Theoretical study of (e,2e) triple differential cross sections of pyrimidine and tetrahydrofurfuryl alcohol molecules using multi-center distorted-wave method

We report theoretical studies of electron impact triple differential cross sections of two bio-molecules,pyrimidine and tetrahydrofurfuryl alcohol,in the coplanar asymmetric kinematic conditions with the impact energy of 250 eV and ejected electron energy of 20 eV at three scattering angles of-5°,-10°,and-15°.Present multi-center distorted-wave method well describes the experimental data,which was obtained by performing(e,2e)experiment.The calculations show that the secondary electron produced by the primary impact electron is strongly influenced by the molecular ionic multi-center potential,which must be considered when the low energy electron interacts with DNA analogues.     

Strong Pancake 2e/12c Bond in π-Stacking Phenalenyl Derivatives Avoiding Bond Conversion

The nature of the 2e/12c bond and its conversion to a carbon-carbon single bond in phenalenyl dimers have prompted a great deal of interests recently. In this work, we theoretically investigated a series of π-stacking phenalenyl derivatives with 2e/12c bonding character by density functional theory (DFT) calculations to elucidate origin of this unusual bond conversion. Results show that bond-conversion of the phenalenyl dimer easily occurs at room-temperature both dynamically and thermodynamically. However, bond-conversion of hetero π-stacking adducts, in which the two center carbon atoms were substituted by boron and nitrogen atoms, respectively, is much more difficult, because the 2e/12c bond is stabilized by its charge transfer character. Consequently, the bond-conversion is an endothermic process, albeit with a low conversion barrier. Interestingly, Lewis acid-base interactions would be induced by substitution of the center nitrogen atom to phosphorus atom. The 2e/12c bond is further stabilized by 5.9 kcal mol⁻¹ and its conversion is also thermodynamically unfavorable.     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

Necessary and Sufficient Conditions for Weak Quasi Efficiency in Nonsmooth Multiobjective Problems

In this article, a multiobjective problem with a feasible set defined by inequality, equality and set constraints is considered, where the objective and constraint functions are locally Lipschitz. Several constraint qualifications are given and the relations between them are analyzed. We establish Kuhn-Tucker and strong Kuhn-Tucker necessary optimality conditions for (weak) quasi e?ciency in terms of the Clarke subdifferential. By using two new classes of generalized convex functions, su?cient conditions for local (weak) quasi e?cient are also provided. Furthermore, we study the Mond-Weir type dual problem and establish weak, strong and converse duality results.     

�Ǿֲ��������������˥���ٶ�

In this paper, the asymptotic behavior of the weak solution (u_t)_{t\ge0} to the non-local Cauchy problems as stated in (1) is considered. Only using lower bounds of jumping kernel J(x,y) for large |x-y|, it is obtained that \|u_t\|_p\le c(t)\|u_0\|_q with any 1\le q相似文献   

Resilient dissipative dynamic output feedback control for uncertain Markov jump Lur’e systems with time-varying delays

The resilient dissipative dynamic output feedback control problem for a class of uncertain Markov jump Lur’e systems with piecewise homogeneous transition probabilities and time-varying delays in the discrete-time domain are examined in this study. The designed controller can tolerate additive uncertainties in the controller gain matrix, which result from controller implementations. The time-varying delays are also supposed to be mode-dependent with lower and upper bounds known a priori. By constructing a Lyapunov–Krasovskii functional candidate, the sufficient conditions regarding the existence of desired resilient dissipative controllers are obtained in terms of linear matrix inequalities, thereby ensuring that the resulting closed-loop system is stochastically stable and strictly dissipative. Two numerical examples were established to illustrate the effectiveness of the proposed theoretical results.     

凝胶渗透色谱-气相色谱-离子阱质谱法测定桔梗原药和当归提取物中101种农药残留

建立了凝胶渗透色谱（GPC）-气相色谱-离子阱质谱同时检测桔梗原药和当归提取物中101种农药残留的分析方法。方法采用乙腈超声辅助提取桔梗原药和当归提取物,浓缩提取液至近干后用乙酸乙酯-环己烷（1∶1, v/v）复溶,采用凝胶渗透色谱法（选取40 cm长、内径20 mm的凝胶渗透色谱柱）对样品进行净化,弃去前段含脂类、色素等杂质的流出液,收集17~30 min洗脱液并旋转蒸发浓缩至近干,甲苯1 mL定容上机。选用DB-5MS毛细管色谱柱分离待测物,通过离子阱质谱实现对101种农药残留的高效检测。方法通过优化前处理条件和离子阱二级质谱参数,有效降低了复杂中药基质对待测化合物的干扰,最大限度提高了样品中农药的定量准确性和回收率,101种农药3水平添加的平均回收率为58.3%~108.9%,每个添加水平10次独立重复测定的相对标准偏差为0.4%~16.5%,检出限（LOD）范围为0.2~40.0 μg/kg,可满足当前韩国、日本、欧洲规定的最大残留限量（maximum residue limits, MRLs）要求。方法具有操作简单快速、灵敏度高、重复性好等特点,凝胶渗透色谱技术的应用克服了固相萃取小柱净化容量不足的弊端,离子阱技术的应用可以进一步排除共流出基体杂质的干扰,提高定量和定性的准确性,检测效果优于常用的气相色谱-质谱法,是对中药中同时分析多种农药残留检测方法的有益补充。     

非平衡溶剂化新理论在有机染料电子光谱中的应用

总结了非平衡溶剂化新理论和在量子化学软件Q-Chem中基于含时密度泛函理论(TD-DFT)实现溶剂效应下计算电子吸收和发射光谱的数值解方法.采用该方法计算了染料敏化太阳能电池(DSSCs)中三苯胺型有机染料■在真空和乙腈溶剂中的电子结构与光谱性质,研究发现,π共轭桥上碳碳双键的个数和溶剂效应会促进光电转换.     

中空碳纳米球的制备及VOCs吸附性能

首先, 在碱性条件下, 不使用表面活性剂, 采用St?ber小球法以正硅酸四乙酯(TEOS)和正硅酸四丙酯(TPOS)为硅源, 生成初级氧化硅球形颗粒; 然后, 使酚醛树脂(间苯二酚和甲醛)与球形氧化硅的羟基共缩合形成酚醛树脂-氧化硅复合材料; 最后, 经高温碳化和酸蚀获得了空心碳纳米球(HCNSs). 通过调节TEOS/TPOS的摩尔比获得了一系列具有良好的单分散性且粒径、 壁厚可调节的HCNSs, 其粒径和壁厚分别在280~430 nm和15~63 nm的范围内. 仅以TPOS为硅源时合成的HCNS-0/4具有较大的粒径(426 nm)和壁厚(63 nm)、 较高的比表面积(1216 m²/g)和孔容(0.508 cm³/g), 并且具有较大的挥发性有机化合物(VOCs)吸附性能, 其正己烷、 甲苯和油气的静态吸附容量分别为2.02, 1.42和0.926 g/g, 正己烷和甲苯的动态吸附容量分别为2.01 g/g和1.37 g/g, 均远高于商业化活性炭.