首页 | 本学科首页   官方微博 | 高级检索  
     检索      

ICP-AES测定钼铁中微量锑和锡
引用本文:支国瑞,刘吉红,杨体绍,马宏彦,卢艳军.ICP-AES测定钼铁中微量锑和锡[J].理化检验(化学分册),2002,38(9):459-461.
作者姓名:支国瑞  刘吉红  杨体绍  马宏彦  卢艳军
作者单位:1. 河南安阳钢铁集团公司中心试验室,安阳,455004
2. 河南安阳彩显玻壳有限公司品保部
摘    要:讨论了CID作检测器,ICP-AES测定钼铁中微量锑和锡,选择了最佳分析谱线和仪器重要参数,通过试验大量钼和铁的影响,用铁量匹配绘制校准曲线对试样进行直接测定的方法,检出限锑为0.0011%,锡为0.0004%,回收率为99%-103%。

关 键 词:ICP-AES  测定  钼铁  CID      微量分析  炼钢  原料  铣合金  电感耦合等离子体发射光谱
文章编号:1001-4020(2002)09-0459-03
修稿时间:2001年3月26日

ICP-AES DETERMINATION OF MICRO AMOUNTS OF ANTIMONY AND TIN IN FERROMOLYBDENUM
ZHI Guo-rui,LIU Ji-hong,LU Yan-jun,YANG Ti-shao,MA Hong-yan.ICP-AES DETERMINATION OF MICRO AMOUNTS OF ANTIMONY AND TIN IN FERROMOLYBDENUM[J].Physical Testing and Chemical Analysis Part B:Chemical Analgsis,2002,38(9):459-461.
Authors:ZHI Guo-rui  LIU Ji-hong  LU Yan-jun  YANG Ti-shao  MA Hong-yan
Abstract:It was reported that in the ICP-AES determination of microamounts of antimony and tin in ferromolybdenum, charge injection device (CID) was used as detector in the measurement. The optimum analytical conditions (i.e. the choice of analytical wavelength the rationization of sample dissolution and etc) and the working parameters of the instrument were studied thoroughly. As a result of the study of the interference of matrix components (Mo and Fe) to the determination of Sb and Sn, it was ascertained that in the preparation of calibration curve, about 40% (mass percentage) of pure iron should be added as a correction for its matrix interference. Limits of detection for Sb and Sn were found to be 0.0011% and 0.004% respectively. Recoveries obtained were in the range of 99% to 103%.
Keywords:ICP-AES  CID  Ferromolybdenum  Antimony  Tin
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号