Printed Circuit Board-Based Electrolyte Regulator for Laminar Microfluidics

The trench on a printed circuit board was reconstructed to fabricate a microfluidic framework that allows low-cost production for small quantities and integration with multifunctional elements. An on-chip electrolyte regulator was thus proposed on this platform to analyze diffusion properties in laminar flow. A numerical model was developed, highlighting the interplay between the electrolyte migration and hydrodynamic properties. Solutions with dissolved sodium chloride were simulated and experimentally tested for the regulation of electrical conductivity under the guidance of the normalized Nernst-Planck equation. The diffusion mechanism and the resulting concentration field were demonstrated in detail. This approach provides a satisfactory manufacturing method and a useful tool for integrated microfluidic systems.     

Supercritical fluid extraction of lipids from linseed with on-line evaporative light scattering detection

Supercritical fluid extraction (SFE) is a green alternative method of extraction for neutral lipids in seeds compared to conventional methods utilizing organic solvents. In this work, a novel method where SFE is hyphenated with an evaporative light scattering detector is presented. The method was subsequently applied to determine lipid content in crushed linseed. The new method enables rapid quantification of extracted lipids as well as be ability to continuously monitor the extraction rate in real-time, thus being able to determine the time point of completed extraction.     

Chrysin Derivative CM1 and Exhibited Anti-Inflammatory Action by Upregulating Toll-Interacting Protein Expression in Lipopolysaccharide-Stimulated RAW264.7 Macrophage Cells

Although our previous study revealed that gamma-irradiated chrysin enhanced anti-inflammatory activity compared to intact chrysin, it remains unclear whether the chrysin derivative, CM1, produced by gamma irradiation, negatively regulates toll-like receptor (TLR) signaling. In this study, we investigated the molecular basis for the downregulation of TLR4 signal transduction by CM1 in macrophages. We initially determined the appropriate concentration of CM1 and found no cellular toxicity below 2 μg/mL. Upon stimulation with lipopolysaccharide (LPS), CM1 modulated LPS-stimulated inflammatory action by suppressing the release of proinflammatory mediators (cytokines TNF-α and IL-6) and nitric oxide (NO) and downregulated the mitogen-activated protein kinase (MAPK) and nuclear factor-κB (NF-κB) signaling pathways. Furthermore, CM1 markedly elevated the expression of the TLR negative regulator toll-interacting protein (Tollip) in dose- and time-dependent manners. LPS-induced expression of cell surface molecules (CD80, CD86, and MHC class I/II), proinflammatory cytokines (TNF-α and IL-6), COX-2, and iNOS-mediated NO were inhibited by CM1; these effects were prevented by the knockdown of Tollip expression. Additionally, CM1 did not affect the downregulation of LPS-induced expression of MAPKs and NF-κB signaling in Tollip-downregulated cells. These findings provide insight into effective therapeutic intervention of inflammatory disease by increasing the understanding of the negative regulation of TLR signaling induced by CM1.     

软管流量调节器调节特性分析及设计准则

分析了大雷诺数下软管的流量调节行为；导出了流量随下游压力的函数关系，即流量调节特性曲线；提出了以软管作为能动元件的流量调节器设计准则．     

Linear quadratic regulator for laser beam shaping

The performance of an adaptive optics system depends on multiple factors, including the quality of the laser beam before being projected to the mesosphere. In general, cumbersome procedures are required to optimize the laser beam in terms of amplitude and phase. However, aberrations produced by the optics of the laser beam system are still detected during the operations due to, for example, uncertainty in the utilized models. In this paper we propose the use of feedback to overcome the presence of model uncertainty and disturbances. In particular we use a Linear Quadratic Regulator (LQR) for closed loop laser beam shaping using a setup of two deformable mirrors. The proposed method is studied and simulated to provide an automatic optimization of the Amplitude of the laser beam. The performance of the LQR control algorithm is evaluated via numerical simulations using the root mean square error (RMSE). The results show an effective amplitude correction of the laser system aberrations after 20 iterations of the algorithm, a RMSE less than 0.7 was obtained, with about 140 actuators per mirror and a separation of z=3 [m] among the mirrors.     

Herbicidal ionic liquid with dual-function

Herbicidal ionic liquid with dual functions has been synthesized and characterized (properties, chemical stability and biological activity). 2-Chloroethyltrimethylammonium (4-chloro-2-methylphenoxy)acetate prepared in an alkaline environment undergoes the reaction of dehydrochlorination by the E2 mechanism. This may be described as a specific instance of providing third generation ILs with high potential of application, which preserve both pesticidal properties: the herbicidal activity due to their anions and plant growth inhibition effect due to their cations.     

CRBN调节剂Avadomide的合成工艺优化

Avadomide是处于Ⅱ期临床阶段用于治疗晚期实体瘤的潜在药物,本文对其合成工艺进行了研究,并对重要中间体的合成工艺进行了优化。以3-硝基邻苯二甲酰亚胺为起始原料,依次经开环、霍夫曼降解、环化、酯的氨解反应、氢氧化钯/碳加氢还原反应得到Avadomide,总收率为46.9%,产物结构经~1H NMR、~(13)C NMR和HRMS表征,纯度经HPLC检测为99.5%。优化后的工艺路线具有反应条件温和、后处理简单、产率高、可操作性强等特点,更适合Avadomide的工业化生产。     

Non-probabilistic reliability method and reliability-based optimal LQR design for vibration control of structures with uncertain-but-bounded parameters

Uncertainty is inherent and unavoidable in almost all engineering systems. It is of essential significance to deal with uncertainties by means of reliability approach and to achieve a reasonable balance between reliability against uncertainties and system performance in the control design of uncertain systems. Nevertheless, reliability methods which can be used directly for analysis and synthesis of active control of structures in the presence of uncertainties remain to be developed, especially in non-probabilistic uncertainty situations. In the present paper, the issue of vibration con- trol of uncertain structures using linear quadratic regulator （LQR） approach is studied from the viewpoint of reliabil- ity. An efficient non-probabilistic robust reliability method for LQR-based static output feedback robust control of un- certain structures is presented by treating bounded uncertain parameters as interval variables. The optimal vibration con- troller design for uncertain structures is carried out by solv- ing a robust reliability-based optimization problem with the objective to minimize the quadratic performance index. The controller obtained may possess optimum performance un- der the condition that the controlled structure is robustly re- liable with respect to admissible uncertainties. The proposed method provides an essential basis for achieving a balance between robustness and performance in controller design ot uncertain structures. The presented formulations are in the framework of linear matrix inequality and can be carried out conveniently. Two numerical examples are provided to illustrate the effectiveness and feasibility of the present method.