基于静电纺丝技术的多级结构聚合物纳米纤维复合材料的研究进展

静电纺丝技术是目前制备纳米纤维最重要的方法之一,以其制备的纤维具有直径可控、比表面积大、孔隙率高等优点,因而被广泛应用于过滤、催化、传感器及生物医学等众多领域.以静电纺丝纤维为模板可进一步构建多级结构的功能性聚合物纳米纤维复合材料,拓宽其应用范围.本文着重概述了近年来基于静电纺丝技术的简单共混型、核壳结构及多级结构的聚合物纳米纤维复合材料的制备、结构及性能,并展望了其应用研究前景.     

同轴静电纺丝技术制备药物缓释载体的研究进展

由于纳米纤维在组织工程支架材料,药物传递载体等方面的潜在应用,使得具有高比表面积的静电纺丝纳米纤维得到了很大的关注。静电纺丝技术是一种简单、有效的微／纳米技术,而同轴静电纺丝则是在传统静电纺丝技术上发展起来的新方法,单步即可制备连续的壳一芯结构纳米纤维或中空纳米纤维。这也使得静电纺丝纳米纤维在组织工程和药物缓释等领域有...     

静电纺丝纳米纤维膜固定化酶及其应用*

静电纺丝是一种简单有效的制备聚合物纳米纤维的技术,在组织工程、药物控释和传感器等方面具有广泛的应用。采用静电纺丝技术制备得到的纳米纤维膜具有比表面积大、孔隙率高和易于分离回收等优点,可以作为一种优良的酶固定化载体,目前在酶固定化领域受到了广泛的关注。本文综述了近年来静电纺丝纳米纤维膜固定化酶的研究进展,在阐述静电纺丝纳米纤维膜制备技术的基础上,详细介绍了纳米纤维膜表面担载法和包埋法固定化酶的原理和方法,分析了不同固定化方法的优缺点,并讨论了静电纺丝纳米纤维膜固定化酶的应用前景,对静电纺丝纳米纤维膜固定化酶的发展方向进行了展望。     

静电纺丝制备石墨烯基复合纳米纤维研究进展

在静电纺丝纳米纤维中加入纳米填料——石墨烯(G),有助于提高纳米纤维的性能,扩展其应用领域。本文综述了近年来国内外静电纺丝制备石墨烯基复合纳米纤维的研究现状,重点介绍了石墨烯与聚酰胺(PA)、聚甲基丙烯酸甲酯(PMMA)、聚丙烯腈(PAN)、二氧化钛(TiO2)等复合纳米纤维制备的研究进展及其在光催化剂、超级电容器、染料敏化太阳能电池(DSSCs)、传感器、生物医学等方面的应用潜力,展望了石墨烯基复合纳米纤维的发展前景。     

电纺含银纳米粒子复合纤维的制备及应用

银纳米粒子由于其特殊的物理化学性质而被广泛应用,但其易团聚,影响实际使用效果。银纳米粒子可被负载到稳定载体上,获得具有优异性能的纳米复合材料,克服了团聚等缺限,大大改善应用效果和效率。采用静电纺丝技术制备银修饰纳米复合纤维材料是其中一种有效的方法,近年来在复合材料制备领域受到了广泛关注。本文综述了最近几年关于静电纺丝制备负载银纳米颗粒纤维复合材料及其应用的研究进展,重点介绍了静电纺丝制备负载银纳米纤维过程中纳米银的生成和负载方法,总结了有机主体和无机主体两种纺丝纤维的制备研究进展,详细介绍了负载银纺丝纤维在几个重要领域的应用及研究方向。     

取向静电纺丝纳米纤维的制备及应用研究进展

简单描述了静电纺丝的基本装置、原理;为制得高性能的取向纳米纤维,对静电纺丝中出现的不稳定性进行了研究,介绍了三种不稳定状况,并分析了其产生原因.列举了通过改变接收装置、控制电场和附加磁场等方法,改进静电纺丝技术来制取连续取向的纳米纤维,并对各种方法进行了简单的评价,指出磁化静电纺丝(MES)是目前制备取向纳米纤维最具有发展前景的方法.简要介绍了取向纳米纤维在生物组织工程领域方面的应用,并对其未来作了展望.     

静电纺丝纳米纤维在膜分离中的研究进展

静电纺丝纳米纤维由于自身独特的结构和优越的性能,已经引起人们的广泛关注,尤其是在能源、环境等领域中的应用具有潜在的价值。当前,静电纺丝纳米纤维在膜分离方面的研究及应用已经成为新材料功能化的热点之一。静电纺丝纳米纤维在膜分离领域,尤其在水处理、亲和膜分离和空气过滤方面,可以有效的提高分离效率,降低过程中的能耗,使得膜分离技术能够得到更广泛的应用。本文介绍了其在水处理、亲和膜分离和空气过滤等方面的最新研究进展,最后指出了尚待解决的问题,并对其未来做了展望。     

静电纺丝纳米纤维薄膜的应用进展

静电纺丝是一种简单而高效制备高分子微纳米纤维的技术,由于设备和实验成本低、纤维产率高、制备出的纤维比表面积比较大、适用性广泛等独特的优势,近些年来备受关注。静电纺丝的应用是静电纺丝研究的最基本动力和终极目标,因此成为研究者一直努力的方向。为了研究静电纺丝应用的研究现状和主要发展方向,本文综述了静电纺丝纳米纤维薄膜几个主要的应用领域,包括组织工程、药物缓释、纳米传感器、能源应用、生物芯片和催化剂负载等,并展望了未来可能的发展方向。     

聚合物的静电纺丝

静电纺丝法是聚合物溶液或熔体在静电作用下进行喷射拉伸而获得纳米级纤维的纺丝方法.由纳米纤维制得的无纺布,具有孔隙率高、比表面积大、纤维精细程度与均一性高、长径比大等优点,从而赋予了静电纺丝纤维广泛的应用前景,它已在国内外引起了广泛的关注.本文介绍了静电纺丝的装置、基本原理及静电纺丝制备纳米纤维的研究进展,同时也叙述了其在各个领域的应用,最后展望了静电纺丝制备纳米纤维的发展方向及前景.     

静电纺丝纳米纤维基超级电容器电极材料的研究进展

静电纺丝纳米纤维具有比表面积大、孔隙率高及密度低等优势,是电化学储能材料的理想候选者之一.本文综述了近年来静电纺丝碳纳米纤维、金属氧化物/硫化物/氮化物、导电聚合物及其复合材料在超级电容器领域的研究及应用进展,探讨了材料组成、结构与电化学电容性能之间的关系,并对静电纺丝纳米纤维基电极材料的发展前景进行了展望.这将为新型高性能超级电容器电极材料的结构设计与可控制备提供新思路.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.