Effect of the initial maleic anhydride content on the grafting of maleic anhydride onto isotactic polypropylene

A series of ¹³C‐enriched maleic anhydride grafted isotactic polypropylene samples were prepared in solution at 170 °C by changes in the initial maleic anhydride content. The NMR spectra of the samples showed that the signals of the maleic anhydride attached to the tertiary carbons of the isotactic polypropylene chains increased considerably with increasing maleic anhydride content, whereas the signals of the maleic anhydride on the radical chain ends (with a single bond) arising from β scission did not. On the other hand, the signals of the maleic anhydride on the radical chain ends with double bonds increased markedly with increasing maleic anhydride content, and this suggested that β scission could occur extensively after maleic anhydride was attached to the tertiary carbons. As a result, the molecular weight of the grafted polypropylene decreased significantly with increasing maleic anhydride content in this study. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5529–5534, 2005     

Grafting of maleic anhydride to n-eicosane

Maleic anhydride was grafted to the linear hydrocarbon, n-eicosane, at 165°C in the presence of the free radical initiator, 2,5-dimethyl-2,5-di(t-butylperoxy)-3-hexyne. The anhydride has a low solubility in eicosane and a multiple addition procedure was adopted. Grafted product which separated from the reaction mixture was fractionated and analyzed. The fractions contained on average 2–5.5 anhydride units/eicosane residue. ¹H- and ¹³C-NMR studies show that the grafts consist of single succinic anhydride rings. At the concentrations of maleic anhydride chosen for homogeneous reaction ( < 0.02 M) and at 165°C, poly(maleic anhydride) is above its ceiling temperature, so that succinic anhydride radicals cannot add maleic anhydride to form polymer side chains. Instead, these radicals abstract hydrogen atoms to yield grafts consisting of single anhydride units.     

Surface modification of fine colloidal silica with copolymer silane-coupling agents composed of maleic anhydride

The reactivity of copolymer silane composed of maleic anhydride in the modification of fine colloidal silica was studied. The reaction of colloidal silica of 10 and 45-nm diameter with trimethoxysilyl-terminated poly(maleic anhydride-co-styrene) [P(MA-ST)] and poly(MA-co-methyl methacrylate) in tetrahydrofuran resulted in effective surface modification without particle aggregation. From the results that the reaction using the polystyrene silane of low molecular weight led to partial aggregation, it was suggested that the steric interaction between relatively rigid copolymer chains having a maleic anhydride moiety adsorbed on the silica prevented the aggregation in the reaction. The ²⁹Si cross-polarization magic-angle-spinning NMR spectra of P(MA-ST)-modified silica showed that the polymer silane was bound to the silica surface by the direct reaction with silica hydroxyl groups and via the polymerization. Received: 27 June 2001 Accepted: 6 September 2001     

Melt modification of poly(styrene‐co‐maleic anhydride) with alcohols in the presence of 1,3‐oxazolines

Various copolyesteramides were prepared by melt compounding at 220 °C involving reaction of poly(styrene‐co‐maleic anhydride), SMA, with 6, 17, and 28 wt % maleic anhydride content, and 1‐dodecanol, C12OH, in the presence of 2‐undecyl‐1,3‐oxazoline, C11OXA. Copolymer architectures were examined by means of ¹H NMR, FTIR, DSC, and TGA using model compounds prepared via solution reactions. While conversion of anhydride with alcohol was poor due to the thermodynamically favored anhydride ring formation, very high conversions were achieved when stoichiometric amounts of C11OXA were added. According to spectroscopic studies esteramide groups resulted from reaction of oxazoline with carboxylic acid intermediate. In the absence of alcohol, C11OXA reacted with anhydride to produce esterimides. Effective attachment of flexible n‐alkyl side chains via simultaneous reaction of C12OH and C11OXA resulted in lower glass‐transition temperatures of copolyesteramides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1222–1231, 2000     

Vapor-phase graft copolymerization of binary solid monomers onto poly(ethylene-co-vinyl acetate) film by ultraviolet irradiation

Vapor-phase graft copolymerizations of acenaphthylene–maleimide or acenaphthylene–maleic anhydride binary solid monomers onto poly(ethylene-co-vinyl acetate) films were carried out under ultraviolet irradiation. The extent of sorption of single or binary monomers increased with the increasing vinyl acetate content in the backbone polymers. The sorbed binary monomers were mainly composed of acenaphthylene, but the maleimide or maleic anhydride fraction increased with the increasing vinyl acetate content of the films and the composition was little affected by surface hydrolysis. In all series of graft polymerization of single or binary monomers the overall extent of grafting increased with the vinyl acetate content and was suppressed by the surface hydrolysis of the backbone film. The composition of the grafted copolymer, however, differed markedly, depending on the combination of binary monomers. The grafted copolymer in the acenaphthylene–maleimide system was composed mainly of acenaphthylene units, whereas that in the acenaphthylene–maleic anhydride system was composed mainly of maleic anhydride units. The results were compared with those of γ-ray grafting, and it was suggested that the contribution of a direct supply of monomers from vapor phase and the existence of an acetoxy group on the surface of the film should play an important role in the grafting reaction.     

Structure of poly(maleic anhydride)

The bulk polymerization of maleic anhydride initiated with acylperoxides, di-tert-butyl peroxide, AIBN, or pyridine proceeds with evolution of CO₂. The amount of CO₂ generated depends on the nature and the concentration of the initiator. With peroxide initiators, less than 5% of the polymerized maleic anhydride is decarboxylated. ¹H-NMR spectra, obtained on the benzoyl peroxide-initiated polymer and its methyl ester, are consistent with the unrearranged poly(maleic anhydride) structure and rule out the polycyclopentanone structure proposed by Braun and co-workers. Base-initiated polymaleic anhydride is substantially decarboxylated, and the resulting polymer has anhydride and carboxyl groups. Elemental analyses and ¹H-NMR spectra obtained on the pyridine-initiated polymer and its methyl ester refute both the cis-poly(vinylene ketoanhydride) structure suggested by Schopov and the polycylopentanone structure proposed by Braun and co-workers.     

Radical cyclocopolymerization of divinyl ether and maleic anhydride. A 13C-NMR study of the polymer structure

The structure of the 1:2 copolymer of divinyl ether and maleic anhydride was investigated by ¹³C-NMR spectroscopy. The polymer contains the bicyclic unit composed of one molecule of each monomer and the maleic anhydride unit. The carbon chemical shift for these units was calculated on the basis of the chemical shift of many model compounds. The major peaks of the cyclopolymer prepared in chloroform were consistent with the presence of the symmetrical bicyclic unit with cis junction and the trans monocyclic anhydride unit. The carbonyl carbon spectrum for the copolymer obtained in a mixed solvent of acetone and CS₂ suggested the predominant formation of the unsymmetrical bicyclic unit. The polymerization process was discussed on the basis of these results.     

Radical copolymerization of the C9 hydrocarbon fraction of liquid pyrolysis products with maleic anhydride

Radical copolymerization of the C₉ hydrocarbon fraction of liquid pyrolysis products with maleic anhydride was studied. The influence of reaction conditions on the copolymer yield, its molecular mass, and maleic anhydride content was elucidated. Hydrophilic products showing promise as modifying additives to paper stock, binding agents, dispersants, and compatibilizers were prepared.     

Selective oxidation of crotyl alcohol and crotonaldehyde on V2O5/MgO: In situ FTIR study

The adsorption of crotyl alcohol, crotonaldehyde and crotonic acid on MgO, V₂O₅ and V₂O₅/MgO mixed oxide was studied under oxidizing conditions by in situ FTIR spectroscopy. The results were further analyzed in order to investigate the surface intermediates of crotonaldehyde oxidative dehydrogenation to maleic anhydride. A stable surface compound, alkoxide, was found during the crotyl alcohol adsorption for all oxides at room temperature (RT). The reaction between the adsorbed crotonaldehyde and the oxygen atom of the catalyst resulted in the formation of carboxylate at higher temperatures (T>373 K). The formation of two different reaction products (furane and maleic anhydride) was detected from IR spectra following the crotonaldehyde adsorption at various oxygen pressures. It can be deduced that crotonic acid easily dissociates to form the surface carboxylate-crotonate, which is further oxidized to maleate and consequently to maleic anhydride at 573 K.     

Covalent Immobilization of Subtilisin A onto Thin Films of Maleic Anhydride Copolymers

Enzymes cleaving the biopolymer adhesives of fouling organisms are attracting attention for the prevention of biofouling. We report a versatile and robust method to confine the serine protease Subtilisin A (or Subtilisin Carlsberg) to surfaces to be protected against biofouling. The approach consists of the covalent immobilization of the protease onto maleic anhydride copolymer thin film coatings. High‐swelling poly(ethylene‐alt‐maleic anhydride) (PEMA) copolymer layers permitted significantly higher enzyme loadings and activities than compact poly(octadecene‐alt‐maleic anhydride) (POMA) films. Substantial fractions of the immobilized, active enzyme layers were found to be conserved upon storage in deionized water for several hours. Ongoing studies explore the potentialities of the developed bioactive coatings to reduce the adhesion of various fouling organisms.

     

Characterization of chloroprene and maleic anhydride copolymer by 13C-NMR spectroscopy and pyrolysis GC/MS

The radical copolymerizations of chloroprene (CP) and maleic anhydride (MAH) were carried out with AIBN in 1,4-dioxane at 60°C. The monomer reactivity ratios were estimated as r₁ (CP) = 0.38 and r₂ (MAH) = 0.07. Microstructures in the copolymer of chloroprene (CP) and maleic anhydride (MAH) were investigated by 75.4 MHz ¹³C-and 300 MHz ¹H-NMR spectroscopies. Resonances were assigned to the monomer sequence dyads CC, CM, and MC (C = chloroprene, M = maleic anhydride). Well resolved fine structure in the ¹³C-NMR spectra showed that 1,2- and 3,4-structural chloroprene units were negligible in the copolymer. The pyrolysis characterization of the copolymer was also investigated by the pyrolysis gas chromatography mass spectrometry (GC/MS). The fragments of CP and MAH monomers and CP-MAH hybrid dimer, CO, and CO₂ were identified after pyrolysis of the copolymer. © 1994 John Wiley & Sons, Inc.     

Kinetic studies of grafting of maleic anhydride to hydrocarbon substrates

The kinetics of grafting of maleic anhydride to various hydrocarbon substrates has been investigated. Grafting to eicosane and squalane was effected in the pure hydrocarbons and in 1,2-dichlorobenzene solution, while polyethylene was grafted only in solution. The initiator was 2,5-dimethyl-2,5-di(t-butylperoxy)-3-hexyne which has a half life of about 1 h at a typical reaction temperature of 150°C. At high concentrations of initiator (Ca. 0.02M), the rate of disappearance of maleic anhydride is linear with time. In the pure hydrocarbons the order with respect to initiator is close to 0.5. In squalane, the overall activation energy is 112 kJ mol^?1; the average number of maleic anhydride molecules grafted per molecule of peroxide decomposed varies from 8 at high rates of initiation to 57 at low rates of initiation. The results are interpreted in terms of a chain mechanism, including a slow propagation step in which a succinic anhydride radical abstracts hydrogen from the same or a different chain. The same general mechanism is proposed for grafting of maleic anhydride to polyethylene and the hydrocarbons in 1,2-dichlorobenzene solution.     

Synthesis and characterization of certain new poly(bisimide)s. I

Maleic and citraconic anhydrides were reacted with several diamines to obtain a novel class of high temperature resistant bisimides.^1–3 The bisimides were characterized by melting points, elemental analysis, UV–Vis, ¹H- and ¹³C-NMR, and mass spectral analysis. The bisimide monomers were then polymerized by the addition process. A poly(amidemaleimide) was also synthesized by reacting maleic anhydride with p-aminobenzhydrazide. The thermal stability of these highly crosslinked poly(bisimide)s were examined by TGA and DTA. A neat bisimide monomer obtained from 2,2′-bis[4(p-aminophenoxy)phenyl] propane with maleic anhydride namely, 2,2′-bis[4-(p-maleimidophenoxy)phenyl]propane was reacted with 2,2′-bis[4(p-aminophenoxy)phenyl]propane by the Michael reaction.⁴ A fiber glass cloth reinforced laminate was prepared from bismaleimide and amine mixture and the mechanical properties of the test laminate evaluated.     

Synthesis,Characterization, and Performance Evaluation of Polymeric HALS in Ethylene‐Propylene‐Diene Terpolymer (EPDM)

A polymeric hindered amine light stabilizer (HALS), wherein the hindered amine functionality was attached to the maleic anhydride graft ethylene‐propylene‐diene terpolymer (EPDM) was synthesized. This involves photoinduced grafting of maleic anhydride groups on unsaturated sites of EPDM, followed by incorporation of amino terminated HALS. The grafting and functionalization reactions were characterized by FTIR and ¹³C NMR spectroscopy. The surface changes upon degradation are studied by SEM. The photostabilizing efficiency of this polymeric HALS was studied and compared with conventional HALS under accelerated weathering conditions. The HALS grafted EPDM showed significantly improved photostabilizing efficiency.     

Copolymerization of 4-methyl-1,3-dioxene-4 with maleic anhydride and terpolymerization with styrene as the third component

Copolymerization of 4-methyl-1,3-dioxene-4 with maleic anhydride was carried out. The monomer reactivity ratio was determined to be r₁ = 0.18, r₂ ～ 0 in terminal model and r₁ = 0.015, r₁′ = 0.224, r₂′ = r₂′ = 0 in the penultimate model. Calculations of run number, linkage probabilities, and number-average chain length in the terminal model and comparison of n (mole ratio of each monomer unit content in copolymer) in each model with the experimental value was made. From these results, the obtained polymer was confirmed to be alternating. Terpolymerization of 4-methyl-1,3-dioxene-4 with maleic anhydride and styrene was also carried out. The agreement of the experimental value (titration by indicator or electroconductivity) of maleic anhydride content with the theoretical value confirms that the terpolymer has a DMS triad sequence.     

Surface Activity of Novel Polymerizable Anionic Polyoxyethylene 4-Nonyl-2-Prpylene-Phenyl Ether Ammonium Sulfate Succinate Surfactants

Novel polymerizable surface-active monomers were synthesized by successive treatment of polyoxyethylene 4-nonyl-2-prpylene-phenyl ether ammonium sulfate with maleic anhydride in the presence of hydroquinone at temperature of 180°C. The molecular structures of the polymerizable surfactants were confirmed by ¹H and ¹³C NMR spectroscopy. The surface tension isotherms on the air-water solution interface were obtained. The critical micelle concentrations (cmc) as well as the surface tension at the cmc were determined for these substances. The micellization and adsorption of the prepared anionic surfactants have been investigated by surface tension, and cloud point measurements. Surface parameters such as surface excess concentration (Γ _max), the area per molecule at interface (A _min) and the effectiveness of surface tension reduction (π_CMC) were determined from the adsorption isotherms of the prepared surfactants.      

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003     

Conducting Redoxpolymer-Based Reagentless Biosensors Using Modified PQQ-Dependent Glucose Dehydrogenase

Reagentless, oxygen-independent glucose biosensors based on an Os-complex-modified polypyrrole matrix and on soluble PQQ-dependent glucose dehydrogenase from Acinetobacter calcoaceticus are described.As the soluble form of glucose dehydrogenase from Acinetobacter calcoaceticus is a hydrophilic enzyme with a positive net charge, its entrapment into the positively charged hydrophobic polypyrrole film is much more complicated than that of the corresponding membrane enzyme or the negatively charged and very stable glucose oxidase. Possible ways for using soluble PQQ-dependent glucose dehydrogenase in combination with conducting polymer films are seen in the modulation of the enzyme properties by covalent binding of suitable compounds to the protein shell together with the adjustment of the properties of the conducting polymer film. This can be done by neutralising the net charge of the protein and/or optimising the electron-transfer pathway between enzyme and electrode surface by covalent binding of suitable redox relays to the protein surface.In addition, methods for increasing the hydrophilicity of the polymer film, such as the co-entrapment of high-molecular weight hydrophilic additives and copolymerisation of hydrophilic pyrrole derivatives are presented. It is demonstrated that the replacement of the parent monomer pyrrole by a suitable hydrophilic pyrrole derivative facilitates the entrapment of the modified soluble PQQ-dependent glucose dehydrogenase into the Os-complex-modified polymer and hence allows for the development of reagentless biosensors.     

Effect of comonomer sorption on radiation-induced copolymer grafting onto polyethylene and EVA films in the vapor phase

Radiation-induced copolymer grafting of acenaphthylene and maleic anhydride onto polyethylene or EVA film in the vapor phase was carried out and the effect of comonomer sorption on the grafting was studied. When polyethylene film was used as a backbone polymer, the sorption of the binary monomers during the grafting increased linearly as the grafting reaction proceeded. The marked increase was probably caused by the formation of a grafted layer. Particularly, the sorption of maleic anhydride was brought about by the existence of a grafted layer. In grafting onto EVA film, the content of maleic anhddride in the grafted copolymer increased with the increasing content of vinyl acetate in EVA. Continuous measurements of sorption of the comonomers onto EVA and grafted EVA films were carried out by use of an electrobalance. The distinctive feature of the sorption was that the equilibrium sorption of acenaphthylene or maleic anhydride onto the grafted EVA film increased and the diffusion constants for both comonomers decreased markedly with increasing percentage of graft. The copolymer grafting was explained from these results by assuming that the monomer molecules are supplied to the propagating chain ends mostly through a sorbed state on the polymer film.     

Characterization,morphology, thermal and mechanical properties of conductive polyaniline‐functionalized EPDM elastomers obtained by casting

Conductive elastomeric blends based on ethylene–propylene–5‐ethylidene–2‐norbornene terpolymer (EPDM) and polyaniline doped with 4‐dodecylbenzenesulfonic acid [PAni(DBSA)] were cast from organic solvents. Functionalization of the elastomer was promoted by grafting with maleic anhydride. Vulcanization conditions were optimized with an oscillating disk rheometer. The conductivity, morphology, thermal stability, compatibility, and mechanical behavior of the obtained mixtures were analyzed by in situ direct current conductivity measurements, atomic force microscopy, transmission electron microscopy, wide‐angle X‐ray scattering, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical thermal analysis, stress–strain and hysteresis tests. The vulcanization process was affected by temperature, the PAni content, and maleic anhydride. A reinforcement effect was promoted by the vulcanizing agent. The formation of links between the high‐molar‐mass phases and oligomers of PAni(DBSA) in the elastomeric matrix enhanced the thermal stability and ultimate properties of the blends. By the appropriate control of the polymer blends' composition, it was possible to produce elastomeric materials with conductivities in the range of 10^?5–10^?4 S · cm^?1 and excellent mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1767–1782, 2004