for CaNbO₂N and SrNbO₂N prepared at low ammonolysis temperatures. CoO_x as co-catalyst was loaded on the oxynitride particles resulting in a strong increase of the photocatalytic activities up to 30% methyl orange degradation within 3 h for SrNbO₂N:CoO_x.     

Catalytic degradation of gaseous benzene by using TiO2/goethite immobilized on palygorskite: Preparation,characterization and mechanism

The nano-TiO₂/goethite/palygorskite catalysts were prepared by sol–gel method. The morphology and structure of the catalysts were analyzed by X-ray diffraction (XRD), UV–Vis reflection spectrometer, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and N₂ adsorption-desorption measurement. The results indicated that the self-made catalysts had excellent catalytic performance on gaseous benzene degradation. In the case of benzene concentration at 30 mg/m³, the degradation efficiency, over TiO₂/goethite/palygorskite composite with mass ratio of 10:5:5, reached 70.4% after 180 min 254 nm UV irradiation. The reaction mechanism and kinetics study showed that palygorskite/goethite/TiO₂ composites photocatalytic degradation benzene was mainly caused by oxidizing property of electron–holes and oxygen synergy effect.     

Biosynthesis of zinc oxide nanoparticles using Euphorbia milii leaf constituents: Characterization and improved photocatalytic degradation of methylene blue dye under natural sunlight

A facile biosynthesis route was followed to prepare zinc oxide nanoparticles (ZnO NPs) using Euphorbia milii (E. milii) leaf constituents. The SEM images exhibited presence of spherical ZnO NPs and the corresponding TEM images disclosed monodisperse nature of the ZnO NPs with diameter ranges between 12 and 20 nm. The Brunauer–Emmett–Teller (BET) analysis revealed that the ZnO NPs have specific surface area of 20.46 m²/g with pore diameter of 2 nm–10 nm and pore volume of 0.908 cm³/g. The EDAX spectrum exemplified the existence of Zn and O elements and non-appearance of impurities that confirmed pristine nature of the ZnO NPs. The XRD pattern indicated crystalline peaks corresponding to hexagonal wurtzite structured ZnO with an average crystallite size of 16.11 nm. The FTIR spectrum displayed strong absorption bands at 512 and 534 cm^?1 related to ZnO. The photocatalytic action of ZnO NPs exhibited noteworthy degradation of methylene blue dye under natural sunlight illumination. The maximum degradation efficiency achieved was 98.17% at an illumination period of 50 min. The reusability study proved considerable photostability of the ZnO NPs during photocatalytic experiments. These findings suggest that the E. milii leaf constituents can be utilized as suitable biological source to synthesis ZnO NPs for photocatalytic applications.