片段化森林中檵木幼苗种内叶经济性状变异及其驱动因子

在异质性生境中，种内功能性状变异有助于植物对环境的适应，进而影响种群更新、群落构建和生态系统过程。探讨了种内叶经济性状的变异及受生境异质性的塑造情况。以千岛湖片段化生境中的常见种檵木（Loropetalum chinense）的幼苗为研究对象，测定了200株檵木幼苗个体水平的7个叶经济性状（比叶面积SLA、叶全碳量C、叶全氮量N等）及其对应的生境因子（郁闭度、土壤全碳量、土壤全氮量等），采用相关性检验、主成分分析和线性混合效应模型等方法探讨片段化森林中檵木幼苗的种内叶经济性状变异及生境异质性对该变异的驱动作用。结果显示：（1） 在7个叶经济性状所构成的21对相关性分析中，有12对显著相关。经主成分分析降维后，主成分1（PC1）占性状总变异的43.02%，主要与比叶面积、叶绿素浓度、叶全氮量呈正相关，与叶干物质质量分数和叶碳氮比呈负相关，体现了檵木的种内叶经济谱，可反映叶片的最大光合效率。（2）片段化对生境条件和叶经济性状均有影响。岛屿森林群落的郁闭度显著低于大陆。相对于大陆，岛屿中的檵木幼苗趋向于更小的PC1值（缓慢投资-收益策略）；大岛边缘较大岛内部偏向于更小的PC1值。（3）生境因子中，郁闭度对PC1具有显著正效应。研究表明，片段化生境中的檵木在幼苗阶段存在叶经济谱，生境片段化可通过影响生境条件进而改变檵木幼苗的叶经济性状。随着生境片段化程度的加剧，檵木幼苗的叶经济性状逐渐向缓慢投资-收益策略靠拢。     

h-ADAPTIVITY ANALYSIS BASED ON MULTIPLE SCALE REPRODUCING KERNEL PARTICLE METHOD

IntroductionAs one of the meshfree methods, multiple scale reproducing kernel particle method(RKPM)[1,2]bears, besides the common features of all meshfree methods, a uniqueinherent feature of multiresolution analysis by which the structural response can b…     

ADAPTIVE MESHLESS METHOD BASED ON LOCAL FIT TECHNOLOGY

An h-adaptive meshless method is proposed in this paper. The error estimation is based on local fit technology, usually confined to Voronoi Cells. The error is achieved by comparison of the computational results with smoothed ones, which are projected with Taylor series. Voronoi Cells are introduced not only for integration of potential energy but also for guidance of refinement.New nodes are placed within those cells with high estimated error. At the end of the paper, two numerical examples with severe stress gradient are analyzed. Through adaptive analysis accurate results are obtained at critical subdomains, which validates the efficiency of the method.     

小波变换在湍流数值研究中的应用

小波变换具有时空双局部性特点,恰好适应了湍流特性。本文主要阐述了小波在湍流数值计算中的两大研究进展:一个是利用连续小波(高斯小波)可使L ap lace算子降阶的特性来求解N-S方程;另一个是正交小波与有限元法相结合的方法——相干涡模拟。指出它们的优缺点及其存在的问题,并对小波在湍流计算中的应用前景作了展望。     

CONTINUUM TOPOLOGY OPTIMIZATION FOR MONOLITHIC COMPLIANT MECHANISMS OF MICRO-ACTUATORS

A multi-objective scheme for structural topology optimization of distributed compliant mechanisms of micro-actuators in MEMS condition is presented in this work, in which mechanical flexibility and structural stiffness are both considered as objective functions. The compliant micro-mechanism developed in this way can not only provide sufficient output work but also have sufficient rigidity to resist reaction forces and maintain its shape when holding the work-piece. A density filtering approach is also proposed to eliminate numerical instabilities such as checkerboards, mesh-dependency and one-node connected hinges occurring in resulting mechanisms. SIMP is used as the interpolation scheme to indicate the dependence of material modulus on element-regularized densities. The sequential convex programming method, such as the method of moving asymptotes (MMA), is used to solve the optimization problem. The validation of the presented methodologies is demonstrated by a typical numerical example.     

Investigation of unique hue setting changes with ageing

Clromatic sensitivity along the protan, deutan, and tritan lines and the loci of the unique hues (red, green, yellow, blue) for a very large sample (n = 185) of colour-normal observers ranging from 18 to 75 years of age are assessed. Visual judgments are obtained under normal viewing conditions using colour patches on self-luminous display under controlled adaptation conditions. Trivector discrimination thresholds show an increase as a function of age along the protan, deutan, and tritan axes, with the largest increase present along the tritan line, less pronounced shifts in unique hue settings are also observed. Based on the chromatic (protan, deutan, tritan) thresholds and using scaled cone signals, we predict the unique hue changes with ageing. A dependency on age for unique red and unique yellow for predicted hue angle is found. We conclude that the chromatic sensitivity deteriorates significantly with age, whereas the appearance of unique hues is much less affected, remaining almost constant despite the known changes in the ocular media.     

双压电片变形反射镜样镜的设计与研制

双压电片变形反射镜作为波前校正器具有结构简单、变形量大、成本低及制造周期短的优点,能代替传统分立式变形镜从而降低自适应光学系统的成本.为验证工艺的可行性和了解双压电片变形反射镜的性能,制造了一块20单元的试验样镜.样镜采用了双层压电陶瓷的结构,其中一层作整体离焦电极以校正大幅值的离焦像差.利用Veeco干涉仪测最了样镜单元电极影响函数,分析了其埘前36项Zernike像差的校正能力.结果表明,样镜对离焦像差能获得高达8μm以上的校正量,对其它高阶像差也能适量校正,但校正能力随空间频率升高而降低,显示出其适合校正低阶像差的特性.此外,讨论了不同有效孔径下样镜对Zernike像差的拟合能力.     

教会学生算利息

为了适应商品经济的需要，初中数学教材中安排了单利计算利息和税收的内容。     

飞行器上层大气层空气动力特性探讨

针对近地轨道飞行器所面临的上层大气层（100~300 km）空气动力学问题,对几类典型航天器构型的上层大气层气动力特性进行了分析,给出了典型气动布局在该空域的气动力基本规律,取得了对上层大气层气动力关键影响因素的初步认识.在上层大气层,飞行器的绕流属于自由分子流状态.研究发现,气体分子与不同材质物面的相互作用反映出截然不同的升力和阻力特性.对于1 m2气动受力面的飞行器,在100~200 km轨道高度存在大于1 mN的气动力,在接近300 km轨道高度时受到的气动力则远小于1 mN.在一般条件下,飞行器的升阻比小于1.但是,当物面适应系数约为0.2时,在100~200 km轨道高度存在升阻比大于1的状态,这一特点体现了上层大气层气动力学的基本特性.据此认为,100~200 km是气动力可利用的飞行空域,在此空域开展上层大气层空气动力学研究,对于未来发展上层大气层飞行器意义重大.      

带吸收系数的正倒向随机微分方程的可解性

利用叠代估计方法研究带吸收系数的正倒向随机微分方程的可解性,在正向随机微分方程的扩散系数可以退化的情形下,证明了适应解的存在性和唯-性,也研究这类正倒向随机微分方程与偏微分方程的联系.