First principles investigations of Fe,Co, Ni in model honeycomb carbon networks

The behaviors of ferromagnetic transition metals of the first period: Fe, Co and Ni are examined within density functional theory calculations in two dimensional carbon extended networks using model structure LiC₆. Around geometry optimized structures, the energy-volume equations of states considering non magnetic and spin polarized configurations established ferromagnetic ground states with magnetizations –reduced with respect to the metals’– of 2 μ_B for FeC₆ and 1 μ_B for CoC₆ while no magnetic solution could be identified for NiC₆. In the D_6h point group of the P6/mmm space group l_m decomposition of the d states results with increasing energy into doublet state E_1g with d(x²-y²) and d(xy); singlet state A_1g d(z²) and doublet state E_2g d(xz) and d(yz) lying on E_F and responsible of the onset of magnetic moments. This was mirrored via molecular orbital approach with a construct of Fe embedded between two extended carbon networks thus validating the model structure proposed for TC₆ compounds. The 100% polarization in one spin channel allows proposing potential uses in spintronics applications.     

Growth and characterization of two-dimensional crystals for communication and energy applications

This review article covers the growth and characterization of two-dimensional (2D) crystals of transition metal chalcogenides, h-BN, graphene, etc. The chemical vapor transport method for bulk single crystal growth is discussed in detail. Top-down methods like mechanical and liquid exfoliation and bottom-up methods like chemical vapor deposition and molecular beam epitaxy for mono/few-layer growth are described. The optimal characterization techniques such as optical, atomic force, scanning electron, and Raman spectroscopy for identification of mono/few-layer(s) of the 2D crystals are discussed. In addition, a survey was done for the application of 2D crystals for both creation and deterministic transfer of single-photon sources and photovoltaic systems. Finally, the application of plasmonic nanoantenna was proposed for enhanced solar-to-electrical energy conversion and faster/brighter quantum communication devices.     

过渡金属Co2+离子掺杂ZnS硫化物纳米晶制备与中红外发光特性研究

利用不含有机相的简单水热法制备了Co^2+∶ZnS纳米晶,纳米晶具有立方闪锌矿结构,平均晶粒尺寸约为8.3 nm,在808 nm激光泵浦下具有2~5μm波段的中红外荧光发射,中心波长位于3400 nm和4700 nm,分别对应Co^2+离子的4T2(F)→4 A 1(F)和4T1(F)→4T2(F)的能级跃迁.进一步将制备的纳米晶在还原气氛下进行800℃热处理,获得立方闪锌矿和纤锌矿混合晶型的纳米晶,平均晶粒尺寸增大到22.5 nm左右,热处理后的纳米晶表面羟基含量更低,中红外荧光发射强度显著提高.该Co^2+∶ZnS纳米晶的制备方法简单、在制备过程中不引入有机相等荧光淬灭中心,同时证明通过后热处理过程可以进一步减少表面缺陷及羟基含量,使荧光强度得到大幅提升.     

Pattern universes

In this essay we explore analogies between macroscopic patterns, which result from a sequence of phase transitions/instabilities starting from a homogeneous state, and similar phenomena in cosmology, where a sequence of phase transitions in the early universe is believed to have separated the fundamental forces from each other, and also shaped the structure and distribution of matter in the universe. We discuss three distinct aspects of this analogy: (i) Defects and topological charges in macroscopic patterns are analogous to spins and charges of quarks and leptons; (ii) Defects in generic 3+1 stripe patterns carry an energy density that accounts for phenomena that are currently attributed to dark matter; (iii) Space-time patterns of interacting nonlinear waves display behaviors reminiscent of quantum phenomena including inflation, entanglement and dark energy.     

Brownian motion with drift on spaces with varying dimension

Many properties of Brownian motion on spaces with varying dimension (BMVD in abbreviation) have been explored in Chen and Lou (2018). In this paper, we study Brownian motion with drift on spaces with varying dimension (BMVD with drift in abbreviation). Such a process can be conveniently defined by a regular Dirichlet form that is not necessarily symmetric. Through the method of Duhamel’s principle, it is established in this paper that the transition density of BMVD with drift has the same type of two-sided Gaussian bounds as that for BMVD (without drift). As a corollary, we derive Green function estimate for BMVD with drift.     

Laser control of magneto-polaron in transition metal dichalcogenides triangular quantum well

We study the dynamic of magneto-polaron condensate in monolayer two dimensional (2D) transition metal dichalcogenides (TMDs) materials of 2H types in triangular quantum well potential. Within both the quantum mechanical Schrödinger approach (QMSA) and the improved Wigner-Brillouin theory (IWBT), Landau energies levels (LELs) are derived. We have shown that the magneto-polaron condensation is enhanced in monolayer MoSe₂ compared to MoS₂, WS₂ and WSe₂. We derive various levels by increasing a magnetic field and laser parameter. We show that the quantum confinement lifts the degeneracy of the Landau levels (LLs) resulting in an anticrossing and crossing. The dephasing effect due to the quantum well potential's parameter plays an important role in the magneto-polaron energy corrections, which are also affected by the amplitude of the laser field. The system presents Stückelberg oscillations which is important for practical applications.     

Asymmetric electrosynthesis: Recent advances in catalytic transformations

Asymmetric synthesis is one of the most important and valuable research fields in modern organic chemistry. Since the use of electricity as a traceless oxidant or reductant under electrochemical conditions, highly reactive intermediates can selectively generate under mild reaction conditions through more environmentally benign conditions compared with the reactions using common chemical oxidants or reductants. Thus, the merging electrochemistry with asymmetric catalysis would provide a unique and powerful approach for the synthesis of optically active compounds under oxidative or reductive conditions. Selected recent (2018–2020) examples of enantioselective electro-organic synthesis using transition metal catalysts or organocatalysts are summarized in this short review. These examples are divided to oxidative and reductive transformations and described together with brief reaction mechanisms.     

High level ab initio,DFT, and RRKM calculations for the unimolecular decomposition reaction of ethylamine

Mechanisms for the decomposition reaction of ethylamine, CH₃CH₂NH₂, were investigated using ab initio, DFT, and RRKM calculations. Optimized geometries of reactants, transition states, intermediates, and products were determined at HF, MP2, and B3LYP levels of theory using the 6-31G(d) and 6-31+G(d) basis sets. Single point energies were also determined at G3MP2B3 and G3B3 levels of theory. Thermodynamic properties, activation energies, enthalpies and Gibbs energies of activation were calculated for each reaction pathway investigated. Intrinsic reaction coordinate (IRC) analysis was performed to characterize the transition states on the potential energy surface. The conformational change and planarity of the ethylamine moiety along with the twist angle of the amino group about the CN axis are examined. Four pathways for the decomposition reaction of ethylamine were studied. All pathways involve a 1,2-elimination reaction and 1,3-proton shift to produce ethene, ethanimine, ethenamine, and methanimine. All pathways are single-step mechanisms. Elimination of the NH₃ dominates the decomposition behavior up to 1200 K whereas after this temperature, secession of the C–N gradually holds more importance. While pathways signifying departures of NH₃ and NH₂ exhibit pressure-dependent behavior, branching ratios for these two channels are generally not influenced by variation in pressure higher than the atmospheric pressure.     

A health insurance pricing model based on prevalence rates: Application to critical illness insurance

The Italian health insurance market is currently undersized. The paucity of assured data and the discontinuous statistical surveys carried out by the National Institute of Statistics (ISTAT) represent one of the main obstacles to the insurance market development. The paper sets forth a parametric model to estimate technical basis for health insurance policies when data are limited and only aggregated information on mortality and morbidity is available. The probabilistic framework is based on a multiple state continuous and time inhomogeneous Markov model. We provide an estimate of transition intensities from the healthy state to the sickness state when only prevalence rates of sickness are available, according to an extension and modification of the methodology proposed in Olivieri (1996) for Long Term Care insurance. We assume that mortality intensity of both healthy and sick lives is modelled by two independent Gompertz–Makeham models.     

Dinuclear manganese,iron, chromium,and cobalt complexes derived from aroylhydrazone ligands: Synthetic strategies,crystal structures,and magnetic properties

Coordination clusters of 3d metals continue to attract the intense interest of the scientists from the synthetic inorganic chemistry, bioinorganic chemistry and molecular magnetism communities. We review here the synthetic strategies employed in a continuous effort to obtain new and potentially magnetically interesting dinuclear molecules based on iron, manganese, chromium, and cobalt metal ions. The reported systems are pure homometallic 3d materials. We have focused on describing aspects of the synthesis, the crystal structures and the magnetic behaviour of these coordination compounds with low nuclearity. A deep solid-state and magnetic characterization of these systems has allowed us to gain evidence regarding the role played by weak exchange interactions and geometrical factors on the slow dynamics of the magnetization. In addition, the analysis through ab initio calculations has provided a valuable insight into the influence of organic periphery, bridging ligands, and remote substituents on the exchange coupling constant (J). In the case of a dinuclear complex based on manganese, the largest ferromagnetic interaction between two Mn^III has been observed (J = 19.7 cm⁻¹).