顶空气相色谱法测定烟用胶中残余单体

采用顶空气相色谱(HS-GC)法对卷烟用胶中甲基丙烯酸甲酯、甲基丙烯酸乙酯、甲基丙烯酸丁酯、丙烯酸甲酯、丙烯酸乙酯、丙烯酸丁酯和乙酸乙烯酯7种残余单体进行了分析。方法采用DB-VRX石英弹性毛细管色谱柱分离,氢火焰离子化检测器检测。7种单体能够完全分离,线性良好,线性相关系数在0.9985～0.9992之间,检测限在0.0030～0.0039mg/mL范围,相对标准偏差(RSD)小于1.92%。该方法操作简便、快速、高效、准确、灵敏度高,实用性强,可用于胶粘剂中残余单体的测定。     

Photoinduced miniemulsion polymerization

This study describes the radical photopolymerization of acrylate monomers in miniemulsion. Starting from nanosized acrylate droplets (<100 nm) which encapsulate a type I radical photoinitiator (BAPO), UV irradiation led after a few minutes to the formation of polymer nanoparticles of similar size. The present study deals with the kinetics aspects of this reaction and the colloidal properties of the resulting polymer dispersions. Real-time Fourier transform near-infrared spectroscopy in transmission was implemented to follow continuously the fast photopolymerization process. In addition, the spatial resolution of the photoinduced process allowed the online monitoring of the evolution of the miniemulsion size during the UV irradiation through dynamic light scattering.     

高效液相色谱法测定聚合物水处理剂中残留的单体

建立了采用高效液相色谱测定聚环氧琥珀酸钠盐(PESA)、丙烯酸/马来酸酐二元共聚物(AA/MA)、聚丙烯酸盐(PAA)、水解聚马来酸钠盐(HPMA)、马来酸酐/丙烯酸/丙烯酸甲酯三元共聚物(MA/AA/MAc)5类聚合物水处理剂中残留单体的方法。以Agilent ZORBAX 300SB-C18柱(5 μm,150 mm×4.6 mm)为分析柱,柱温为30 ℃,流动相为0.01 mol/L KH2PO4溶液(用5%H3PO4调节pH为2.3)-甲醇(体积比为95∶5)进行等度洗脱,检测波长为210 nm,流速为0.6 mL/min,样品用流动相稀释过滤后直接进样分析,10 min内马来酸、富马酸及丙烯酸残留单体获得分离和定量。上述3种残留单体的检出限分别为0.5,0.5和0.2 mg/L,回收率为98.9%～103.7%,相对标准偏差为1.09%～1.69%,相关系数为0.9996～0.9999。实验结果表明,该法简便快速、灵敏可靠,适用于5类聚合物水处理剂中残留单体的测定。     

Determination of residual (free) monomer in water based polymer emulsions by head space gas chromatography mass spectrometry

A method for determination of residual acrylonitrile, methyl acrylate, ethyl acrylate, methyl methacrylate, ethyl methacrylate, butyl acrylate, butyl methacrylate, 2-ethyl hexyl acrylate, styrene and 2-methyl styrene monomers in polymer emulsions by head space gas chromatography mass spectrometry. Monomers were separated on DB-624 column and detected by MS under SIM (Selected ion monitoring) mode. The linear regression analysis data for the calibration curve for all monomers showed a good linear relationship with a regression coefficient of 0.99 over the concentration range of 5.3 mg/kg to 1172 mg/kg. The limit of detection and limit of quantification for the target analytes were in the range from 0.4 to 2.9 mg/kg and 0.9 to 7.3 mg/kg respectively.     

Properties of acrylic–polyurethane hybrid emulsions synthesized by the semibatch emulsion copolymerization of acrylates using different polyurethane particles

Aqueous acrylic–polyurethane hybrid emulsions were prepared by the semibatch emulsion copolymerization of methyl methacrylate and butyl acrylate in the presence of eight polyurethane dispersions. The polyurethane dispersions were synthesized with isophorone diisocyanate, 1000 and 2000 molecular weight polyester polyols, 1000 molecular weight polyether polyol, butanediol, and dimethylol propionic acid. Acrylic monomers were added in the monomer emulsion feed. We studied the effect of the use of different polyurethane seed particles and the effect of different weight ratios of methyl methacrylate to butyl acrylate on the emulsion properties, microphase structure, and mechanical properties of hybrid films. The average particle size and distribution were determined by photon correlation spectroscopy. The rheological properties of polyurethane dispersions and hybrid emulsions were tested under destructive conditions by an examination of flow curves and under nondestructive conditions of oscillatory shear in a range of linear viscoelastic responses. Differential scanning calorimetry was performed to characterize the thermal‐response properties of polymeric films. The relative average molecular weights were determined by gel permeation chromatography. The interactions between the acrylic and polyurethane components in hybrid particles and particle structure were studied with infrared spectroscopy and nuclear magnetic resonance spectroscopy. Mechanical properties such as the Koenig hardness, tensile strength, elongation at break, and Young's modulus were measured. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4050–4069, 2005     

微波辅助萃取-气相色谱质谱法测定丙烯酸树脂中9种残余单体

建立了丙烯酸树脂中9种残余单体(丙烯酸甲酯、丙烯酸乙酯、甲基丙烯酸甲酯、甲基丙烯酸乙酯、丙烯酸丁酯、甲基丙烯酸丁酯、苯乙烯、丙烯酸、甲基丙烯酸)的微波辅助萃取-气相色谱-质谱检测方法。固体丙烯酸树脂样品用乙酸乙酯微波萃取后加甲醇沉淀(液态丙烯酸树脂样品直接用甲醇稀释)后,采用DB-WAX毛细管柱分离。结果表明,本方法在20 min内同时分离了9种单体,所测物质的定量限(LOQ,以信噪比为10计)为3～50 mg/kg(固体树脂)和1～10 mg/kg(液态树脂);在1～500 mg/L范围内,线性相关系数均在0.995以上;在5个添加水平下平均回收率为84.4%～108.6%,相对标准偏差(n=6)为0.27%～4.97%。方法的灵敏度和回收率高、选择性好,能满足实际工作的要求。     

Ultraviolet-curable epoxy acrylate dispersions: effect of urethane acrylate anionomers on stabilizing and film properties

 Epoxy acrylate dispersions stabilized using urethane acrylate anionomers were prepared for an application of ultraviolet (UV) curing. By observing the optical microscopy and colloidal stability for the epoxy acrylate dispersions, it was confirmed that the urethane acrylate anionomers incorporated have an interfacial activity in the interface between the epoxy acrylate oil and the water/ ethanol mixture (80/20, w/w). This was possible by the structurally designed urethane acrylate anionomers, containing a hydrophobic soft segment and two hydrophilic ionic sites in their molecules. In addition, when ultraviolet (UV)-cured, the urethane acrylate anionomers agglomerated to form the rubber domains in the epoxy acrylate film, which were induced by the ionic interaction. Consequently, this agglomerated rubber domains improved the final film properties. Received: 4 April 1998 Accepted: 1 July 1998     

含烯丙基六苯氧基环三磷腈的合成及其在阻燃丙烯酸酯树脂中的应用

以六氯环三磷腈（HCCP）、苯酚和2-烯丙基苯酚为原料,合成了新型含烯丙基的环磷腈阻燃单体（2-烯丙基苯氧基）五苯氧基环三磷腈（APPCP),用红外光谱、核磁氢谱、质谱和元素分析表征其组成和结构。 将APPCP与丙烯酸酯单体共聚制备了阻燃丙烯酸酯树脂,测试了共聚丙烯酸酯树脂的热稳定性和阻燃性,当APPCP用量为20%时,共聚丙烯酸酯树脂燃烧等级（UL-94）可达V-0级,极限氧指数（LOI）高达31.2%,在空气中600 ℃时残留质量提高至23.2%。     

顶空气相色谱-质谱联用法测定胶粘剂中的残余单体

建立了一种测定胶黏剂中6种丙烯酸酯和甲基丙烯酸酯类残余单体的分析方法。样品经100 ℃、30 min顶空加热后,通过DB-WAX色谱柱(30 m×0.25 mm×0.25 μm)分离和质谱选择离子模式检测,内标法定量。结果表明,6种残余单体能达到良好的分离,检出限(信噪比为3)为0.069～0.096 mg/kg,定量限(信噪比为10)为0.23～0.32 mg/kg,平均回收率为96.0%～104.6%,相对标准偏差(RSD)小于7.2%。该方法操作简便、准确、重复性好、灵敏度高,可用于胶黏剂中丙烯酸酯和甲基丙烯酸酯类残余单体的快速测定。     

Thermal degradation of copolymers of methyl methacrylate and methyl acrylate. I. Products and general characteristics of the reaction

The technique of thermal volatilization analysis (TVA), applied to methyl methacrylate–methyl acrylate copolymers having molar composition ratios 112/1, 26/1, 7.7/1, and 2/1, has demonstrated that the stabilization of poly(methyl methacrylate) by copolymerized methyl acrylate is due to inhibition of the depolymerization initiated at terminally unsaturated structures, probably by direct blockage by methyl acrylate units. The molecular weight of the copolymers decreases rapidly during degradation, suggesting that a random scission process is involved. The products of degradation consist of the monomers, carbon dioxide, chain fragments larger than monomer, and a permanent gas fraction which is principally hydrogen. Infrared and ultraviolet spectral measurements suggest that the residual polymer, which is colored, incorporates carbon–carbon unsaturation. The complete absence of methanol among the products is surprising in view of its abundance among the products of degradation of poly(methyl acrylate). These observations have been accounted for qualitatively in terms of acceptable polymer behavior.     

Ternary microemulsions of vinylic and acrylic monomers

Ternary systems consisting of sodium dodecyl sulfate (SDS) as surfactant, water and several vinyl and acrylic monomers [vinyl acetate (VAc), acrylonitrile (ACN), ethyl acrylate (EtA), butyl acrylate (BuA), 2-ethylhexyl acrylate (EHA), methyl methacrylate (MMA), butyl methacrylate (MMB) and styrene (St)] were studied. The solubilization of monomer in aqueous solutions of SDS was found to be dependent on its structure and concentration. The molar specific solubility was observed to decrease with hydrophobicity and increase with polarity of monomer, that is, it was lowest for St, EHA and highest for MMA, EtA. The NMR and fluorescence studies indicate that solubilization occurred at a different domain of the interfacial layer. The hydrophobic monomers are solubilized toward the hydrocarbon interior of the micelles whereas the hydrophilic ones, toward the hydrated tail of the surfactant. The penetration of monomers into the oil-in-water interface is limited because the screening of charged ions of emulsifier is not operative. A relationship between the persulfate initiator decomposition rate and the lability of the α-hydrogen linked to the substituted carbon of the double bond was established. The initiator productivity was the highest for MMA (lacking such α-hydrogen) and the lowest for VAc and St, the monomers in which the C-H_α bond is the most reactive.     

Preparation of PTBA‐PAA‐PMMA Compatibilizer for PET‐PMMA Blends by Atom Transfer Radical Polymerization

The synthesis of diblock copolymer of tert butyl acrylate and methyl methacrylate (PTBA‐b‐PMMA) was prepared by Atom Transfer Radical Polymerization (ATRP). At the outset, macroinitiator of tert butyl acrylate (TBA) was prepared by using N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) ligand, Cuprous Bromide (CuBr) catalyst, and ethyl 2‐bromo isobutyrate (2‐EiBBr) initiator. Immediately after the intake of the utmost TBA in the macroinitiator, the second monomer, methyl methacrylate (MMA) was added to the reaction medium, for further polymerization. In these experiments the compositions of the monomers were varied, although the concentrations of ligand, catalyst and the initiator were kept constant. Subsequently, the diblock copolymers were hydrolyzed, under acidic conditions, using HCl catalyst, to obtain an amphiphilic copolymer. These block copolymers were characterized by NMR, IR, GPC, and DSC techniques. These copolymers will be used in, powder coatings, pigment dispersions, and as compatibilizers in polymer blends.     

优化含氟丙烯酸酯共聚物乳胶膜表面性能的方法研究

含氟丙烯酸酯乳液由于氟的引入具有优异的表面性能,在涂料、胶粘剂、纺织助剂等领域得到广泛应用.然而含氟单体成本较高,而且产物中乳化剂的存在影响了含氟丙烯酸酯乳液涂膜的抗污、疏水疏油等特性.如何采取有效措施提高含氟丙烯酸酯共聚物乳胶膜的表面性能,是其走向产业化急需解决的问题.针对这方面问题,本文主要从含氟单体的利用率、设计乳胶粒结构、共聚物链结构以及乳胶膜的后处理等方面对近年来的研究成果进行了综述.     

Fundamental studies of grafting reactions in free radical copolymerization. II. Grafting of styrene,acrylate, and methacrylate monomers onto cis-polybutadiene using AIBN initiator in solution polymerization

Grafting can be initiated by primary and/ or polymer radical attack on the backbone polymer and it is well known that AIBN does not readily promote grafting, even when using poly-butadiene. We have studied the grafting of several different monomers onto cis-polybuta-diene using AIBN initiator and find dramatically different results among the monomers. As expected, styrene grafts at very low levels due to the inactivity of the initiator radicals and the polystyryl radicals. Methacrylate monomer grafts at a slightly higher level due to its more reactive polymer radical, while acrylate monomer readily grafts onto the poly-butadiene because polyacrylate radicals are quite reactive. The use of a kinetic model allowed the evaluation of rate coefficients for graft site initiation to be in the relative order of 0.1 : 1.0 : 10.0 (L/mol/s) for styrene:methacrylate:acrylate monomers. The model also pro-vided successful interpretations of the grafting data and its dependence upon the concen-trations of monomer, initiator, and backbone polymer. Due to the relatively higher reactivity of the polyacrylate radicals, the benzene solvent acted as a chain transfer agent in this system. This affected the molecular weight of both free and grafted acrylate polymer and also surpressed the graft level. Polyacrylate radicals attack the cis-polybutadiene backbone by abstracting an allylic hydrogen and also adding across the residual double bond. The latter mechanism is responsible for the majority of the grafting; the hydrogen abstraction leads to relatively inactive radicals which cause a retardation in the overall reaction rate. © 1995 John Wiley & Sons, Inc.     

Effects of monomer structure on the morphology of polymer networks and the electro-optical properties of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) films were prepared by photochemical polymerisation with a series of (meth)acrylate monomers. The effects of monomer structure on the morphology of polymer networks in the PDLC films were studied. The acrylate monomers without sidegroup chain formed uniform polymer networks. The methacrylate monomers with methyl as their sidegroup chains formed lace-like networks. The size of the LC droplets increased with increasing the length of the flexible chain of both methacrylate and acrylate monomers. Meanwhile, the effects of the morphology of the polymer network on the electro-optical properties of PDLC films were also investigated.     

亲水单体对聚氨酯-含氟丙烯酸酯复合乳液颗粒和表面性能的影响

为了提高聚氨酯-丙烯酸酯聚合物的耐水性和耐溶剂性, 将N-甲基二乙醇胺(MDEA)扩链的交联聚氨酯丙酮溶液作为反应介质, 以苯乙烯、丙烯酸丁酯、含氟丙烯酸酯(FA)为单体, 过氧化苯甲酰为引发剂, 通过溶液聚合相转化法制得新型阳离子聚氨酯-含氟丙烯酸酯复合乳液. 研究了MDEA对聚合物水分散液的乳胶粒径、Zeta电位以及乳胶膜表面性能的影响, 并用FTIR, TEM对聚合物的结构和乳胶粒形态进行了表征. 结果表明, MDEA的添加利于降低乳胶粒径, 但对乳胶膜的疏水性能有不利影响, 当MDEA的质量分数为13.15%时, FPUA乳胶粒的形态呈球形, 粒径约为253 nm, 乳胶膜的表面自由能低于25.1 mJ/m², 接触角衰减速率约为0.38 (º)/min. 另外, 乳胶膜的高温处理能够使表面自由能降低11.5%以上.     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

Flame-retardant modification of UV-curable resins with monomers containing bromine and phosphorus

UV-curable urethane acrylate resin and oligoester acrylate resin have been effectively flame retarded with vinyl-type flame-retardant monomers containing both bromine and phosphorus atoms. Thermogravimetric analysis indicates that the decomposition temperature of flame-retardant monomer is more closely matched to the decomposition temperature of cured oligoester acrylate resin than to that of cured urethane acrylate resin. The efficiency of each flame-retardant monomer in oligoester acrylate resin is higher than in urethane acrylate resin by a factor of ～ 2.2. The individual and the combined effects of tribromophenyl acrylate and triphenyl phosphate on the oxygen index of UV curable urethane acrylate resin have been studied. The bromine phosphorus synergistic action of the two flame-retardant components is evaluated quantitatively, and a maximum intermolecular bromine phosphorus synergism was observed in a flame-retarded formulation containing a Br/P atom ratio of 2. In the three acrylic monomers containing both bromine and phosphorus atoms, the optimum intramolecular bromine phosphorus synergism was observed at a monomer also containing a Br/P atom ratio of 2.     

The effect of fluorine-substituted acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystals

The effects of fluorinated acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystal (PDLC) films are reported. The partial fluorination of host polymer matrices resulted in improved optical properties and better defined morphologies. An enhancement in contrast ratio was observed for fluorinated systems containing trifluoroethyl acrylate (TFEA) and hexafluoroisopropyl acrylate (HFIPA). Conversely, the incorporation of methyl acrylate (MA), a chemically similar non-fluorinated acrylate, resulted in no appreciable change in contrast ratio and an increase in relaxation time. Scanning electron microscopy morphological studies were conducted to understand further the influence of fluorinated monomers in PDLC systems.     

Hydrazone initiators for vinyl polymerizations

A series of hydrazones were prepared and tested for their ability to act as free‐radical initiators for vinyl monomers. The most active initiators were the tertiary butyl hydrazones of aromatic, aliphatic ketones. The most reactive vinyl monomers were acrylate‐type monomers, with methacrylate‐type monomers being somewhat less reactive. When the most reactive hydrazone initiators, such as compound 1 , were added to ambient‐temperature solutions of acrylate monomers, such as aqueous sodium acrylate or aqueous acrylamide, polymerizations to hard gels occured within 1 min. In some cases of vinyl polymerizations, these hydrazone initiators can act as low‐temperature alternatives to redox initiators. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1391–1402, 2001