不同硅铝比两亲性HZSM-5沸石的制备和表征

 采用三甲基氯硅烷并通过控制水的添加量对硅铝比分别为25, 42和101的HZSM-5沸石进行外表面修饰,制得三种两亲性沸石样品. 水的添加量对沸石催化剂的两亲性有显著影响. 红外光谱和低温氮吸附等测试结果表明,两亲性沸石样品具有与各自母体沸石相似的酸性及略小的比表面积. 在环己烯水合及乙酸异戊酯水解的相界面反应中,两亲性沸石分布于水-油两相界面,并表现出明显高于各自母体沸石的催化活性. 硅铝比为42的两亲性HZSM-5样品表现出最佳的相界面催化性能. 相对于环己烯水合反应,两亲性HZSM-5沸石更适用于乙酸异戊酯水解的相界面催化反应.     

不同硅铝比的ZSM-11沸石分子筛的催化性能

合成了一系列硅铝比为31—176的ZSM-11沸石,以甲苯-甲醇烷基化、间二甲苯异构化和甲苯歧化三个反应作为探针反应,研究了它们的催化性能。将其与酸性质和晶胞参数相关联发现,低硅铝比适于甲苯歧化,中硅铝比适于间二甲苯异构化,高硅铝比适于甲苯-甲醇烷基化反应。各反应所需的酸强度为甲苯歧化>间二甲苯歧化>间二甲苯异构化>甲苯-甲醇烷基化。Na~+的存在以及用4-甲基喹啉或(CH_3)_3SiCl中毒,可抑制强酸位,明显提高甲苯-甲醇烷基化反应生成对二甲苯的选择性,尤以(CH_3)_3SiCl中毒的低Al/u.c.的NaHZSM-11最佳。     

Acidity effects of Hβ zeolite on olefin alkylation of thiophenic sulfur in gasoline

Olefin alkylation of thiophenic sulfur process was carried out in model gasoline, using Hβ zeolites with different Si/Al2 ratios as catalysts. In particular, the influence of acid properties of Hβ zeolites on its catalytic ability for the thiophene alkylation, xylene alkylation and hexene oligomerization was investigated. The results showed that the acidity of the Hβ zeolite was increased with the decrease of Si/Al2 ratio, but its catalytic ability was not always increased. In fact, it reached the maximal catalytic ability at Si/Al2 ratio of 66, and under the reaction conditions of 60 ℃, 1.5 MPa, WHSV 3.0 h-1and time on stream 2 h. At the ratio, the conversion of thiophene, xylene, and oligomerized hexene were 96.6%, 2.7% and 2.8%, respectively. An optimal Si/Al2 ratio exists for the catalytic performance of H/3 zeolite. By investigating the coke deposition of the used H/3 zeolite catalysts, it has been found that the optimal Si/Al2 ratio is attributed to the combined effect of the carbocation activation capability and the hydrogen transformation capability of the H/3 zeolite catalyst.     

低硅铝比ZSM-48分子筛合成及其正构十二烷临氢异构催化性能研究

通过静态水热合成法,溴化六甲二铵作为结构导向剂合成出系列低硅铝比的ZSM48沸石分子筛(Si/Al100),所合成样品中最低硅铝比为38.6(ICP-AES),这将拓宽ZSM-48高硅沸石分子筛的应用范围。制备Pt负载双功能催化剂,用于正构十二烷临氢异构催化反应。结果表明,硅铝比的改变可以影响催化剂的活性,投料硅铝比为70的双功能催化剂具有最优的催化性能,但硅铝比改变对异构产物的分布没有明显的影响,其异构产物以支链在中间位的异构体为主。     

Alkylation of 2-naphthol with long-chain olefins over zeolites

Alkylation of 2-naphthol with tripropylene in the presence of zeolite catalysts HBEA, H-Y and H-MFI was studied. Comparative studies on the catalytic properties of H-BEA, H-Y and H-MFI zeolites were carried out under identical reaction conditions. The results showed that the H-BEA catalyst exhibited outstanding catalytic performance; and the conversion and selectivity of 2-naphthol could be 52.1% and 86.3%, respectively. It was found that the structure and acid strength of zeolite catalysts were the major influencing factors for the conversion and selectivity of 2-naphthol alkylation.     

Y沸石的酸性

用^29Si MAS NMR(MAS为Magie Angle Spinning), 统计计算,NH3-TPD 等方法对(NH4)2·SiF6去铝补硅得到的高硅Y型沸石的酸位分布情况进行了研究, 并与典型酸催化反应数据相关联, 证实了Y型沸石的酸位强度取决于A1原子的周围环境, 即与次邻位A1原子数目n-NNN(NNN为Next Nearst Neighbor)有关, 沸石的强酸性来自次邻位无A1原子的AIO^-4四面体。 NH3-TPD法测量的沸石酸量和酸强度数据与^29Si MAS NMR 实验结果和统计计算得到的不同n-NNN A1位的分布是一致的。 随着A1含量减少, Y型沸石表面的总酸量是单调下降的。但强酸量却是先增加后下降, 在A1/(A1+Si)为0.15左右出现极大值。不同硅铝比的Y型沸石对典型的强酸性和弱酸性催化反应的活性变化规律亦与酸性相吻合。     

脱铝八面沸石的催化行为——非晶格铝的影响

经水热处理和SiCl4处理得到了两个系列的脱铝Y沸石USY（W）和USY（T）。经X射线衍射分析、化学分析和ESCA研究确定USY（W）中包含有非晶格铝，通过TPD、IR研究发现，沸石中非晶格铝屏蔽了沸石中的强酸中心，同时产生部分弱酸中心，经异丙苯裂化反应和DTA实验发现非晶格铝的存在虽使反应活性降低，但却提高了抗积碳能力。     

TEAOH-TMABr-Al2O3-SiO2-H2O体系中小晶粒offretite沸石的合成研究

不加无机强碱，在纯有机胺体系中合成了小晶粒offretite沸石，并采用XRD、SEM、FT-IR以及苯与丙烯烷基化制异丙苯探针反应对典型样品进行了结构性能表征。结果表明，采用四乙基氢氧化铵TEAOH与四甲基溴化铵TMABr为双模板剂时，TEAOH的量对合成产物影响很大，而TMABr的量增大容易导致生成Beta沸石。所合成的offretite沸石在苯与丙烯烷基化制异丙苯反应中活性和选择性较高。     

How Water and Ion Mobility Affect the NMR Fingerprints of the Hydrated JBW Zeolite: A Combined Computational-Experimental Investigation

An important aspect within zeolite synthesis is to make fully tunable framework materials with controlled aluminium distribution. A major challenge in characterising these zeolites at operating conditions is the presence of water. In this work, we investigate the effect of hydration on the ²⁷Al NMR parameters of the ultracrystalline K,Na-compensated aluminosilicate JBW zeolite using experimental and computational techniques. The JBW framework, with Si/Al ratio of 1, is an ideal benchmark system as a stepping stone towards more complicated zeolites. The presence and mobility of water and extraframework species directly affect NMR fingerprints. Excellent agreement between theoretical and experimental spectra is obtained provided dynamic methods are employed with hydrated structural models. This work shows how NMR is instrumental in characterising aluminium distributions in zeolites at operating conditions.     

Selective catalytic reduction of nitric oxide with ammonia over Fe-Cu modified highly silicated zeolites

In the present study, the solid-state ion exchange method (SSIE) was applied to introduce iron and copper into highly silicate zeolites: beta (BEA, Si/Al = 12.5), ferrierite (FER, Si/Al = 10) and mordenite (MOR, Si/Al = 10). The activity of the prepared samples in the selective catalytic reduction of NO with ammonia (NH₃-SCR) was measured. The highest performance was recorded for Cu-Fe-BEA followed by Cu-Fe-MOR while Cu-Fe-FER showed a low catalytic activity over the entire reaction temperature range. It is shown in this study that the zeolite framework is one of the parameters controlling the amount, environment and distribution of metal species formed during the ion exchange process in Cu-Fe-zeolite catalysts.     

RUB-13分子筛的合成及其甲醇制烯烃催化性能

采用水热法合成RUB-13分子筛，探讨了有机模板剂（OSDA）、硅源、晶化温度和水硅比等制备条件对RUB-13分子筛晶体结构的影响，考察了RUB-13分子筛在甲醇制烯烃（MTO）反应中的催化性能。结果表明，采用1，2，2，6，6-五甲基哌啶（PMP）为有机模板剂、白炭黑为硅源，在晶化温度为170℃的条件下，选择H₂O/Si比为100和80时可分别合成出高纯度的低硅铝比（Si/Al=100）和高硅铝比（Si/Al=200）的RUB-13分子筛晶体，且晶粒呈棒状形貌。H-Al-B-RUB-13（Si/Al=200）分子筛用于催化甲醇制烯烃反应时，在400℃下表现出高的低碳烯烃选择性（C_2-5⁼选择性达97.8%，丙烯选择性为54.5%），优于传统的H-SAPO-34和H-ZSM-5分子筛催化剂。     

HZSM—5沸石组成及其对甲苯乙基化选择性的影响

ZSM－5是一种铝含量较低（其（Si/Ai原子比变化可连续达几个数量级）的结晶硅酸铝，对许多酸催化反应有着良好的选择性。沸石Si/Al比的必然影响它的酸性质。Auroux和Kotasthane等研究HZSM－5沸石表面酸性时指出，强酸中心数与沸石铝含量有着密切的关系，酸强度分布也与铝含量有关，即随Si/Al比增加，最高酸强度中心数减少。另外，由晶胞参数测定表明，ZSM－5沸石孔径随Si/Al比增加呈逐渐缩小的趋势。由扫描电镜对沸石晶粒形貌和大小的测定示出，随Si/Al比增加，晶粒逐渐增大。鉴此，用不同整体Si/Al比和表层Si/Al比的HZSM－5沸石对甲苯乙基化反应的选择性进行了研究，结果表明：沸石表面酸性的调度以及孔径缩小和晶粒增大都能提高p-选择性，但表面最高酸强度的降 低比孔径缩小和晶粒增大更为重要。     

Photoluminescence response of terbium-exchanged MFI-type materials to Si/Al ratio, texture, and hydration state

Terbium-exchanged MFI zeolite type materials, i.e., microporous-mesoporous Zeotile-1 with the Si/Al ratio in the range 33-200, Zeogrid with the Si/Al ratio of 75, and nanocrystalline MFI with the Si/Al ratio of 75, were prepared via an ion exchange procedure. All of these zeolites were investigated by means of time-resolved photoluminescence techniques in various hydration states: as-synthesized (hydrated), calcined (heated at 450 degrees C in air), and rehydrated (after a six-month exposure to the atmospheric moisture). The photoluminescence decays and spectra were analyzed by discrete exponential fitting, distribution lifetimes analysis, and area-normalized time-resolved photoluminescence spectra. The results sustained a single average terbium species coordinated to both water molecules and framework oxygens in the hydrated zeolites. The framework contribution increased with the Si/Al ratio in Zeotile-1 and was greatest for the nanocrystalline MFI zeolite. For the calcined Zeotile-1 and Zeogrid, two main terbium species of different environments were found. For the nanocrystalline Tb3+-MFI, a distinct number of species could not be inferred, indicating a more heterogeneous distribution. Rehydration further differentiated among the Tb3+-exchanged zeolites. Photoluminescence line shape and decay of Tb3+-Zeotile-1 were between those of the hydrated and calcined states indicating a slow rehydration rate in contrast with the photoluminescence properties of Tb3+-MFI, which fully recovered the values of the hydrated state. Tb3+-Zeogrid presented an intermediate case: while the PL line shape was fully restored to that measured for the hydrated sample, the decay was still longer than that measured with the hydrated sample. Terbium photoluminescence response related to zeolite texture, Si/Al ratio, and hydration state suggest different sitting and location of terbium in Zeotile-1, Zeogrid, and nanocrystalline MFI materials. In mesoporous Zeotile-1 and Zeogrid, the results sustained two types of terbium sites: one on the internal surface of mesopores, the other inside the pores, while for the nanocrystalline MFI, terbium sites inside the pores predominate.     

DFT计算结合固体NMR研究富铝SSZ-13的铝分布和Br?nsted酸性

具有菱沸石(CHA)结构的SSZ-13分子筛在甲醇制烯烃(MTO)及柴油机车尾气氨选择性催化还原(NH_3-SCR)反应中具有重要的应用,采用富铝SSZ-13可以调节MTO反应的烯烃选择性和提升NH_3-SCR的低温脱硝活性,因此SSZ-13中的铝含量和分布与对应的酸性决定了其催化性能。本文采用密度泛函理论结合固体核磁共振实验研究了富铝和富硅HSSZ-13的Al位置与Br?nsted酸强度的内在关系。通过计算取代能发现,对于孤立Al位,质子位于Al周围4个不同O位时能量差异较小,最稳定的B酸位点是O(1)―H。对于富铝SSZ-13,两个Al原子位于同一六元环的对位是Al-Si-Si-Al (NNNN)序列中最稳定的结构,而Al-Si-Al (NNN)序列中能量最优的Al分布是两个铝原子排布于六棱柱上下不同的六元环上。通过计算最稳定构型下的质子亲和势、NH3脱附能和吸附氘代乙腈后的1H NMR化学位移,发现富铝SSZ-13中含有Si(2Al)分布的NNN序列导致了其Br?nsted酸强度弱于高硅的分子筛。分峰拟合29Si魔角旋转核磁共振(MASNMR)谱图表明富铝SSZ-13中Si(2Al)的含量在43%以上,而吸附氘代乙腈后的1H MAS NMR实验显示富铝SSZ-13的桥羟基化学位移向低场移动,进一步证明富铝SSZ-13具有较弱的Br?nsted酸强度。     

EFFECTS OF SYNTHESIS PARAMETERS ON ZEOLITE ZSM-48 IN A SOLID REACTION MIXTURE SYSTEM

IntroduCtionReCently,zcoliteZSM-48hasbeenspehesizedinapurelysolidsystemll1.Thismethedusedtosynthesizezcolitescangndlyincreasetheyieldofpnductsperunitvolume,simplifythepr0cedresanddecreasethecnvironmentalpolluti0n.ThisincreasestheacualPOssibilityofsynthesisofhigh-silicazcolitesinchemicalindustry.MoreOver,itisalsohelpfulforstUdyingthezeolitecrystalliZai0nmechanism.ItiswellknownthatthesamewneofzeolitessynthesizedindifferentsystemshasdifferentcatalyticpropertiesduetothechangesoftheirfinestruC…     

弱酸性多级孔MFI沸石上甲醇转化制丙烯（英文）

使用葡萄糖辅助模板合成了H-[B,Al]-ZSM-5沸石并用于催化甲醇转化制丙烯。优越的丙烯选择性和活性持久性关联于有利于丙烯生成的高的弱酸/强酸比例以及有利于改善反应物扩散的防止快速积炭的高的介孔率。较多的位于MFI沸石直/正弦孔道的骨架铝增加了产物丙烯/乙烯比归因于促进的丙烯生成。低的酸密度有助于高的丙烯/乙烯比。B/Al比为2且（Al₂+B₂）/Si比为0.01的HZ5-G-2B样品用于甲醇制丙烯反应,在原料CH₃OH/H₂O（1∶1.2）重时空速为1.8 h^-1、480°C反应条件下,丙烯选择性为51.6%, C_2-4⁼烯烃选择性为83.7%,甲醇完全转化。丙烯/乙烯比为2。催化活性保持580 h稳定。     

HZSM-5型分子筛硅铝比对一步法合成二甲醚的影响

以Cu/Zn/Al(摩尔比为6∶3∶1)甲醇合成催化剂与HZSM-5型分子筛混合,制备了一步法二甲醚合成催化剂。通过改用三种不同Si/Al摩尔比（摩尔比为25、38和50）的HZSM-5型分子筛,考察了催化剂中脱水组分（HZSM-5分子筛）的酸性对二甲醚合成的影响。结果表明,随着催化剂Si/Al摩尔比的降低,分子筛的酸性增强,使得CO单程转化率提高。当催化剂Si/Al＝38时,CO对二甲醚的选择性最高,可达到68.13％,其次是催化剂Si/Al＝50,选择性最差的是Si/Al＝25的催化剂。在553 K、 3 MPa和4 000 h－1的条件下,Si/Al＝25和Si/Al＝38的催化剂CO单程转化率和DME的选择性接近一致。在此条件下,两者的时空产率达到试验的最大值,分别为0.38 gDME/(gcat·h)和0.36 gDME/(gcat·h),在试验范围内,一步法合成二甲醚催化剂最佳的Si/Al摩尔比为25。     

ZSM—5芳构化反应活性和稳定性的研究

ＺＳＭ－５以其独特的基于微孔结构特征的形状选择性和强酸中心，而成为具有酸催化择形性能的新型分子筛催化剂．ＺＳＭ－５分子筛表面酸性中心不但是反应的活性中心，同时也是积炭中心，这使得这类催化剂不仅具有很高的催化反应活性，同时也具有较高的结焦活性．催化剂表...     

Acidity effects of Hβ zeolite on olefin alkylation of thiophenic sulfur in gasoline

Olefin alkylation of thiophenic sulfur process was carried out in model gasoline, using Hβ zeolites with different Si/Al2 ratios as catalysts. In particular, the influence of acid properties of Hβ zeolites on its catalytic ability for the thiophene alkylation, xylene alkylation and hexene oligomerization was investigated. The results showed that the acidity of the Hβ zeolite was increased with the decrease of Si/Al2 ratio, but its catalytic ability was not always increased. In fact, it reached the maximal catalytic ability at Si/Al2 ratio of 66, and under the reaction conditions of 60 ℃, 1.5 MPa, WHSV 3.0 h^-1 and time on stream 2 h. At the ratio, the conversion of thiophene, xylene, and oligomerized hexene were 96.6%, 2.7% and 2.8%, respectively. An optimal Si/Al2 ratio exists for the catalytic performance of Hβ zeolite. By investigating the coke deposition of the used Hβ zeolite catalysts, it has been found that the optimal Si/Al2 ratio is attributed to the combined effect of the carbocation activation capability and the hydrogen transformation capability of the Hβ zeolite catalyst.     

在无有机导向剂条件下采用乙醇为助剂合成高硅沸石

高硅沸石具有优异的热稳定性、水热稳定性、大的微孔体积、高表面积和均匀的微孔孔道,因而广泛应用于催化领域.然而,高硅沸石的合成往往需要使用有机结构导向剂,不但增加了沸石合成成本,而且还产生了大量的三废排放.为了解决这个问题,我们发展了在无有机导向剂存在条件下采用沸石晶种诱导合成沸石的方法,但是该方法合成的沸石产物骨架富铝,不能合成高硅沸石,实现绿色方法合成工业上大量使用的高硅沸石问题仍然没有解决.最近,我们又报道了采用沸石晶种导向和醇填充相结合的方法合成纯硅沸石,但仍不能合成高硅沸石.本文首次在无有机结构导向剂存在条件下采用乙醇为助剂合成高硅沸石,并成功地合成了硅铝比(Si/Al)为38?240的ZSM-5沸石.此方法成功的关键是使用具有四配位铝物种的硅铝酸盐前驱体作为起始原料.因为乙醇的沸点低,溶液中的乙醇可以循环使用,大幅度地降低了传统高硅沸石合成有机模板的三废排放成本.通过固体核磁证明,在沸石的晶化过程中,硅物种发生重排与聚合,而铝物种一直保持着四配位的状态不变,这表明Si-O-Al类的连接在晶化过程中基本上保持稳定.另外,采用该方法合成了高硅TON,MTT,*MRE沸石,表明了此方法的普适性.此外,还可以将Fe和B等杂原子引入到沸石骨架中,成功地合成了铁硅和硼硅沸石.X射线粉末衍射测试与扫描电子显微镜表征结果表明,所合成的高硅ZSM-5沸石具有高纯度和结晶度,样品呈现出典型的块状ZSM-5晶体形貌.样品的BET表面积和微孔体积分别为382 m²/g和0.16 cm³/g,这与传统方法以TPAOH为有机结构导向剂合成的ZSM-5沸石的BET表面积和微孔体积是几乎一致的.更重要的是,所制备的ZSM-5沸石在甲醇制丙烯反应中,具有良好的催化性能,并与使用有机结构导向剂合成的ZSM-5沸石具有相似的活性、选择性和催化剂寿命.综上所述,在沸石晶种和乙醇存在的条件下,以硅铝酸盐前驱体为起始原料,在无有机结构导向剂存在条件下,成功地合成出了高硅MFI,TON,MTT和*MRE沸石.同时,也可利用硼硅酸盐和铁硅酸盐为起始原料来合成B-ZSM-5和Fe-ZSM-5沸石.与传统的合成高硅沸石路线相比,此方法避免了昂贵和有毒的有机结构导向剂的使用、减少了废水的排放、简化了合成过程和提高了产品收率;同时所合成沸石具有优异的催化性能,为高硅沸石的产业化生产和催化应用奠定基础.