Tensile properties of microtubules: A study by nonlinear molecular structural mechanics modelling

A nonlinear molecular structural mechanics (MSM) model is proposed in this paper for studying the tensile properties of microtubules (MTs). In the nonlinear MSM models, the interactions between tubulin monomers in MTs are treated as nonlinear axial and torsional springs, whose stiffness coefficients are extracted from all-atom molecular dynamics simulations. The Young's modulus and fracture properties of MTs under tension extracted from the present nonlinear MSM models are found to agree well with the existing simulation and experiment results, which shows the efficiency and accuracy of the proposed nonlinear MSM models. In addition, the nonlinear MSM models are also extended to investigate the tensile properties including Young's modulus and fracture strain of MTs possessing lattice defects. The results obtained from nonlinear MSM models are utilized to develop a predictive equation for quickly predicting the tensile properties of MTs with different lattice defect levels.     

The deformation and fracture of balloons

Inflation of balloons provides a straightforward way of achieving large biaxial deformations. Previous studies have shown that when a balloon bursts, crack propagation occurs at very high speed – much higher than would be expected from the low strain modulus and elastic wave velocity of the rubber. The present paper is concerned with studies of the deformation and fracture of cylindrical balloons. On inflation, the deformations of such a balloon pass through an unstable region but subsequently increase monotonically with pressure. In this relatively high pressure region, the ratio of the longitudinal and circumferential extension ratios is broadly in accord with expectations from high-strain elasticity theory when the ratio of the corresponding stresses is taken into account. On bursting, crack speeds up to around 300 m/s in this region. It is shown that these speeds are in accord with large increase in incremental moduli for the highly-strained rubber. Marked changes in crack tip profile observed at very high crack speeds are consistent with control of the rate of growth by inertia rather than by the viscoelastic properties of the rubber (as is believed to be the case at lower speeds). Consistent with this, various elastomers having different glass transition temperatures show similar crack growth behaviour in the very high speed region.     

Existence of strong minimizers for the Griffith static fracture model in dimension two

We consider the Griffith fracture model in two spatial dimensions, and prove existence of strong minimizers, with closed jump set and continuously differentiable deformation fields. One key ingredient, which is the object of the present paper, is a generalization to the vectorial situation of the decay estimate by De Giorgi, Carriero, and Leaci. This is based on replacing the coarea formula by a method to approximate $SB{D}^p$ functions with small jump set by Sobolev functions, and is restricted to two dimensions. The other two ingredients will appear in companion papers and consist respectively in regularity results for vectorial elliptic problems of the elasticity type and in a method to approximate in energy $GSB{D}^p$ functions by $SB{V}^p$ ones.     

A brittle material with tunable elasticity: Crêpe paper

We study the mechanical response, and tearing features of crêpe paper, a two-dimensional, very anisotropic material, with one direction much less stiff than the other one. Depending on how the soft direction has been pre-stretched or not, the apparent Young modulus of the material can be varied over a broad range, while its fracture energy remains unaltered. The classical tearing concertina problem shows that a macroscopic measurement (the shape of the teared region) provides a direct access to the fracture properties of the material (effective Young's modulus, and fracture energy). The overall discussion is conducted in the frame of Griffith's theory of fracture.     

Synthesis and Characterization of Novel Liquid Crystalline Epoxy Resin with Low Melting Point

A liquid crystalline epoxy resin (LCE) having α-methylstilbene as a mesogenic unit and an ethylene-oxy unit as a spacer (DGE(C2-MS-C2)) was synthesized and characterized. DGE (C2-MS-C2) has a lower melting point (MP) compared to the diglycidylether of 4,4′-dihydroxy-α-methylstilbene (DGEDHMS). The curing of DGE (C2-MS-C2) with diaminodiphenylethane (DDEt) in a mesophase generated a liquid crystalline (LC) network, which have a more highly layered structure than DGEDHMS. The LC network showed extensively large fracture energy on a tensile test. Introducing spacers outside the mesogen unit promotes the mesogen unit to form a highly ordered structure, which enhances the versatility of LC epoxy resins.     

Fracture toughness assessment of polypropylene random copolymer with multiple stress modes using the essential work of fracture theory

In recent years, the essential work of fracture (EWF) method has been extensively employed for assessing a material's toughness by specific essential fracture work, especially for polymers showing ductile failure. However, most research has studied either the in-plane stress mode or the out-of-plane stress mode. To obtain a more in-depth understanding of the EWF theory, the specific essential and non-essential fracture work of polypropylene random copolymer (PP-R) was investigated in both in-plane stress mode and out-of-plane stress mode. The effects of ligament length, amount of pre-cracking and pre-cracking method on the specific essential and non-essential fracture work were explored. The specific essential fracture work obtained in both stress modes is compared and discussed.     

Infrared thermographic evaluation of large composite grid parts subjected to axial loading

Many composite parts, such as laminated panels and grid-like shells, operate under high mechanical loading. Evaluation of their structural integrity is crucial to ensure the long-lasting operation of critical components. Since testing a structure under full or “proof” load might be dangerous for personnel, it would be preferable to use a remote, rapid inspection technique. This paper describes a practical application of IR thermography to the inspection of large composite parts used in the aerospace industry. This work has used just one cycle of increasing load from zero load to failure, and this was done for both for tensile and compressive loads. It is shown that, during the formation of micro-defects in polymeric composites, about 40 % of the total dissipated energy is expended for material heating, while about 60 % is related to material damage accompanied by an increase in the defect concentration. Non-uniform composite deformation causes temperature anomalies, whose amplitude may reach 1.5–2.5 °C at a load of about 50–60 % of the limit load.     

嵌段共聚物相容剂对聚合物共混体系力学性能影响的连续介观模拟

结合介观动力学方法和三维弹簧格子模型, 研究了嵌段共聚物相容剂对相容性较差的聚合物二元共混体系力学性能的影响. 在适当范围内不断增加嵌段共聚物相容剂的用量, 研究了相容剂含量对体系杨氏模数及拉伸强度的影响, 同时也对不同体系材料的破碎位点进行了分析. 结果表明, 未加入相容剂的二元共混体系在拉伸模拟中表现出较低的拉伸强度, 而适量添加相容剂可以显著提升材料的拉伸强度, 随着相容剂含量的增加, 共混体系的破碎位点会发生转移并最终改善材料的整体性能. 而相容剂的加入对体系杨氏模数的影响较小. 该连续模拟方法为关联聚合物复合体系的微观结构和宏观力学性能提供了一条高效的途径.     

A centrally cracked thin circular disk, Part I: 3D Elastic–plastic finite element analysis

A full field solution, based on small deformation, three-dimensional elastic–plastic finite element analysis of the centrally cracked thin disk under mode I loading has been performed. The solution for the stresses under small-scale yielding and lo!cally fully plastic state has been compared with the HRR plane stress solution. At the outside of the 3D zone, within a distance of rσ_o/J=18, HRR dominance is maintained in the presence of a significant amount of compressive stress along the crack flanks. Ahead of this region, the HRR field overestimate the stresses. These results demonstrate a completely reversed state of stress in the near crack front compared to that in the plane strain case. The combined effect of geometry and finite thickness of the specimen on elastic–plastic crack tip stress field has been explored. To the best of our knowledge, such an attempt in the published literature has not been made yet. For the qualitative assessment of the results some of the field parameters have been compared to the available experimental results of K, gives a fair estimate of the crack opening stress near the crack front at a distance of order 10⁻² in. On the basis of this analysis, the Linear Elastic Fracture Mechanics approach has been adopted in analyzing the fatigue crack extension experiments performed in the disk (Part II).     

Effective elastic moduli of two dimensional solids with distributed cohesive microcracks

Effective elastic properties of a defected solid with distributed cohesive micro-cracks are estimated based on homogenization of the Dugdale–Bilby–Cottrell–Swinden (Dugdale–BCS) type micro-cracks in a two dimensional elastic representative volume element (RVE).Since the cohesive micro-crack model mimics various realistic bond forces at micro-scale, a statistical average of cohesive defects can effectively represent the overall properties of the material due to bond breaking or crack surface separation in small scale. The newly proposed model is distinctive in the fact that the resulting effective moduli are found to be pressure sensitive.