Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

Purcell Effect and Nonlinear Behavior of the Emission in a Periodic Structure Composed of InAs Monolayers Embedded in a GaAs Matrix

Enhancement of spontaneous emission in a resonant Bragg quantum well (QW) structure with 60 periods of triple InAs monolayers embedded in a GaAs matrix is studied experimentally and theoretically. From measurements of the time‐resolved photoluminescence, besides the QW exciton at 1.47 eV, a specific super‐radiant (SR) emission demonstrating nonlinear properties is found. The SR mode shows a near‐quadratic dependence of intensity on excitation power, while its energy position follows the Bragg condition. It is revealed that the SR mode shows a peculiar non‐monotonic dependence of intensity on direction, with a maximum observed at approximately 40°. The enhancement in the SR emission at a specific direction is correlated well with suggested theoretical consideration of the modal Purcell factor for periodic quantum well structures.     

InAs/GaAs (1 1 1)A heteroepitaxial systems

We studied the structural, electrical, and mechanical properties of an InAs thin film grown on GaAs (1 1 1)A substrates by molecular beam epitaxy. In contrast to conventionally used (0 0 1) surfaces, where Stranski–Krastanov growth dominates the highly mismatched heteroepitaxy, layer-by-layer growth of InAs can be established. One of the largest advantages of this unique heteroepitaxial system is that it provides a two-dimensional electron gas system in the near-surface region without the problem of electron depletion. We review the fundamental properties and applications of this unique heteroepitaxial system.     

InAs/GaAs自组织量子点的DLTS谱

将DLTS用于对InAs/GaAsQD结构样品的测量,测定了QD能级发射载流子的热激活能;获得了QD能级俘获电子过程伴随有多声子发射(MPE)、QD能级存在一定程度的展宽、以及在某些特定的生长条件下,存在亚稳生长构形的实验证据.结果表明:DLTS在QD体系的研究中有其特有的功能     

Aharonov–Bohm oscillations observed in nanoscale open-dot structures fabricated in an InAs surface inversion layer

We fabricated nanoscale open-dot structures in an InAs surface inversion layer using an atomic-force-microscope oxidation process. Due to its superior nanofabrication capability, small open-dot structures with the feature size ranging between 100 and 300 nm were successfully fabricated. The magnetoresistance signal measured at 4.2 K showed reproducible fluctuations and a periodic oscillation component that varies in both amplitude and periodicity depending on the dot size. We show that the period of the oscillations corresponds to that of the Aharonov–Bohm effect and propose that the possible mechanism for the oscillations is due to the formation of a one-dimensional electron channel enclosing the open-dot structure as a result of the electron transfer from the InAs oxide to InAs.     

Magnetotransport and magnetic properties of InAs/Mn digital alloys

We have investigated the magnetic and magneto-transport properties of a systematic sequence of five InAs/Mn digital alloys grown by a combination of molecular beam epitaxy and atomic layer epitaxy. The samples consist of 30 periods of Mn fractional monolayers (ML) (0.17–0.5 ML) separated by 14 ML thick InAs spacer layers in a superlattice configuration. Four samples show n-type electrical conduction while the fifth (0.25 ML Mn) is p-type. Squid magnetization measurements performed on these samples show remnant magnetization above room temperature, which is apparently related to a second phase.     

Adsorption of amino acids on indium arsenide (1 0 0) surfaces: Assessment of passivation capabilities

Angle-Resolved X-ray Photoelectron Spectroscopy (ARXPS) was used to examine amino acid bonding and oxide removal on InAs(1 0 0) surfaces. Five amino acids were studied, including cysteine, lysine, aspartic acid, glutamic acid and arginine. Observations on the ability of specific functional groups to prevent oxide formation were made by examining the thickness of oxide films on the functionalize surfaces. Amino acids that possessed more than one functional group having resonance were shown to most effectively affect oxide formation. The influence of these groups on the electronic structure of InAs(1 0 0) provides insight into how multifunctional passivation strategies could be beneficial, as well as showing how biological molecules might affect detection when InAs(1 0 0) is used as a platform.     

Bound to continuum intersubband transition optical properties in the strain reducing layer-assisted InAs quantum dot structure

In this paper, the impact of wetting layer, strain reducing layer and dot height on the electronic, linear and nonlinear optical properties of bound to continuum states transitions are investigated in a system of InAs truncated conical shaped quantum dot covered with the In_xGa_1−x As strain reducing layer. The electronic structure, containing two main states of S and wetting layer states (WL), was calculated by solving one electronic band Hamiltonian with effective-mass approximation. The results reveal that the presence of the strain reducing layer in the structure extends the quantum dot emission to longer wavelength which is reported as a red-shift of the photoluminescence (PL) peak in the experimental measurement. This study also highlights the possibility of improving the intersubband optical properties based on the significant size-dependence of the three layer dot matrix by employing the strain reducing and wetting layers. According to this simulation, relatively tall dots on the thick wetting layer introduce the optimized structure size for practical applications to meet the SRL assisted enhanced dot structure.     

Investigation of the electrical and optical properties of InAs/InGaAs dot in a well solar cell

The electroreflectance (ER) and current–voltage (J–V) of InAs/InGaAs dots in a well (DWELL) solar cell (SC) were measured to examine the optical and electrical properties. To investigate the carrier capturing and escaping effects in the quantum dot (QD) states the above and below optical biases of the GaAs band gap were used. In the reverse bias region of the J–V curve, the tunneling effect in the QD states was observed at low temperature. The ideality factors (n) were calculated from the J–V curves taken from various optical bias intensities (I_ex). The changes in the ideality factor (n) and short circuit current (J_SC) were attributed mainly to carrier capture at low temperature, whereas the carrier escaping effect was dominant at room temperature. ER measurements revealed a decrease in the junction electric field (F_J) due to the photovoltaic effect, which was independent of the optical bias source at the same temperature. At low temperature, the reduction of photovoltaic effect could be explained by the enhancement carrier capturing effect due to the strong carrier confinement in QDs.     

Four-component superlattice empirical pseudopotential method for InAs/GaSb superlattices

For the design of InAs/GaSb superlattice (SL) heterojunction infrared photodetectors with very low dark current we have extended the standard two-component superlattice empirical pseudopotential method (SEPM) and implemented a four-component model including interface layers. For both models, the calculated bandgap values for a set of SL samples are compared to bandgaps determined by photoluminescence measurements. While the bandgap resulting from the two-component model agrees well with experimental data for SL structures with individual layer thicknesses of 7 monolayers and more, we show that for SLs with thinner GaSb layers the four-component SEPM model is accurate, when the As-content in the interface and barrier layers is included in the model.