Growth and characterization of two-dimensional crystals for communication and energy applications

This review article covers the growth and characterization of two-dimensional (2D) crystals of transition metal chalcogenides, h-BN, graphene, etc. The chemical vapor transport method for bulk single crystal growth is discussed in detail. Top-down methods like mechanical and liquid exfoliation and bottom-up methods like chemical vapor deposition and molecular beam epitaxy for mono/few-layer growth are described. The optimal characterization techniques such as optical, atomic force, scanning electron, and Raman spectroscopy for identification of mono/few-layer(s) of the 2D crystals are discussed. In addition, a survey was done for the application of 2D crystals for both creation and deterministic transfer of single-photon sources and photovoltaic systems. Finally, the application of plasmonic nanoantenna was proposed for enhanced solar-to-electrical energy conversion and faster/brighter quantum communication devices.     

Reversible Activation of Water by an Air- and Moisture-Stable Frustrated Rhodium Nitrogen Lewis Pair

[Cp*Rh(κ³N,N′,P- L )][SbF₆] (Cp*=C₅Me₅), bearing a guanidine-derived phosphano ligand L , behaves as a “dormant” frustrated Lewis pair and activates H₂ and H₂O in a reversible manner. When D₂O is employed, a facile H/D exchange at the Cp* ring takes place through sequential C(sp³)−H bond activation.     

Exactly solvable chain of interacting electrons with correlated hopping and pairing

A generalization of the Mattis-Nam model Mattis and Nam (1972) [7], which takes into account a correlated hopping and pairing of electrons, is proposed, its exact solution is obtained. In the framework of the model the stability of the zero energy Majorana fermions localized at the boundaries is studied in the chain in which electrons interact through both the on-site Hubbard interaction and the correlated hopping and pairing. The ground-state phase diagram of the model is calculated, the region of existence of topological states is determined. It is shown that low-energy excitations destroy bonds between electrons in the chain, leading to an insulator state.     

Subdirectly irreducible medial quandles

We describe all subdirectly irreducible medial quandles. We show that they fall within one of four disjoint classes. In particular, in the finite case they are either connected (and therefore Alexander quandles) or reductive. Moreover, we provide a representation of all non-connected subdirectly irreducible medial quandles.     

Hydroxyl Radical Generation and DNA Nuclease Activity: A Mechanistic Study Based on a Surface‐Immobilized Copper Thioether Clip‐Phen Derivative

Coordination compounds of copper have been invoked as major actors in processes involving the reduction of molecular oxygen, mostly with the generation of radical species the assignment for which has, so far, not been fully addressed. In the present work, we have carried out studies in solution and on surfaces to gain insights into the nature of the radical oxygen species (ROS) generated by a copper(II) coordination compound containing a thioether clip‐phen derivative, 1,3‐bis(1,10‐phenanthrolin‐2‐yloxy)‐N‐(4‐(methylthio)benzylidene)propan‐2‐amine (2CP‐Bz‐SMe), enabling its adsorption/immobilization to gold surfaces. Whereas surface plasmon resonance (SPR) and electrochemistry of the adsorbed complex indicated the formation of a dimeric Cu^I intermediate containing molecular oxygen as a bridging ligand, scanning electrochemical microscopy (SECM) and nuclease assays pointed to the generation of a ROS species. Electron paramagnetic resonance (EPR) data reinforced such conclusions, indicating that radical production was dependent on the amount of oxygen and H₂O₂, thus pointing to a mechanism involving a Fenton‐like reaction that results in the production of OH^..     

Porous shape memory polymers: Design and applications

Porous shape memory polymers (SMPs) exhibit geometric and volumetric shape change when actuated by an external stimulus and can be fabricated as foams, scaffolds, meshes, and other polymeric substrates that possess porous three-dimensional macrostructures. These materials have applications in multiple industries such as textiles, biomedical devices, tissue engineering, and aerospace. This review article examines recent developments in porous SMPs, with a focus on fabrication methods, methods of characterization, modes of actuation, and applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1300–1318     

Creating Coordination‐Based Cavities in a Multiresponsive Supramolecular Gel

Creating cavities in varying levels, from molecular containers to macroscopic materials of porosity, have long been motivated for biomimetic or practical applications. Herein, we report an assembly approach to multiresponsive supramolecular gels by integrating photochromic metal–organic cages as predefined building units into the supramolecular gel skeleton, providing a new approach to create cavities in gels. Formation of discrete O‐Pd₂L₄ cages is driven by coordination between Pd²⁺ and a photochromic dithienylethene bispyridine ligand (O‐PyFDTE). In the presence of suitable solvents (DMSO or MeCN/DMSO), the O‐Pd₂L₄ cage molecules aggregate to form nanoparticles, which are further interconnected through supramolecular interactions to form a three‐dimensional (3D) gel matrix to trap a large amount of solvent molecules. Light‐induced phase and structural transformations readily occur owing to the reversible photochromic open‐ring/closed‐ring isomeric conversion of the cage units upon UV/visible light radiation. Furthermore, such Pd₂L₄ cage‐based gels show multiple reversible gel–solution transitions when thermal‐, photo‐, or mechanical stimuli are applied. Such supramolecular gels consisting of porous molecules may be developed as a new type of porous materials with different features from porous solids.     

二维胶体玻璃中玻色峰与结构无序度的关联

本文从实验上研究了胶体玻璃在相同面密度下随着体系结构无序程度的增加, 振动态密度和玻色峰的变化规律. 通过调制两种不同粒径的温敏性水凝胶的数量比来改变体系的无序程度. 通过分析无序体系的声子模式得到体系的振动特性. 研究发现, 随着无序度的增加, 态密度在低频区域增强、玻色峰增高、玻色峰的峰值向低频区域移动. 不同无序程度的样品引起玻色峰的低频声子模式都表现出准局域的特点, 且低频准局域声子模式与样品中无序结构存在关联.     

Lossy mode resonance-based uniform core tapered fiber optic sensor for sensitivity enhancement

A lossy mode resonance (LMR)-supported fiber optic sensor in which a uniform fiber core is placed among two identical tapered regions, is investigated numerically. Indium tin oxide (ITO) and aluminum-doped zinc oxide (AZO) are considered as LMR active materials used to excite several lossy modes and gold and silver are used as surface plasmon resonance (SPR) active materials. In this probe design, a central uniform core coated with ITO/AZO is the active sensing region, whereas tapered regions are meant for bringing the incident angle close to the critical angle. The sensitivity of the present fiber optic bio-sensor is evaluated for first two LMRs utilizing both ITO and AZO separately, along with its variation with the taper ratio (TR). For ITO, the maximum sensitivity values are observed to be 18.425 μm RIU⁻¹ (refractive index unit) and 0.825 μm RIU⁻¹, corresponding to the first and second LMRs, respectively, at a TR of 1.6 and for AZO, equivalent values are 0.79 μm RIU⁻¹ and 0.35 μm RIU⁻¹, respectively, at a TR of 2.0. The results illustrate that the first LMR is more sensitive than the second LMR and the ITO-coated probe possesses greater sensitivity than the AZO-coated probe for both LMRs. Similarly, for the fiber optic SPR sensor, the maximum value of sensitivity is 5.6425 μm RIU⁻¹, in the case of gold and 5.0615 μm RIU⁻¹ in the case of silver, at a TR of 1.6. Hence, the result shows that the sensor with the present fiber optic probe design has around a 3-fold enhancement in sensitivity compared with conventional SPR sensors. This study will have applications in many sensing schemes where the requirement of large sensitivity is vital.     

Nonlinear edge modes in a honeycomb electrical lattice near the Dirac points

We examine - both experimentally and numerically - a two-dimensional nonlinear driven electrical lattice with honeycomb structure. Drives are considered over a range of frequencies both outside (below and above) and inside the band of linear modes. We identify a number of discrete breathers both existing in the bulk and also (predominantly) ones arising at the domain boundaries, localized either along the arm-chair or along the zig-zag edges. The types of edge-localized breathers observed and computed emerge in distinct frequency bands near the Dirac-point frequency of the dispersion surface while driving the lattice subharmonically (in a spatially homogeneous manner). These observations/computations can represent a starting point towards the exploration of the interplay of nonlinearity and topology in an experimentally tractable system such as the honeycomb electrical lattice.