不同退火条件对PEALD制备的Ga2O3薄膜特性的影响

利用等离子增强原子层沉积技术(PEALD)在c面蓝宝石衬底上制备了氧化镓(Ga₂O₃)薄膜,研究了退火气氛(v(N₂)∶v(O₂)=1∶1(体积比)、空气和N₂)及退火时间对Ga₂O₃薄膜晶体结构、表面形貌和光学性质的影响。研究结果表明,退火前的氧化镓处于亚稳态,不同退火气氛下退火后晶体结构发生明显改变,而且退火气氛中N₂比例增加有利于Ga₂O₃重结晶。在N₂气氛下退火达到30 min,薄膜结构已由亚稳态转变成择优取向的β-Ga₂O₃。而且表面形貌分析表明,退火30 min后表面形貌开始趋于稳定,表面晶粒密度不再增加。另外实验样品在 400~800 nm的平均透射率几乎是100%,且光吸收边陡峭。采用N₂气氛退火,对于富氧环境下沉积的Ga₂O₃更利于薄膜表面原子迁移,以及择优取向Ga₂O₃重结晶。     

石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and "dead Li" have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

催化热解-冷原子吸收分光光度法测定大米中的汞含量

建立冷原子吸收分光光度法测定大米中汞含量的方法。采用DMA–80直接测汞仪,大米样品经干燥、分解灰化、还原等过程,直接进入冷原子吸收光谱仪进行测量。干燥温度为200℃,热解温度为650℃。该方法的检出限为0.001 ng/g,加标回收率为85.0%～99.2%,测定结果的相对标准偏差为0.25%～3.70%(n=6)。利用标准物质和原子荧光法进行比对试验,测定结果均在误差范围内。该方法测定结果准确,灵敏度高,重现性好,适用于大米中汞含量的测定。     

一种锚泊条件下捷联惯导系统级标定方法

捷联惯导的误差参数标定,一般是在实验室静基座或外场轻微晃动干扰基座下进行的,不能满足舰船出海期间在锚泊条件下对捷联系统进行标定的需求。针对此问题,提出了一种舰船锚泊条件捷联系统级标定方法。通过设置合适的卡尔曼滤波器量测误差参数和延长系统级标定时间,来减小锚泊运动的影响,使系统级标定结果准确稳定。通过设置不同的惯导系统误差,进行多次锚泊条件系统级标定仿真,对所提方法进行验证。仿真结果表明,在经过系统级标定后,加速度计零偏误差小于10μg,陀螺和加速度计的刻度系数误差小于30ppm,两者的安装误差角小于10'。舰船锚泊条件系统级标定方法可以在舰船出海后不依赖外部测量信息标定惯导的部分参数,具有一定的应用参考价值。     

单位圆内解析函数和整函数四则运算的精确级和精确型

利用Nevanlianna值分布对具有精确级整函数与单位圆内的解析函数,具有相同增长级和不同型的整函数和解析函数f1（z）与f2（z）四则运算后的精确级、级、精确型和型进行了研究,得到了一些结果,完善了原有的一些结论。     

正电子冲击下氦电离三重微分截面的理论计算

我们发展了一种正电子碰撞原子电离的畸变波Born近似方法， 在这个方法中，正负电子偶素通道通过一个ab initio的光学势附加到入射粒子和靶的相互作用势上，且通道对电离作用被第一次被考虑在正电子碰撞原子电离的过程中. 应用这个方法计算了在50 eV入射能量范围氦的电离的三重微分截面，计算结果和实验数据很好的符合.     

三能级钾原子气体三维傅里叶变换频谱的解析解

利用投影切片定理、傅里叶位移定理和误差函数给出三能级钾原子气体三维傅里叶变换频谱在T=0界面的解析解.固定均匀线宽,非均匀展宽和对角线相关系数可以定量地识别,通过在适当方向上拟合三维傅里叶变换频谱谱峰的切片来确定.结果表明,非均匀展宽增大,频谱图沿着对角线方向延伸,对角线相关系数增大,频谱图逐渐变圆,振幅也逐渐变小.     

硼原子掺杂对碳纳米管吸附Ne原子影响的第一性原理计算

采用基于第一性原理的密度泛函理论（DFT）和局域密度近似（LDA）方法，优化计算得到碳纳米管（CNT），硼原子取代碳原子及其吸附氖原子前后系统的几何结构，能量，电子能带和态密度。结果显示，碳纳米管的能带结构与石墨的层状几何结构相似，能量的变化只在kz=0和kz=0.5平面之间沿着c轴方向出现。B原子取代C原子使价带和导带分别分裂为两个和三个能带。对Ne原子的吸附使价带能量沿着c轴方向升高并导致Fermi面附近的态密度下降。Ne原子的吸附在谷位H最稳定，顶位A其次。C-C间σ键的弯曲使Ne原子吸附在桥位b1比桥位b2处更为稳定。Ne原子在管外的吸附均为放热过程，而管内则为吸热过程。结构分析表明Ne原子对C原子有排斥作用，对B原子却具有吸引作用。B原子取代C原子的位置略凸出于CNT的管壁之外，使Ne原子的吸附能增加。     

基于灰色关联分析的煤矸石集料级配影响因素研究

为了对煤矸石集料级配作用进行深入研究,采取煤矸石集料空隙率作为评价指标.试验采用粒径0.16~26.5mm的集料,采用最大密度曲线公式确定煤矸石集料的颗粒级配范围,通过调整最大密度曲线n值,确定集料中各粒径组的比例,结合集料的空隙率,运用灰色关联分析各粒径组比例对集料空隙率的影响.研究结果表明:煤矸石粗集料对空隙率的影响大于煤矸石细集料的影响,当n=0.56时,煤矸石集料的空隙率最小,粗集料的骨架作用和细集料的支承作用最好.