Elimination of bis(trimethylsilyl)stannylene from tris(trimethylsilyl)stannylated zirconocene and hafnocene chlorides

Reactions of (Me₃Si)₃SnK with Cp₂MCl₂ (M = Zr, Hf) give the respective stannylated metallocene chlorides. These complexes display a tendency to eliminate bis(trimethylsilyl)-stannylene under Cp₂M(Cl)SiMe₃ formation.     

Fabrication of a novel electrochemical sensor based on tin disulfide/multi-walled carbon nanotunbes-modified electrode for rutin determination in natural vegetation

A tin disulfide and multi-walled carbon nanotube (SnS₂/CNTs) electrochemical sensor was constructed for the sensitive and selective determination of rutin in plants. Tin disulfide nanoflowers with various particle sizes were prepared by controlling the reaction time and composited with multi-walled CNTs. The morphology, crystal structure, and chemical composition of these SnS₂/CNTs composites were characterized using XRD, XPS, and SEM-EDS. Results illustrated that the SnS₂/CNTs had a large specific surface area, good conductivity, and remarkable electrocatalytic performance. The pH of the buffer solution, the scanning rate, and the amount of modified material were also optimized for the rapid detection of rutin. A 2-electron-2-proton mechanism, involving a few rapid and consecutive stages, was speculated to occur during rutin oxidation, based on the observed slope of -53 mV/pH. There was an appreciable linear relationship between the reductive peak current from DPV and the rutin concentration, ranging from 0.005-0.05 µmol/L and 0.1-6 µmol/L, with a detection limit of 0.22 nmol/L (S/N = 3). The sensor also demonstrated good selectivity, excellent sensitivity, and reproducibility when analyzing rutin in real plant samples, with satisfactory recovery, and was also highly consistent with results of HPLC, and thus could be used to evaluate the medicinal value of natural vegetation.     

电泳法制备的致密氧化锡薄膜及其在高稳定性钙钛矿太阳能电池中的应用

在平面型钙钛矿太阳能电池中常采用SnO₂作为电子传输层材料,相应的SnO₂薄膜常采用溶液旋涂法制备。但是由于前驱液中的纳米颗粒可能会发生部分团聚、基底和溶液难以完全避免灰尘等杂质颗粒混入,且最佳的SnO₂电子传输层的厚度通常仅有约20 nm,所以这种方法制备的电子传输层难以保证严格致密和无纳米针孔。在本工作中,我们报道了一种电泳沉积制备致密SnO₂薄膜的方法,并用其有效地提高了钙钛矿太阳能电池的光电转换效率和工况稳定性。通过电泳法,表面带负电荷的SnO₂纳米颗粒在电场的作用下沉积到氧化铟锡(ITO)阳极表面,这种方法得到的薄膜比旋涂法制备的更为致密。将其应用于n-i-p结构的钙钛矿太阳能电池中,能够使得暗电流降低并抑制载流子的非辐射复合,从而提高电池的短路电流和开路电压,进而实现更高的光电转换效率(从18.17%提高到19.52%),且能消除迟滞效应。更重要的是,长期工况稳定性测试表明基于电泳-旋涂法制备的器件在1个太阳的光照下、最大功率点处连续工作960 h后,仍然能够保持71%的初始效率;然而基于旋涂法制备的器件在工作100 h后即降低到初始效率的70%。本工作提供了一种全新的SnO₂电子传输层的制备方法,显著地提高了器件性能和工况稳定性,后续有望应用于制备大面积器件和电池模组。     

Simultaneous Determination of Sn and S in Methyltin Mercaptide by Microwave-Assisted Acid Digestion and ICP-OESSCIEI北大核心CSCD

Methyltin mercaptide is widely used as one of the best heat stabilizer in the polyvinylchloride (PVC) thermal processing due to its excellent stability, good transparency, high compatibility and weather resistance. The content of sulfur and tin significantly affects its quality and performance, so it is of great significance to develop an analytical method for the simultaneous determination of sulfur and tin. Inductively coupled plasma atomic emission spectrometry (ICP-OES) has been a powerful analytical tool for a myriad of complex samples owing to its advantages of the low detection limits, rapid and precise determinations over wide dynamic ranges, freedom from chemical inter-element interferences, the high sample throughput and above all, simultaneous multi-elements analysis. Microwave technique as a well-developed method for sample preparation can dramatically reduce the digestion time and the loss of volatile elements compared with the traditional open digestion. Hereby, a microwave-assisted acid digestion (MW-AAD) procedure followed by inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis was developed for the simultaneous determination of Sn and S in methyltin mercaptide. This method has the advantages of simplicity, rapidness, good accuracy, green and less use of samples. Parameters affecting the MW-AAD such as the digestion solution and digestion time were optimized by using a chemical analyzed reference sample (DX-181) to attain tin and sulfur quantitative recoveries. HNO3-HCl-HClO4(v/v/v=9 : 3 : 1) and 10 min were the optimum digestion solution and digestion time, respectively. Under optimum conditions, the standard addition method and the standard calibration curve method were both been used to detect Sn and S in DX-181. There was no significant difference between two methods and the relative deviations to the chemical analysis values were both less than 2%. Additionally, the accuracy of the MW-AAD method was examined by analyzing three methyltin mercaptide samples (DX-181, DX-990, DX-960). The results were satisfactory with the relative deviations (<3%) and the recoveries of standard addition (99%-102%).     

Vacancy-like defects in nanocrystalline SnO2: influence of the annealing treatment under different atmospheres

The study of electronic and chemical properties of semiconductor oxides is motivated by their several applications. In particular, tin oxide is widely used as a solid state gas sensor material. In this regard, the defect structure has been proposed to be crucial in determining the resulting film conductivity and then its sensitivity. Here, the characteristics of vacancy-like defects in nanocrystalline commercial high-purity tin oxide powders and the influence of the annealing treatment under different atmospheres are presented. Specifically, SnO₂ nanopowders were annealed at 330 °C under three different types of atmospheres: inert (vacuum), oxidative (oxygen) and reductive (hydrogen). The obtained experimental results are discussed in terms of the vacancy-like defects detected, shedding light to the basic conduction mechanisms, which are responsible for gas detection.     

Solvothermal synthesis of PbTe/SnTe hybrid nanocrystals

PbTe/SnTe hybrid nanocrystals with designed shape, chemical composition and narrow size distribution were synthesized by an efficient solvothermal approach. This approach enables mass and economical synthesis of PbTe-based nanocrystals. The organic ligands were completely removed by pretreatment with a super-hydride solution, making it possible to fabricate fully dense and robust thermoelectric devices with increased electrical conductivity.     

Syntheses and molecular structures of four inorganic–organic hybrid compounds from N-containing aromatic bases and perchlorometallates of Zn,Cu, Sn,and Fe

Four organic–inorganic crystals, [(HL1)₂(ZnCl₄)]·H₂O (1) (L1?=?2-methylquinoline), [(HL1)₂(CuCl₄)] (2), [(HL2)₂SnCl₆] (3) (L2?=?6-bromobenzo[d]thiazol-2-amine), and [(HL3)FeCl₄] (4) (L3?=?5,7-dimethyl-1,8-naphthyridine-2-amine), derived from N-containing aromatic Brønsted bases and metal(II) chlorides (zinc(II) chloride, copper(II) chloride dihydrate, tin(II) chloride dihydrate, and iron(III) chloride hexahydrate) were prepared at room temperature and characterized by IR, X-ray structure analysis, elemental analysis, and TG analysis. The crystals are built up by perchlorometallates (Zn, Cu, Sn, and Fe) associated with organic cations through multiple non-covalent associations. X-ray diffraction analysis reveals that 1 and 2 have 3-D network structures built from hydrogen bonds between the cations and chlorometallates. Water molecules play an important role in structure extension in 1. Anhydrous 3 and 4 produced from 2-aminoheterocyclic derivatives display 2-D sheet structures. Arrangements of anions and cations are dominated by shape and size of cations, and also by the different structures of the chlorometallates as well as non-bonding interactions in the crystal structures. Except for 1, the other compounds are thermally stable below 240°C.     

Sonochemical synthesis of carbon supported Sn nanoparticles and its electrochemical application

A sonochemical approach was employed to prepare Vulcan carbon XC-72R supported by Sn nanoparticles at room temperature in the presence of ethylene glycol. The reduction of metallic Sn ion and ethylene glycol takes place and in turn the glycolate ion as formed acts as a stabilizing agent. Transmission electron microscope, X-ray diffraction, and X-ray photoelectron spectroscopy have illustrated that the metallic Sn nanoparticles are successfully embedded on the carbon. The significantly observed reduction over potential for oxygen reduction reaction displays a higher catalytic activity of carbon supported by Sn nanoparticles due to the large surface area of the modified electrode.     

The reactions of Ir(CO)Cl(PPh3)2 with HSnPh3

A reinvestigation of the reaction of Ir(CO)Cl(PPh₃)₂, 1 with HSnPh₃ has revealed that the oxidative-addition product Ir(CO)Cl(PPh₃)₂(H)(SnPh₃), 2 has the H and SnPh₃ ligands in cis-related coordination sites. Compound 2 reacts with a second equivalent of HSnPh₃ by a Cl for H ligand exchange to yield the new compound H₂Ir(CO)(SnPh₃)(PPh₃)₂, 3. Compound 3 contains two cis- related hydride ligands. Under an atmosphere of CO, 1 reacts with HSnPh₃ to replace the Cl ligand with SnPh₃ and one of the PPh₃ ligands with a CO ligand and also adds a second equivalent of CO to yield the 5-coordinate complex Ir(CO)₃(SnPh₃)(PPh₃), 4. Compound 4 reacts with HSnPh₃ by loss of CO and oxidative addition of the Sn-H bond to yield the 6-coordinate complex HIr(CO)₂(SnPh₃)₂(PPh₃), 5 that contains two trans-positioned SnPh₃ ligands.     

An optimized method for the synthesis of 2,6-diaminoanthracene

The reduction of 2,6-diaminoanthraquinone to 2,6-diaminoanthracene was examined under a variety of conditions. Direct reduction using zinc powder gave a mixture of the target product and 9,10-dihydro-2,6-diaminoanthracene under all the conditions examined. Protection of the starting amine, followed by borohydride reduction and deprotection, gave the target product in 14-50% yield. Finally, tin powder was used to reduce the anthraquinone to 2,6-diaminoanthrone in quantitative yield. This compound was further reduced to the target 2,6-diaminoanthracene in 55-65% yield.